Atlas Crawler Excavator TC3306 Operators Manual 6134262

[Momed80]

Download this document, you need 500 Gallons

Atlas Crawler Excavator TC3306 Operators Manual 6134262
Size: 9.15 MB
Format: PDF
Language: English
Brand: Atlas
Type of Machine: Crawler Excavator
Type of Manual: Operators Manual
Model: Atlas TC3306 Crawler Excavator
From Vehicle ID No.: 331 RB 31151
Part Number: 6134262
Publication Date: 2009
Number of Pages: 134 Pages

Contents:
1 Table of contents
2 Introduction
2.1 About these operating instructions
2.1.1 Requirements of staff
2.2 Safety warning system
2.3 Information about the notes in these operating instructions
2.4 Intended use
2.5 Use other than intended
2.6 Warranty
2.7 Ordering spare parts
3 Safety
3.1 General safety
3.1.1 Safety warning system
3.1.2 Danger classification
3.1.3 Structure of safety warning information
3.1.4 Description of symbols and danger illustrations
3.1.5 Safety signs and information signs
3.1.6 Safety signs and information signs – Maintenance and replacement
3.2 Personal safety
3.2.1 Personal protective equipment
3.3 Workspace safety
3.3.1 General guidelines for workspaces - Safe working methods
3.3.2 Parking the excavator and securing it to prevent unauthorised use
3.4 General safety notes
3.5 Safety equipment
3.6 Hazard zone
3.7 Persons inside the hazard zone
3.8 Stability on sloping ground
3.9 Driving and work operation
3.9.1 Driving
3.9.2 Work operation
3.10 Guides
3.11 Danger due to items dropping down
3.12 Working in the hazard zone of overhead lines and underground lines
3.13 Working in confined spaces
3.14 Changing attachments, maintenance and servicing
3.15 Recovering, loading and transport
3.16 Fire protection
3.17 Fuel
3.18 Hydraulic hoses and lines
4 Initial installation and settings
4.1 Initial briefing
4.1.1 Handing over the machine, briefing the operator
5 Description of the excavator
5.1 Overview of assemblies
5.2 Work attachments
5.3 Display and control devices
5.3.1 Inside the cab
5.3.2 Outside the cab
5.4 Fuses
5.4.1 Fuse allocation
5.5 Type plates
5.5.1 Excavator
5.5.2 Engine
6 Inspection
6.1 Inspection intervals
6.2 Inspection material
6.2.1 Fuels, lubricants and coolants and filling quantities
6.3 Service schedule and inspection plan
6.3.1 Initial inspection
6.3.2 Inspection plan
7 Operation
7.1 Before operation
7.1.1 Opening and closing
7.1.2 Battery isolator switch
7.1.3 Cab door
7.1.4 Side window
7.1.5 Windshield
7.1.6 Ignition lock
7.1.7 Adjusting the seat
7.1.8 Safety belt
7.1.9 Seat heating
7.1.10 Sunblind
7.1.11 Lighting
7.1.12 Windscreen washer
7.1.13 Heating and air conditioning system
7.1.14 Setting the nozzles
7.2 Operation
7.2.1 Checks to be carried out prior to starting the engine
7.2.2 Pilot control
7.2.3 Ignition lock
7.2.4 Test run
7.2.5 Starting and switching off the engine
7.2.6 Before operation
7.2.7 Driving the excavator
7.2.8 Starting up
7.2.9 Stopping/parking
7.2.10 Driving on public roads
7.2.11 Working with the excavator
7.2.12 Changing the work attachments
8 Transport
8.1 Loading the excavator
8.2 Unloading the excavator
8.3 Lifting the excavator
8.4 Recovering the excavator
9 Maintenance
9.1 Cleaning the excavator
9.1.1 Dry cleaning with compressed air
9.1.2 Cleaning with water and cleaning agents
9.1.3 Cleaning with a high-pressure washer
9.1.4 Cleaning the outside of the engine
9.1.5 Cleaning the combination cooler
9.1.6 Maintenance and replacement of safety signs
9.2 Lubrication
9.2.1 Excavator lubricating points
9.2.2 Lubricating points on the work attachment
9.2.3 Centralised lubricating system, electric
9.2.4 Filling up the centralised lubricating system
9.3 Maintenance and inspection tasks
9.3.1 Engine maintenance
9.3.2 Maintaining the cooling system
9.3.3 Maintaining the air filter system
9.3.4 Maintaining the fuel system
9.3.5 V-belt
9.3.6 Draining water off the charge cooler
9.3.7 Maintaining the transmission
9.3.8 Chassis
9.3.9 Maintenance of the hydraulic system
9.3.10 Windshield washer
9.3.11 Maintaining the electrical system
9.3.12 Maintaining the heating and air conditioning system
9.4 Shutdown
9.4.1 Preserving the excavator
10 Specifications
10.1 Weights and performance data
10.2 Dimensions
10.3 Fuels, lubricants and coolants and filling quantities
10.3.1 Specification for fuels, lubricants and coolants
10.3.2 Filling quantities
11 Rectifying faults
11.1 Finding and rectifying faults
11.1.1 Malfunctions
11.2 Malfunctions and unusual operating states
12 Index