Krone Rotary Tedder Vendro 1120 Assembly Instructions 150001823-00-EN

[Martin Welker]

Download this document, you need 1050 Gallons

Krone Rotary Tedder Vendro 1120 Assembly Instructions 150001823-00-EN
Size: 61.8 MB
Format: PDF
Language: English
Brand: Krone
Type of Machine: Rotary Tedder
Type Of Manual: Assembly Instructions
Model: Krone Vendro 1120 Rotary Tedder
Serial Number: 1087929
Parts Number: 150001823-00-EN
Publication Date: 2022
Number Of Page: 138 Pages

Contents:
About This Document
Validity
Re-Ordering
Applicable Documents
Target Group Of This Document
How To Use This Document
Safety
Personnel Qualification Of The Technicians
Basic Safety Notices
Safety Routines
Scope Of Delivery
Assembly
Tightening Torques
Suspended Loads
Contaminated Components
Installation Position Of Roll Pins
General Information On Assembly
Preparing The Machine
Dismounting The Guard
Mounting The Support Frame
Mounting The Coupling Lever On The Support Frame
Mounting The Hydraulic Cylinder
Pre-Assembling The Support Jack
Mounting The Three-Point Hitch
Mounting The Damper Braces
Mounting The Inside Wheels
Lifting And Securely Supporting The
Dismounting The Control Pipe
Mounting The Rear Support Jack
Mounting The Three-Point Hitch
Mounting The Damper Braces
Mounting The Inside Wheels
Lifting And Securely Supporting The Machine
Dismounting The Control Pipe
Mounting The Rear Support Jack
Mounting The Control Pipe
Mounting The Tine Arms
Mounting The Wheels
Folding Down The Machine
Dismounting The Kinematic System
Moving The Bar To The Correct Position
Mounting The Kinematic System
Mounting The Adjusting Lever
Mounting The Border Spreading System Indicator
Adjusting The Border Spreading System Indicator
Mounting The Tine Arms
Mounting The Wheels
Moving The Machine To Working Position
Mounting The Cover
Connecting The Hydraulics
Routing The Hydraulic Hose To The Front
Mounting The Guard
Mounting The Guard Holder
Mounting The Guard
Mounting Guard Tube
Setting The Guard
Setting The Protective Pipe
Mounting The Support For The Coupling Rod
Mounting The Hoop Guard
Mounting The Document Storage Tube
Mounting Warning Panels
Adjusting The Wheels (Fine Adjustment Of The Middle Wheels)
Checking The Arrangement Of The Tine Arms And Wheels
Setting
Adjusting The Kinematics
Adjusting The Hoop Guard
Initial Operation