JCB SISU Power WinEEM4 Service Tool 2.7.2 Diagnostic Software

[James Rodrigues]

Download this document, you need 5600 Gallons

JCB SISU Power WinEEM4 Service Tool 2.7.2 Diagnostic Software
Size: 137MB (Winrar Files)
Database + Interface Languages: Only English
Type of software: Diagnostic software for JCB construction, agricultural machines, and engines
OS: Windows 7, Windows 8, Windows 10 32 & 64bit (Tested on Windows 10 pro-1607 64bit)
Version: 2.72
Instruction: Present
Supporter: Present
After download send to email "autorepairmanuals.ws@gmail.com, admin@autorepairmanuals.ws" to get the password

Release Notes:

############################################
# WinEEM4 Service Tool Release Notes #
############################################

##################################
# WinEEM4 2.7.2 Release Notes #
##################################

[NEW] Added new hardware configuration for Stage V SW version >= 6.0.0 and related version of active error description.


##################################
# WinEEM4 2.7.1 Release Notes #
##################################

[FIX] Fixed flashing data transmission failure handling when using RP1210 connection.


##################################
# WinEEM4 2.7 Release Notes #
##################################

[NEW] Added 'Marker' measurable that can be used to mark interesting parts when recording data. 'Marker' value can be adjusted using ALT+NUM. E.g. ALT+5 to set value to 5.
[NEW] Sensor values are highlighted on 'Aftertreatment process' view when mouse is pointed on sensor.
[NEW] Enabled DPF delta pressure sensor offset and exhaust back pressure sensor offset resetting in 'Service information' view.

[CHANGE] Removed 'Exhaust manifold pressure (P3)' from service tool 'Airsystem process' view.
[CHANGE] Improved test descriptions in engine test warning pages.

[FIX] Fixed issue related to checking "Oil pressure lamp off" actuator test availability causing oil pressure lamp to blink.


##################################
# WinEEM4 2.6.1 Release Notes #
##################################

[FIX] Fixed 'High' and 'Low' titles in 'NOx sensor test'.
[FIX] Fixed issues in oscilloscope channel search.
[FIX] Updated troubleshoot to version 2.0.12.

##################################
# WinEEM4 2.6 Release Notes #
##################################

[NEW] Added warning/confirmation dialog 'Do not use this function if you do not change the catalyst' to catalyst exchange function.
[NEW] Added 'Remaining low idle time' to Stage V 'Engine status' view.
[NEW] Added notification about unsupported diagnostic protocol if UDS is detected.
[NEW] Added remaining field testing time to 'Service information' view.
[NEW] Added 'Temperature sensor test'.
[NEW] Added possibility to save oscilloscope channel setups to tool settings. User can also export/import channel setups to/from external files.

[CHANGE] Changed tool to inform user in case ECU becomes locked during security access due to wrong hardware config.
[CHANGE] Changed 'Air mass flow' to show 'calculated' instead of sensor value in 'DPF regeneration' and 'SCR catalyst cleanup' views. Works better for configs without air mass sensor.
[CHANGE] Changed service tool not to show engine test warning page if user navigates to engine test that is already running.

[FIX] Fixed rendering issues for oscilloscope and recording viewer.
[FIX] Updated active error descriptions.
[FIX] Updated troubleshoot to version 2.0.11.
[FIX] Fixed 'EGR valve' to be visible in 'Air system actuator test' view for setup 'Single turbo + EGR'.


##################################
# WinEEM4 2.5.1 Release Notes #
##################################

[FIX] Fixed tool crash caused by configuration file containing incompatible settings.

##################################
# WinEEM4 2.5 Release Notes #
##################################

[NEW] Changed oscilloscope to always record all channels.
[NEW] Added auto-sweep mode to airsystem actuator tests.
[NEW] 'F5' key can now be used to refresh diagnostic views (logs, profiles, etc).
[NEW] Added digital outputs to 'Engine status' view.
[NEW] Added Stage V troubleshoot.
[NEW] Added 'NOx sensor test' view.
[NEW] Log files contain now encypted content for engineering purposes
[NEW] Added 'DPF delta pressure' and 'Exhaust back pressure' to 'DPF regeneration' view and log.
[NEW] Added new 'Engine shutdown' log reason, 'DPF protection in long idle'

[CHANGE] Changed 'DPF regeneration' to handle new regeneration state 'Engine heat-up' correctly.
[CHANGE] Moved all temperatures into 'Temperatures' group in 'DPF regeneration' and 'SCR catalyst cleanup' view.
[CHANGE] Added 'Coolant temperature' to chart visualizing temperatures in 'DPF regeneration' view.

[FIX] Fixed 'Service information' view not to allow setting too big value for engine hours.
[FIX] Fixed SCR catalyst temperature sensor indicators on 4I 'Aftertreatment process' view.
[FIX] Fixed tool to remember all connection settings but CAN baud rate.
[FIX] Changed recording to prevent display to turn off.
[FIX] Fixed oscilloscope not drawing all channels when ECU changed.
[FIX] Bug fixes and performance improvements.

##################################
# WinEEM4 2.4.2 Release Notes #
##################################

[FIX] Fixed random deadlock causing 'Active errors' view to freeze when 'Clear' button is clicked.

##################################
# WinEEM4 2.4.1 Release Notes #
##################################

[NEW] Added configuration 'Stage 5 - Dual Turbo B' to 'Airsystem Process' view.

[FIX] Fixed 'Airsystem actuator tests' view to update actuator actual value when user navigates away and back to the view.
[FIX] Bug fixes and performance improvements.

##################################
# WinEEM4 2.4 Release Notes #
##################################

[NEW] Added dr3 output support for recording export (trim recording).
[NEW] Added partial export of recording from oscilloscope (visible time range is exported).
[NEW] Added channel name based filtering option to oscilloscope active channels list.
[NEW] Added partial export option (user defined export start time and duration) to 'Export recording' dialog.
[NEW] Updated Stage V error codes.

[CHANGE] Removed value rounding from recording export(s).
[CHANGE] Changes to value rounding in oscilloscope and measurement views.
[CHANGE] Removed obsolete 'Sisu version' from 'Connection info' view, measurement export dialog and exported files.
[CHANGE] Set 'Automatic run' as default in 'Cylinder cut-out' and 'Engine run-up' tests.
[CHANGE] Disabled adding and removing channels to measurement while recording is in progress.

[FIX] Fixed timer interval issue causing e.g. cumulative deviation in recording time stamps.
[FIX] Fixed 'Ignition key state' measurement channel interpretation.
[FIX] Bug fixes and performance improvements.

##################################
# WinEEM4 2.3.2 Release Notes #
##################################

[NEW] Added 'Trigger wheel offset' to Stage 5 measurements.

[CHANGE] Changed 'DPF regeneration' view to show and log absolute boost pressure instead of relative value.
[CHANGE] Changed 'SCR catalyst cleanup' view show and log both relative and absolute boost pressure.

[FIX] Fixed issue causing tool not to remember connection settings when tool is restarted.
[FIX] Fixed issue causing 'DPF regeneration' and 'SCR catalyst cleanup' execution state not update correctly
if user navigates to some other view when operation has not finished.
[FIX] Bug fixes and performance improvements.

##################################
# WinEEM4 2.3.1 Release Notes #
##################################

[FIX] Fixed issues causing Stage 3B/4I 'Aftertreatment process' view not to show several heater statuses correctly.

##################################
# WinEEM4 2.3 Release Notes #
##################################

[NEW] Added 'Override engine state Normal' to Stage 5 'Engine status view'.
[NEW] Added 'DEF tank heater test'.
[NEW] Added 'Wiggle wire test' to engine tests.
[NEW] Added SCR catalyst cleanup log file writing.
[NEW] Added DPF regeneration log file writing.
[NEW] Added upstream and downstream NOx concentrations to 'DPF regeneration' view.
[NEW] Added 'Catalyst Exchange' feature.
[NEW] Added sulfur load to 'Service information' view 'SCR model' group.

[CHANGE] Restyled all engine test views.
[CHANGE] Redirected Stage 5 troubleshoot requests temporarily to Stage 4F troubleshoot.
[CHANGE] Enabled log saving after test aborted/timeout for following tests:
'DPF regeneration', 'SCR dosing quantity test', 'SCR system emptying test' & 'SCR catalyst cleanup'.
[CHANGE] Removed 'SCR temp. control mode' data from Stage 5 'Airsystem process' view and measurements.
[CHANGE] Removed several modeled values from 'Aftertreatment process' view.

[FIX] Fixed headers in 'DEF Dosing Rate Test' log file to show correct units for values.
[FIX] Fixed CAN message tracer issue possibly causing tool crash when message view was cleared.
[FIX] Fixed oscilloscope crash on opening recording (decimals in oscilloscope Y-Axis range setting).
[FIX] Fixed all diagnostics log views to provide 'Erase' button instead of 'Reset' button.
[FIX] Bug fixes and performance improvements.

##################################
# WinEEM4 2.2.1 Release Notes #
##################################

[NEW] Updated Stage V error codes and snapshot configurations.

[CHANGE] Changed Stage V 'Airsystem process' view to show EGR rate as percentual value.

[FIX] Fixed oscilloscope zooming (Ctrl + mouse left button).
[FIX] Several fixes to setting and fetching IQA codes.
[FIX] Fixed tool to send pending injector calibration reports to EEMService.com.
[FIX] Tier 4i 'Aftertreatment process' view shows SCR catalyst temperatures correctly.
[FIX] Bug fixes and performance improvements.

##################################
# WinEEM4 2.2 Release Notes #
##################################

[NEW] Added 'DPF regeneration' page.
[NEW] Added 'Save Logs' -button to navigation bar in dev- and s-tool.
[NEW] Added chart viewing EAT temperatures to 'SCR catalyst cleanup' view.
[NEW] Added engine test execution result (Completed, Cancelled, Failed etc.) to all engine test views.
[NEW] Updated Stage V fault code descriptions.
[NEW] Fixed 'Calculated air mass flow' to be shown always in 'Airsystem process' page, also for setups with no EGR.

[CHANGE] Changed ordering of diagnostic logs in 'All Logs' file
[CHANGE] Changed tool to support changed logs

[FIX] Bug fixes and performance improvements

##################################
# WinEEM4 2.1.2 Release Notes #
##################################

[FIX] Bug fixes and performance improvements



##################################
# WinEEM4 2.1 Release Notes #
##################################

[NEW] Stage V support (error codes, logs, profiles, process views and measurements)

[NEW] Connect dialog now can be opened by pressing status bar CAN bus part.

[CHANGE] Service tool can be started even if there is no valid CAN adapter connected.
[CHANGE] Dialog on successful set of specification mismatch override now has actual remaining override time instead of possible maximum.
[CHANGE] Unified pressure units to kilo Pascals.
[CHANGE] Renamed 'SCR Process' to 'Aftertreatment Process'.
[CHANGE] Tests and logs reorganized in categories in service tool.

[FIX] Bug fixes and performance improvements
[FIX] 'Engine status' view 'Oil pressure' specifier from Abs to Rel.



##################################
# WinEEM4 1.25 Release Notes #
##################################

[NEW] EEMService.com support.

[NEW] Added support for catalyst cleanup process timeout.

[NEW] Instruct operating system to not go to sleep while any operation or measurement recording
is active.

[CHANGE] Hide DEF tank heater test view from service tool since current implementation
in ECU may cause DEF injector damage.

[CHANGE] Engine status degradation lamps no longer have yellow state option.



##################################
# WinEEM4 1.24.3 Release Notes #
##################################

[NEW] Added EFS message fuel prefilter pressure to 4I channel set
and renamed it to match corresponding engine status label.

[NEW] Added DEF profile.

[NEW] Engine serial is now added to log file names even when it is invalid.
Replacement value is only used if serial number is not set.

[FIX] Saving all logs failed when not all possible profile logs were not available in
ECU software.

[FIX] Parse SAE standard error values correctly when value is vendor defined.

[FIX] Hardware auto configuration was not done on ECU change when new ECU was
connected before tool dropped internal state.

[FIX] Service information 'Rail Extended Limp Home Time' time value is now interpreted
correctly from ECU.

[FIX] Fix seed&key algorithm loading logic. Relative paths to algorithm libraries
caused DLLs not to load correctly in Windows XP.

[FIX] Fix oscilloscope cursor issue in case where channel value is stable.

[FIX] Fix oscilloscope cursor initial color to match with channel color.



################################
# WinEEM4 1.24 Release Notes #
################################

[NEW] Updated engine types in connection dialog.

[NEW] Updated 4F error codes.

[NEW] Added default file name for all log saves, including 'all logs' save.

[NEW] Added units to log file profile tables.

[NEW] Added absolute fuel pressure into engine status view.

[NEW] Added oscilloscope channel management functionalities

[NEW] Added emission number to system information page.

[NEW] Added EAT degradation level to Engine status view.

[NEW] Added separate actuator test view for SCR tank heater.

[NEW] Catalyst cleanup now displays cooldown state during execution.

[NEW] Added fuel pre-filter pressure value into engine status view.

[CHANGE] Changed start motor actuator test text to more exlicit form.
"Starter Motor (engine will not start)"

[CHANGE] Added abs/rel information to engine status pressure value labels.

[CHANGE] Coolant temperature, visco fan and DEF tank level tests no longer
deactivates when leaving view.

[CHANGE] Timeouted measured value is now set to N/A.

[CHANGE] Renamed 'Urea Reverting Valve Control' actuator test to 'DEF Reverting
Valve Control'.

[CHANGE] Actuator test view is no longer a modal dialog. Is normal engine test
view instead.

[CHANGE] Reorganize Service tool oscilloscope predefined channel sets.

[CHANGE] Sort logs by default by engine hours value where available.

[FIX] Performance and usability fixes

[FIX] Delivery rate test result was mixed bitween 'first pcv react' and 'pressure
condition violation'.

 

[Auto-epc]

Thanks for your post.

 

[Master]

JCB SISU Power WinEEM4 2.7.2 Service Tool

 

[Chady Saliya]

JCB electronic service tool is compatible with JCB Service Master 4 software and works with the CAN protocol of OBD-II systems to ensure seamless integration into existing systems. It also comes with instructions for use, repair and diagnosis of vehicles with JCB engines, Isuzu, Deutz and Cummins engines.

The tool also contains complete original JCB repair and maintenance manuals and bulletins, as well as JCB spare parts for all markets. This makes it a valuable resource for anyone who uses JCB machines, providing access to all the information and parts they need for maintenance and repairs.

For added convenience, the tool supports multiple languages, including English, German, Spanish, French, Italian and Portuguese, making it accessible to users around the world. Moreover, the tool allows you to program special parameters, so you can further tune and optimize your machine's performance.

Overall, the 2024 JCB Agriculture Construction Diagnostic Scanner Tool Full Set for JCB Master Spare Parts with Diagnostics + Tablet is an essential tool for anyone working with JCB machinery, as it has all the functions and features required for efficient maintenance and repairs.