Bomag Single Drum Roller BW211D-40 To BW213PD-40 Operating Instructions 00815881

[Hubert Veidt]

Download this document, you need 750 Gallons

Bomag Single Drum Roller BW211D-40 To BW213PD-40 Operating Instructions 00815881
Size: 3.12 MB
Format: PDF
Language: English
Brand: Bomag
Type of Machine: Single Drum Roller
Type of Manual: Operating Instructions
Model: Bomag Single Drum Roller
BW211D-40, BW212D-40, BW213D-40, BW211BWPD-40, BW212PD-40, BW213PD-40,
Part Number: 00815881
Publication Date: 2008
Number of Pages: 130 Pages

Contents:
Technical Data
Safety regulations
Indicators and Controls
3.1 General notes
3.2 Description of indicators and control elements
3.3 Display and control elements BTM
3.4 Description of indicating and control elements
BTM
3.5 Line diagram (EVIB)
3.6 Description of line diagram (EVIB)
3.7 Bar diagram (EVIB)
Operation
4.1 General notes
4.2 Tests before starting to operate
4.3 Disarming the anti-theft protection
4.4 Starting the engine
4.5 Starting with jump wires
4.6 Driving the machine
4.7 Switching the vibration on and off
4.8 Operating the parking brake, stopping the machine
4.9 Shutting the engine down
4.10 Emergency exit
4.11 Adjusting the steering wheel
4.12 Adjusting the seat
4.13 Operating the hood
4.14 Towing in case of an engine failure
4.15 Transport
4.16 BTM 05 settings before start-up
4.17 Measuring pass with BTM
4.18 Finishing compaction of a track
4.19 Printing measuring data after completing compaction
4.20 Changing the paper roll in the measuring value printer
4.21 Changing the printer ribbon in the measuring value printer
Maintenance
5.1 General notes on maintenance
5.2 Fuels and lubricants
5.3 Table of fuels and lubricants
5.4 Running-in instructions
5.5 Maintenance chart
5.6 Check the engine oil level
5.7 Check, clean the water separator
5.8 Checking the fuel level
5.9 Checking the hydraulic oil level
5.10 Checking the coolant level
5.11 Checking the dust separator on the oil bath air filter
5.12 Checking the tire pressure
5.13 Clean the cooling fins on engine and hydraulic oil cooler
5.14 Check the oil level in the drive axle
5.15 Checking the oil level in left/right wheel hubs
5.16 Checking the oil level in the vibration bearing housings
5.17 Changing engine oil and oil filter cartridges
5.18 Draining the fuel tank sludge
5.19 Service the battery
5.20 Check condition and tension of refrigerant compressor V-belt, replace the Vbelt
5.21 Service the air conditioning
5.22 Check, adjust the valve clearance
5.23 Checking / replacing the ribbed V-belt
5.24 Change the fuel filter cartridge
5.25 Change the fuel pre-filter cartridge
5.26 Check the engine mounts
5.27 Change the oil in the drive axle
5.28 Changing the oil in the wheel hubs
5.29 Changing the oil for the vibration bearings
5.30 Retighten the fastening of the axle on the frame
5.31 Tightening the wheel nuts
5.32 Checking the ROPS
5.33 Cleaning the oil bath air filter
5.34 Changing the hydraulic oil and the breather filter
5.35 Changing the hydraulic oil filter
5.36 Changing the coolant
5.37 Checking the injection valves
5.38 Cleaning, changing the dry air filter cartridge
5.39 Adjusting the scrapers
5.40 Adjusting the parking brake
5.41 Changing the tires
5.42 Changing the fresh air filter in the cabin
5.43 Tightening torques
5.44 Engine conservation
Trouble shooting
6.1 General notes
6.2 Engine