JohnDree Service Advisor 4.0 kg Full
HTML
- Thread starter bullseyemods
- Start date
@bullseyemods: prepare yourself for some cash $$$ spending on joobastik if you want info 
https://www.youtube.com/watch?v=Djr0ohkp3ms
- Gallons
- 4,676
unfortunately there is not any way to change the speed of your tractor (especially an IVT) without a payload downloaded directly through " John Deere custom performance" and that is dealer only accessible and its not only as easy as a dealer loading a new payload, Deere requires upgrades to the braking system and balanced rims and tires so it is a very expensive upgrade.
Now one possibility is to retrieve a payload out of a 50k machine ( not sure if its possible to install a payload in a different S/N machine) or... i have heard of but have never seen a tool/kg that allows for payload modification....not sure if it works but id be interested in knowing. ill look for the name of the tool/kg and pass it to you. i searched it once but have forgotten the exact name of it, one thing that would work would be to make a few resister harnesses to put in series with the wheel speed sensor but it may also require resisters in the trans shaft speed sensors.
as for more power....same situation its a Deere payload. but there may be power boxes available or same thing you can make a harness with a resister in it for your map sensor and rail psi sensor.
im sure none of this is of much help or may be everything you already know but this is the best answer i can give at this time
Now one possibility is to retrieve a payload out of a 50k machine ( not sure if its possible to install a payload in a different S/N machine) or... i have heard of but have never seen a tool/kg that allows for payload modification....not sure if it works but id be interested in knowing. ill look for the name of the tool/kg and pass it to you. i searched it once but have forgotten the exact name of it, one thing that would work would be to make a few resister harnesses to put in series with the wheel speed sensor but it may also require resisters in the trans shaft speed sensors.
as for more power....same situation its a Deere payload. but there may be power boxes available or same thing you can make a harness with a resister in it for your map sensor and rail psi sensor.
im sure none of this is of much help or may be everything you already know but this is the best answer i can give at this time