Liebherr Crane LTM 1120-4.1 Operation Manual 28400-05-02

[Hyundai]

Download this document, you need 500 Gallons

Liebherr Crane LTM 1120-4.1 Operation Manual 28400-05-02
Size: 59.74 MB
Format: PDF
Language: English
Brand: Liebherr
Type of Machine: Crane
Type of Manual: Operation Manual
Model: Liebherr LTM 1120-4.1 Crane
BAL Number: 28400-05-02
Number of Pages: 2013 Pages

Contents:
1 Description of crane

1.01 Terminology​

1.02 Product description​

1.03 Technical data​

1.03.10 Outrigger pads​

2 Safety

2.01 Traffic regulations​

2.01.10 General traffic regulations​

2.01.20 National traffic regulations​

2.02 Break-in instructions​

2.03 Job planning​

2.04 Technical safety instructions​

2.04.10 Ladders​

2.05 Signs on the crane​

2.05.10 Labeling of the load carriers​

2.06 Fall protection equipment on the crane​

2.07 Accesses to the crane​

2.08 Working in low temperatures​

2.25 Crane on floating body​

3 Operation of crane chassis

3.01 Operating and monitoring instruments on the crane chassis​

3.02 Before starting to travel​

3.03 Axle suspension system​

3.03.50 Axle suspension system hydro reservoir​

3.04 Travel operation​

3.05 Crane at the job site​

3.07 Towing the crane​

3.50 Trailer coupling​

3.60 Underride protection​

3.80 Crane and crane component transport​

4 Operation of crane superstructure

4.01 Operating and monitoring instruments on the crane superstructure​

4.01.10 Touch display menu operation​

4.02 LICCON computer system​

4.03 Start up and shut down of crane​

4.04 Safety equipment​

4.05 Crane operation​

4.06 Rope reeving​

4.07 Counterweight​

4.08 Working with a load​

4.10 Driving from the crane cab​

4.11 Crane operation "Freestanding"​

4.12 Two hook operation (crane with telescopic boom)​

4.20 Procedure for shut-off of crane movement​

5 Equipment

5.01 Technical safety instructions for assembly and disassembly​

5.02 Folding jib - TK​

5.02.10 Hose drum​

5.09 Winch 2​

5.10 Boom nose​

5.12 Special folding jib​

5.14 Telescopic boom disassembly / assembly, luffing cylinder on the crane superstructure​

5.17 Sliding beam disassembly / assembly​

5.19 Hook blocks​

5.25 Telescopic boom extension​

5.31 Bluetooth Terminal (BTT)​

5.70 Camera​

5.75 Wind speed sensor / airplane warning light​

5.80 Floodlight​

6 Auxiliary equipment

6.01 Driver's cab heater / engine preheating / air conditioning system​

6.02 Crane operator's cab heater / engine preheating / air conditioning system​

6.07 Emergency control of support​

6.25 Emergency control​

6.26 Variable support​

6.26.05 Assembly / disassembly on variable support chart overview​

6.26.10 Assembly / disassembly on variable support charts​

7 Maintenance and service

7.01 Maintenance and service - General​

7.01.10 Service system​

7.02 Maintenance and inspection schedule​

7.04 Crane operator maintenance tasks​

7.05 Maintenance personnel maintenance activities​

7.06 Fill quantities, lubrication chart​

7.07 Operating fluids and lubricants​

8 Inspections of cranes

8.01 Periodic crane inspections​

8.01.10 Inspection plan​

8.03 Inspecting of winches​

8.04 Inspection of crane wire ropes​

8.05 Inspection of load hooks​

8.06 Inspection of hydraulic hose lines​

8.07 Inspection of pneumatic brake system for disk brakes (system pressure: 10 bar)​

8.17 Inspection of ladders​

8.20 Country-specific content​

8.80 Weighing procedure for mobile cranes​

8.90 Inspection chart for cranes​

90 Appendix

90.01 Preface to the appendix​

90.05 Update confirmation​