Tigercat Feller Buncher L877 Operator Manual 78759AENG

[Hyundai]

Download this document, you need 750 Gallons

Tigercat Feller Buncher L877 Operator Manual 78759AENG
Size: 54.97 MB
Format: PDF
Language: English
Brand: Tigercat
Type of Machine: Feller Buncher
Type of Manual: Operator Manual
Model: Tigercat L877 Feller Buncher
Serial Number 87720001–87721000
Part Number: 78759AENG
Publication Date: 2025
Number of Pages: 360 Pages

Contents:
Introduction

Available Literature​

Warranty Certificates​

Program Information​

Introduction​

Machine Identification and Serial Numbers​

Machine Identification​

Engine Identification​

Serial Number Locations​

Engine Identification​

Serial Number Plate​

Regional Marking​

Machine Operator Protective Structures​

Modifications and Repairs​

This Operator Enclosure Meets the Following Standards:​

Regulatory Information​

Federal Communications Commission (FCC) Notifications to User​

Industry Canada (IC) Notifications to User​

Vibration and Noise Levels​

US Environmental Protection Agency (EPA) Warranty Certificate​

Coverage​

Component Coverage​

Emissions Warranty Does Not Cover:​

Non-Approved Field Product Changes​

Section 1–Safety

Safety Alert Symbol​

Signal Words​

General Safety Precautions​

Hazard Zone​

Personal Protective Equipment (PPE)​

Prepare for an Emergency​

Keep Guards and Protective Devices in Place​

Keep Clear of Moving Parts​

Prevent Exhaust Build-Up​

Climbing On and Off the Machine​

Hazardous Materials​

Fluid Injection Injury​

Fire Prevention​

Operating Safety Precautions​

Emergency Exit Locations​

Emergency Egress Tool​

Battery Disconnect Switch​

Safety Interlocks​

Preparing the Machine for Use​

Keep the Operator's Station Clean​

Use and Maintain the Seat Belt​

Precautions for Starting the Engine​

Precautions for Stopping the Engine​

Parking the Machine​

Operating the Machine Safely​

Operate Only for Intended Use​

Operating the Switchable ER Boom​

High Voltage Contact​

Avoiding Injury from Backover Accidents​

Visibility​

Minimizing Vibration During Use​

Machine Stability and Traction​

Attachment Safety Precautions​

Preparing the Attachment for Use​

Operating the Attachment​

Using High-Speed Disc Saws Safely​

Servicing Safety Precautions​

Preparing the Machine for Maintenance​

Releasing Hydraulic Pressure​

Safety Devices​

Engine Lockout/Tag Out​

Performing Maintenance​

Performing Maintenance With the Engine Running​

Servicing the ER Boom System​

Welding Safety​

Transporting Safety Precautions​

Storage Safety Precautions​

Labels​

Label Locations​

Safety Labels​

Notice Labels​

Information Labels​

Section 2–Controls and Operation

Pictogram Descriptions​

Joystick Controls​

Left Joystick​

Right Joystick​

Joystick Buttons and Triggers​

Track Drive Controls​

Foot Pedals​

Travel Speed Controls​

Cab Control Panels​

Control Panel (Lower-Right)​

Control Panel (Upper-Right)​

Control Panel (Left Armrest)​

Control Panel (Upper-Left)​

Pillar (Right-Front)​

Rear Wall, Cab​

Audio System​

Battery Disconnect Switch​

CB Radio (Optional)​

Fire Extinguishers​

Fire Extinguisher, Cab​

Fire Extinguisher Enclosure, Upper Structure​

Amerex Fire Suppression System (Optional)​

Overview​

Control Panel​

System Status​

Shutdown Delay​

Alarm Silence​

Push To Test​

Manual Actuators​

Operation​

Fogmaker Fire Suppression System (Optional)​

Overview​

Control Panel​

System Status​

Shutdown Delay​

Main Menu​

Manual Actuator​

Operation​

Engine Coolant Shut-off Valves​

Camera Systems​

Video Display​

Camera​

Operating the Emergency Exits​

Front Door​

Side Door​

Escape Hatch​

Operator's Seat​

Adjusting the Operator's Seat​

Seat Climate Control​

Adjusting the Armrests and Control Pods​

Seat Belt​

Computer Display (Home Screen)​

Engine Menu​

Adjustment Menu​

Information Menu​

Joystick Configuration​

Telematics Menu​

Expansion Menu​

Cab Heating and Ventilation​

Computer Menu Screens​

Main Menu​

Menu Navigation​

System Menu​

Measure Menu​

Adjust Menu​

Preferences Menu​

Operation Modes​

Warmup Mode​

Anti-Stall​

ER Operating Modes​

Rearview Camera​

Fan Service Mode​

Telematics Repair Mode​

Auto-Leveling​

Ground Slope Inclinometer (Optional)​

Current Output Channels​

Channel Types​

Plus and Minus Directions​

Channel Adjustment Screen​

Making Channel Adjustments​

Computer Messages​

Critical Messages​

Error Messages​

Alert Messages​

Information Messages​

IQANgo​

Summary of App Operations​

Connect To The Machine​

Disconnect From The Machine​

Log In​

Get Clone​

Get Settings​

Get Log​

Forward Data​

Receive Data​

Send To Machine​

System Menu​

Logs Menu​

Measure Menu​

Adjust Menu​

Remote Assistance Mode​

Storage Area​

Enclosure Storage Compartment​

Undercarriage Toolbox​

Battery Boosting​

Battery Booster Cable with Socket Plug​

Battery Booster Cable with Clamps​

Operating the Machine​

Pre-Start Checks​

Starting Engine​

Cold Weather Starting​

Tigercat Track Drive Gearbox Brake Test​

Check the Functionality of the Track Drive Gearbox Brakes​

Restarting an Engine That Has Run Out of Fuel​

Disabled Machine, Boom System Lowering​

Stopping Engine​

Hot Engine Shutdown Prevention Strategy​

Tier 4F Machines​

Tier 2/Non-Certified Machines​

Temperate Engine Shutdown​

Hot Engine Shutdown​

System Test and Warmup​

Undercarriage Orientation​

Traveling (Boom Raised)​

Operating Tips​

ER Boom Operation​

Track Operation and Wear Prevention​

Operating the Tracks Safely​

Protecting Steel Tracks​

Transporting Instructions​

Section 3–Lubrication and Maintenance

New Machine Maintenance​

Initial Pre-Delivery Inspection​

Amerex Pre-Delivery Inspection and Certification​

Fogmaker Pre-Delivery Inspection and Certification (If Equipped)​

First 125 Hour Inspection Report​

Track Sag​

Leveler Cylinder Tapered Lock Pins Re-Torquing Schedule​

Tightening Points​

Tigercat Fluid Analysis Program​

Tigercat Fluid Analysis Kits​

Sampling Schedule​

Fluid Sample Collection Procedures​

General Maintenance​

Check Emergency Exits Monthly​

Fire Prevention​

Amerex Fire Suppression System Maintenance (Optional)​

Fire Suppression System Maintenance, Fogmaker (Optional)​

Scheduled Maintenance​

Frequently​

Every 8 Hours​

Every 125 Hours​

Every 250 Hours​

Every 500 Hours​

Every 1000 Hours​

Every 1500 Hours​

Every 2000 Hours​

Every 2 Years or 3000 Hours​

Every 3 Years​

Every 5000 Hours​

Seasonal​

Approved Hydraulic Oils​

Service and Lubrication Schedule​

Leveling Component Lubrication Points​

Leveler Cylinder Locks​

Installing the Cylinder Locks​

Removing the Cylinder Locks​

Service and Maintenance Doors and Covers​

Door Latch Operation​

Cab Air Filter Cover​

Fire Extinguisher Enclosure, Upper Structure​

Breather Cover​

Left Side Door​

Ladder​

Battery Compartment​

Hydraulic Oil Tank Cover​

Main Control Valve Cover​

Rear Door​

Air Intake Cleanout Cover​

Warm Air Intake Cover​

Track Drive Motor Covers​

Power Roof​

Engine Lower Covers​

Hydraulic Pumps Lower Cover​

Main Control Valve Lower Cover​

Rear Service Compartment Lower Cover​

Hydraulic Oil Tank and Fuel Tank Cover​

DEF Tank Lower Cover​

Track Drive Gearbox​

Filling the Gearbox​

Oil Draining and Replacement​

Track Drive Gearbox Grease Seal​

Swing Drive Lubrication​

Lubrication of Swing Drive Gearbox Lower Bearings​

Lubrication of Swing Bearing and Swing Pinion​

Lubrication of Swing Drive Gearbox Upper Gearing​

Rotary Manifold Seal Lubrication​

Leveling Machines​

Leveling Component Lubrication​

Upper Pivot Bearings​

Front Pin Cap​

Thrust Washer​

Leveling Cylinders​

Intermediate Pivot Bearing​

ER Boom System Maintenance​

Hydraulic System​

Refilling the Hydraulic System​

Hydraulic Oil Tank​

Hydraulic Oil Level​

Hydraulic Oil Temperature Sender​

Hydraulic Oil Tank Breather​

Hydraulic Oil Heater (Optional)​

Hydraulic Oil Tank Pressurization Instructions​

Vacuum System​

Draining the Hydraulic Oil Tank​

Hydraulic Oil Tank Cleanout Cover​

Refilling the Hydraulic Oil Tank​

Hydraulic Oil Return Filters​

Filter Restriction Pressure Sensors​

Filter Change Procedure–Return Filters​

Hydraulic Oil Strainer​

Pilot Filter​

Case Drain Return Filter–Saw​

Filter Change Procedure​

Engine Coolant Heater Unit (Optional)​

Engine Coolant Heater Preventative Maintenance (Webasto)​

Daily Maintenance​

Monthly Maintenance​

Biannual Maintenance​

Annual Maintenance​

Low Voltage Disconnect Adjustment (Webasto)​

Lockout Reset Procedure (Webasto)​

Air Conditioning System​

Overview​

Air Conditioning Components​

Inspection of the A/C System​

Inspection/Replacement of Serpentine Belt​

Cab Electrical Panel​

Engine Diagnostic Connector​

Fuses and Relays​

Main Electrical Box Fuses and Relays​

Battery Care​

Engine Filters–Remove and Replace​

Engine Oil Filter​

Fuel Filter​

Remote Crankcase Ventilation (CCV) Filter​

Fuel Filter/Water Separator​

Fuel Specifications​

Tier 4f Engines​

Tier 2/Non-Certified Engines​

Biodiesel​

Fuel Additives​

Refuelling Procedure​

Fuel System​

Fuel Tank​

Fuel Tank Capacity​

Fuel Tank Strainer​

Fuel Heater​

Fuel Tank Sump​

Fuel Tank Strainer, Changing/Cleaning​

Bottom Refuelling System​

Air Intake System​

Air Precleaner​

Filter Restriction Indicator​

Air Cleaner​

Warm Air Intake Cover​

Intake Tubing and Joints​

Engine Coolant​

Engine Coolant Specifications​

Check Engine Coolant Level​

Draining Engine Coolant​

Adding Engine Coolant​

Aftertreatment System​

Diesel Exhaust Fluid (DEF) Handling and Specifications​

DEF Tank​

Filling the DEF Tank​

Cleaning the DEF Fill Strainer​

Draining and Cleaning the DEF Tank​

In-Line DEF Strainer​

Checking or Replacing the In-Line DEF Strainer​

DEF Supply Module​

Care of the Machine​

Emergency Exit Maintenance​

Pressure Washing​

Cleaning Cooler Package​

Cleaning Cab Interior Plastic​

Cleaning Cameras and Video Displays​

Care of Polycarbonate Windows​

Tracks​

Torquing Undercarriage Bolts​

Measuring Track Sag​

Track Sag Adjustment​

Leveler Cylinder Tapered Lock Pins Re-Torquing​

Tapered Lock Pin Gap​

Storing the Machine​

Recommended Storage Conditions​

Preparing the Machine for Storage​

Inspection and Maintenance During Storage​

Preparing the Machine for Use After Long-Term Storage​

End of Service Life​

Preparing the Machine for Disposal​

Disposing of Fluids and Components​

Torque Chart​

Torque Specifications​

General Torque Specifications​

Parker Assembly Torque​

Eaton Aeroquip Assembly Torque​

Pressure and Speed Settings​

Hydraulic Adjustments Table​

Index