Diagnostic Solution ZAPI Can Console 0.58 Doosan (DLE) + Password

[BlueCollarSteve]

Download this document, you need 5600 Gallons

ZAPI Can Console 0.58
Size: 2.74 MB
Interface Language: English, German, French, Other
Os: Winxp, Win7, Win10 (test on Win 10)
Instruction: Just run and use
Version: 0.58
Device Support: IXXAT, IFAK, PEAK USB, KVASER, VECTOR, INFREPID
Function: Parametter, Tester, Logbook, Motor Data, Monitor Canbus,...


PCCANCONSOLE
==================


History release notes

Version 0.58
--------------
Fixed - SDO abort handling due to a read only object or value out of range
Fixed - Minor bug in DefaultParam
Fixed - Minor bug in Receive Par Ext

Version 0.58 beta
--------------
Added - New form for dynamic pdo handling
Added - Save/Load pdo dynamic pdo configuration
Fixed - Bug on ForceRemote config

Version 0.57
--------------
Added - Temporized data saving in RecordTester to prevent data loose in case of crash or disconnection
Added - ConnectedLabel with indication of the protocol in use
Fixed - Bug in DefaultParam

Version 0.56
--------------
Added - DefaultParam handling with ForceRemote protocol
Fixed - Bug in Read RAM
Fixed - SDO Abort index visualization

Version 0.55
--------------
Fixed - Various bugs

Version 0.55 beta
--------------
Fixed - Disabled STORE button on Param window
Fixed - Restore from file with WORD data
Fixed - Minor bug on SetNode windows
Fixed - Handling more than 255 param with Remote Protocol
Fixed - Handling of CAN speed through argument
Added - Reconnect after timeout
Added - LongTimeout option
Added - DefaultParam handling

Version 0.54
--------------
Added - Free Dongle Button
Improved - SDO Abort Handling
Improved - CSV Loading
Improved - SetNode window

Version 0.53
--------------
Fixed - Bug with IFAK dongle

Version 0.52
--------------
Fixed - Bug with IXXAT dongle

Version 0.51
--------------
Fixed - Pteach aquisition
Fixed - IXXAT driver loaded dynamically
Fixed - Minor bug with Vector
Added - New window to manipulate parameters
Added - Alarm on tester
Improved - SDO abort handling
Improved - 2 byte param handling

Version 0.50
--------------
Added - 20Kbps and 50Kbps Baud rate
Fixed - Minor bugs fixed

Version 0.49
--------------
Improved - Password handling

Version 0.48
--------------
Fixed - Various bugs fixed

Version 0.47
--------------
Added - Vector supports
Fixed - Bugs fixed

Version 0.46
Version 0.45
Version 0.44
--------------
Added - Kvaser supports
Added - Enhanced can-log propreties
Fixed - Minor bugs fixed

Version 0.43
--------------
Added - Supports more than 255 parameters

Version 0.42
--------------
Fixed - Program VACC procedure requires password
Fixed - Parameter checksum visualisation (where supported)

Version 0.41
--------------
Fixed - Minor Bugs

Version 0.40
--------------
Added - Serial Number acquisition function
Added - Parameter Checksum acquisition function
Added - Information in .csv parameter file
Fixed - CanOpen ID change on the fly

Version 0.39
Version 0.38
--------------
Fixed - Minor Bugs

Version 0.37
Version 0.36
Version 0.35
--------------
Added - Master password

Version 0.34 beta
--------------
Fixed - Bug on clear alarm logbook
Fixed - Some minor bugs
Fixed - Bug on negative parameter's roll
Fixed - Bug on wakeup message with remote protocol
Fixed - Bug on tester menu value appearance for some parameters
Improved - "Teach" parameters' procedure
Improved - "Save/restore" procedure
Added - SDO library versioning for compatibility mode
Added - Security SDO messages on request
Added - Subnode selection for Standard protocol
Added - LEDs on select node form for Zapi node check

Version 0.33
--------------
Fixed - Bug on alarm logbook

Version 0.32
--------------
Improved - Node and subnode Zapi management.
Improved - Increase the max logbook alarm entry

Version 0.31
--------------
Fixed - Some bugs

Version 0.30
--------------
Improved - Stability
Fixed - Password function

Version 0.29
--------------
Fixed - Save and Clear EEPROM commands comply to CANopen standard

Version 0.28
--------------
Fixed - Problem with password

Version 0.27
--------------
Fixed - Problem with ifak device in connection

Version 0.26
--------------
Changed - Password management

Version 0.25
--------------
New - TxFromFile management
Added - CWconsole
Improved - Monitor Canbus
Added - Possibile to custom the new menu for Advanced Open Protocol


Version 0.24
--------------
Added - Monitor Canbus


Version 0.23
--------------
Added - New menu for Advanced Open Protocol


Version 0.22
--------------
Fixed - Fixed Ixxat filter for Advanced Open Protocol


Version 0.21
--------------
Added - WMconsole


Version 0.20
--------------
Added - Protocol Serial Ultra2 (3.13)
Improved - Save/Restore with ultra2 protocol
Improved - Save/Restore Speed.


Version 0.19
--------------
Improved - Menu management and disconnection


Version 0.18
--------------
Fixed - can open id


Version 0.17
--------------
Fixed - Fixed max parameters for save/restore


Version 0.15
--------------
Fixed - Fixed the max parameters


Version 0.14
--------------
Fixed - Fixed the error communication with peak and ifak


Version 0.13
--------------
Fixed - Error in tester menu
Fixed - Action on clear logbook.


Version 0.12
--------------

Version 0.11
--------------

Version 0.10
--------------
Fixed - Some bugs
Added - Peak device


Version 0.01
--------------
First Release.