Doosan DMS 1.41
- Download this document, you need 100 Gallons
Doosan Data Monitoring System for use on excavator and wheelloaders 3 & 5 series (newest series)
The Doosan Excavator/Wheel Loader Monitoring Program (also called “DMS-3”) offers
the following functions by connecting Controller (EPOS or VCU) with the user’s IBM PC
compatible PC.
1. Monitoring: You can monitor the current status of equipment installed with
Controller (EPOS or VCU).
2. Graph Output: The major excavator/Wheel Loader sensor data will be displayed in
a graph format. The data can be saved in the hard disk. You can check the
excavator/Wheel Loader’s performance through data comparison and analysis.
3. Force Operation: You can use vehicle diagnosis by forcing Controller (EPOS or
VCU) outputs.
4. Diagnosis: You can check the real-time and past malfunction history maintained by
Controller (EPOS or VCU).
5. History Data: You can analyze the work patterns when using an excavator/Wheel
Loader, by checking the operation hours, filter/oil information, and daily operation
information.
6. Parameter change protected with code: 18772 (change factory settings)
Codes for rpm change/force operation and flash epos: 11830 and/or 18675
Hardware connection
● A separate communication cable is required to establish communication between
Controller (EPOS or VCU). and external PC. The communication cable should be
connected to the excavator/Wheel Loader’s maintenance connector and user PC’s Serial
port. Create your own diagnostic cable, look at my pin layout. Can be used with usb to serial adapter.
The Doosan Excavator/Wheel Loader Monitoring Program (also called “DMS-3”) offers
the following functions by connecting Controller (EPOS or VCU) with the user’s IBM PC
compatible PC.
1. Monitoring: You can monitor the current status of equipment installed with
Controller (EPOS or VCU).
2. Graph Output: The major excavator/Wheel Loader sensor data will be displayed in
a graph format. The data can be saved in the hard disk. You can check the
excavator/Wheel Loader’s performance through data comparison and analysis.
3. Force Operation: You can use vehicle diagnosis by forcing Controller (EPOS or
VCU) outputs.
4. Diagnosis: You can check the real-time and past malfunction history maintained by
Controller (EPOS or VCU).
5. History Data: You can analyze the work patterns when using an excavator/Wheel
Loader, by checking the operation hours, filter/oil information, and daily operation
information.
6. Parameter change protected with code: 18772 (change factory settings)
Codes for rpm change/force operation and flash epos: 11830 and/or 18675
Hardware connection
● A separate communication cable is required to establish communication between
Controller (EPOS or VCU). and external PC. The communication cable should be
connected to the excavator/Wheel Loader’s maintenance connector and user PC’s Serial
port. Create your own diagnostic cable, look at my pin layout. Can be used with usb to serial adapter.
More the random threads same category:
- CAT SIS 2011B license keys
- JohnDree Service Advisor 4.0 kg Full
- John Deere Service Advisor 4.0 Full
- JCB Service Parts Pro - License Keys
- Caterpillar ET 2012B
- Caterpillar SIS 01-2012 Full
- CAT SIS 2013 Full
- CAT ET 2011A Full
- Cat sis 2012 32/64 Full
- Detroit Diesel Diagnostic Link 7.05 (DDDL 7.05) Full
- CAT Electrical Schematic
- CAT SIS 2010A Full
- Caterpillar ET2014A full
- Cat Electronic Technician CAT 2013A v1.0
- Cat SIS full Iinstallation Guide + SIS 2011B + NetworkSISID 2012