Krone Rotary Rakes Swadro TC 1250 Assembly Instructions 150001743-00-EN

[Martin Welker]

Download this document, you need 1050 Gallons

Krone Rotary Rakes Swadro TC 1250 Assembly Instructions 150001743-00-EN
Size: 63.6 MB
Format: PDF
Language: English
Brand: Krone
Type of Machine: Rotary Rakes
Type Of Manual: Assembly Instructions
Model: Krone Swadro TC 1250 Rotary Rakes
Serial Number: 1090806
Parts Number: 150001743-00-EN
Publication Date: 2022
Number Of Page: 140 Pages

Contents:
Information On This Document
Validity
Significance Of The
Applicable Documents
Target Group Of This Document
How To Use This Document
Directories And References
Information On Direction
Figures
Means Of Representation
Conversion Table
Safety
Personnel Qualification Of The Technicians
Basic Safety Instructions
Safety Routines
Shutting Down And Safeguarding The
Securing Raised Machine And Machine Parts Against Lowering
Carrying Out Oil Level Check And Oil And Filter Element Changes Safely
Scope Of Delivery
Assembly
Tightening Torques
Suspended Loads
Contaminated Components
Installation Position Of Roll Pins
General Information On Assembly
Preparing The Machine
Dismounting Main Frame (Optional)
Mounting Brake Axle Stub
Mounting Wheels
Mounting Brake
Mounting The Main Gearbox
Mounting Cross Beams
Mounting Hydraulics For Sequential Control
Mounting The Front Outrigger Arms
Laying Hydraulic Hoses
Mounting Warning Panels
Mounting Tine Guards
Mounting The Rear Lighting Carriers
Mounting Gearbox Support
Mounting The Running Gear
Mounting The Rotor Gearboxes
Moving The Machine To Working Position
Mounting The Rotor On The Outrigger Arm
Mounting Universal Shafts
Mounting The Tine Arms
Arrangement Of The Tine Arms
Mounting Tine Arms
Tightening And Testing The Tine Arms
Mounting The Protective Frame
Mounting The Slide Tube
Mounting Mechanical Rotor Height Adjustment
Mounting Mechanical Rotor Height Adjustment At Rear
Mounting Mechanical Rotor Height Adjustment At Front
Mounting Guard Tubes
Checking Tine Position To Protective Frame
Installing The Sealing Plug
Adjusting The Tyre Pressures
Setting The Rotor Height
Adjusting The Intermediate Link
Checking The Spacing Of Tines In Headland Position
Move The Machine Into Transport Position
Adjusting The Tension Strut
Mounting The Special Labelling (Optional)
Mounting Multi-Port Distributor
Initial Operation
Index