Haulotte Articulating Boom Lift HA32RTJ PRO to HA130RTJ PRO Operators Manual 4000390440 07.2013 EN

[Momed80]

Download this document, you need 500 Gallons

Haulotte Articulating Boom Lift HA32RTJ PRO to HA130RTJ PRO Operators Manual 4000390440 07.2013 EN
Size: 21.24 MB
Format: PDF
Language: English
Brand: Haulotte
Type of Machine: Articulating Boom Lift
Type of Manual: Operators Manual
Model: Haulotte HA32RTJ PRO, HA100RTJ PRO, HA41RTJ PRO, HA130RTJ PRO Articulating Boom Lift
Part Number: 4000390440
Publication Date: 07.2013
Number of Pages: 148 Pages

Contents:
A- Foreword
1 - User Responsibility
1.1 - Owner's Responsibility
1.2 - Employer's Responsibility
1.3 - Trainer's Responsibility
1.4 - Operator's Responsibility
2 - Safety
2.1 - Safety Instructions
3 - Safety Inquiries
4 - Incident Notification
5 - Compliance
5.1 - Declaration Of Conformity
5.2 - Product Information
5.3 - Product Specifications
B- Familiarization
1 - General Safety
1.1 - Intended Use
1.2 - Decal Content
1.3 - Symbols And Colors
1.4 - Level Of Severity
1.5 - Symbols Legend And Definitions
2 - Models Description
3 - Primary Machine Components
3.1 - Layout
3.2 - Ground Control Box
3.3 - Platform Control Box
3.4 - Axle Extension Control Box
4 - Performance Specifications
4.1 - Technical Characteristics
4.2 - Working Area / Range Of Motion
5 - Decals And Markings Locations
C- Pre-Operation Inspection
1 - Recommendations
2 - Working Area Assessment
3 - Inspection And Functional Test
3.1 - Daily Inspection
4 - Safety Functional Checks
4.1 - E-Stop Button Check
4.2 - Activation Of Controls
4.3 - Fault Detector
4.4 - Automatic Engine Cut-Out
4.5 - Overload Sensing System
4.6 - Oscillating Axles
4.7 - Slope Warning Device
4.8 - Travel Speed Limitation
4.9 - Movement Speed
4.10 - On-Board Electronics
4.11 - Operating Temperature (For Russia And The Ukraine Only)
4.12 - Radius Limitation
4.13 - Axle Extension
4.14 - Drive Buzzer
4.15 - Boom Control System
D- Operation Instructions
1 - Operation
1.1 - Introduction
1.2 - Operation From The Ground Control Box
1.3 - Operation From The Platform Control Box
1.4 - Operation Of Overriding System From Ground Control Box
2 - Ground Control Box
2.1 - To Start And Stop The Machine
2.2 - Boom And Arm Controls
2.3 - Additional Controls From The Ground Control Box
3 - Platform Control Box
3.1 - To Start And Stop The Machine
3.2 - Drive And Steer Control
3.3 - Boom And Arm Controls
3.4 - Additional Controls
4 - Axle Extension Control Box
4.1 - Prepare The Machine
4.2 - Axle Extension Operation
4.3 - Axle Retraction Operation
5 - Link Piece Position Check
6 - Radius Limitation
6.1 - Principle
6.2 - Procedure
7 - Emergency Procedure
7.1 - In Case Of Power Loss
7.2 - To Rescue Operator In Platform
7.3 - No Power Available
8 - Transportation
8.1 - Putting In Transport Position
8.2 - Machine Layout
8.3 - Unloading
8.4 - Towing
8.5 - Storage
8.6 - Lifting Operation
9 - Cold Weather Recommendations
9.1 - Engine Oil
9.2 - Hydraulic Oil
9.3 - Preheating Operation
E- General Specifications
1 - Machine Dimensions
2 - Major Component Masses
3 - Acoustics And Vibrations
4 - Wheel/Tire Assembly
4.1 - Technical Specifications
4.2 - Inspection And Maintenance
5 - Options
5.1 - On-Board Generator
5.2 - Welder's Kit
5.3 - Plumber's Kit
5.4 - Glazier's Kit
5.5 - Activ' Shield Bar - Secondary Guarding System
F- Maintenance
1 - General
2 - Maintenance Schedule
3 - Inspection Program
3.1 - General Program
3.2 - Daily Inspection
3.3 - Periodic Inspection
3.4 - Reinforced Inspection
3.5 - Major Inspection
4 - Repairs And Adjustments
G- Other Information
1 - Warranty Disclosure
1.1 - After Sales Service
1.2 - Manufacturer's Warranty
2 - Subsidiary Contact Information