Yanmar Excavator Vi080-1 Operation and Maintenance Manual 0AKB3-EN0055

[Hyundai]

Download this document, you need 500 Gallons

Yanmar Excavator Vi080-1 Operation and Maintenance Manual 0AKB3-EN0055
Size: 20.10 MB
Format: PDF
Language: English
Brand: Yanmar
Type of Machine: Excavator
Type of Manual: Operation and Maintenance Manual
Model: Yanmar Vi080-1 Excavator
Serial Number: 10501 & Above
Part Number: 0AKB3-EN0055
Number of Pages: 346 Pages

Contents:
COVER
1. Introduction
2. Safety Information
3. Product Overview

3.1 Intended uses​

3.2 Break in period​

3.3 Conditions to be met to assure compliance with EPA emission standards Conditions de conformité avec les standards d’émission EPA​

3.4 Emission system warranty Garantie du systéme antipollution​

3.5 Acquisition of Information on Machines in Operation and Handling of Acquired Information​

4. Operation License
5. Ordering Replacement Parts and Service Calls

5.1 Location of machine serial number plate​

5.2 Location of engine serial number plate​

5.3 Location of EPA emission control plates Localisation de la plaque signalétique EPA​

5.4 Ordering replacement parts and service calls​

QUICK GUIDE
CONTENTS
SAFETY

1. Basic Precautions​

2. Operating Precautions​

2.1 Precautions before starting the engine​

2.2 Precautions for starting the engine, working and parking​

2.3 Precautions for transportation​

2.4 Precautions for the battery​

2.5 Precautions for towing​

3. Precautions for Servicing​

3.1 Precautions before servicing​

3.2 Precautions during servicing​

4. Safety Messages (Warning Labels)​

4.1 Location of warning labels​

OPERATION

1. Identification of Important Parts​

1.1 Overview of the machine​

1.2 Controls and switches​

2. Description of Control Devices​

2.1 LCD Monitor​

2.2 Switches​

2.3 Control levers and pedals​

2.4 Engine hood​

2.5 Bonnet B​

2.6 Bonnet R​

2.7 Storage compartment for the operation & maintenance manual​

2.8 Tool storage space​

2.9 Windshield​

2.10 Hammer for emergency escape from operator’s cab​

2.11 Operator’s seat​

2.12 Headlight​

2.13 Ash tray​

2.14 Right window glass​

2.15 Cabin side door​

2.16 Handling Air Conditioner​

2.17 Replenishment of windshield washer fluid​

2.18 Fuse​

2.19 External power socket​

3. Operating Instructions​

3.1 Checking before starting the engine​

3.2 Starting up the engine​

3.3 Operating and checking instructions after starting the engine​

3.4 Traveling​

3.5 Steering​

3.6 Stopping the machine​

3.7 Swinging the upperstructure​

3.8 Operating the implement​

3.9 Precautions for operating the implement​

3.10 Precautions for working​

3.11 Precautions for going up and down a slope​

3.12 Escaping from the mud​

3.13 Operations using the bucket​

3.14 Parking the machine​

3.15 Inspection requirements after completing operation​

3.16 Stopping the engine​

3.17 Inspection requirements after stopping the engine​

3.18 Locking​

3.19 Handling the rubber crawlers​

3.20 Replacing the bucket without the quick coupler​

3.21 Reversing the bucket without the quick coupler​

3.22 Handling quick coupler​

3.23 Handling hydraulic P.T.O.​

3.24 Releasing the internal pressure of the hydraulic circuit by accumulator​

3.25 Handling SMARTASSIST-Remote (option)​

4. Transportation​

4.1 Loading and unloading the machine​

4.2 Precautions for loading the machine​

4.3 Precautions for transporting the machine​

4.4 Suspending the machine​

5. Care and Service in Cold Weather​

5.1 Preparing for cold weather​

5.2 Precautions after a day's work​

5.3 After cold weather ends​

6. Long-term Storage​

6.1 Before storing​

6.2 Storing​

6.3 Using the machine again​

7. Troubleshooting​

7.1 Phenomena that do not constitute faults​

7.2 Towing​

7.3 If the battery is overdischarged​

7.4 Troubleshooting​

MAINTENANCE

1. Precautions for Servicing​

2. Basic Servicing Practices​

2.1 Oils, fuel, and cooling water​

2.2 Electrical equipment​

2.3 Hydraulic system​

3. Consumables​

4. Fueling, Oiling and Greasing Based on Temperature Range​

4.1 Fuel and oil​

4.2 Cooling water​

5. Standard Tightening Torque for Bolts and Nuts​

5.1 Required tools​

5.2 Torque table​

6. Replacing Essential Parts Periodically​

7. Maintenance Table​

7.1 Table of service time intervals​

7.2 Service intervals when using the hydraulic breaker​

8. Procedures for Maintenance​

8.1 First services​

8.2 Nonperiodic services​

8.3 Checking before start-up​

8.4 Maintenance every 50 service hours​

8.5 Maintenance every 100 service hours​

8.6 Maintenance every 250 service hours​

8.7 Maintenance every 500 service hours​

8.8 Maintenance every 1000 service hours​

8.9 Maintenance every 1500 service hours​

8.10 Maintenance every 2000 service hours​

8.11 Maintenance every 3000 service hours​

SPECIFICATIONS AND DIMENSIONAL DIAGRAMS

1. Specifications and Dimensional Diagrams​

OPTIONAL PARTS AND ATTACHMENTS

1. General Precautions​

1.1 Safety precautions​

1.2 Precautions for mounting an attachment (implement)​

APPENDIX TABLE

1. List of consumables​

2. Fuel, oil and cooling water​

3. Required tools​

4. Torque table​

5. List of essential parts​

6. List of error codes displayed on LCD monitor​