Wacker Neuson Excavator 803 Operating Manual 1000161857

[Martin Welker]

Download this document, you need 500 Gallons

Wacker Neuson Excavator 803 Operating Manual 1000161857
Size: 15.04 MB
Format: PDF
Language: English
Brand: Wacker Neuson
Type of Machine: Excavator
Type of Manual: Operating Manual
Model: Wacker Neuson 803 Excavator
Part Number: 1000161857
Publication Date: 2010
Number of Pages: 116 Pages

Contents:
Operator's Manual
Table of contents
1 Introduction
1.1 Important information on this Operator's Manual
1.2 Machine overview
1.3 Brief description
Travelling drive
Work hydraulics
Cooling system
ROPS rollbar
1.4 Fields of application, attachments
Use: attachment
1.5 Regulations
1.6 ROPS rollbar
1.7 EC Declaration of Conformity version 803 RD
1.8 Type labels and component numbers
1.9 Other signs and symbols
2 Safety instructions
2.1 Identification of warnings and dangers
2.2 Warranty
2.3 Designated use and exemption from liability
2.4 General conduct and safety instructions
Organisational measures
Selection and qualification of staff, basic responsibilities
2.5 Safety instructions regarding operation
Normal operation
Applications with lifting gear
Trailers and attachments
Transport
2.6 Safety instructions for maintenance
2.7 Warning of special hazards
Electrical energy
Gas, dust, steam, smoke
Hydraulics
Noise
Oil, grease and other chemical substances
Battery
Tracks
3 Operation
3.1 Control stand overview
3.2 Indicators: overview
3.3 Putting into operation
Safety instructions
Putting the machine into operation for the first time
Running-in period
Check lists
Start-up checklist
Operation checklist
Parking checklist
3.4 Driving the excavator
Ignition lock
Throttle
Telltales and warning lights: overview
Before starting the engine
Starting the engine: general
Procedure
When the engine has started ...
Engine warm-up
Jump-starting the engine (supply battery)
Special instructions for driving on public roads
Moving off
Drive levers
Hydraulic brake
3.5 Driving on slopes
Specific safety instructions
Driving on slopes
Stabiliser blade operation
Telescopic undercarriage
Upper carriage lock
Parking the machine
Parking the machine on slopes
Light system
Seat adjustment
Foldable ROPS rollbar (option)
Folding the rollbar up and down:
Lowering and raising the rollbar
Seat belt
Engine cover
Towing the track excavator
Towing
Crane handling the machine
Loading and transporting the machine
Tying down the machine
3.5 Working with the machine
General safety instructions
3.6 Control levers: overview
Left-hand side control lever
Boom swivel controls
Auxiliary hydraulics
Right-hand side control lever
Lowering the boom with the engine stopped
Rotating the upper carriage
Upper carriage deceleration
Locking the control elements
3.7 Re-equipping attachments
Specific safety instructions
Removing a bucket
Mounting a bucket
Connections for auxiliary hydraulics
Attachments
Maintenance of attachments
Working with the standard bucket
Inadmissible work
Excavator work position
Bucket position when digging
Excavating trenches
Loading
Grading
Excavating trenches sideways
3.8 Grading
Grading
Working alongside trenches
4 Troubleshooting
4.1 Engine trouble
5 Maintenance
5.1 Introduction
5.2 Fuel system
Specific safety instructions
Refuelling
Draining the fuel
Stationary fuel pumps
Diesel fuel specification
Bleeding the fuel system
Fuel prefilter with water separator
5.3 Engine lubrication system
Checking the oil level
Draining engine oil
Filling up engine oil
5.4 Engine cooling system
Specific safety instructions
Checking/filling up coolant
5.5 Air filter
Replacing the filter
5.6 V-belt
Checking V-belt tension
Retightening the V-belt
5.7 Hydraulic system
Specific safety instructions
Checking the hydraulic oil level
Filling up hydraulic oil
Important information for the use of biodegradable oil
Checking hydraulic pressure lines
5.8 Tracks
Checking track tension
Setting the tracks
5.9 Travelling drive
5.10 Electrical system
Specific safety instructions
Service and maintenance work at regular intervals
Instructions concerning specific components
Alternator
Battery
5.11 General maintenance work
Cleaning
General instructions for all areas of the machine
Control stand
Exterior of the machine
Engine compartment
Screw connections and attachments
Pivots and hinges
5.12 Fluids and lubricants
Additional oil change and filter replacement (hydraulics)
5.13 Maintenance plan (overview)
5.14 Maintenance label
Explanation of symbols on the maintenance label
6 Specifications
6.1 Chassis
6.2 Engine
6.3 Hydraulic system
6.4 Undercarriage and swivel unit
6.5 Stabiliser blade
6.6 Work hydraulics
6.7 Electrical system
Fuses behind the right-hand side trim
Relays behind the right-hand side trim
6.8 Noise levels
6.9 Vibration
6.10 Coolant compound table
6.11 Dimensions model 803 RD
6.12 Lift capacity table 803 RD