Case IH Axial Rotary Combines AXIAL-FLOW 7260 8260 9260 Operators Manual 92671771 2025

[Hyundai]

Download this document, you need 2725 Gallons

Case IH Axial Rotary Combines AXIAL-FLOW 7260 8260 9260 Operators Manual 92671771 2025
Size: 121.41 MB
Format: PDF
Language: English
Brand: Case IH
Type of Machine: Axial Rotary Combines
Type of Manual: Operators Manual
Model: Case IH AXIAL-FLOW 7260, AXIAL-FLOW 8260, AXIAL-FLOW 9260 Axial Rotary Combines
PIN HAJF7E5RLSG260101 and above
Part Number: 92671771
Publication Date: 2025
Number of Pages: 818 Pages

Contents:
GENERAL INFORMATION

Note to the Owner​

Intended use​

Engine tampering​

Electro-Magnetic Compatibility (EMC)​

Cybersecurity declarations​

Manual scope​

Product identification​

Operator's manual storage on the machine​

Machine orientation​

SAFETY INFORMATION

Basic safety rules​

Safety signs – Overview​

General safety rules​

General maintenance safety rules​

Wheel and tire safety​

Transporting on public roads​

Fire prevention​

Fire extinguisher​

Battery safety​

Battery disconnect switch​

Seat belt precautions​

Instructional seat safety​

Operator presence system​

Power Take-Off (PTO) safety rules —Safety rules​

Warning lights​

Air conditioning system​

Reverse alarm​

Personal Protective Equipment (PPE)​

Do Not Operate hang tag​

Hazardous chemicals​

Electrical storm safety​

Utility safety​

Mounting and dismounting precautions​

Operating the machine​

Connecting a header​

Hydraulic system safety​

Working at heights​

Ecology and the environment​

Illustrations​

Lift cylinder lockout​

Feeder fore/aft tilt – Lockout (if equipped)​

Urgent stop button​

Airborne noise emission​

Vehicle vibration levels​

Machine disposal​

Safety signs – Right-hand side​

Safety signs – Front​

Safety signs – Left-hand side​

Safety signs – Rear​

Safety signs – Hood mounted chopper only​

Safety signs – Top​

CONTROLS AND INSTRUMENTS

Access to operator's platform​

Access to operator's platform​

Folding ladder​

Cab layout​

Emergency exit​

Operator's seat​

Operator's seat​

Seat belt – Operator’s seat​

Heated floor mat​

Instructional seat​

Instructional seat – Overview​

Seat belt – Instructional seat​

Under seat cooler​

Forward controls​

Steering column​

Urgent stop button​

Foot controls​

Right-hand side controls​

Threshing controls​

Cleaning controls​

Residue controls​

Start console​

Multi-Function Handle (MFH)​

Unloading tube​

Pivoting unloading spout – if equipped​

Quick stop​

Feedrate control​

AFS Accuguide™​

Automatic Header Height Control (AHHC)​

Configurable header position control – Header position switch​

Configurable reel position control​

Configurable position control Setting​

Feeder fore/aft tilt – In cab adjustment​

Grain tank unloading drive​

Shift button​

Right-hand console​

Drive engagement switches​

Reel drive – Controls​

Rotor speed – Switch​

Concave clearance – Controls​

Rotor discharge deflector switch​

Adjustable cage vane switch​

Cleaning fan speed control – Switch​

Pre-sieve opening – Switch​

Upper sieve – Switch​

Lower sieve – Switch​

Gear selector​

Throttle control​

Chopper counter knife – Position switch​

Spreader speed – Control switch​

Spread distribution – switch​

Deflector – Right-hand switch​

Deflector – Left-hand switch​

Parking brake​

Powered Rear Axle (PRA) – Control​

High/Low – Control​

Header height control​

Feeder – Controls​

Vertical knife – Control​

Display​

Armrest - Overview​

Rearward controls​

Rear window​

Cab features – Storage and fuse access​

Overhead controls​

Overhead controls​

Sun screens​

Cab climate control system​

Overhead storage​

Cab radio - DEA730 radio​

Phone app​

Interior lamps​

Communication equipment – Mounting​

Exterior controls​

Exterior switches – Locations​

Battery disconnect switch – operation​

Display​

AFS®Pro 1200 display – Introduction​

AFS®Pro 1200 display – Overview​

Notification bar​

Machine status area​

Work switch status​

Faults & Warnings​

Global Navigation Satellite System (GNSS)​

Applications​

Help​

Clock​

User Profiles​

Menu - Settings​

Menu screens​

System settings​

Header settings​

Combine settings​

Procedures & Calibration​

Diagnostics​

Header diagnostics​

Combine diagnostics​

Productivity​

Overview​

Procedures & Calibration​

Calibrations​

Procedures​

Calibrations​

Steering valve – Sample​

Calibration error list​

Procedures​

Kill stall​

Sieves – Pressure sensor test​

Rotor Loss Sensor – Test​

Axial Trac suspended tracks – Tension / Untension​

Sieve Loss Sensor – Test​

Run screens​

Sensitivity settings​

Clean out control​

Machine lighting​

Lighting and mirrors​

Machine access​

Engine platform access​

Side shields - Open/Close​

Service platforms and shielding​

Rotor module – Access​

Grain tank access​

Grain tank – Covers/extensions​

Adjustable threshing cage – Access​

Straw chopper – Service step​

Lifting points – Locations​

OPERATING INSTRUCTIONS

Commissioning the unit​

Before driving the combine​

Axial Trac​

Track Transmission Unlock​

Starting the unit​

Daily start up procedure​

Starting the engine – Cold weather​

Engine control system - Control​

Stopping the unit​

Stopping the engine​

Moving the unit​

Moving the machine​

Road travel​

Operator platform extension – Removal​

Operator platform extension – Installation​

Axial Trac – Road travel​

Axial Trac – Track pre-conditioning​

Parking brake – Manual release​

Transmission – Manual shifting​

Parking the unit​

Wheel chock​

TRANSPORT OPERATIONS

Preparing for road transport​

Attaching a trailer​

Shipping transport​

Transporting on a trailer – Tie downs for shipping​

Recovery transport​

Towing the machine​

WORKING OPERATIONS

General information​

Introduction to harvesting​

Performance indicators​

Losses​

Initial crop settings - AFX Rotor​

Initial crop settings – Small tube rotor 40E​

Initial crop settings – Small tube rotor 36E​

Kill-Stall diagnosis​

Crop setup values – Crop condition adjustment​

HEADER HEIGHT CONTROL​

Header height control overview​

Header height control – Manual mode​

Header height control – Sensitivity​

Header height control – Return To Cut (RTC) mode​

Header height control – Auto Header Height Control (AHHC)​

Header height control – Pressure float mode​

Header height control​

Automatic Crop Settings (ACS)​

Automatic Crop Settings (ACS)​

AFS Harvest Command™​

AFS Harvest Command™ – Overview​

AFS Harvest Command™ – Activation​

AFS Harvest Command™ – Run screen​

AFS Harvest Command™ – Basic tab​

AFS Harvest Command™ – Advanced tab​

AFS Harvest Command™ – Sensitivities tab​

AFS Harvest Command™ – Headland tab​

AFS Harvest Command™ – Ranges tab​

AFS Harvest Command™ – Status tab​

AFS Harvest Command™ – Information​

AFS Harvest Command™ – Operation​

AFS Harvest Command™ – Sensitivity adjustment​

HEADER CONNECTION​

Connecting a header​

Disconnecting a header​

Header setup​

Combine corn header – Set up​

Grain header – Set up​

Draper/Varifeed™ header – Set up​

Pickup header – Set up​

FEEDING​

Feeding​

Rock trap​

Feeder cradle – Manual adjustment​

Feeder cradle – Angle adjustment per tire size​

Feeder drum – Adjust lower stop​

Feeder chain – Adjustment​

Feeder chain – Link removal​

Reel speed​

Feeder reverse system - Overview​

Feedrate control​

THRESHING​

Rotor​

Rotor configurations – AFX Rotors​

Rotor configurations – 40E Rotor​

Rotor configurations – 36E Rotor​

Rotor cage – Module overview​

Concave – Position overview​

Rotor cage – Position adjustment​

Rotor cage – Leveling​

Rotor cage – Side shift adjustment​

Rotor cage – H–frame stop bolt adjustment​

Threshing and separation​

Suggested start up configurations for major crops​

Rotor overview​

Rotor De-slug​

CLEANING​

Cleaning – Overview​

Sieves – Removal​

Sieves – Installation​

Aggressive throwing angle kit​

Cleaning fan​

Automatic cleaning fan speed – If equipped​

GRAIN HANDLING​

Tailings system​

Grain storage​

Clean grain elevator drive – Change speeds​

Unloading​

Unloading​

Folding unload tube – Transport lock​

RESIDUE HANDLING​

Residue handling​

Discharge deflector​

Straw chopper – Adjustments​

Magnacut chopper​

Straw chopper – Magnacut chopper​

Knife replacement – Magnacut counter knife​

Knife replacement – Chopper​

Shear bar​

Horizontal Disc Spreader​

Horizontal Disc Spreader​

Residue handling – Horizontal disc spreader configuration​

Vertical impeller spreader​

Vertical impeller spreader – Position​

Vertical impeller spreader – Spread width adjustment​

Vertical impeller spreader – Manual adjustment​

Vertical impeller spreader – In cab spreader controls (if equipped)​

Auto Spread Control​

Center divider – Adjustment​

Center divider – Impeller clearance adjustment​

Spreader chutes – Manual adjustment​

Windrow door​

Windrow chute​

Chaff pan​

In cab residue mode control​

In cab residue mode control – Troubleshooting​

Residue handling – Vertical impeller spreader configuration​

Hood mounted chopper​

Hood mounted chopper – Overview​

Initial settings​

Internal deflectors​

Chopper speed​

Counter knife​

Spreader board – Height adjustment​

Fin position​

Chaff board​

Windrow roller​

Chaff spreader - Crop setting and Straw fingers​

Windrow operation​

Counter knife – Blades​

Straw chopper​

Hood mounted chopper – Sieve removal​

Troubleshooting​

Residue handling – Hood mounted chopper configuration​

MAINTENANCE

General information​

Maintenance - Overview​

Torque specifications for hardware​

Torque - Standard torque data for hydraulic connections​

Chain wear tables - Roller chain​

Battery – Overview​

Battery vent system – Overview​

Battery – Charging and jump starting​

General specification - Biodiesel fuels​

Organic Acid Technology (OAT) coolant​

Recommended engine oil for operating temperature ranges​

Maintenance planning​

Maintenance chart​

Every 10 hours or daily during the first week​

Wheel bolt torque​

Every 10 hours or daily​

Stationary air screen​

Check the engine oil level​

Power Take Off (PTO) gearbox oil level​

Hydraulic oil tank – Oil level​

Rock trap​

Deaeration tank coolant level​

Quadtrac® – Inspection​

ActiveTrac 4-Roller Track – Suspended track Inspection​

Hood mounted chopper – Cleaning​

Hood mounted chopper – Straw chopper blades​

Hood mounted chopper – Counter knife blades​

Every 50 hours​

Tire pressure – Check​

Cab fresh air filter​

Cab air recirculation filter​

Feeder conveyor chain​

Chain and belt tension​

Track roller - Check Oil level check​

Quadtrac® – Alignment​

Magnacut chopper – Speed adjustment​

Hood mounted chopper – Drive system inspection​

Hood mounted chopper – Drive belt tension​

Every 100 hours​

100-hour grease points​

Feeder chain drive – Grease​

Chain maintenance​

Every 300 hours​

300 hour grease points​

Bubble-up gearbox oil – Oil level check​

Transmission oil level​

Final drive oil level​

Lower unloading gearbox – Oil level​

Feeder conveyor gearbox – Oil Level​

Header drive gearbox oil – Oil level​

Rotor gearbox oil – Oil level​

ActiveTrac 4-Roller Track – Alignment​

Every 600 hours or beginning of the season​

Tailings sensor – Lens inspection​

Every 600 hours​

600 hour grease points​

Header drive gearbox oil​

Feeder conveyor gearbox​

Transmission – Change oil​

Final drive oil – Change oil​

Lower unloading gearbox – Change oil​

Unloading elbow oil level​

Tailings gearbox​

Bubble-up gearbox oil – Change oil​

Rotor gearbox oil​

Self leveling cleaning shoe pivot​

Power Take-Off (PTO) gearbox – Oil change​

Hydraulic oil return filter – Replace​

Hydraulic charge filter – Replace​

Engine oil and filter​

Fuel prefilter/water separator​

Engine mounted fuel filter​

Engine crankcase breather filter​

Hood mounted chopper – Drive bushing service​

Fuel tank breather​

Every 1200 hours or two years​

Fuel tank strainer​

Every 1200 hours​

Hydraulic reservoir, oil, and filters​

Power Take Off (PTO) – Lube filter​

Every 1500 hours​

Quadtrac® – Oil change 30 inch and 36 inch tracks​

ActiveTrac 4-roller Track and non-suspended tracks – Oil change​

Every 2400 hours​

Engine valve adjustment​

Every 4000 hours or every four years​

Engine coolant replacement​

As required maintenance​

Machine cleaning​

Machine cleaning​

GrainCam™ – Cleaning​

Tailings – Sensor cleaning​

Tailings sensor – Lens replacement​

Filling the fuel tank​

Air cleaner - Replace​

Air cleaner safety element​

Quadtrac®​

Stationary air screen – Externally aspirated inlet screen​

Windshield washer resevoir​

Fuel system bleeding​

Roof lights​

Clean fresh air intake screen​

Hood mounted chopper – Drive belt replacement​

Steering toe in​

Rear axle steering cylinder - Adjust​

Steering stop bolts – Adjustment​

Fuse and relay locations​

Fuses and relays​

Storage​

Post-season – Service​

Preseason service​

TROUBLESHOOTING

Fault code resolution​

Display alarms​

Automatic Temperature Control (ATC) system – Alarms​

GrainCam™ – Alarms​

SPECIFICATIONS

Tire care​

Drive tire – Overview​

Wheel removal​

Single drive wheel – Mounting​

Floatation drive wheel – Mounting​

Dual drive wheel – Mounting​

Temporary transport – Single wheel​

Axial Trac​

Steering wheel​

Steering axle – Overview​

Powered Rear Axle (PRA) – Hose routing​

Spindle height position​

Tread width – Rear axle​

Approved tires and tracks – 7260/8260/9260​

Machine specifications​

Capacities​

ACCESSORIES

Optional equipment​

FORMS AND DECLARATIONS

Delivery report - Owner Copy​

Delivery report - Dealer Copy​

Service record - 1st 50 Hour, Customer Copy​

Service record - 1st 50 Hour, Dealer Copy​

Axial Trac – Workshop data sheet​

Axial Trac – Difficult to align - Report​