Case IH Axial Rotary Combines AF9 AF10 Operators Manual 92676143 2025

[Hyundai]

Download this document, you need 2725 Gallons

Case IH Axial Rotary Combines AF9 AF10 Operators Manual 92676143 2025
Size: 182.44 MB
Format: PDF
Language: English
Brand: Case IH
Type of Machine: Axial Rotary Combines
Type of Manual: Operators Manual
Model: Case IH AF9, AF10 Axial Rotary Combines
Part Number: 92676143
Publication Date: 2025
Number of Pages: 1030 Pages

Contents:
GENERAL INFORMATION

Note to the Owner​

Intended use​

Engine tampering​

Electro-Magnetic Compatibility (EMC)​

Cybersecurity declarations​

Manual scope​

Product identification​

Operator's manual storage on the machine​

SAFETY INFORMATION

Safety alert symbol and signal word definition​

Safety signs – Overview​

General safety rules​

General maintenance safety rules​

Wheel and tire safety​

Transporting on public roads​

Fire prevention​

Fire extinguisher​

Battery safety​

Battery disconnect switch​

Seat belt precautions​

Instructional seat safety​

Operator presence system​

Safety rules​

Warning lights​

Air-conditioning system​

Reverse alarm and light​

Personal Protective Equipment (PPE)​

Do Not Operate hang tag​

Hazardous chemicals​

Electrical storm safety​

Utility safety​

Mounting and dismounting precautions​

Operating the machine​

Connecting a header​

Hydraulic system safety​

Working at heights​

Ecology and the environment​

Illustrations​

Lift cylinder lockout​

Urgent stop button​

Airborne noise emission​

Vehicle vibration levels​

Machine disposal​

Safety signs – Right-hand side​

Safety signs – Front​

Safety signs – Left-hand side​

Safety signs – Rear​

Safety signs – Top​

Road travel signs and decals​

Informational decals​

CONTROLS AND INSTRUMENTS

Access to operator's platform​

Machine access​

Access to operator's platform​

Rear platform access​

Engine access​

Rotary dust screen – access​

Transmission access​

Side shields – Open/Close​

Service platforms and shielding​

Handwash station​

Rotor module – Access​

Cleaning system – Access folding hitch/step​

Grain tank – Covers​

Grain tank access​

Clean out doors​

Grain tank – Clean out covers​

Adjustable threshing cage – Access​

Battery access​

Access to operator’s platform​

Cab mirrors – access​

Folding ladder - If equipped​

Cab layout​

Emergency exit​

Operator's seat​

Operator's seat​

Seat belt – Operator’s seat​

Instructional seat​

Instructional seat – Overview​

Seat belt – Instructional seat​

Under seat cooler​

Forward controls​

Steering column​

Urgent stop button​

Foot controls​

Right-hand side controls​

Threshing controls​

Cleaning controls​

Grain handling​

Residue controls​

Machine controls​

Start console​

Multi-Function Handle (MFH)​

Unload tube​

Pivoting unloading spout​

Quick stop​

Feedrate control​

AFS Accuguide™​

Automatic Header Height Control (AHHC)​

Configurable header position control – MFH​

Configurable reel position control​

Configurable position control Setting​

Feeder fore/aft tilt – In cab adjustment​

Grain tank unloading drive​

Shift button​

Right-hand console​

Drive engagement switches​

Reel drive – Controls​

Rotor speed – Switch​

Module to rotor clearance – Controls​

Rotor discharge deflector switch​

Remote adjustable vanes – switch​

Threshing short cut – shortcut switch​

Cleaning fan speed control – Switch​

Upper sieve – Switch​

Lower sieve – Switch​

Cleaning settings shortcut – switch​

Gear selector​

Throttle control​

Light memory – switch​

Road / Auto guide mode – switch​

Grain tank covers – switch​

Folding unload tube – switch​

Chopper counter knife – Position switch​

Spreader speed – Control switch​

Spread distribution – switch​

Residue spreader – shortcut switch​

Automatic differential – switch​

Parking brake​

Variable Powered Rear Axle (VPRA) – Control​

High/Low – Control​

Header height control​

Feeder – Controls​

Vertical knife – Control​

AFS Pro-1200​

Armrest - Overview​

Rearward controls​

Rear window​

Cab features – Storage and fuse access​

Overhead controls​

Overhead controls​

Sun screens​

Cab climate controls​

Overhead storage​

Cab radio​

Cab radio - DEA730 radio​

Phone app​

Interior lamps​

Communication equipment – Power connection and mounting​

Exterior controls​

Exterior switches – Rear frame control panel​

Battery connect – operation​

Display​

AFS®Pro 1200 display​

AFS® Pro 1200 display overview – Overview​

Notification bar​

Machine status area​

Work switch status​

Faults & Warnings​

Global Navigation Satellite System (GNSS)​

Connectivity​

Applications​

Help​

Clock​

User Profiles​

Menu - Settings​

Headers​

Calibrations​

Menu screens​

System settings​

Data settings​

ISOBUS settings​

Connectivity settings​

Header settings​

Combine settings​

Header setup​

FD2/D2 Header​

Combine corn header – Set up​

Grain header – Set up​

Draper/Varifeed™ header – Set up​

Pickup header – Set up​

Procedures & Calibration​

Yield & Moisture Monitor​

GNSS & Guidance settings​

Activations​

Diagnostics​

AFS® Pro 1200 diagnostics and troubleshooting​

Header diagnostics​

Combine diagnostics​

Productivity​

Automatic Crop Settings (ACS)​

AFS Harvest Command™ – Overview​

Camera - Overview​

Procedures & Calibration​

Procedures​

Calibrations​

Concave opening​

Feeder fore/aft tilt​

Gear position​

Inclination sensor(s)​

Hydro-mechanical rotor​

Side Shake Upper Shoe​

Remote adjustable vanes​

Header Height Control​

Pivoting unloading spout​

Spreader Frame Position​

Swath Door Position – Actuator​

Side Shake Grain Pan​

Sieves – Upper and lower sieves​

Steering Angle​

Suspended Tracks Height - Height​

Folding unload tube​

Feeder Hydro-mechanical​

Zero Returns​

Counter knives​

Distance calibration​

Unloading tube swing​

Chopper gearbox​

Rotor gearbox​

Steering valve​

Calibration error list​

Procedure Overview​

Kill stall​

Sieves – Pressure sensor test​

Automatic Deslug Feeder​

Automatic Deslug Feeder + Rotor – System overview​

Fluid level check​

Rotor Loss Sensor – Test​

ActiveTrac 4-Roller Track – Tension / Untension​

Sieve Loss Sensor – Test​

Cleanout control​

Run screens​

Overview​

Sensitivity settings​

Lighting and mirrors​

Lighting controls​

Lighting and mirrors​

OPERATING INSTRUCTIONS

Commissioning the unit​

Before driving the combine​

ActiveTrac 4-Roller Track​

Track Transmission Unlock​

Starting the unit​

Daily start up procedure​

Starting the engine – Cold weather​

Stopping the unit​

Stopping the engine​

Stopping the engine​

Engine idle speed​

Moving the unit​

Moving the machine​

Road travel​

ActiveTrac 4-Roller Track – Road travel​

ActiveTrac 4-Roller Track​

Parking brake – Manual release​

Transmission – Manual shifting​

TRANSPORT OPERATIONS

Preparing for road transport​

Jacking points – Locations​

Transporting on a trailer – Tie downs for shipping​

Lifting the machine​

Transport latches​

Operator's platform – Prepare for transport​

Engine shield​

Attaching a trailer​

Speed and gradeability​

Recovery transport​

Towing the machine​

WORKING OPERATIONS

General information​

Introduction to harvesting​

Initial crop settings​

NO TITLE

NO TITLE​

NO TITLE​

NO TITLE

NO TITLE​

NO TITLE​

NO TITLE

NO TITLE​

NO TITLE​

Performance indicators​

Change from grain to corn configuration​

Losses​

Kill-Stall diagnosis​

Crop setup values – Crop condition adjustment​

Header height control​

Header height control – Overview​

Header status – Header Height Control Status Icons​

Header height control – Manual mode​

Header height control – Sensitivity​

Header height control – Return To Cut (RTC) mode​

Header height control – Auto Header Height Control (AHHC)​

Header height control – Pressure float mode​

Header height control – Lateral tilt​

Feedrate control​

Feedrate control​

Automatic Crop Settings (ACS)​

ACS Automatic Crop Settings​

AFS Harvest Command™​

AFS Harvest Command™ – Overview​

AFS Harvest Command™ – Activation​

AFS Harvest Command™ – Run screen​

AFS Harvest Command™ – Basic tab​

AFS Harvest Command™ – Advanced tab​

AFS Harvest Command™ – Sensitivities tab​

AFS Harvest Command™ – Headland tab​

AFS Harvest Command™ – Status tab​

AFS Harvest Command™ – Ranges tab​

AFS Harvest Command™ – Information​

AFS Harvest Command™ – Operation​

AFS Harvest Command™ – Sensitivity adjustment​

Automation – Residue control​

Header connection​

Connecting a header​

Disconnecting a header​

Feeding​

Feeding​

Synchronized Feed System (SFS) - Rock trap​

Synchronized Feed System (SFS) – Reverser​

Feeder drum – Adjust lower stop​

Feeder chain – Adjustment​

Feeder chain – Link removal​

Reel speed​

Feeder reverse system - Overview​

Threshing​

Rotor overview​

Threshing concave – overview​

Module Adjustment – Position overview​

Concave - Remove​

Concave - Install​

Concave position – Minimum, maximum concave opening​

Concave H-Frame – Leveling​

Concave H-Frame – Side shift adjustment​

Concave H–frame stop bolt adjustment​

Threshing and separation​

Suggested start up configurations for major crops​

Rotor overview​

Rotor deslug​

Separation​

Separator grates - Overview​

Separator grates - Remove​

Separator grates - Install​

Beater / Chopper​

Hood mounted chopper​

Integrated chopper​

Discharge beater​

Discharge beater grate​

Integrated chopper​

Integrated chopper – Chopper grate​

Cleaning​

Cleaning – System overview​

Cleaning system​

Sieves – Controls​

Sieves – Calibrate​

Sieves – Removal​

Sieves – Installation​

Cleaning fan​

Automatic cleaning fan speed​

Tailings system​

Tailings return system - Adjust​

Tailings return system - Overview – Cover storage location​

Grain handling​

Grain handling​

Unloading​

Grain sample access​

Grain tank with covers​

Unloading tube – Folding unload tube​

Pivoting unloading spout​

Unloading operation​

Grain handling deslug – Clean out​

Residue handling​

Residue handling​

Chaff deflectors​

Chaff pan​

Chaff pan – Position for sieve removal​

Chaff pan – Loss check position (Hood mounted chopper only)​

Discharge deflector​

Swath chute – and Straw rakes​

Residue controls – In cab spreader controls​

In cab residue mode control​

Residue handling – Operational Modes​

Troubleshooting​

Integrated chopper​

Horizontal Disc Spreader​

Spreader Integrated Chopper​

Integral chopper – Overview​

Integrated chopper counter knives​

Integrated chopper counter knives – Lateral adjustment​

Knife replacement – Integrated Chopper counter knives​

Knife replacement – Chopper​

Horizontal Disc Spreader​

Residue handling – Disc spreader integrated chopper configuration​

Horizontal disc spreader – Recommended operational settings – Integrated Chopper​

Residue spreader – Position​

Swath Door Position – (if equipped)​

Swath roller – (if equipped)​

Oscillating deflector​

Spreader Integrated Chopper – Spread width adjustment​

Horizontal spreader – Recommended operational settings – Integrated Chopper​

Hood mounted chopper​

Spreader Hood Mounted Chopper​

Hood mounted chopper – Overview​

Hood mounted chopper​

Chopper speed​

Counter knife​

Swath Door Position – (if equipped)​

Counter knife – Blades​

Straw chopper – Blades​

Straw chopper blades - configuration for corn​

Straw beater – Blades​

Spreader Hood Mounted Chopper – Position​

Spreader Hood Mounted Chopper – Spread width adjustment​

Oscillating deflector​

Chopper bypass – (If equipped)​

Horizontal spreader – Recommended operational settings – Hood Mounted Chopper​

MAINTENANCE

General information​

Maintenance - Overview​

Torque specifications for hardware​

Torque - Standard torque data for hydraulic connections - Standard torque data for hydraulic connections​

Chain wear tables - roller chains​

Battery – Overview​

Battery box ventilation – Overview​

Battery – Charging and jump starting​

Air reservoir​

General specification - Biodiesel fuels​

Organic Acid Technology (OAT) coolant​

Engine oils​

Engine oils​

Fluids, lubricants, and capacities​

Maintenance planning​

Maintenance chart​

Every 10 hours or daily during the first week​

Wheel bolt torque​

Every 2 hours​

ActiveTrac 4-Roller Track​

After the first 10 hours​

Belt tension​

Every 10 hours or daily​

Cab air pre-filter - Cleaning – Pre-screen​

Rotary dust screen – Cleaning​

Cooler fan gearbox – Gearbox level​

Check the engine oil level​

Power Take-Off (PTO) gearbox oil level​

Hydraulic oil tank​

Rock trap​

Coolant level​

Coolant level​

ActiveTrac 4-Roller Track – Inspection​

ActiveTrac 4-Roller Track – Suspended track Inspection​

Hood mounted chopper – Cleaning​

Hood mounted chopper – Straw chopper blades​

Hood mounted chopper – Counter knife blades​

Every 50 hours or weekly​

Front face adjustment – wear strip check​

Every 50 hours​

50-hour grease points​

Tire pressure – Check​

Rotary dust screen - Brush adjustment​

Feeder conveyor chain​

Belt tension​

ActiveTrac 4-Roller Track – Oil level​

Every 100 hours​

100-hour grease points​

Every 250 hours​

Synchronized Feed System (SFS)​

Every 300 hours​

300 hour grease points​

Transmission oil level​

Final drive oil level​

Lower unloading gearbox – Oil level​

Rotor gearbox oil level​

Right-hand rotor gearbox​

Synchronized Feed System (SFS) gearbox oil level​

Integrated chopper gearbox​

Tailings gearbox​

Feeder header drive gearbox – level​

ActiveTrac 4-Roller Track​

After the first 600 hours​

Engine - valve clearance check – (Cursor 13 only)​

Every 600 hours​

Cab fresh air filter​

Cab recirculation filter​

Air cleaner element​

Every 600 hours or yearly​

Engine fuel filter​

Fuel prefilter/water separator​

Battery Box​

Every 750 hours​

Lower unloading gearbox – Change oil​

Final Drive Oil - Change – Change oil​

Transmission – Change oil​

Tailings gearbox – Change oil​

Feeder header drive gearbox – Change oil​

Feeder header drive slip-clutch – Change oil​

Right-hand rotor gearbox – Change oil​

Synchronized Feed System (SFS) - Change oil​

Cooler fan gearbox – Change oil​

Integrated chopper drive gearbox – Change oil​

Power Take-Off (PTO) – Change oil​

Rotor drive gearbox – Change oil​

Hydraulic oil reservoir - Change oil​

Hood mounted chopper gearbox – Change oil​

Variable Powered Rear Axle (VPRA) – Central gearbox oil change​

Variable Powered Rear Axle (VPRA) - Change oil​

Every 750 hours or every 2 years​

Engine oil and filter – Cursor 16​

Engine oil and filter – Cursor 13​

Fuel tank breather​

Fuel tank strainer​

Every 1200 hours​

Alternator belt – (Cursor 13)​

Every 1200 hours or two years​

Air cleaner safety element​

Air conditioning filter drier​

Every 1500 hours​

ActiveTrac 4-Roller Track – Oil change​

Alternator belt – (Cursor 16)​

Every 1800 hours​

Engine crankcase breather filter​

Engine crankcase breather filter - (Cursor 16 Only)​

Every 2400 hours​

Engine valve adjustment​

Every 4000 hours or four years​

Engine coolant replacement​

As required maintenance​

Machine cleaning​

Machine cleaning​

GrainCam™ – Cleaning​

Windshield washer reservoir​

Fuel system bleeding​

Hydraulic fluid – filling​

Roof lights​

Steering toe-in - Adjust​

Rear axle steering cylinder - Adjust​

Fuse and relay locations​

Fuse and relay locations​

Storage​

Post-season​

Residue spreader - Post season cleaning​

Preseason service​

TROUBLESHOOTING

Alarm(s)​

Alarm description​

Display alarms​

GrainCam™ – Alarms​

SPECIFICATIONS

Tire care​

Wheel removal​

Single drive wheel – Mounting​

Floatation drive wheel – Mounting​

Dual drive wheel – Mounting​

Temporary transport – Single wheel​

ActiveTrac 4-Roller Track​

Steering axle – Overview​

Steering wheel​

Approved tires and tracks​

NO TITLE

NO TITLE​

NO TITLE

NO TITLE​

NO TITLE

AF9 Tire pressure​

NO TITLE​

Tire inflation​

Tire inflation pressures - AF9 - 20 kph (12mph)​

NO TITLE

NO TITLE​

NO TITLE

NO TITLE​

NO TITLE

NO TITLE​

NO TITLE

NO TITLE​

NO TITLE

NO TITLE​

Tire inflation pressures - AF9 - 25 kph (16mph)​

NO TITLE

NO TITLE​

NO TITLE

NO TITLE​

NO TITLE

NO TITLE​

NO TITLE

NO TITLE​

NO TITLE

NO TITLE​

Tire inflation pressures - AF9 - 30 kph (19mph)​

NO TITLE

NO TITLE​

NO TITLE

NO TITLE​

NO TITLE

NO TITLE​

NO TITLE

NO TITLE​

NO TITLE

NO TITLE​

Tire inflation pressures - AF9 - 40 kph (25mph)​

NO TITLE

NO TITLE​

NO TITLE

NO TITLE​

NO TITLE

NO TITLE​

NO TITLE

NO TITLE​

NO TITLE

NO TITLE​

Tire inflation pressures - AF9 - 20 kph (12mph)​

NO TITLE

NO TITLE​

NO TITLE

NO TITLE​

NO TITLE

NO TITLE​

NO TITLE

NO TITLE​

NO TITLE

NO TITLE​

Tire inflation pressures - AF9 - 25 kph (16mph)​

NO TITLE

NO TITLE​

NO TITLE

NO TITLE​

NO TITLE

NO TITLE​

NO TITLE

NO TITLE​

NO TITLE

NO TITLE​

Tire inflation pressures - AF9 - 30 kph (19mph)​

NO TITLE

NO TITLE​

NO TITLE

NO TITLE​

NO TITLE

NO TITLE​

NO TITLE

NO TITLE​

NO TITLE

NO TITLE​

Tire inflation pressures - AF9 - 40 kph (25mph)​

NO TITLE

NO TITLE​

NO TITLE

NO TITLE​

NO TITLE

NO TITLE​

NO TITLE

NO TITLE​

NO TITLE

AF10 Tire pressure​

NO TITLE​

Tire inflation pressures - AF10 - 20 kph (12mph)​

NO TITLE

NO TITLE​

NO TITLE

NO TITLE​

NO TITLE

NO TITLE​

NO TITLE

NO TITLE​

NO TITLE

NO TITLE​

Tire inflation pressures - AF10 - 25 kph (16mph)​

NO TITLE

NO TITLE​

NO TITLE

NO TITLE​

NO TITLE

NO TITLE​

NO TITLE

NO TITLE​

NO TITLE

NO TITLE​

Tire inflation pressures - AF10 - 30 kph (19mph)​

NO TITLE

NO TITLE​

NO TITLE

NO TITLE​

NO TITLE

NO TITLE​

NO TITLE

NO TITLE​

NO TITLE

NO TITLE​

Tire inflation pressures - AF10 - 40 kph (25mph)​

NO TITLE

NO TITLE​

NO TITLE

NO TITLE​

NO TITLE

NO TITLE​

NO TITLE

NO TITLE​

NO TITLE

NO TITLE​

Tire inflation pressures - AF10 - 20 kph (12mph)​

NO TITLE

NO TITLE​

NO TITLE

NO TITLE​

NO TITLE

NO TITLE​

NO TITLE

NO TITLE​

NO TITLE

NO TITLE​

Tire inflation pressures - AF10 - 25 kph (16mph)​

NO TITLE

NO TITLE​

NO TITLE

NO TITLE​

NO TITLE

NO TITLE​

NO TITLE

NO TITLE​

NO TITLE

NO TITLE​

Tire inflation pressures - AF10 - 30 kph (19mph)​

NO TITLE

NO TITLE​

NO TITLE

NO TITLE​

NO TITLE

NO TITLE​

NO TITLE

NO TITLE​

NO TITLE

NO TITLE​

Tire inflation pressures - AF10 - 40 kph (25mph)​

NO TITLE

NO TITLE​

NO TITLE

NO TITLE​

NO TITLE

NO TITLE​

NO TITLE

NO TITLE​

NO TITLE

NO TITLE​

Machine dimensions​

Machine specifications​

ACCESSORIES

General information​

Feeding​

Threshing and separation​

Engine​

Clean grain, grain tank, and unloading​

Cab​

Residue handling​

Miscellaneous​

FORMS AND DECLARATIONS

Delivery report - Owner Copy​

Delivery report - Dealer Copy​

Service record - 1st 50 Hour, Customer Copy​

Service record - 1st 50 Hour, Dealer Copy​

ActiveTrac 4-Roller Track – Workshop data sheet​

ActiveTrac 4-Roller Track – Difficult to align - Report​

FD2/D2 Header​