John Deere Cam Lobe Motors Components Technical Manual CTM19

[Martin Welker]

Download this document, you need 300 Gallons

John Deere Cam Lobe Motors Components Technical Manual CTM19
Size: 7.32 MB
Format: PDF
Language: English
Brand: John Deere
Type of Machine: Cam Lobe Motors
Type of Manual: Components Technical Manual
Model: John Deere Cam Lobe Motors
Part Number: CTM19
Number of Pages: 78 Pages

Contents:
Group 00—Introduction and Safety
Introduction
Motor Identification
Safety and You
Prepare For Emergencies
Avoid High-Pressure Fluids
Wear Protective Clothing
Use Proper Lifting Equipment
Work in Clean Area
Use Proper Tools
Dispose of Fluids Properly
Group 01—General
Motor Serial Number Plate
Specifications
Metric Series Torque Chart
Inch Series Torque Chart
Group 05—Steerable Components
Essential Tools
Service Equipment and Tools
Other Material
Specifications
Steering Yoke
Remove and Install
Pivot Pins, Bushings, and Seals Disassemble and Assemble
Group 10—Brake Components
Service Equipment and Tools
Specifications
Brake Components Disassemble, Inspect, and Assemble
Group 15—Axle End Play
Service Equipment and Tools
Specifications Page
Adjust Axle End Play Steerable and Fixed-Mount Motors (Codes 1 and 2)
Fixed-Mount With Brake Motors (Codes 1 and 2)
Steerable and Fixed-Mount Motors (Code 3)
Group 20—Basic Motor Repair
Essential Tools
Service Equipment and Tools
Other Material
Specifications
Cross-Section View-50 Series
Steerable (Codes 1 and 2)
Fixed-Mount (Codes 1 and 2)
Fixed-Mount W/Brake (Codes 1 and 2)
Cross-Section View-60 Series
Steerable (Code 3)
Fixed-Mount (Code 3)
Prepare Motor for Disassembly
Shaft Extension-Fixed Mount W/Brake
Remove, Inspect, and Install
Bearing Quill-Steerable and Fixed-Mount
Disassemble and Inspect
Assemble
Bearing Quill-Fixed-Mount With Brake
Disassemble and Inspect
Assemble
Quill Clearance
Measure and Adjust-Steerable and
Fixed-Mount
Measure and Adjust-Fixed-Mount with
Brake
Inner Cover
Disassemble and Assemble
Manifold
Disassemble, Inspect, and Assemble
Check Valves and Destroke Pump
Exploded View
Disassemble, Inspect, and Assemble
Cam
Remove, Inspect, and Install
Piston Carrier
Disassemble, Inspect, and Assemble
Thrust Bearing and Race
Inspect
Outer Cover
Disassemble, Inspect, and Assemble
Axle Bearing and Seals
Remove and Install
Group 105—Operation and Tests
Cam Lobe Motor Operation
Steerable Motor
Revision Codes 1 and 2 (50 Series)
Revision Code 3 (60 Series)
Fixed Mount Motor
Brake Function
Destroke Pump Operation
Test
Index