Hidromek HMK 102B SUPRA & ALPHA GreenTec Operation Maintenance Manual EN

[Hyundai]

Download this document, you need 1050 Gallons

Hidromek HMK 102B SUPRA & ALPHA GreenTec Operation Maintenance Manual EN
Size: 41.45 MB
Format: PDF
Language: English
Brand: Hidromek
Type of Machine: Backhoe Loader
Type of Manual: Operation Maintenance Manual
Model: Hidromek HMK 102B SUPRA GreenTec, HMK 102B ALPHA Greentec
Tier4 Final / Stage IIIB, V
Latest Publication Date: 2022

List of Files:
Hidromek HMK 102B SUPRA & ALPHA Greentec Operation Maintenance Manual Y1013031.pdf (249 Pages):

1.1. FOREWORD​

1.2. CE MARKING AND EMC DIRECTIVE​

1.3. IDENTIFICATION PLATES​

1.4. BACKHOE LOADER​

1.5. SAFETY NOTICES​

1.6. OTHER NOTICES​

1.7. ENVIRONMENTAL STANDARDS​

1.8. WARNING SYMBOLS​

1.9. COPYRIGHT​

1.10. SPARE PARTS AND SERVICE​

2.1. GENERAL SAFETY INFORMATION​

2.2. SAFETY PRECAUTIONS​

2.3. PRE-START SAFETY​

2.4. SAFETY DURING OPERATION​

2.5. INSPECTION & MAINTENANCE SAFETY​

2.6. BATTERY SAFETY​

2.7. WARNING LABELS & DECALS​

2.8. PROHIBITED MACHINE OPERATION​

2.9. END OF WORKSHIFT MAINTENANCE & INSPECTION​

3.1. FRONT INSTRUMENT PANEL​

3.2. RIGHT HAND SIDE INSTRUMENT PANEL​

3.3. LEFT HAND SIDE CONSOLE​

3.4. OPERATOR’S SEAT​

3.5. BACKHOE JOYSTICKS​

3.6. AUXILIARY VALVE PEDAL​

3.7. REAR WINDOW AND REAR WINDOW WIPER​

3.8. DOOR​

3.9. DOOR WINDOW FIXING MECHANISM​

3.10. ROOF​

3.11. TOOLBOX​

3.12. SAFETY STRUT​

3.13. OPENING THE ENGINE HOOD​

3.14. OPENING THE SIDE PANELS​

3.15. OPENING THE FRONT PANEL​

3.16. BATTERY DISCONNECT SWITCH​

4.1. GENERAL​

4.2. BEFORE STARTING THE ENGINE​

4.3. STARTING THE ENGINE​

4.4. AFTER STARTING ENGINE​

4.5. DRIVING THE MACHINE​

4.6. JUMP STARTING THE ENGINE​

4.7. DPF REGENERATION PROCESS​

4.8. BASIC PRECAUTIONS FOR OPERATION IN COLD AND HOT CLIMATE​

4.9. PREPARATIONS FOR TRAVEL​

4.10. STOPPING THE ENGINE​

4.11. AFTER STOPPING ENGINE​

4.12. STOPPING and PARKING THE MACHINE​

4.13. UNINTENTIONAL SHUT DOWN DURING TRAVEL​

4.14. FIELD TEST OF THE EMERGENCY STEERING​

4.15. ENGAGING ATTACHMENT SAFETY LOCKS​

4.16. CONTROLLING HYDRAULIC CLAMP CYLINDERS​

4.17. SIDESHIFTING THE BACKHOE​

4.18. TELESCOPIC DIPPER (OPTIONAL)​

4.19. BRAKING​

4.20. THE LOADER OPERATION​

4.21. THE BACKHOE OPERATION​

4.22. REPLACING ATTACHMENTS​

4.23. TRANSPORTING THE MACHINE​

4.24. TOWING PROCEDURE OF A DISABLED MACHINE​

4.25. LIFTING BY A CRANE​

4.26. PRESERVING THE MACHINE FOR STORAGE​

4.27. INSTRUCTIONS ON WITHDRAWAL FROM USE AND UTILIZATION​

5.1. GENERAL INFORMATION​

5.2. GENERAL SAFETY PRECAUTIONS​

5.3. INSPECTION & MAINTENANCE CHART​

5.4. PERIODIC MAINTENANCE​

5.5. LUBRICANTS & FLUIDS​

5.6. PRE-START (EVERY 8 HOURS) INSPECTION & MAINTENANCE​

5.7. WEEKLY (EVERY 50 HOURS) INSPECTION & MAINTENANCE​

5.8. EVERY 100 HOURS INSPECTION & MAINTENANCE​

5.9. EVERY 250 HOURS INSPECTION & MAINTENANCE​

5.10. EVERY 500 HOURS INSPECTION & MAINTENANCE​

5.11. EVERY 500 HOURS OR 1 YEAR INSPECTION & MAINTENANCE​

5.12. EVERY 1000 HOURS INSPECTION & MAINTENANCE​

1.1.​

5.13. EVERY 1500 HOURS MAINTENANCE​

5.14. EVERY 2000 HOURS MAINTENANCE​

5.15. EVERY 2 YEARS OR 3000 HOURS MAINTENANCE​

5.16. EVERY 3000 HOURS MAINTENANCE​

5.17. WHEN REQUIRED​

6.1. TECHNICAL SPECIFICATIONS OF HMK 102B​

6.2. LIFTING REGULATIONS AND SAFE WORKING LOADS (SWL)​

6.3. SOUND and VIBRATION​

7.1. GENERAL​

7.2. QUICK COUPLINGS​

7.3. TILTING FORKS​

7.4. HYDRAULIC BREAKER​

7.5. ADDITIONAL HYDRAULIC LINE (OPTIONAL)​

7.6. HYDRAULIC AUGER​

7.7. LOG GRAB​

7.8. GRADING BLADE​

7.9. AIR COMPRESSOR​

7.10. FORKLIFT ATTACHMENT & CLAMSHELL BUCKET​

7.11. TRAPEZOID DITCH BUCKET​

7.12. RIPPER​

7.13. SIDE SHIFT BUCKET​

7.14. CLAMSHELL GRAB​

7.15. WINCH​

7.16. STREET SWEEPER​

7.17. QUICK COUPLER​

8.1. HAND SIGNALS​

8.2. TABLE OF TORQUE VALUES FOR FASTENERS​

8.3. CONTACTS​

8.4. NOTES​

Hidromek HMK 102B SUPRA & ALPHA GreenTec Operation Maintenance Manual Y1303201 2022.pdf (291 Pages):

1.1. FOREWORD​

1.2. CE,UKCA MARKING AND EMC DIRECTIVE​

1.3. IDENTIFICATION PLATES​

1.4. BACKHOE LOADER​

1.5. SAFETY NOTICES​

1.6. OTHER NOTICES​

1.7. ENVIRONMENTAL STANDARDS​

1.8. WARNING SYMBOLS​

1.9. COPYRIGHT​

1.10. SPARE PARTS AND SERVICE​

2.1. GENERAL SAFETY INFORMATION​

2.2. SAFETY PRECAUTIONS​

2.3. PRE-START SAFETY​

2.4. SAFETY DURING OPERATION​

2.5. INSPECTION & MAINTENANCE SAFETY​

2.6. BATTERY SAFETY​

2.7. WARNING LABELS & DECALS​

2.8. PROHIBITED MACHINE OPERATION​

2.9. END OF WORKSHIFT MAINTENANCE & INSPECTION​

3.1. FRONT INSTRUMENT PANEL​

3.2. RIGHT HAND SIDE INSTRUMENT PANEL​

3.3. LEFT HAND SIDE CONSOLE​

3.4. OPERATOR’S SEAT​

3.5. BACKHOE JOYSTICKS​

3.6. ATTACHMENT CONTROL PEDALS​

3.7. REAR WINDOW AND REAR WINDOW WIPER​

3.8. DOOR​

3.9. DOOR WINDOW FIXING MECHANISM​

3.10. ROOF​

3.11. TOOLBOX​

3.12. SAFETY STRUT​

3.13. OPENING THE ENGINE HOOD​

3.14. OPENING THE SIDE PANELS​

3.15. OPENING THE FRONT PANEL​

3.16. BATTERY DISCONNECT SWITCH​

4.1. GENERAL​

4.2. BEFORE STARTING THE ENGINE​

4.3. STARTING THE ENGINE​

4.4. AFTER STARTING ENGINE​

4.5. DRIVING THE MACHINE​

4.6. JUMP STARTING THE ENGINE​

4.7. DPF REGENERATION PROCESS​

4.8. BASIC PRECAUTIONS FOR OPERATION IN COLD AND HOT CLIMATE​

4.9. PREPARATIONS FOR TRAVEL​

4.10. STOPPING THE ENGINE​

4.11. AFTER STOPPING ENGINE​

4.12. STOPPING and PARKING THE MACHINE​

4.13. UNINTENTIONAL SHUT DOWN DURING TRAVEL​

4.14. STEERING IN CASE OF EMERGENCY​

4.15. FIELD TEST OF THE EMERGENCY STEERING​

4.16. ENGAGING ATTACHMENT SAFETY LOCKS​

4.17. CONTROLLING HYDRAULIC CLAMP CYLINDERS​

4.18. SIDESHIFTING THE BACKHOE​

4.19. TELESCOPIC DIPPER (OPTIONAL)​

4.20. BRAKING​

4.21. THE LOADER OPERATION​

4.22. THE BACKHOE OPERATION​

4.23. REPLACING ATTACHMENTS​

4.24. TRANSPORTING THE MACHINE​

4.25. TOWING PROCEDURE OF A DISABLED MACHINE​

4.26. LIFTING BY A CRANE​

4.27. PRESERVING THE MACHINE FOR STORAGE​

4.28. INSTRUCTIONS ON WITHDRAWAL FROM USE AND UTILIZATION​

5.1. GENERAL INFORMATION​

5.2. GENERAL SAFETY PRECAUTIONS​

5.3. INSPECTION & MAINTENANCE CHART​

5.4. PERIODIC MAINTENANCE​

5.5. LUBRICANTS & FLUIDS​

5.6. PRE-START (EVERY 8 HOURS) INSPECTION & MAINTENANCE​

5.7. WEEKLY (EVERY 50 HOURS) INSPECTION & MAINTENANCE​

5.8. EVERY 100 HOURS INSPECTION & MAINTENANCE​

5.9. EVERY 250 HOURS INSPECTION & MAINTENANCE​

5.10. EVERY 500 HOURS INSPECTION & MAINTENANCE​

5.11. EVERY 500 HOURS OR 1 YEAR INSPECTION & MAINTENANCE​

5.12. EVERY 1000 HOURS INSPECTION & MAINTENANCE​

5.13. EVERY 2000 HOURS MAINTENANCE​

5.14. EVERY 3000 HOURS MAINTENANCE​

5.15. EVERY 2 YEARS OR 3000 HOURS MAINTENANCE​

5.16. EVERY 4000 HOURS MAINTENANCE​

5.17. EVERY 4500 HOURS MAINTENANCE​

5.18. EVERY 6000 HOURS MAINTENANCE​

5.19. EVERY 10000 HOURS MAINTENANCE​

5.20.​

5.21. WHEN REQUIRED​

6.1. TECHNICAL SPECIFICATIONS OF HMK 102B​

6.2. LIFTING REGULATIONS AND SAFE WORKING LOADS (SWL)​

6.3. SOUND and VIBRATION​

7.1. GENERAL​

7.2. QUICK COUPLINGS​

7.3. TILTING FORKS​

7.4. HYDRAULIC BREAKER​

7.5. ADDITIONAL HYDRAULIC LINE (OPTIONAL)​

7.6. HYDRAULIC AUGER​

7.7. LOG GRAB​

7.8. GRADING BLADE​

7.9. AIR COMPRESSOR​

7.10. FORKLIFT ATTACHMENT & CLAMSHELL BUCKET​

7.11. TRAPEZOID DITCH BUCKET​

7.12. RIPPER​

7.13. SIDE SHIFT BUCKET​

7.14. CLAMSHELL GRAB​

7.15. WINCH​

7.16. STREET SWEEPER​

7.17. QUICK COUPLER​

8.1. HAND SIGNALS​

8.2. TABLE OF TORQUE VALUES FOR FASTENERS​

8.3. CONTACTS​

8.4. NOTES​