New AGCO EDT 05.2024 Diagnostic Solution

[Autoequipment]

Download this document, you need 18750 Gallons

AGCO EDT V1.126.24065.1048 05.2024 Diagnostic Software
Size: 39.48GB (Winrar Files)
Interface Languages: English, Dutch, French, Finnish, German, Spanish, Portuguese, Danish, Russian, Polish, Italian, Turkish, Swedish Sweden, Chinese, Norwegian- Bokmal.
Database Languages: Only English
Type of software: AGCO EDT (Electronic Diagnostic Tool)
Type of vehicle: Agricultural
Version: 1.126.24065.1048 05.2024
OS: Windows 7, Windows 8, Windows 8.1, Windows 10 x64 & x86 (Tested on window 7 64bit ultimate & Window 10 pro 22H2 64bit)
Installation: Multiple PCs
Instruction: Present
Supporter: Present
Send an email to get the password: "Gallons@autorepairmanuals.ws, admin@autorepairmanuals.ws"

Release Note 05.2024: " CLICK HERE "

REFERENCE MODELS: "CLICK HERE"

Release Notes - 4/22/2024 - Update 2024.2
EDT NOTES:
EDT Version: 1.126.24065.1048
Enhancements:
Minor improvements to diagnostic functionality.
Vehicles Affected:
Massey Ferguson: Square Balers: 2224, 2233, 2234, 2234XD, 2244
Fendt: Square Balers: 990, 1270, 1290, 1290XD, 12130
Vehicle Version:
1.23
Software:
EXT Lite v1.06.01
Fault handling - Invalid fault codes occurring when an output is activated after being
faulted has been fixed. Startup check of most outputs have been fixed and will now
show a fault code if outputs are not consuming any power at startup have been fixed.
Task controller translation - Error in task controller translation has been identified and
should now be displayed correctly. Old version used Current Flake Count as a unit
which is now changed into Flakes.
Accumulator support - Phiber accumulator support has been added, the user interface
will now show the status of the accumulator and when the accumulator ejects, all
bales will be ejected at the same time on BaleLink. Because of ACM limitations there
will still be a short time delay between drops, this requires a change in BaleLink which
will be made later.
NT03 v2.10.19 - NT03 standalone software to support new sound files to address PPR Item
P21696 – Operators cannot hear near full and full bale alarms.
Digistar Scale Module - Flash package detects bootloader version and will provide appropriate
steps to update if hardware requires.

 

[Master]

AGCO EDT 05.2024