JLG Boom Lift TOUCAN 8E to TOUCAN 26E Operation Safety Manual 31210522

[Hyundai]

Download this document, you need 500 Gallons

JLG Boom Lift TOUCAN 8E to TOUCAN 26E Operation Safety Manual 31210522
Size: 8.08 MB
Format: PDF
Language: English
Brand: JLG
Type of Machine: Boom Lift
Type of Manual: Operation Safety Manual
Model: JLG
TOUCAN 8E
TOUCAN 20E
TOUCAN 10E
TOUCAN 26E
Part Number: 31210522
Publication Date: 2025
Number of Pages: 144 Pages

Contents:
Section 1. SAFETY PRECAUTIONS

1.1 General​

1.2 Pre-Operation​

Operator Training and Knowledge​

Workplace Inspection​

Machine Inspection​

1.3 Operation​

General​

Trip and Fall Hazards​

Electrocution Hazards​

Tipping Hazards​

Crushing and Collision Hazards​

1.4 Towing, Lifting, and Hauling​

1.5 MAINTENANCE​

Maintenance Hazards​

Battery Hazards​

Section 2. User Responsibilities, MACHINE PREPARATION, and INSPECTION

2.1 Personnel Training​

Operator Training​

Training Supervision​

Operator Responsibility​

2.2 Preparation, Inspection, and Maintenance​

Table 2-1. Inspection and Maintenance Table​

2.3 Pre-Start Inspection​

2.4 DAILY WALK-AROUND INSPECTION​

2.5 Function Check​

Control Station​

SkyGuard Function Check​

Overload Sensor Check​

Gate sensors check (8E XL basket only)​

Section 3. MACHINE CONTROLS, indicators and operation

3.1 GENERAL​

3.2 DESCRIPTION​

3.3 OPERATING CHARACTERISTICS AND LIMITATIONS​

General​

Placards​

Capacities​

3.4 PLATFORM LOADING​

Stability​

3.5 machine control locations​

3.6 Controls and Indicators​

3.7 Ground Control Station​

Platform Manual Descent Valves - 8E/20E​

Mast Manual Descent Valve and Actuator - 8E/20E​

Jib Manual Descent Valve - 8E/20E​

Jib and Mast Manual Lift Up Valve (20E only)​

Manual Swinging Operating Devices - 8E/20E​

Platform Manual Descent Valves - 10E/26E​

Mast Manual Descent Valve and Actuator - 10E/26E​

Jib Manual Descent Valve - 10E/26E​

Jib and Mast Manual Lift Up Valve (26E only)​

Manual Swinging Operating Devices - 10E/26E​

3.8 Platform Control Station​

Grade and Side Slope​

3.9 Operation​

3.10 Steering and travelling (driving)​

Steering​

Travelling (driving)​

Drive Orientation System (DOS)​

3.11 RAISING AND LOWERING THE PLATFORM​

Raising and lowering the mast​

Raising and lowering the jib​

3.12 Swinging​

3.13 Alarms​

Overload Warning Light/Alarm​

Tilt Warning Light/Alarm​

Slack Chain Warning Light/Alarm​

Gate Opening Warning Light (8E XL Basket Only)​

3.14 Machine Safety System Override (MSSO) (If equipped)​

3.15 SKYGUARD OPERATION (Except 8E XL)​

Table 3-1. SkyGuard Function Table​

3.16 Shut down and park​

3.17 Battery charging​

Charger Interface​

3.18 Tie-down/lift lugs​

Tie Down​

Lifting​

Centre of gravity​

3.19 Towing​

Electric Brake Release​

3.20 Beacons​

3.20.1 ClearSky® LED Motion / Amber Beacon (CS550)​

3.20.2 Amber Beacon​

3.20.3 Blue or Red SkyGuard® Beacon​

3.21 CLEARSKY SMART FLEET™​

3.22 ACCESS CONTROL - CLEARSKY SMART FLEET™ (IF EQUIPPED)​

Section 4. EMERGENCY PROCEDURES

4.1 GENERAL INFORMATION​

4.2 EMERGENCY OPERATION​

Operator Unable to Control Machine​

Platform or Jib Caught Overhead​

4.3 EMERGENCY CONTROL​

4.4 Platform manual descent​

4.5 Incident Notification​

4.6 EMERGENCY TOWING​

4.7 mACHINE SAFETY SYSTEM OVERRIDE (MSSO) (If equipped)​

4.8 CLEARSKY SMART FLEET™ - LOCKED OUT STATE​

SECTION 5. General Specifications AND Maintenance

5.1 Introduction​

Other Publications Available Specific to this machine:​

5.2 Operating specifications​

Table 5-1. Operating Specifications And Dimensions - CE Models​

Table 5-2. Operating Specifications And Dimensions - ANSI Models​

Table 5-3. Dimensions​

Table 5-4. Tires Specifications​

Table 5-5. Drive Motors - Hydraulic Power Unit​

Table 5-6. Battery Specifications​

Table 5-7. Lubrication Specifications​

Table 5-8. Hydraulic Oil Specifications - Standard​

Table 5-9. Hydraulic Oil Specifications - Optional​

5.3 OPERATOR MAINTENANCE​

5.4 CHASSIS HOOD REMOVAL​

5.5 BATTERY MAINTENANCE​

Battery Maintenance and Safety Practices​

Battery Voltage​

Use of a Battery in a Cold Environment​

Battery Not Working Continuously or Inactive Battery​

Battery Troubleshooting​

Charger Troubleshooting​

5.6 OIL LEVEL/OIL FILTER - 8E/20E​

Hydraulic Oil Check​

5.7 OIL LEVEL/OIL FILTER - 10E/26E​

Hydraulic Oil Check​

5.8 Hydraulic Filter Replacement​

5.9 TIRES & WHEELS​

Tire Wear and Damage​

Wheel and Tire Replacement​

Wheel Installation​

5.10 DECAL INSTALLATION​

Table 5-11. Machine Decal Installation Chart - 8E/10E - CE/UKCA/AS/NZL​

Table 5-12. Machine Decal Installation Chart - 20E/26E -ANSI/ANSI Export/CSA​

5.11 LUBRICATION​

Swing Bearing Race​

Swing Bearing Teeth​

Lifting Chains​

5.12 OVERLOAD SYSTEM VERIFICATION​

5.13 TILT SENSOR VERIFICATION​

5.14 Slack Chain Sensors Check​

5.15 RADIO FREQUENCY (RF) INFORMATION​

5.15.1 Federal Communications Commission (FCC)​

5.15.2 Innovation, Science and Economic Development (ISED)​

5.15.3 European Union Conformity (CE)​

5.15.4 United Kingdom Conformity Assessed (UKCA)​

5.16 supplemental information​

5.17 DIAGNOSTIC TROUBLE CODES (DTC)​

Introduction​

5.18 EC DECLARATION OF CONFORMITY​

5.19 UKCA DECLARATION OF CONFORMITY​

Section 6. INSPECTION AND REPAIR LOG

Table 6-1. Inspection and Repair Log​