[HOT 2025] AGCO EDT 09.2025 Electronic Diagnostic Tool

[Darylxd]

Download this document, you need 18750 Gallons

AGCO EDT 09.2025 Electronic Diagnostic Tool
Size: 44.5GB (WinRAR Files)
Interface Languages: English, Dutch, French, Finnish, German, Spanish, Portuguese, Danish, Russian, Polish, Italian, Turkish, Swedish, Chinese, Norwegian Bokmål.
Database Languages: Only English
Type of software: AGCO EDT (Electronic Diagnostic Tool)
Type of vehicle: Agricultural
Update: 09.2025
OS: Windows 10, Windows 11 64 & 86 bit (Tested on Windows 10 Pro 22H2 64-bit)
Supporter: Present
Send an email to get the password: "admin@autorepairmanuals.ws, Gallons@autorepairmanuals.ws"

NOTE: " DO NOT HAVE FENDIAS IN THIS AGCO EDT"

Release Notes – 8/27/2025 – Update 2025.4

EDT NOTES:​

EDT Version: 1.128.25190.1121​

Bug Fixes:​

Enhancements:​

• Updated WinSCP to version 6.5.2
• Minor improvements to diagnostic functionality.

Vehicles Affected:​

• Challenger: WR9900 Series
• Massey Ferguson: WR9900 Series

Vehicle Version:​

• 1.67

Software:​

• NT03 v5.00.17
  • Fix header float conversion between imperial and metric
  • Fix USB icon stays active when USB is removed
  • Fix secondary monitor freeze in some circumstances
  • Fix primary monitor crash when shifting into rear steer
  • Fix guidance overlap not being maintained in both directions
  • Fix not applying overlap after key switch but still showing right value

Vehicles Affected:​

• Massey Ferguson: Square Balers: 2224, 2233, 2234, 2234XD, 2244
• Fendt: Square Balers: 990, 1270, 1290, 1290XD, 12130

Vehicle Version:​

• 1.37

Diagnostics:​

• Add virtual CAN-Bus to monitor availability of ECUs while connected to ISOBUS connector.
• Make backup of EEPROM before upgrading software

Configuration:​

• Add possibility to change electronic/mechanical knotter trip without an authorization key

Software:​

• EXT 01.14.01
  • Fix sending amount of cut bales to ACM and Infotrac at startup
  • Fix sending cutter override alarm when override is active and not only while button is pressed
  • Change delay for missing machine speed to 60 seconds to give ACM time to get started
  • Fix having active parking brake alarms after parking brake has been turned off
  • Fix displaying a double indicator when both load bullets are not sending values
  • Improve load bullet diagnostics
  • Fix having infobox items available for moisture system that was previously connected

Vehicles Affected:​

• Challenger: 660B made in Brazil, 670B made in Brazil, 680B made in Brazil
• Massey Ferguson: 9695 made in Brazil, 9795 made in Brazil, 9895 made in Brazil
• Valtra: BC6800, BC7800, BC8800

Vehicle Version:​

• 1.36

Configuration:​

• The “internal error” no longer occurs when opening the Combine Setup configuration page.

Vehicles Affected:​

• Challenger: 520C
• Challenger: 540C
• Challenger: 560C
• Massey Ferguson: 9595S
• Massey Ferguson: 9695S
• Massey Ferguson: 9795S
• Massey Ferguson: 9895S
• Valtra: 6800
• Valtra: 7800

Vehicle Version:​

• 1.62

General:​

• Software update for EMU and VMM, replacement of the MVEC with HCDM
• Guidance System only AGS-2
• Monitor only X35

Diagnostics:​

• Shaft Speeds: added block with active tailboard – spinners speed
• Replaced all the relays of MVECs with HCDMs

Configuration:​

• Added 2 more options for discharge type: Chopper -active tailboard, straw spreader – Hyd

Software:​

• VMM ver. BB: 5.38 b63; LL: 0.66 b101
• EMU ver. 6.6

Plug-Ins:​

• Removed AGCOCOMMAND, AG3000

Vehicles Affected:​

• Massey Ferguson: 2700-4700 Series
• Massey Ferguson: 6700R Series
• Massey Ferguson: Global Series 4700-5700-6700
• Valtra: A100
• Valtra: A100Hitech Series
• Valtra: A4, A4S
• Valtra: A4Hitech Series
• Valtra: AC52.5, AC54.5, AC56.5