Ausa Taurulift T306H T307H Operation Manual

[Hyundai]

Download this document, you need 1050 Gallons

Ausa Taurulift T306H T307H Operation Manual
Size: 6.79 MB
Format: PDF
Language: English
Brand: Ausa
Type of Machine: Taurulift
Type of Manual: Operation Manual, Electric and Hydraulic Diagrams
Model: Ausa T306H T307H Taurulift
above chassis number 33268001
Number of Pages: 154 Pages

Contents:
1 General Information

1.1 How to identify your machine​

1.1.1 Machine directions​

1.1.2 Warning plates and labels on the machine​

1.1.3 Symbols used on the machine​

1.2 How to identify the machine​

1.2.1 Model and type​

1.2.2 Manufacturer​

1.2.3 Identification plates​

1.2.4 Ec marking​

1.2.5 Frame number​

1.2.6 Engine serial number​

1.3 Acceptable use​

1.3.1 Acceptable use​

1.3.2 Unacceptable use​

1.3.3 Operator risks​

1.3.4 Applicable standards​

1.3.5 Safety devices​

1.4 General description​

1.4.1 Main parts​

1.4.2 Description of the main parts​

1.4.3 Optional accessories​

1.5 Technical data​

1.5.1 Diesel engine​

1.5.2 Transmission​

1.5.3 Steering​

1.5.4 Brakes​

1.5.5 Standard tyres​

1.5.6 Service temperature​

1.5.7 Hydraulic circuit​

1.5.8 Capacity/dimensions​

1.5.9 Forks​

1.5.10 Electrical equipment​

1.5.11 Vibration and noise levels​

1.5.12 Forklift measurements​

1.6 Duration of use​

1.7 Accessories included​

1.7.1 Documentation provided​

2 Special safety messages

2.1 General information​

2.2 Prerequisites for personnel​

2.2.1 Prerequisites for operators​

2.2.2 Prerequisites for personnel in charge of maintenance​

2.2.3 Work and maintenance clothing​

2.2.4 Personal protection equipment​

2.3 Safety standards​

2.3.1 Working area​

2.3.2 Prior preparation​

2.3.3 During work and maintenance​

2.3.4 Parking the forklift and stopping the engine​

2.4 Safety devices​

2.5 Overload system​

3 Operating instructions

3.1 Before entering the machine​

3.2 Accessing the machine​

3.2.1 Accessing the cab​

3.2.1.1 Exiting the cab in an emergency situation (if fitted)​

3.2.2 Adjusting the seat​

3.2.3 Adjusting the seat belt​

3.2.4 Adjusting the rear view mirrors​

3.2.5 Use of the courtesy light (if fitted)​

3.3 Control panel​

3.3.1 Controls​

3.3.2 Engine controls​

3.3.2.1 Starter switch​

3.3.2.2 Forward/reverse selector​

3.3.2.3 Back-up alarm and speed selector​

3.3.2.4 Brakes​

3.3.2.5 Throttle​

3.3.2.6 Turning system​

3.3.2.7 Road - job site switch​

3.3.2.8 Auxiliary driving controls​

3.3.2.8.1 Rotating beacon​

3.3.2.8.2 Hazard warning lights (if fitted)​

3.3.2.8.3 Job lights (if fitted)​

3.3.2.8.4 Continuous and high flow switch (if fitted)​

3.3.2.8.5 Fan speed regulator (if fitted)​

3.3.2.8.6 Hot air temperature regulator (if fitted)​

3.3.2.8.7 Air conditioning (if fitted)​

3.3.3 Gauges and indicators​

3.3.3.1 Gauges​

3.3.3.2 Indicators​

3.3.4 Joystick​

3.3.4.1 Selection of movements​

3.3.4.1.1 Standard machine​

3.3.4.1.2 Inverse controls (optional)​

3.3.4.2 Emergency stop​

3.3.4.2.1 Deactivation of the overload system​

3.3.4.3 lifting/lowering of the extending arm​

3.3.4.4 Forward/back tilt of the fork carriage​

3.3.4.4.1 Standard machine​

3.3.4.4.2 Inverse controls (optional)​

3.3.4.5 Extension/retraction of the extending arm​

3.3.4.5.1 Standard machine​

3.3.4.5.2 Inverse controls (optional)​

3.3.4.6 Auxiliaries hydraulic take-off (if fitted)​

3.3.4.6.1 4th valve​

3.3.4.6.2 5th valve (if fitted)​

3.3.4.7 Attachment of tools​

3.4 Start-up​

3.4.1 Before starting the engine​

3.4.1.1 Machine start-up check list​

3.4.2 Start-up​

3.4.3 Start the engine using an external source​

3.4.4 Start up at low temperatures​

3.4.5 Disconnecting the battery​

3.4.6 Start-up of the machine​

3.4.7 Parking the forklift and cutting the engine​

3.5 Use of the forklift​

3.5.1 Machine nominal load​

3.5.1.1 Load Centre (fig. 1)​

3.5.1.2 Load Capacity​

3.5.2 Use of the load chart​

3.5.2.1 Load charts (except USA and Australia)​

3.5.2.2 Load charts (USA market)​

3.5.2.3 Load charts (Australian market)​

3.5.3 Overload system​

3.5.3.1 Overload system calibration procedure.​

3.5.3.1.1 Standard machines​

3.5.3.1.2 Standard for Australian market (optional)​

3.5.3.2 Usage​

3.5.3.2.1 Standard machines​

3.5.3.2.2 Standard for Australian market (optional)​

3.5.4 Handling loads​

3.5.4.1 Adjustment of forks​

3.5.4.2 Working phases​

3.5.5 Replacement of tools​

3.5.6 Transporting towed loads​

3.6 Transporting the machine​

3.6.1 Towing a damaged machine​

3.6.2 Transfer by road and jobs​

3.6.3 Loading the machine with a crane​

3.6.4 Transport on another vehicle​

3.6.5 Parking and non-operational machines​

3.6.5.1 Short stops​

3.6.5.2 Extended stops​

3.6.6 Cleaning and washing the machine​

3.6.6.1 Cleaning instructions​

3.6.6.2 Washing the machine​

3.6.7 Elimination​

3.6.7.1 Elimination of batteries​

4 Periodic maintenance operations

4.1 Lubricants, Safety and Hygiene standards​

4.2 Scheduled maintenance​

4.2.1 Lubrication and maintenance chart​

4.3 Maintenance operations​

4.3.1 Disconnecting the battery​

4.3.2 Access to engine, cab and tank compartments​

4.3.3 Supply circuit​

4.3.4 Grease​

4.3.5 Tyres and wheels​

4.3.6 Brakes​

4.3.6.1 Brake oil level​

4.3.7 Engine air filter​

4.3.8 Cab air filter​

4.3.9 Engine coolant circuit​

4.3.10 Tank oil level​

4.3.10.1 Replacing hydraulic fluid​

4.3.10.2 Suction oil filter​

4.3.11 Replacement of the hydrostatic transmission filter element​

4.3.11.1 Hydrostatic transmission filter​

4.3.11.2 Regulation of the pressure regulation valves in the hydraulic circuit (fig. 1, 2)​

4.3.11.3 Hydraulic hoses​

4.3.12 Transfer box and differential oil level​

4.3.12.1 Front and rear differential​

4.3.12.2 Transfer box​

4.3.13 Reduction gear oil level (front and rear)​

4.3.14 Re-adjustment of the longitudinal axis of the wheels​

4.3.15 Regulation of clearance for the arm section guides​

4.3.16 Checking safety devices​

4.3.17 Engine oil​

4.3.17.1 Engine oil level​

4.3.17.2 Changing the oil and the oil filter​

4.3.18 Alternator belt​

4.4 Electric installation​

4.4.1 Battery​

4.4.2 Fuses - relays​

4.4.3 12 v supply lamps​

4.5 Liquids and lubricants​

4.5.1 Refuelling​

4.5.2 Product details​

4.5.2.1 Engine oil​

4.5.2.2 Lubricants, oils and filter cartridges​

4.5.2.3 Fuel​

4.5.2.4 Greases​

4.5.2.5 Brakes & Inching​

5 Diagrams
and charts

5.1 Screw torques​

5.2 Forklift actuation hydraulic diagram​

5.2.1 Standard machines and Inverse controls machines (optional)​

5.2.2 Continuous and high flow machines​

5.3 Extending arm hydraulic diagram​

5.4 Transmission hydraulic diagram​

5.4.1 T306H 2 speeds​

5.4.2 T306H / T307H 1 speed​

5.5 Wiring diagram​

5.6 Identification of failures in hydrostatic transmissions​

6 Ec certificate of conformity