Hidromek Motor Grader HMK 600 MG Operation Maintenance Manual R60012401 EN

[Hyundai]

Download this document, you need 1050 Gallons

Hidromek Motor Grader HMK 600 MG Operation Maintenance Manual R60012401 EN
Size: 17.70 MB
Format: PDF
Language: English
Brand: Hidromek
Type of Machine: Motor Grader
Type of Manual: Operation Maintenance Manual
Model: Hidromek HMK 600 MG Motor Grader
Tier 3 / Stage IIIA
Serial Number: 1GCI0003 and UP
Publication Number: R60012401
Publication Date: 2024
Number of Pages: 178 Pages

Contents:
WARRANTY CONDITIONS
1. INTRODUCTION

1.1. GENERAL INFORMATION​

1.2. CE, UKCA MARKING, DECLARATION OF CONFORMITY AND EMC DIRECTIVE​

1.3. BEFORE STARTING OPERATION AND MAINTENANCE​

1.4. INTENDED USE OF MACHINE​

1.5. DIRECTIONS OF MACHINE​

1.6. SAFETY INFORMATION​

1.7. "CORRECT" AND "WRONG" MARKINGS IN SOME FIGURES​

1.8. COPYRIGHT​

1.9. DRIVING LICENSE​

1.10. SPARE PARTS ORDERING PROCEDURE​

1.11. LOCATION OF MACHINE AND ENGINE ID PLATES​

1.12. TABLE TO ENTER SERIAL NO. AND DISTRIBUTOR INFORMATION​

2. WORK SAFETY

2.1. LOCATIONS OF WARNING LABELS AND DECALS​

2.2. CONTENTS OF WARNING LABELS AND DECALS​

2.3. GENERAL PRECAUTIONS​

2.4. PRECAUTIONS BEFORE OPERATION​

2.5. PRECAUTIONS DURING OPERATION​

2.6. PRECAUTIONS WHILE DRIVING ON ROAD​

2.7. PRECAUTIONS AFTER OPERATION​

2.8. PRECAUTIONS DURING SERVICE AND MAINTENANCE​

2.9. GETTING ON AND OFF THE MACHINE​

3. KNOW YOUR MOTOR GRADER

3.1. MAIN COMPONENTS AND PARTS​

3.2. OPERATOR'S CAB​

3.3. STEERING COLUMN​

3.4. INSTRUMENT PANEL​

3.5. MENU CONTENTS​

3.6. SIDE CONTROL PANEL​

3.7. STARTER SWITCH​

3.8. GEAR SHIFTING​

3.9. ACCELERATOR PEDAL​

3.10. BRAKE PEDAL​

3.11. INCHING PEDAL​

3.12. CRUISE CONTROL​

3.13. JOYSTICKS​

3.14. OPTIONAL ATTACHMENT CONTROL LEVERS​

3.15. OPERATOR'S SEAT​

3.16. ADJUSTING SEAT BELT​

3.17. ADJUSTING CONSOLE HEIGHT​

3.18. ADJUSTING CONSOLE FORE-AFT POSITION​

3.19. LIFTING THE LEFT CONSOLE​

3.20. ARTICULATION LOCK PIN​

3.21. EMERGENCY EXIT​

3.22. FIRST AID KIT​

3.23. WINDOW WASHER FILLER CAP​

3.24. STORAGE COMPARTMENT​

3.25. SCREENS​

3.26. SIDE WINDOWS​

3.27. DOOR​

3.28. DOOR FIXING MECHANISM​

3.29. FIRE EXTINGUISHER (if equipped)​

3.30. BATTERY SWITCH​

4. OPERATION

4.1. NEW MACHINE BREAK-IN​

4.2. IF THE MACHINE HAS A PROBLEM​

4.3. PRE-START INSPECTION​

4.4. BEFORE STARTING ENGINE​

4.5. STARTING ENGINE​

4.6. AFTER STARTING THE ENGINE​

4.7. BEFORE MOVING THE MACHINE​

4.8. MOVING THE MACHINE​

4.9. CHANGING SPEED​

4.10. OPERATING ON SLOPES​

4.11. OPERATING ON ROUGH TERRAIN​

4.12. OPERATING ON SNOW AND ICE​

4.13. STOPPING THE MACHINE​

4.14. PARKING THE MACHINE​

4.15. PRECAUTIONS FOR USING ATTACHMENT CONTROLS​

4.16. OPERATING ADJUSTMENTS​

4.17. OPERATING TECHNIQUES​

4.18. PREPARATION FOR A TRIP​

4.19. TRANSPORTATION​

4.20. LIFTING THE MACHINE WITH A CRANE​

4.21. SPECIAL SITUATIONS​

4.22. LONG TERM STORAGE OF THE MACHINE​

4.23. INSTRUCTIONS ON WITHDRAWAL FROM USE AND UTILIZATION​

5. MAINTENANCE

5.1. GENERAL INSTRUCTIONS​

5.2. PERIODICAL REPLACEMENT OF SAFETY- RELATED PARTS​

5.3. PERIODIC INSPECTION OF SERVICE BRAKES​

5.4. STANDARD TIGHTENING TORQUES FOR BOLTS AND NUTS​

5.5. PERIODICAL INSPECTION AND MAINTENANCE LIST​

5.6. OIL, FUEL, COOLANT​

5.7. CHECKS BEFORE STARTING​

5.8. EVERY 10 HOURS OR DAILY MAINTENANCE​

5.9. INITIAL 50 HOURS MAINTENANCE​

5.10. EVERY 50 HOURS (OR WEEKLY) MAINTENANCE​

5.11. EVERY 250 HOURS (OR MONTHLY) MAINTENANCE​

5.12. EVERY 500 HOURS OR 3 MONTHLY MAINTENANCE​

5.13. EVERY 1000 HOURS (6 MONTHS) MAINTENANCE​

5.14. EVERY 2000 HOURS (ANNUAL) MAINTENANCE​

5.15. EVERY 2 YEARS MAINTENANCE​

5.16. WHEN REQUIRED​

6. TROUBLESHOOTING

6.1. ENGINE​

6.2. CHASSIS​

6.3. ATTACHMENTS​

7. TECHNICAL SPECIFICATIONS
8. CONTACT INFORMATION

8.1. PLANT AND AFTER SALES SERVICES​