Terex Software Programming AC - Cranes Service Training

[Hyundai]

Download this document, you need 750 Gallons

Terex Software Programming AC - Cranes Service Training
Size: 5.64 MB
Format: PDF
Language: English
Brand: Terex
Type of Machine: Crane
Type of Manual: Service Training
Model: Terex Software Programming AC - Cranes
Number of Pages: 169 Pages

Contents:
1 Crane update complete (e.g. AC 200-1)

1.1 Reading out and documenting the current software version​

1.2 Dlog project backup​

1.3 Saving the watch lists​

1.4 Checking the firmware​

1.5 Firmware update CPU, I/O and CGM​

1.6 Project update: Digsy compact CPU​

1.7 Project update, CGM​

1.8 Software update, Dlog​

1.9 Checking and adapting the crane-specific data​

1.10 Loading new projects as a zipped file on to the Dlog​

1.11 Moki project update​

1.12 Backing up the software and parameters of the Mobil Elektronik system​

1.13 Loading the Mobil Elektronik parameters​

1.14 Mobil Elektronik software flash​

1.15 Softwareflash Mobil Electronic with *.eea file​

1.16 Re-loading the backup files​

1.17 Programming of the AC55_City steering system​

1.18 Programming of the AC100/4 steering system​

2 Replacing the Digsy compact CPU

2.1 Unpacking the project​

2.2 Loading the project​

2.3 Checking the firmware​

2.4 Firmware update (if necessary)​

2.5 Loading the crane-specific data​

3 Replacing the Dlog

3.1 Loading the operating system and project​

3.2 Checking and adapting the crane-specific data​

4 Calibrating the pressure transmitters
5 Calibrating the sensors
6 Changing the joystick - ID
7 Changing a CAN - ID

7.1 Changing the ID, for example pressure transducer​

7.2 Reset addressing​

8 Moki

8.1 Erasing the transmission, ABS and retarder errors​

8.2 Setting the operating hour counter​

9 Programming of AC 50-1, AC 80-2 and AC 100/4

9.1 PDM Download (Saving) of Projects​

9.2 PDM Upload (Updating) of Projects​

9.3 IFM Download of Firmware and Application​

9.4 Sensor Calibration​

9.5 Load Correction​

9.6 AC 50-1 / AC 80-2 PWM Menu​

9.7 AC100/4 position speed of the telescope​

10 Programming the central computer and the Moki AC100/4

10.1 Connecting the laptop to the crane​

10.2 Uploading the software onto the central computer​

10.3 Uploading parameter set onto ZR32​

10.4 Uploading the EEPROM parameter sets​

10.5 Parameter editor​

11 Programming of the MOBA emergency control
12 Software-Update MTC
13 Table of Illustrations