Krone Round Baler Vario Pack 1500 Vario Pack 1800 Operating Manual 436-7GB

[Hyundai]

Download this document, you need 750 Gallons

Krone Round Baler Vario Pack 1500 Vario Pack 1800 Operating Manual 436-7GB
Size: 7.06 MB
Format: PDF
Language: English
Brand: Krone
Type of Machine: Round Baler
Type of Manual: Operating Manual, Electrical Schematic
Model: Krone Round Baler
Krone Vario Pack 1500
Krone Vario Pack 1500 MultiCut
Krone Vario Pack 1800
Krone Vario Pack 1800 MultiCut
Machine Number: From 540 680
Part Number: 436-7GB
Publication Date: 2004
Number of Pages: 138 Pages

Contents:
1 General Information

1.1 Intended Operation​

1.2 Technical Data​

2 Safety

2.1 Identifying Safety Instructions in the Operating Manual​

2.2 Safety Instructions and Accident Prevent Regulations​

2.3 Introduction​

3 Before and After Use

3.1 Commissioning​

3.2 Hitching​

3.3 Road Driving​

3.4 Unhitching​

4 Operation

4.1 Adjustments Before Starting Work​

4.2 Forward Speed and PTO Speed​

4.3 Filling the Bale Chamber​

4.4 Wrapping and Depositing Bales​

4.5 After Baling​

4.6 Splashguard​

4.7 Rotor reversing device​

5 Basic Settings and Operation

5.1 Pick-Up​

5.2 Baffle Plate​

5.3 Cutting System (MultiCut)​

5.4 Select baling pressure​

5.5 Adjusting baling diameter​

5.6 Attaching and Detaching the Bale Ejector​

5.7 Floor Conveyor Chain​

5.8 Twine and Net Wrapping / Twine Wrapping​

5.9 Net Wrapping​

5.10 Bale Counter​

5.11 Central Chain Lubrication Device​

6 Mechanical bale size indicator

6.1 Adjustments​

7 Control unit Basis (Electric twine starter)

7.1 General Information​

7.2 Preparing for Use​

7.3 Operation​

8 Control unit Medium (Electro-Hydraulic)

8.1 General Information​

8.2 Preparing for Use​

8.3 Operation​

8.4 Sensor Test​

8.5 0-Blade position​

9 Control unit Comfort

9.1 General Information​

9.2 Mounting​

9.3 Control Panel​

9.4 Ready Status​

9.5 Basic Setting​

9.6 Operation​

9.7 Bale Counter​

9.8 STOP Key​

9.9 Error Messages​

9.10 Alarm Messages​

9.11 Sensor Test​

8.12 0-setting of the baling pressure indicators​

9.13 Language Setting for the Comfort Controls​

10 Maintenance

10.1 Adjustments​

10.2 Adjusting the Sensors​

10.3 Maintenance Tasks​

10.4 Drive Chains​

10.5 Hydraulic System​

10.6 Drawbar Ring Hitch​

10.7 Cleaning Tensioning Arm​

10.8 Shortening the floor conveyor chains​

10.9 Sharpen Cutting System Blades​

10.10 Maintaining the Compressed Air Brake System (Special Equipment)​

10.11 Lubrication​

11 Winter Storage

11.1 General Information​

12 Return to Service

12.1 General Information​

12.2 Vent Overload Coupling on the PTO Shaft​

13 Faults - Causes and Remedy

13.1 General Faults, Causes and Remedy​

13.2 Faults, Causes and Remedy in the Central Chain Lubrication Device​

13.3 Error Messages for the Control unit Comfort​

A1 Commissioning
A1.1 Preparing for Commissioning
A1.2 Assembling the Bale Ejector
A1.3 Adjusting Drawbar Height
A1.4 Attaching the PTO Shaft
A1.5 Attaching the Hose Bracket
A1.6 Lighting System
A2 Electrical Circuit Diagram