Bomag Single Drum Rollers-5 Service Training Electrics

[Hubert Veidt]

Download this document, you need 500 Gallons

Bomag Single Drum Rollers-5 Service Training Electrics
Size: 4.20 MB
Format: PDF
Language: English
Brand: Bomag
Type of Machine: Single Drum Roller
Type of Manual: Service Training Electrics
Model: Bomag Single Drum Rollers
BW145D BW145DH BW145PDH BW177D BW177DH BW177BVC
BW197DH BW211D BW211PD BW211DH BW211PDH
BW212D BW212PD BW212DH BW213D BW212DH BW212PDH BW212BVC
BW214D B216D BW216PD BW216DH BW216PDH
BW219D BW219PD BW219DH BW219PDH BW219BVC
BW226DH BW226PDH BW226BVC BW226DI BW226RV
Publication Date: 2019
Number of Pages: 165 Pages

Contents:
1 Confirmation of changes
1.1 Document
1.2 Software
Displayed monitoring activities with fault reactions
2 Known faults
3 The diagnostics system
3.1 Display functions
3.2 General facts and operation
3.3 Querying firmware version
4 Fault log — displaying and deleting
4.1 Showing logged faults
4.2 Deleting engine control unit fault log
5 Settings and queries
5.1 Setting the machine type
5.2 Driving against the closed brake
5.3 Automatic detection of surge currents in travel
5.4 Display of coil current on the travel pump System (information code 1090)
5.5 Display of pressure on the travel pump
5.6 Display of pressure on the vibration pump
5.7 Ports BW145/177/197 DH/PDH/BVC
5.8 Ports BW145/177 D
5.9 Ports BW211-226 DH/PDH/BVC/DI/RC
5.10 Activating / deactivating the pressure override
5.11 Calibrating the speed detection (calibration of wheel diameter)
5.12 Show pulses per 10 metres
5.13 Showing the speed of the rotary speed sensor in m/min
5.14 Showing the speed of the rotary speed sensor in km/h
(as of software version V406)
5.15 Showing the pulses of the rotary speed sensor
5.16 Showing the direction signal of the rotary speed sensor
5.17 Showing the travel speed range
5.18 Setting the vibration frequency
5.19 Activating/deactivating the cabin
5.20 Setting the serial number (information code 4019)
5.21 Activating/deactivating the measuring technology
5.22 Activating/deactivating the printer
5.23 Checking the position of the Vario exciter
5.24 Carrying out the acceleration transducer position test (information code 4071)
5.25 Activating ECONOMIZER