MTU DIASYS 2.40SP1 ( New Link )
- Download this document, you need 150 Gallons
MTU DIASYS 2.40SP1 Download
Good Luck
Pass : SarrowLand
readme.txt: (DiaSys 2.40 SP1)
Important Notes:
* This DiaSys version is only for windows 2000 Sp4 or windows XP SP2 runable
* For installing the service pack no deinstallation of DiaSys 2.40 is necessary,
for all other versions deinsatallation is mandatory
* The minimum resolution is 1024x768
* Only for MCS/RCS-Systems and ECU-7:
After the installation of the CAN-Card:
Select in 'Start - Settings - Control Panel - IXXAT Interfaces’
the used CAN Hardware and press ‘Default HW’
* Please read the file 'SystemRequirements_DiaSys_240SP1.doc' with describes
the system requirements
* In some cases the update of the DiaSys windows takes some time
* For the dialog of the ECU-7 the actual file 'ecu7info.dat' is needed.
The newest version of this file is copied to the PC automatically, when a connection to the
central ECU-7 database is made. This file is also available on the MTU FTP Server.
* It's not allowed to change the PC-date after the first start of DiaSys.
If this note will be not considered, DiaSys program will not start and you
have to call the MTU support.
* The time of use for the Hardware Key is limited. The date of becoming
inactive of the Hardware Key can be read out in DiaSys, in the window
"Available functions, Extras, Hardware Key".
* For free hard disk space > 2 GB it's possible that the packer program WinRAR
can not pack files to a volume size other than one file.
* Installation of the CAN-Drivers (only for MCS/RCS-Systems and ECU-7):
The Ixxat-CAN interface driver VCI 2.12 or later and at least a Ixxat
tinCAN V3 card is required.
The tinCAN161 card needs the Ixxat-CAN interface driver VCI 2.16 SP2 or later
and at least DiaSys 2.40.
* The unit's assembly description, created with versions of DiaSys 2.30 or earlier
can not be read by the DiaSys 2.40 program
* In 'Unit's assembly description' 'Options' (german: 'Geraetebeschreibung' 'Optionen')
it is possible to change the standard directory from 'A:' to an other directory.
The next files are placed in the directory c:\diasys\doku and
in the directory [CD-Drive]:\Diasys\Version\Doku
* readme.txt
(this file)
* INSTALLATION_ENGL.DOC:
Describes the installation of DiaSys program (english version).
* INSTALLATION.DOC:
Describes the installation of DiaSys program (german version).
* SystemRequirements_DiaSys_240SP1.doc
System requirements
* update.txt:
New features in DiaSys 2.40 SP1
* diaSys_feedback_e.doc:
If you have found a error or you have some suggestions for improvement
of DiaSys, please send the feedback form back to the MTU.
(english version).
* diaSys_feedback_d.doc:
If you have found a error or you have some suggestions for improvement
of DiaSys, please send the feedback form back to the MTU.
(german version).
* E531920_02E.PDF:
DiaSys manual (english version).
* E531920_02D.pdf
DiaSys manual (german version).
Only for MCS/RCS-Systems and ECU-7:
* vciv2_installation-manual-e_210.pdf
Documentation of the installation of VCI 2.16 SP2 (english version).
* vciv2_installation-handbuch-d_210.pdf:
Documentation of the installation of VCI 2.16 SP2 (german version).
The following files are contained in the directory [CD-Drive]:\Tools
* (ACROBAT READER)
The file ACROBAT READER is required to read acrobat documents (*.pdf)
if no ACROBAT READER is installed on your PC.
* (Word Viewer)
The file WORD VIEWER is required to read WORD documents (*.doc) if no
MICROSOFT WORD is installed on your PC.
* (vci-cleaner)
The files are required to deinstall the Ixxat VCI software.
* (ConvertDB)
Converts project databases created with DiaSys 2.30 SP1
Good Luck
Pass : SarrowLand
readme.txt: (DiaSys 2.40 SP1)
Important Notes:
* This DiaSys version is only for windows 2000 Sp4 or windows XP SP2 runable
* For installing the service pack no deinstallation of DiaSys 2.40 is necessary,
for all other versions deinsatallation is mandatory
* The minimum resolution is 1024x768
* Only for MCS/RCS-Systems and ECU-7:
After the installation of the CAN-Card:
Select in 'Start - Settings - Control Panel - IXXAT Interfaces’
the used CAN Hardware and press ‘Default HW’
* Please read the file 'SystemRequirements_DiaSys_240SP1.doc' with describes
the system requirements
* In some cases the update of the DiaSys windows takes some time
* For the dialog of the ECU-7 the actual file 'ecu7info.dat' is needed.
The newest version of this file is copied to the PC automatically, when a connection to the
central ECU-7 database is made. This file is also available on the MTU FTP Server.
* It's not allowed to change the PC-date after the first start of DiaSys.
If this note will be not considered, DiaSys program will not start and you
have to call the MTU support.
* The time of use for the Hardware Key is limited. The date of becoming
inactive of the Hardware Key can be read out in DiaSys, in the window
"Available functions, Extras, Hardware Key".
* For free hard disk space > 2 GB it's possible that the packer program WinRAR
can not pack files to a volume size other than one file.
* Installation of the CAN-Drivers (only for MCS/RCS-Systems and ECU-7):
The Ixxat-CAN interface driver VCI 2.12 or later and at least a Ixxat
tinCAN V3 card is required.
The tinCAN161 card needs the Ixxat-CAN interface driver VCI 2.16 SP2 or later
and at least DiaSys 2.40.
* The unit's assembly description, created with versions of DiaSys 2.30 or earlier
can not be read by the DiaSys 2.40 program
* In 'Unit's assembly description' 'Options' (german: 'Geraetebeschreibung' 'Optionen')
it is possible to change the standard directory from 'A:' to an other directory.
The next files are placed in the directory c:\diasys\doku and
in the directory [CD-Drive]:\Diasys\Version\Doku
* readme.txt
(this file)
* INSTALLATION_ENGL.DOC:
Describes the installation of DiaSys program (english version).
* INSTALLATION.DOC:
Describes the installation of DiaSys program (german version).
* SystemRequirements_DiaSys_240SP1.doc
System requirements
* update.txt:
New features in DiaSys 2.40 SP1
* diaSys_feedback_e.doc:
If you have found a error or you have some suggestions for improvement
of DiaSys, please send the feedback form back to the MTU.
(english version).
* diaSys_feedback_d.doc:
If you have found a error or you have some suggestions for improvement
of DiaSys, please send the feedback form back to the MTU.
(german version).
* E531920_02E.PDF:
DiaSys manual (english version).
* E531920_02D.pdf
DiaSys manual (german version).
Only for MCS/RCS-Systems and ECU-7:
* vciv2_installation-manual-e_210.pdf
Documentation of the installation of VCI 2.16 SP2 (english version).
* vciv2_installation-handbuch-d_210.pdf:
Documentation of the installation of VCI 2.16 SP2 (german version).
The following files are contained in the directory [CD-Drive]:\Tools
* (ACROBAT READER)
The file ACROBAT READER is required to read acrobat documents (*.pdf)
if no ACROBAT READER is installed on your PC.
* (Word Viewer)
The file WORD VIEWER is required to read WORD documents (*.doc) if no
MICROSOFT WORD is installed on your PC.
* (vci-cleaner)
The files are required to deinstall the Ixxat VCI software.
* (ConvertDB)
Converts project databases created with DiaSys 2.30 SP1
Last edited by a moderator:
More the random threads same category:
- Full Software Volvo IMPACT 2011
- Volvo VCADS Pro V2 Full
- VCDS Lite 1.0 full
- VOLVO IMPACT 2015
- Download Cummins INCAL 04/ 2013 the newest
- Volvo VCADS Pro 2.3.500
- Tech Tool V2.01 FULL Installation
- Perkins SPI 2012A KG
- Volvo prosis 2013 full active
- Metafile for CUMMINS CALTERM
- Allison Doc 8 KG
- WABCO TEBS-E v2.0 Activation + PIN
- How to your ECM with Calterm III
- CAT SIS ET CBT 2012 Master Install
- DVD Software MAN MANTIS EPC Update 477 (02.2012)
