VAS-PC/ODIS Flash Discs (UPDATED 26/6/2020)
- Download this document, you need 0 Gallons
VAS-PC/ODIS Flash Discs (UPDATED 26/6/2020)
VW Flash Disk (6.2020):
VW Commercial Flash Disk (6.2020):
Audi Flash Disk (6.2020):
Seat Flash Disk (6.2020):
Skoda Flash Disk (6.2020):
Bentley Flash Disk (6.2020):
Lamborghini Flash Disk (6.2020):
VAS-PC Offline Update Programming Procedure:
--------------------------------------------
• Insert the Update Programming CD into your PC.
• Minimize or Run your VAS-PC.
• Open "My Computer".
• Open your "E:" Drive. A folder named "datflash" and a file named "label" will be
displayed on the screen.
• Minimize the window.
• Open "My Computer" to open up a new window.
• Open your "C:" drive.
• Open the "SIDIS" folder.
• Open the "Home" folder.
• Copy/Paste the folder named "datflash" to the "Home" folder.
• Close both open windows and maximize the VAS-PC screen.
• Remove programming CD from your PC.
• Activate Vehicle Self Diagnosis from your VAS-PC and select
On Board Diagnostic (OBD).
• Select appropriate address word for module being updated
• At the bottom of the screen, select 019 – Update Programming.
Note the files have to be for the control unit you are going to flash.
The VAS-PC will NOT let you flash a TDi to a Transmission or
a DSG to a 5sp auto. The file needs to be writen for that specific control unit.
Some times there is a compainion file that the VAS-PC reads and make that
dertimination of weither to flash or NOT!
VW Flash Disk (6.2020):
VW Commercial Flash Disk (6.2020):
Audi Flash Disk (6.2020):
Seat Flash Disk (6.2020):
Skoda Flash Disk (6.2020):
Bentley Flash Disk (6.2020):
Lamborghini Flash Disk (6.2020):
VAS-PC Offline Update Programming Procedure:
--------------------------------------------
• Insert the Update Programming CD into your PC.
• Minimize or Run your VAS-PC.
• Open "My Computer".
• Open your "E:" Drive. A folder named "datflash" and a file named "label" will be
displayed on the screen.
• Minimize the window.
• Open "My Computer" to open up a new window.
• Open your "C:" drive.
• Open the "SIDIS" folder.
• Open the "Home" folder.
• Copy/Paste the folder named "datflash" to the "Home" folder.
• Close both open windows and maximize the VAS-PC screen.
• Remove programming CD from your PC.
• Activate Vehicle Self Diagnosis from your VAS-PC and select
On Board Diagnostic (OBD).
• Select appropriate address word for module being updated
• At the bottom of the screen, select 019 – Update Programming.
Note the files have to be for the control unit you are going to flash.
The VAS-PC will NOT let you flash a TDi to a Transmission or
a DSG to a 5sp auto. The file needs to be writen for that specific control unit.
Some times there is a compainion file that the VAS-PC reads and make that
dertimination of weither to flash or NOT!
More the random threads same category:
- Delphi/AuTocom 2013.2 with update 1 [Activation, CDP, CDP+,ADP186,SDP]
- Mitchell OnDemand 2015 + Mitchell Manager Torrent
- Autocom/delphi 2013.1 Full
- AutoCom/Delphi 2013.3 Activator!!!! Also Including My Delphi 2013.3 Super Easy Installer by SuperS
- Delphi/Autocom 2013.R3 How to install
- Autocom & Delphi 2013 R1 Activator patch Works Fine
- Autocom 2013 R2 Full
- TachoSoft Mileag Calculator 25.9 - 2016 full
- Autocom CDP 2013.R1 FULL
- KG Vivid Workshop DATA ATI v.10.2 + Instruction
- Autocom CDP+ Delphi 2014.Release 1 Update Full
- DELPHI DIAMAND [02.2016]
- Delphi><Autocom Keygen 2013.3 Xml file activator
- Autocom - Delphi 2012.3 Full
- NYO4 calculator Torrent