New ZAPI PC Can Console 0.90 Programs

[Leonardobmt]

Download this document, you need 5600 Gallons

ZAPI PC Can Console 090 Programs
Size: 2.28 MB
Language: English, German, Italian
OS: Windows 7, Windows 8, Windows 10 32 & 64 bit(Tested on window 10 pro 1607 64bit)
Version: 0.90
Device Support: IXXAT, IFAK, PEAK USB, KVASER, VECTOR, INFREPID

Version 0.90
--------------
Added - Canopen protocol compliant logbook (if supported by controllers)

Version 0.89
--------------
Added - RMenu mode

Version 0.88
--------------
Improved - Compliant with standard canopen protocol. Specific controller that support it
are required

Version 0.87
--------------
Fixed - Cache directory saving

Version 0.86
--------------
Added - Z86 Files Download.

Version 0.84
--------------
Added - Eeprom range save on file.

Version 0.83
--------------
Improved - Timer Connection.
Fixed - Minor bugs

Version 0.77
--------------
Fixed - Fixed a bug in PTAB parameters' management

Version 0.75
--------------
Improved - Connection for Peak filter canbus off at the startup of the connection

Version 0.74
--------------
Improved - Window for PTab

Version 0.73
--------------
Improved - Window re-connection always at the top

Version 0.72
--------------
Improved - Stability

Version 0.71
--------------
Improved - Stability

Version 0.70
--------------
Added - Receive From Cache
Added - Nopti Options
Removed - Flicker on parameters form.

Version 0.69
--------------
Fixed - Various bugs

Version 0.68
--------------
Improved - AutoTeaching Motor

Version 0.67
--------------
Fixed - Various bugs
Added - Calibration mode (for selected configurtations)

Version 0.66beta15
--------------
Parameters management for applications written using Zapi Platform software

Version 0.66beta14
--------------
Fixed - Various bugs

Version 0.66beta13
--------------
Improved - PEAK devices management

Version 0.66beta10
--------------
Fixed - Acquisition gain current parameter.

Version 0.66beta8
--------------
Fixed - Timestamps during CAN log with IXXAT devices
Fixed - Active alarms cycle with SDO protocol
Added - PWORD management in Receive Par Ext

Version 0.66beta7
--------------
Added - Baudrate 800kbps and 1Mbps

Version 0.66
--------------
Fixed - Zapi console was able to connect to custom controllers

Version 0.65
--------------
Added - JAG Canconsole

Version 0.64
--------------
Fixed - Default parameter download via SDO

Version 0.63
--------------
Added - Handling PTAB parameters.

Version 0.62
--------------
Added - Extended Format for Ixxat, Peak device.

Version 0.61
--------------
Added - AutoTeaching Motor
Added - AutoTeaching Sensor

Version 0.60
--------------
Fixed - Various bugs

Version 0.59
--------------
Bug fixed

Version 0.58
--------------
Fixed - SDO abort handling due to a read only object or value out of range
Fixed - Minor bug in DefaultParam
Fixed - Minor bug in Receive Par Ext

Version 0.58 beta
--------------
Added - New form for dynamic pdo handling
Added - Save/Load pdo dynamic pdo configuration
Fixed - Bug on ForceRemote config

Version 0.57
--------------
Added - Temporized data saving in RecordTester to prevent data loose in case of crash or disconnection
Added - ConnectedLabel with indication of the protocol in use
Fixed - Bug in DefaultParam

Version 0.56
--------------
Added - DefaultParam handling with ForceRemote protocol
Fixed - Bug in Read RAM
Fixed - SDO Abort index visualization

Version 0.55
--------------
Fixed - Various bugs

Version 0.55 beta
--------------
Fixed - Disabled STORE button on Param window
Fixed - Restore from file with WORD data
Fixed - Minor bug on SetNode windows
Fixed - Handling more than 255 param with Remote Protocol
Fixed - Handling of CAN speed through argument
Added - Reconnect after timeout
Added - LongTimeout option
Added - DefaultParam handling

Version 0.54
--------------
Added - Free Dongle Button
Improved - SDO Abort Handling
Improved - CSV Loading
Improved - SetNode window

Version 0.53
--------------
Fixed - Bug with IFAK dongle

Version 0.52
--------------
Fixed - Bug with IXXAT dongle

Version 0.51
--------------
Fixed - Pteach aquisition
Fixed - IXXAT driver loaded dynamically
Fixed - Minor bug with Vector
Added - New window to manipulate parameters
Added - Alarm on tester
Improved - SDO abort handling
Improved - 2 byte param handling

Version 0.50
--------------
Added - 20Kbps and 50Kbps Baud rate
Fixed - Minor bugs fixed

Version 0.49
--------------
Improved - Password handling

Version 0.48
--------------
Fixed - Various bugs fixed

Version 0.47
--------------
Added - Vector supports
Fixed - Bugs fixed

Version 0.46
Version 0.45
Version 0.44
--------------
Added - Kvaser supports
Added - Enhanced can-log propreties
Fixed - Minor bugs fixed

Version 0.43
--------------
Added - Supports more than 255 parameters

Version 0.42
--------------
Fixed - Program VACC procedure requires password
Fixed - Parameter checksum visualisation (where supported)

Version 0.41
--------------
Fixed - Minor Bugs

Version 0.40
--------------
Added - Serial Number acquisition function
Added - Parameter Checksum acquisition function
Added - Information in .csv parameter file
Fixed - CanOpen ID change on the fly

Version 0.39
Version 0.38
--------------
Fixed - Minor Bugs

Version 0.37
Version 0.36
Version 0.35
--------------
Added - Master password

Version 0.34 beta
--------------
Fixed - Bug on clear alarm logbook
Fixed - Some minor bugs
Fixed - Bug on negative parameter's roll
Fixed - Bug on wakeup message with remote protocol
Fixed - Bug on tester menu value appearance for some parameters
Improved - "Teach" parameters' procedure
Improved - "Save/restore" procedure
Added - SDO library versioning for compatibility mode
Added - Security SDO messages on request
Added - Subnode selection for Standard protocol
Added - LEDs on select node form for Zapi node check

Version 0.33
--------------
Fixed - Bug on alarm logbook

Version 0.32
--------------
Improved - Node and subnode Zapi management.
Improved - Increase the max logbook alarm entry

Version 0.31
--------------
Fixed - Some bugs

Version 0.30
--------------
Improved - Stability
Fixed - Password function

Version 0.29
--------------
Fixed - Save and Clear EEPROM commands comply to CANopen standard

Version 0.28
--------------
Fixed - Problem with password

Version 0.27
--------------
Fixed - Problem with ifak device in connection

Version 0.26
--------------
Changed - Password management

Version 0.25
--------------
New - TxFromFile management
Added - CWconsole
Improved - Monitor Canbus
Added - Possibile to custom the new menu for Advanced Open Protocol


Version 0.24
--------------
Added - Monitor Canbus


Version 0.23
--------------
Added - New menu for Advanced Open Protocol


Version 0.22
--------------
Fixed - Fixed Ixxat filter for Advanced Open Protocol


Version 0.21
--------------
Added - WMconsole


Version 0.20
--------------
Added - Protocol Serial Ultra2 (3.13)
Improved - Save/Restore with ultra2 protocol
Improved - Save/Restore Speed.


Version 0.19
--------------
Improved - Menu management and disconnection


Version 0.18
--------------
Fixed - can open id


Version 0.17
--------------
Fixed - Fixed max parameters for save/restore


Version 0.15
--------------
Fixed - Fixed the max parameters


Version 0.14
--------------
Fixed - Fixed the error communication with peak and ifak


Version 0.13
--------------
Fixed - Error in tester menu
Fixed - Action on clear logbook.


Version 0.12
--------------

Version 0.11
--------------

Version 0.10
--------------
Fixed - Some bugs
Added - Peak device


Version 0.01
--------------
First Release.

 

[cranes]

Thanks for your info, i got it

 

[Christopher68]

"It's very good!" I think