JLG Telehandler R1370 Operation Safety Manual 3122345200

[Hyundai]

Download this document, you need 750 Gallons

JLG Telehandler R1370 Operation Safety Manual 3122345200
Size: 23.15 MB
Format: PDF
Language: English
Brand: JLG
Type of Machine: Telehandler
Type of Manual: Operation Safety Manual
Model: JLG R1370 Telehandler
Part Number: 3122345200
Publication Date: 2025
Number of Pages: 338 Pages

Contents:
R1370 Cover page
R1370 Revision Log

Other Publications Available​

Vehicle Identification​

Serial Number Plate​

Read This First

Operator Qualifications​

Modifications​

General Introduction

Introduction​

Recipients​

Training​

Machine Orientation​

General Safety Practices

Hazard Classification System​

1.1.1 Safety Alert System and Safety Signal Words​

General Precautions​

Operation Safety​

1.3.1 Electrical Hazards​

1.3.2 Tip Over Hazard​

1.3.3 Travel Hazard​

1.3.4 Load Falling Hazard​

1.3.5 Lifting Personnel​

1.3.6 Driving Hazards on Slopes​

1.3.7 Pinch Points and Crush Hazards​

1.3.8 Fall Hazard​

1.3.9 Chemical Hazards​

1.3.10 Windy Conditions​

Accessing Rotated Cab​

Traveling with a Load​

1.5.1 General Warnings for Traveling with a Load​

1.5.2 Handling Loads with Rotary Machines​

1.5.3 Use of Cables, Ropes, and Slings​

Personal Protective Equipment (PPE)​

1.6.1 Protective Clothing​

1.6.2 Noise Protection​

1.6.3 Protection Against Objects falling from Height​

1.6.4 Protection from Flying Fragments​

Preparing for Accidents​

1.7.1 Emergency Call​

ClearSky Smart Fleet - Locked Out State​

Radio Frequency (RF) Information​

1.9.1 Federal Communications Commission (FCC)​

1.9.2 Innovation, Science and Economic Development (ISED)​

1.9.3 European Union Conformity (CE)​

Pre-Operation & Inspection

Preparation, Inspection, and Maintenance​

Pre-Operation Check and Inspection​

Safety Decals​

2.3.1 Safety Decal Descriptions​

Warm-Up and Operational Checks​

2.4.1 Warm-Up Check​

2.4.2 Operational Check​

Cab and Features

Operator Cab​

3.1.1 Cab Components Description​

3.1.2 Door Opening — External Handle​

3.1.3 Door Opening — Interior Handle​

3.1.4 Climbing In and Out of the Cab​

Cab Features​

3.2.1 Cab Door Window​

3.2.2 Rear Window​

3.2.3 Window Wipers and Washers​

3.2.4 Heated Mirrors (If Equipped)​

3.2.5 Sunshade​

3.2.6 Cab Ventilation​

3.2.7 Air Conditioning (If Equipped)​

3.2.8 12 Volt Socket​

3.2.9 Storage Compartment​

3.2.10 Cup Holder​

Operator Seat​

3.3.1 Operator Presence Seat Sensor​

3.3.2 Seat Adjustment​

3.3.3 Seat Belts​

Lights​

3.4.1 Cab Lighting​

3.4.2 Low Beam Lights and Side Lights​

3.4.3 High Beam Lights​

3.4.4 Cab Front Light (If Equipped)​

3.4.5 Cab Rear Light (If Equipped)​

3.4.6 Boom Head Work Light (If Equipped)​

3.4.7 Rotating Beacon Light​

3.4.8 Emergency Lights​

Cameras​

3.5.1 Reverse Camera​

3.5.2 Wireless Cameras​

3.5.3 Camera Display Menu​

3.5.4 Adding an Extra Camera​

Controls & Indicators

Controls​

4.1.1 Instrument Panel​

4.1.2 Display Screen​

4.1.3 Travel Indicators​

4.1.4 Clock​

4.1.5 Hourmeter​

4.1.6 DEF Level​

4.1.7 ATS Regeneration Process​

4.1.8 Steering Wheel​

4.1.9 Outrigger Levers​

4.1.10 Outriggers Movements​

4.1.11 Outrigger Working Modes​

4.1.12 Joystick​

4.1.13 Automatic Flatness of Telehandler on Outriggers​

Controller​

4.2.1 Electric Hand Throttle​

4.2.2 Manual Gear Shift​

Ignition Switch​

Joystick Controls​

4.4.1 Double Joystick with Capacitive Captive Personnel Presence Sensor​

Anti-Tipping Device​

4.5.1 Anti-Tipping Device Safety Precautions​

4.5.2 Anti-Tipping Device Description​

4.5.3 Longitudinal Movement Indicator and Anti-Tipping Icon​

ByPass Key​

Attachment Selection Key​

4.7.1 Attachment Automatic Recognition System​

Multifunction Control Lever​

4.8.1 Direction Indicators​

4.8.2 Horn​

4.8.3 Front Windshield Wiper​

4.8.4 Window Washer​

Parking Brake and Pedals​

4.9.1 Parking Brake​

4.9.2 Service Brake Pedal​

4.9.3 Inching Pedal​

4.9.4 Accelerator Pedal​

Machine Leveling Controls​

4.10.1 Transverse Leveling Device​

4.10.2 Bubble Level​

Continuous Oil Function​

Automatic Swing Axle Lock​

Automatic Turret Rotation Lock​

Steer Modes​

4.14.1 Steering Mode Icons​

4.14.2 Manual Wheel Alignment​

Multifunction Display​

4.15.1 Initial Check​

4.15.2 Home Screen​

4.15.3 Boom Chains Error Icon​

4.15.4 Axles Swing Lock Icon​

4.15.5 Turret Rotation Icon​

4.15.6 Outriggers Status Icon​

4.15.7 Levelness Icon​

4.15.8 Digital Level​

4.15.9 Bookmarks​

4.15.10 Menu​

4.15.11 Active Errors​

4.15.12 Clock and Clock Settings​

4.15.13 Service Icon​

4.15.14 Limits​

4.15.15 Resolution​

4.15.16 Load Capacity Charts​

4.15.17 Rear Camera​

4.15.18 Documentation​

4.15.19 Attachment Automatic Recognition System (ARS)​

4.15.20 Boom Suspension (If Equipped)​

Operation

Engine​

5.1.1 Starting the Engine in Normal Conditions​

5.1.2 After Engine Starting Procedures​

5.1.3 Starting Engine in Low Temperatures​

5.1.4 Shut-Down Procedure​

Remote Control​

5.2.1 Description​

5.2.2 Remote Control Display​

5.2.3 Remote Connection Cable​

5.2.4 Operation​

Operation Check with Anti-Tipping Device Load​

Loading and Securing for Transport​

5.4.1 Lifting the Machine​

5.4.2 Transporting Machine on a Trailer​

Attachments

Approved Attachments​

6.1.1 Attachment Holding Plate Mounted Attachments​

Unapproved Attachments​

Equivalent Load​

6.3.1 Load Centers Beyond 24 Inches​

Use of the Capacity Chart​

6.4.1 Load Charts​

6.4.2 Reading the Capacity Charts​

6.4.3 Use of the Capacity Charts​

6.4.4 Legend for Capacity Load Charts​

JLG Supplied Attachments​

6.5.1 Attachment Pre-Use Checks​

6.5.2 Attachment List​

Attachment Installation​

6.6.1 Installation Procedure​

6.6.2 Hydraulic Sockets and Electrical Contact on Boom Head*​

6.6.3 Hydraulic Connections​

6.6.4 Electrical Contact on Boom Head (If Equipped)​

6.6.5 Electrical Connections​

6.6.6 Attachment Quick Coupling​

6.6.7 Attachment Removal​

Attachment Operation​

Forks​

6.8.1 Forks Inspection – Thickness​

6.8.2 Forks Inspection – Deformation and Integrity​

6.8.3 Forks Usage​

6.8.4 Forks Adjustment​

6.8.5 Moving Loads with Forks​

6.8.6 Transporting a Load with Forks​

6.8.7 Lifting a Load from the Ground​

6.8.8 Picking a Load from a High Position​

6.8.9 Positioning a Load in a High Position​

6.8.10 Picking Up a Round Load​

6.8.11 Use of non-JLG Branded Tools Attached to Forks​

Buckets​

6.9.1 Bucket Usage​

6.9.2 Fixed Tilt Indicator Use​

6.9.3 Safe Working Procedures​

Personnel Platform Attachments​

6.10.1 Platform Identification​

6.10.2 Lanyard Anchorage Points​

6.10.3 Platform Features​

6.10.4 Prior to Use​

6.10.5 Platform Movement Controls​

6.10.6 Platform Remote Control​

6.10.7 Platform Safety Decals​

Fixed Winch Attachment​

6.11.1 Fixed Winch Identification and Technical Data​

6.11.2 Preliminary Checks​

6.11.3 Winch Installation​

6.11.4 Winch Removal​

6.11.5 Operation​

6.11.6 Winch Maintenance Schedules​

6.11.7 Handling Loads​

6.11.8 Descent Limit Switch​

6.11.9 Lifting Limit Switch​

6.11.10 Winch Connections​

Trellis Winch Attachment​

6.12.1 Safety Precautions​

6.12.2 Installation​

6.12.3 Removal​

6.12.4 Operation​

6.12.5 Trellis Winch Maintenance Schedules​

6.12.6 Descent Limit Switch​

6.12.7 Lifting Limit Switch​

6.12.8 Load Control Valve​

6.12.9 Load Cell or Load Limiter (If Equipped)​

6.12.10 Connection Types​

Romaster Attachment​

6.13.1 Romastor Information and Safety​

6.13.2 Specifications​

6.13.3 Operating Instructions​

6.13.4 Cleaning​

6.13.5 Maintenance​

Emergency Procedures

Emergency Stop Button​

Towing a Disabled Product​

7.2.1 Moving Short Distances​

7.2.2 Moving Longer Distance​

7.2.3 Towing with Electrical Panel On​

7.2.4 Towing with Engine Failure​

Emergency Lowering of Boom​

Emergency Personnel Platform Recovery - Manual​

7.4.1 Manual Boom Retraction​

7.4.2 Platform Recovery from Cab​

Emergency Exit from Enclosed Cab​

Machine Shifted with Turret Rotated​

Lubrication & Maintenance

Introduction​

8.1.1 Clothing and Safety Gear​

Pre-Maintenance Operations​

General Maintenance Instructions​

8.3.1 Machine Components​

Boom Prop​

Batteries​

8.5.1 Recharging Batteries​

Maintenance Schedules​

8.6.1 Legend​

8.6.2 Safety Checks​

8.6.3 As Needed Checks​

8.6.4 Every 10 Hours​

8.6.5 Every 50 Hours​

8.6.6 Every 250 Hours​

8.6.7 Every 500 Hours​

8.6.8 Every 1000 Hours​

8.6.9 Every 2000 Hours​

8.6.10 Every 3000 Hours​

8.6.11 Every 3600 Hours​

8.6.12 Every 4000 Hours​

8.6.13 Every 10,000 Hours​

8.6.14 Every 2 Years​

Lubrication Schedules​

8.7.1 Greasing Fifth Wheel Teeth​

Operator Maintenance Instructions​

8.8.1 Engine Oil​

8.8.2 Air Intake System​

8.8.3 Tires​

8.8.4 Hydraulic Oil​

8.8.5 Brake System​

8.8.6 Engine Cooling System​

8.8.7 Windshield Washer System​

8.8.8 Cab Air Filters​

Diesel Exhaust Fluid (DEF)​

8.9.1 Proper Use​

8.9.2 Specifications​

8.9.3 Tank Filling​

8.9.4 After Run Indicator​

8.9.5 DEF — Urea Quality​

8.9.6 DEF — Urea Level​

8.9.7 DEF — Urea Circuit Errors​

Additional Checks & Information

General​

Troubleshooting​

9.2.1 Engine​

9.2.2 Hydraulic Transmission System​

9.2.3 Brakes​

9.2.4 Steering Wheel​

9.2.5 Telescopic Boom​

9.2.6 Turret Rotation​

9.2.7 Warning Codes​

Telehandler Storage​

9.3.1 Inactivity​

9.3.2 Extended Period of Inactivity​

9.3.3 Restarting the Telehandler​

Specifications

Product Specifications​

10.1.1 Dimensions​

10.1.2 Performance​

10.1.3 Engine​

10.1.4 Weights​

10.1.5 Electrical and Hydraulic System​

10.1.6 Transmission​

10.1.7 Axles​

10.1.8 Acoustic Pressure​

10.1.9 Acoustic Power​

10.1.10 Vibration​

10.1.11 Tires​

10.1.12 Fluids​

10.1.13 Environmental Conditions​

10.1.14 Electromagnetic Interference​

10.1.15 Radiations​

Attachments Specifications​

10.2.1 Counter Plate with Forks​

10.2.2 Bucket​

Definitions