Truck

Driver
Joined
Likes
511
Gallons
1,815,727

AGCO EDT (Electronic Diagnostic Tool) v1.75 [03.2016] Full + Instruction

#1
Download this document, you need 2000 Gallons
Download Now
AGCO EDT (Electronic Diagnostic Tool) v1.75 [03.2016] Full + Instruction
Size: 6,8Gb
Language : Multilingual (Russian present)
Version : 1.75.16057.888
Type: AGCO EDT (Electronic Diagnostic Tool)
Year / Release Date : 03.2016
System Requirements : Windows XP / 7/8 / 8.1 / 10 x64-x86
Medicine + Instruction: Present
Pass: AGCOEDT175032016


Description : EDT
- Program diagnostics agricultural machinery AGCO
- Challenger, Massey Ferguson, RoGator , SpraCoup etc.
For the diagnosis requires AGCO CANUSB adapter without a program can be used as a base fault code data, and ways to solve them.
Together with the program set EDTWinEEM3s for diagnostics of engines and other old machinery AGCO.

There is equipment for all regions
- North America, Asia, Africa, South America, Eastern Europe, etc.

INSTRUCTION:

My recommendations according to experience with this software:

1. If possible, it is better to install it on a clean laptop.

2. Before you install the files
make sure you have turned internet connection off (I recommend to switch off LAN and WLAN adapters in "Change adapter settings" menu).

3. First install EDT_175_FULL_A_175.16071.701.exe,
then EDT_175_FULL_B_175.16071.701.exe,
then EDT_Fault_Trees_13_Full.exe and after that EDT_3rd_Party_Components_6_Full.exe.

4. After installation is complete, do not restart, extract files from license.rar and first run license32.reg
or license64.reg depending on your Windows version. Add it to the registry (it will ask for it).

5. After that run wheretoput.exe to find out where to put (captain obvious)) the license.lic file
(it is C:\ProgramData\AGCO Corporation\EDT).

6. Make sure again the internet connection is off.

7. Run the EDT link on the desktop.

8. It will say that it cannot connect to AGCO licensing server, and the license will expire kinda on 06.05.2017, press okay,
then it will ask to start EDT without CANBOX adapter, you press yes,
then it will ask for the region you are in, you can select any region you want, they have different equipment also (different markets).
After that it will show what's new with the version.

9. Now you are a happy owner of full EDT and capable of flashing firmwares, perform diagnostics and read and fix fault codes.
You can also make EDT lite version without flashing fucntion.

10. If you have a problem with installation, write me and I will help you!

EDT help files
Updating the software
Voucher Codes
Timeout and license notification
Updating a subscription license
VCI CAN Bus Interface (CAN Box)
Version information
Bottom of screen (footer) icons
Changing the language of the application
Selecting or changing the units of measure
Top of screen (header) icons
Changing the language of the help function
Utilities
Taking a screenshot
Sending system information
Viewing release notes
Using the task manager
Sending feeback
Viewing upload history
Keyboard
Changing the region
Hide EDT
Checking the network settings
Using Remote Help (BOMGAR)
EDT Lite
Reinstalling hardware drivers
Selecting a machine
Machine help files
Diagnostic connection information
Navigation icons (after machine selected)
Network scan and status information
Diagnostics by machine function
Graphic diagnostics
Diagnostic summary
Diagnostic reporting
Uploading the diagnostic reporting signal(s)
Uploading all diagnostic reporting signals
Calibrations
Configurations
Flashing software
Diagnostic trouble codes (DTC)
Fault tree index
Diagnostic fault tree
Stored fault codes
Doing a CAN trace




Release Notes - 3/23/2016 (Update 0175)

0175 (3/23/2016)

0173 (2/1/2016)

0172 (12/15/2015)

0170 (10/19/2015)

0167 (7/15/2015)

0165 (6/29/2015)

0161 (3/18/2015)

0160 (2/5/2015)

0158 (1/16/2015)

0154 (11/25/2014)

0153 (10/31/2014)

0152 (9/12/2014)

0151 (8/27/2014)

0149 (8/14/2014)

0148 (8/5/2014)

0147 (7/3/2014)

0145 (6/10/2014)

0144 (5/30/2014)

0143 (5/9/2014)

0142 (4/17/2014)

0141 (4/11/2014)

0140 (3/26/2014)

0139 (3/18/2014)

0138 (2/11/2014)

0137 (1/10/2014)

0136 (12/20/2013)

0135 (11/27/2013)

0134 (11/22/2013)

0132 (10/25/2013)

0131 (10/4/2013)

0130 (9/27/2013)

0129 (9/13/2013)

0128 (8/30/2013)

0127 (8/21/2013)

0126 (8/16/2013)

0125 (8/2/2013)

0124 (7/19/2013)

0123 (7/8/2013)

0122 (6/21/2013)

0121 (6/7/2013)

0120 (5/24/2013)

0119 (5/10/2013)

0118 (4/26/2013)

0117 (4/12/2013)

0116 (3/29/2013)

0115 (3/15/2013)

0114 (3/1/2013)

0113 (2/15/2013)

0112 (2/1/2013)

0111 (1/4/2013)

0110 (12/14/2012)

0109 (11/30/2012)

0107 (11/16/2012)

0106 (11/2/2012)

0105 (10/19/2012)

0104 (10/5/2012)

0103 (9/21/2012)

0102 (9/7/2012)

0101 (8/24/2012)

0100 (8/15/2012)

0099 (8/10/2012)

0098 (7/27/2012)

0096 (7/13/2012)

0095 (6/29/2012)

0094 (6/15/2012)

0093 (6/1/2012)

0092 (5/18/2012)

0091 (5/4/2012)

0090 (4/26/2012)

0089 (4/20/2012)

0088 (4/6/2012)

0087 (3/23/2012)

0086 (3/14/2012)

0085 (3/9/2012)

0084 (2/24/2012)

0083 (2/10/2012)

0082 (1/27/2012)

0080 (1/13/2012)

0079 (12/23/2011)

0078 (12/13/2011)

0077 (12/9/2011)

0076 (11/29/2011)

0075 (11/25/2011)

0074 (11/11/2011)

0073 (10/28/2011)

0072 (10/14/2011)

0071 (9/30/2011)

0069 (9/2/2011)

0068 (8/19/2011)

0067 (7/29/2011)

0065 (7/1/2011)

0064 (6/22/2011)

0063 (6/13/2011)

0062 (6/10/2011)

0060 (5/9/2011)

0059 (4/21/2011)

0058 (4/12/2011)

0057 (4/4/2011)

0056 (3/25/2011)

0055 (3/22/2011)

0054 (3/9/2011)

0053 (2/21/2011)

0052 (2/14/2011)

0049 (12/23/2010)

0048 (11/24/2010)

0046 (9/30/2010)

0044 (9/2/2010)

0043 (8/14/2010)

0041 (6/23/2010)

0040 (6/11/2010)

0039 (6/3/2010)

0038 (5/15/2010)

0037 (4/26/2010)

0036 (3/18/2010)

0033 (2/26/2010)

0032 (2/11/2010)

0030 (1/21/2010)

0027 (11/17/2009)

0025 (9/30/2009)

0024 (9/18/2009)

0023 (9/9/2009)

0022 (8/26/2009)

0021 (8/21/2009)

0020 (8/20/2009)

0018 (7/8/2009)

0016 (6/12/2009)

0015 (6/9/2009)

0014 (6/3/2009)

0012 (5/6/2009)

0010 (4/20/2009)

0009 (4/7/2009)

0007 (3/25/2009)

0006 (2/11/2009)

0004 (2/9/2009)

0001 (1/12/2009)

Release Notes - 3/23/2016 (Update 0175)

EDT NOTES:

EDT Version: 1.75.16057.888


--------------------------------------------------------------------------------

CONTENT UPDATES - Part 1

Vehicles Affected:

Massey Ferguson: 2700e
General:

Security access to non-AGCO machines: EDT access to the 2700 vehicle (engine) is not allowed if the Vehicle Name has been set to anything other than "AGCO". If the vehicle name has not been set, the ECU is considered a spare and software flash is allowed. When the Vehicle Name = "AGCO" full access is allowed.
Show the Vehicle Name on the Engine Information graphic surface.
On the Glow Relay Test on the Diagnostic test page, turn off the Glow Plugs after 10 seconds or when leaving the page.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 2

Vehicles Affected:

Challenger: WR9860, WR9870
Massey Ferguson: WR9860, WR9870
General:

New Main Controller SW, resend remote engage command with button press if auto guide is already engaged.
New Engine SW, fixed issue with SCR system refill detection that was causing a fault code.
Updated Engine plug-in adds engine ECU replacement functionality.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 3

Vehicles Affected:

Laverda: AL4 Evolution
Diagnostics:

Release v2.0.
Engine Plug-In updated (Engine ECU Replacement Procedure implemented).

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 4

Vehicles Affected:

Sunflower: 9830
General:

Update Drill Software to 1.01.
Update C1000 Software to 3.2.0.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 5

Vehicles:.
Valtra: T-series, N-series, A-series
General:

Vehicle Version v3.11.
Updated plug-ins:
EEM4 v6.0, Supports engine activation.
LHLink v5.1, Network Scan updated and PVED software removed.
Diagnostic Surface:.

Damping potentiometer pictures updated on rear linkage page.
TwinTrac diagnostic page updated for digital power shuttle lever.
Fault Trees:.

General update.
SECU service codes updated.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 6

Vehicles Affected:

AGCO
Round Balers: 2846, 2856
Square Balers: 2140, 2150, 2160, 2170, 2190
Challenger
Round Balers: RB46C, RB56C, 2946, 2956
Square Balers: LB23B, LB24B, LB33B, LB34B, LB34BXD, LB44B, 2240, 2250, 2260, 2270, 2270XD, 2290
Fendt
Square Balers: 870, 990, 1270, 1290, 1290XD, 12130
Massey Ferguson
Round Balers: 2846, 2856, 2946, 2956
Square Balers: 2140, 2150, 2160, 2170, 2170XD, 2190, 2240, 2250, 2260, 2270, 2270XD, 2290
General:

Updated C1000 plug-in includes version 3.2.0. See C1000 release note for more information.
Updated C2100 software to version 3.2.0. See C2100 release notes for more information.
Updated Square Baler Controller software to version 3.80.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 7

Vehicles Affected:

Valtra: BE1035e
General:

New Chassis ECU SW, corrects the pressure parameter for the alarm of the charge pressure oil filter obstructed.
New Implement ECU SW, corrects open load detection for the implement engage solenoid.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 8

Vehicles Affected:

Massey Ferguson: MF9030
Valtra: BS3020H
General:

New Software Machine Available.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 9

Vehicles Affected:

Massey Ferguson: BX200
General:

New Release.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 10

Vehicles Affected:

Massey Ferguson: Global Serie MF 2700-4700-5700-6700
General:

Vehicle Version 3.0.
Fixed bug on Dashboard label codes export function.
Change text for inversion lever on the floor on connection step.
Added Coupling pump solenoid valve diagnostic in linkage diagnostic screen for 5700 and 6700 tractors.
Added Creeper solenoid valve and Creeper switch in Gearbox diagnostic screen for 5700 and 6700 tractors.
Added electronic speed selection PTO signals.
Removed Linkage code D=3.
New EEM4 content for Tier4i and Tier3 tractors:
Support Engine Activation.
New EEM4F content for Tier4F tractors:
Support Engine Activation.
Support new engine software v1.1.5.
Software:

New T4F Engine software for 4708, 4709 and 4710:
New emission strategy due to new requirements from authorities.
New Transmission software v2.09.0 for 5700 and 6700 tractors:
Bug fixing.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 11

Vehicles Affected:

Challenger: CH654B, CH658B
Fendt: 8370, 8400, 9470X
Massey Ferguson: 7280, 7282, 9280
Diagnostics:

Release v2.0.
Engine Plug-In updated (Engine ECU Replacement Procedure implemented).

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 12

Vehicles Affected:

Fendt: 8380P, 8380P AL, 8410P, 8410P AL, 9490X, 9490X AL
Massey Ferguson: 7380, 7380 AL, 7382, 7382 AL, 9380, 9380 AL
Diagnostics:

Release v2.0.
Engine Plug-In updated (Engine ECU Replacement Procedure implemented).
RDS Support implemented.
New EXT Software.
New Engine Software.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 13

Vehicles Affected:

Massey Ferguson: 4600 Series
General:

Improved engine activation procedures.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 14

Vehicles Affected:

Massey Ferguson: MF 8600 Series
Challenger: MT600D Series
AGCO: DTB Series
General:

Vehicle Version 8.40.
Fix Dashboard label codes reading on Windows XP.
New EEM4 content for Tier4i tractors:
Support Engine Activation.
Software:

New T4i engine software:
Fix engine instability in low coolant temperature (below 50°C).
New EXT software v1.13 for Tier4i and Tier2 tractors:
Compatibility with all Dyna-VT models.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 15

Vehicles Affected:

Challenger: CH652CA
Fendt: 5275CA, 5275CPLA, 6335CA, 6335CPLA
Laverda: M400A, M400LCA, M400LCIA, M410A, M410LCA
Massey Ferguson: 7360A, 7360PLA, 7370A, 7370PLA
Diagnostics:

Release v2.0.
Engine Plug-In updated (Engine ECU Replacement Procedure implemented).

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 16

Vehicles Affected:

Fendt: L-Series 2015: 5255L, 6275L
Fendt: C-Series 2015: 5275CA, 5275CPLA, 6335CA, 6335CPLA
Laverda: M300 Series 2015: M300A, M310A
Laverda: M400 Series 2015: M400A, M400LCA, M400LCIA, M410A, M410LCA
Massey Ferguson: ACTIVA S Series 2015: 7345S, 7347S
Massey Ferguson: BETA Series 2015: 7360A, 7360PLA, 7370A, 7370PLA
Diagnostics:

Release v2.0.
Engine Plug-In updated (Engine ECU Replacement Procedure implemented).
New EXT Software.
New Sauer-Danfoss Software.
New Engine Software.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 17

Vehicles Affected:

Challenger: CH644
Fendt: 5185E, 5220E, 5225E
Laverda: M180, M200
Massey Ferguson: 7244, 7340, 7344
Diagnostics:

Release v2.0.
New models added.
Engine Plug-In updated (Engine ECU Replacement Procedure implemented) New engine software.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 18

Vehicles Affected:

Challenger: CH645C, CH647C

Fendt: 5255L, 6275L
Laverda: M300, M310
Massey Ferguson: 7345S, 7347S
Diagnostics:

Release v2.0.
Engine Plug-In updated (Engine ECU Replacement Procedure implemented).

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 19

Vehicles Affected:

Challenger: CH648C, CH652C
Fendt: 5275C, 5275CPL, 6335C, 6335CPL
Laverda: M400, M400LC, M400LCI, M410, M410LC
Massey Ferguson: 7360, 7360PL, 7370, 7370PL
Diagnostics:

Release v2.0.
Engine Plug-In updated (Engine ECU Replacement Procedure implemented).

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 20

Vehicles Affected:

Challenger: MT 700E, MT 800E, MT 900E
General:

Vehicle Version 2.14.
Updated EEM4F_Diagnostics plugin to version 006.00_2016.02.05_125109.
Updated Engine files to version 1.1.5 Rev 0.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 21

Vehicles Affected:

Challenger: 520C, 530C, 540C, 550C, 560C
Fendt: 9390R, 9450R, 9480R
Massey Ferguson: 9520, 9530, 9540, 9550, 9560
General:

Hydraulic Cleaning Fan Speed Monitoring and Auto Adjust.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 22

Vehicles Affected:

AGCO: 8100, 8200, 8300, 8500, 8700, 8800 Planters
Challenger: 8100, 8200, 8300, 8500, 8700, 8800 Planters
Massey Ferguson: 8100, 8200, 8300, 8500, 8700, 8800 Planters
White: 8100, 8200, 8300, 8500, 8700, 8800 Planters
General:

Updated C3000 software to 3.17.408.
Updated C1000 software to 3.2.0.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 23

Vehicles Affected:

Rogator: RG 900, RG 1100, RG 1300
Challenger: RG 900, RG 1100, RG 1300
General:

Vehicle Version 1.29.
Updated plug in to NoracUC5/005.001_2016.01.26_155508.xml has been updated to now show a red X at the network scan when not detected. Norac UC5 software has been updated to 5.0.0.0 from 4.8.1.1 which bring various improvements in stability along with new options. The icon at graphical diagnostics has been changed to an ISO image.
Updated EEM4F_Diagnostics plugin to version 006.000_2016.02.05_125109.xml.
Corrected PVED plugin option for SpoolCorrection parameter 748. Now set to True, was False. This caused problems with default factory settings not setting 748 correctly.
Updated Engine files to version 1.1.5 Rev 0.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 24

Vehicles Affected:

Challenger: RG300 Series
General:

Initial release: vehicle version 1.0.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 25

Vehicles Affected:

Challenger: RG600
General:

Vehicle version 3.5.
Updated Plug-ins:
AGCO POWER TIER4 Final v6.
Norac UC5 v5.1.
Configuration:

Sprayer ECU: added "Spray Pump Pressure Sensor Type" (for all models before MY2015).
Software:

Update Engine Software (Tier4F) RG655C (1.1.5 Rev.1 837093410_1.hex).
Update Engine Software (Tier4F) RG645C (1.1.5 Rev.1 837093411_1.hex).
Update Engine Software (Tier4F) RG635C (1.1.5 Rev.3 837093412_3.hex).

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 26

Vehicles Affected:

Challenger: RG600D Series
General:

Vehicle version 1.1.
Updated Plugins:
AGCO Power Tier4 Final Diagnostics v6.0.
Norac UC5 v5.1.
Configuration:

Added option "ECO Fill" by Sprayer ECU.
Added option "Worklight Optiflow" by Sprayer ECU.
Software:

Update Sprayer ECU (version AGCO_RG600G-I_01.01.00.zip).
Update Chassis ECU (version AGCO_RG600G-C_01.00.01.zip).
Update Central Electric Unit (version ZEL_01.00.01.zip).
Update Engine ECU 635D (version 1.1.5 Rev.2 837093409_2.hex).
Update Engine ECU 645D (version 1.1.5 Rev.2 837093408_2.hex).
Update Engine ECU 655D (version 1.1.5 Rev.2 837093407_2.hex).

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 27

Vehicles Affected:

Challenger: RG700, RG700B
RoGator: RG700, RG700B
General:

Vehicle version 3.8.
Norac plugin updated to NoracUC5/005.001_2016.01.26_155508.xml, This changes the graphical diagnostics icon. Also changed to now show a red X at the network scan when not detected. Norac UC5 software has been updated to 5.0.0.0 from 4.8.1.1 which bring various improvements in stability along with new options.
EEM4 T4F plugin updated to EEM4F_Diagnostics/006.000_2016.02.05_125109.xml, This includes the engine activation option.
Corrected PVED plugin option for SpoolCorrection parameter 748. Now set to True, was False. This caused problems with default factory settings not setting 748 correctly.
Updated Engine files to version 1.1.5 Rev 0.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 28

Vehicles Affected:

Valtra: S3 and S4 Series
General:

Vehicle Version 6.50.
Fix Dashboard label codes reading on Windows XP.
New EEM4 content for Tier4i tractors:
Support Engine Activation.
New EEM4F content for Tier4F tractors:
Support Engine Activation.
Support new engine software v1.1.5.
Software:

New Dashboard DCC3 software v2.2.0 only for monochrome terminal tractors:
Fix label code AA number.
New T4F engine software:
New emission strategy due to new requirements from authorities.
New T4i engine software:
Fix engine instability in low coolant temperature (below 50°C).
New EXT software v1.13 for S3 and S4 tractors:
Support Quick steering diagnostic function.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 29

Vehicles Affected:

Gleaner: S96, S97, S98
General:

Production software release for EXT(1.03).
Production software release for YMM(1.0.0.0).
Production software release for Tyton Terminal (Label 21 - Ver290116).
Set VIN Number with authorization code.
Supports Engine Activation code.
Set Turn Signal flash rate at 1 HZ.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 30

Vehicles Affected:

Challenger: TG 8300
TerraGator: 7300, 8300, 8400
General:

Vehicle Version 1.38.
Updated plugin EEM4F_Diagnostics/006.000_2016.02.05_125109.xml, this includes the engine activation option.
Corrected PVED plugin option for SpoolCorrection parameter 748. Now set to True, was False. This caused problems with default factory settings not setting 748 correctly.
Updated Engine files to version 1.1.5 Rev 0.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 31

Vehicles Affected:

Challenger: TG 835
General:

Vehicle version 1.6.
Updated Plug-ins:
AGCO POWER TIER4 Final v6.
Software:

Update Engine Software (Tier4F) TG835 (1.1.5 Rev.1 837093413_1.hex).

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 32

Vehicles Affected:

Valtra: T4-series, N4-series
General:

Vehicle Version v1.31.
Ignition switch picture changed on Software Flash, ICL Hours and CAN ID pages.
TECU ID 221 set visible on Special Download tool.
Updated plug-ins:
EEM4f v6.0, support for new tests on software 1.1.5.
Diagnostic Surface:

Emergency brake lever fixed on Brakes diagnostic page.
Updated version of TECU diagnostic page added.
Visibility of Difflock diagnostic page fixed.
Calibrations:

Manual mode box fixed on Clutch Pedal and Power Shuttle Adjustments pages.
Names of calibrations updated.
Fault Trees:

General update.
Software:

Software packages:
AC24.5 (1.6.0.0): New software for TC1, TT, LCD.
AC25.5 (1.6.0.0): New software for TC1, TT, LCD.
AC26.5 AC27.5 (1.6.0.0): New software for TC1, LCD.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 33

Vehicles Affected:

Challenger: WR9770, WR9760, WR9740, WR9735, WR9725
Massey Ferguson: WR9770, WR9760, WR9740, WR9735, WR9725
General:

Updated engine plug-in adds engine ECU replacement functionality.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 34

Vehicles Affected:

Massey Ferguson: MF 5600 Series
General:

Vehicle Version 4.9.
Fix Dashboard label codes reading on Windows XP.
New EEM4 content:
Support Engine Activation.
Software:

New T4i engine software for 5611, 5612 et 5613 models:
Fix engine instability in low coolant temperature (below 50°C).

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 35

Vehicles Affected:

Massey Ferguson: MF 8700 Series
Challenger: MT600E Series
General:

Vehicle Version 2.90.
Fix Dashboard label codes reading on Windows XP.
Fix a potential error display at the end of Dashboard flash. This error was not perturbing the flash.
Add diagnostic Quick steering diagnostic function.
New EEM4F content for Tier4F tractors:
Support Engine Activation.
Support new engine software v1.1.5.
Software:

New EXT software v1.13 for Dyna-VT tractors:
Support Quick steering diagnostic function.
New IC1 software v3.1.0 for Dyna-VT tractors:
Management of new LCD hardware.
New T4F engine software:
New emission strategy due to new requirements from authorities.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 36

Vehicles Affected:

Massey Ferguson: MF 7700 Series
Challenger: MT500E Series
Iseki: i7700 Series
General:

Vehicle Version 2.0.
Fix a potential issue with Dyna-6 error codes detection on EDT.
Fix a potential error display at the end of Dashboard flash. This error was not perturbing the flash.
Fix a very small display bug in Hydraulic diagnostic screen.
Fix FingerTips number in Hydraulic diagnostic screen.
Fix in OFFLINE mode the joystick or FingerTips display in Front Hydraulic diagnostic screen.
Fix Dashboard label codes reading on Windows XP.
Add management of Jackson tractor production(USA) new 600 hour service interval.
Add diagnostic Quick steering diagnostic function.
Update of Fault Trees.
New EEM4F content for Tier4F tractors:
Support Engine Activation.
Support new engine software v1.1.5.
New EEM4 content for Tier3 tractors:
Support Engine Activation.
Software:

New EXT software v1.13 for Dyna-VT tractors:
Support Quick steering diagnostic function.
New IC1 software v3.1.0 for Dyna-VT tractors:
Management of new LCD hardware.
New IC1 software v3.4.0 for Dyna-6 and Dyna-4 tractors:
Management of new LCD hardware.
Compatibility with MF5700SL tractors.
New Warning lamp management.
Fix H3/H4 functions on Joystick.
New Transmission Dyna-6 Software v1.6.0:
Compatibility with MF5700SL models.
New Transmission Dyna-4 Software v1.3.0:
Compatibility with MF5700SL models.
Change timing detection on error 4.0.90.
Initial release of MF7700 Tier3 engine software.
New T4F engine software:
New emission strategy due to new requirements from authorities.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 37

Vehicles Affected:

Massey Ferguson: MF 5700SL Series
Iseki: i5700 Series
General:

Vehicle Version 2.0.
Initial release of MF5700SL and Iseki i5700 models.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 38

Vehicles Affected:

Massey Ferguson: MF 6600 Series
Challenger: MT400D Series
Iseki: i6600 Series
General:

Vehicle Version v8.9.
Fix Dashboard label codes reading on Windows XP.
New EEM4 content:
Support Engine Activation.
Software:

New EXT software v1.13 for Tier4i tractors:
Compatibility with all Dyna-VT models.
New T4i engine software:
Fix engine instability in low coolant temperature (below 50°C).

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 39

Vehicles Affected:

Massey Ferguson: MF 7600 Series
Challenger: MT500D Series
Iseki: i7600 Series
General:

Vehicle Version v8.9.
Fix Dashboard label codes reading on Windows XP.
New EEM4 content for Tier4i tractors:
Support Engine Activation.
Software:

New EXT software v1.13 for Tier4i tractors:
Compatibility with all Dyna-VT models.
New T4i engine software:
Fix engine instability in low coolant temperature (below 50°C).

--------------------------------------------------------------------------------

Release Notes - 2/1/2016 (Update 0173)

EDT NOTES:

EDT Version: 1.75.16018.749

EDT

Initial release to support Process Data.
Fixed an issue where the button for language selection in the EDT Help window was not displaying an image.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 1

Vehicles Affected:

Challenger: WR9860, WR9870
Massey Ferguson: WR9860, WR9870
General:

Main Controller version 2.1.3 fixes false DTC on non-Rear Wheel Steer machines.
C3000 version 3.17.408 included. For more information see Guidance release notes.
AG3000 version 4.1K12p8 included. For more information see Guidance release notes.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 2

Vehicles Affected:

Laverda: AL4 Evolution
Diagnostics:

Release v1.11.
Engine Plug-In updated.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 3

Vehicles Affected:

Valtra: T-series, N-series
General:

Vehicle Version 3.10.
Calibrations:

Auto Calibrations added for N2 and T2 models.
Software:

AC14.3(2.1.0.0) Direct TC1 software + parameters.
C1-C2 clutch change optimized.
AC14.33(2.1.0.0) Direct TC1 software + parameters.
C1-C2 clutch change optimized.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 4

Vehicles Affected:

AGCO
Round Balers: 2846, 2856
Square Balers: 2140, 2150, 2160, 2170, 2190
Challenger
Round Balers: RB46C, RB56C, 2946, 2956
Square Balers: LB23B, LB24B, LB33B, LB34B, LB34BXD, LB44B, 2240, 2250, 2260, 2270, 2270XD, 2290
Fendt
Square Balers: 870, 990, 1270, 1290, 1290XD, 12130
Massey Ferguson
Round Balers: 2846, 2856, 2946, 2956
Square Balers: 2140, 2150, 2160, 2170, 2170XD, 2190, 2240, 2250, 2260, 2270, 2270XD, 2290
General:

C1000 version 3.2.0 included. For more information see C1000 release notes.
C2100 version 3.2.0 included. For more information see C2100 release notes.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 5

Vehicles Affected:

Massey Ferguson: MF 2700-4700 Series
General:

Vehicle Version 2.90.
Change Auto7 picture in network scan, flash and configuration screen.
Software:

New Dashboard Software v1.51:
Management of DEF level.
Management of buzzer.
New Linkage software v1.14.6:
Fix issue with operator sensor, PTO and GSPTO display.
Fix issue with PTO 1000 and 6 splines shaft for US Market.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 6

Vehicles Affected:

Challenger: Legacy combines with AGCO Power Tier3 engines
Fendt: Legacy combines with AGCO Power Tier3 engines
Laverda: Legacy combines with AGCO Power Tier3 engines
Massey Ferguson: Legacy combines with AGCO Power Tier3 engines
Diagnostics:

Release v1.2.
Engine Plug-In updated.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 7

Vehicles Affected:

Challenger: CH654B, CH658B
Fendt: 8370, 8400, 9470X
Massey Ferguson: 7280, 7282, 9280
Diagnostics:

Release v1.15.
Engine Plug-In updated.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 8

Vehicles Affected:

FELLA: SM8312, SM9314
General:

New Fendt models Slicer 8312.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 9

Vehicles Affected:

Massey Ferguson: 4608, 4609, 4610

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 10

Vehicles Affected:

Massey Ferguson: 1700 Series
General:

Fix many and various bugs such as, engine hours, soot accumulation and other times showing in minutes instead of hours; several parameters showing with 6 or more places after the decimal; date and time shown as a string of numbers and not formatted as date and time; error message when successfully setting the IQA for a cylinder or indication that a different cylinder IQA was set; several issues with the exhaust system regeneration.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 11

Vehicles Affected:

Massey Ferguson: 4600 Series
General:

Updated the Teir4 Final engine files to version 1.1.5 Rev. 0. Updated the Teir4 Final plugin which improved some of the DTCs.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 12

Vehicles Affected:

Massey Ferguson: MF 8600 Series
Challenger: MT600D Series
AGCO: DTB Series
General:

Vehicle Version v8.30.
Software:

Back to previous Engine software for T4i tractors.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 13

Vehicles Affected:

Challenger: CH652CA
Fendt: 5275CA, 5275CPLA, 6335CA, 6335CPLA
Laverda: M400A, M400LCA, M400LCIA, M410A, M410LCA
Massey Ferguson: 7360A, 7360PLA, 7370A, 7370PLA
Diagnostics:

Vehicle diagnostic content release v1.20.
Engine Plug-In updated.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 14

Vehicles Affected:

Fendt: L-Series 2015: 5255L, 6275L
Fendt: C-Series 2015: 5275CA, 5275CPLA, 6335CA, 6335CPLA
Laverda: M300 Series 2015: M300A, M310A
Laverda: M400 Series 2015: M400A, M400LCA, M400LCIA, M410A, M410LCA
Massey Ferguson: ACTIVA S Series 2015: 7345S, 7347S
Massey Ferguson: BETA Series 2015: 7360A, 7360PLA, 7370A, 7370PLA
Diagnostics:

Release v1.9.
Engine Plug-In updated.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 15

Vehicles Affected:

Challenger: CH644
Fendt: 5220E
Laverda: M200
Massey Ferguson: 7244
Diagnostics:

Release v1.9.
Engine Plug-In updated

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 16

Vehicles Affected:

Challenger: CH645C, CH647C
Fendt: 5255L, 6275L
Laverda: M300, M310
Massey Ferguson: 7345S, 7347S
Diagnostics:

Release v1.11.
Engine Plug-In updated.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 17

Vehicles Affected:

Challenger: CH648C, CH652C
Fendt: 5275C, 5275CPL, 6335C, 6335CPL
Laverda: M400, M400LC, M400LCI, M410, M410LC
Massey Ferguson: 7360, 7360PL, 7370, 7370PL
Diagnostics:

Release v1.26.
Engine Plug-Ins updated.
Solved an issue with TECU flash.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 18

Vehicles Affected:

Challenger: MT700 C, MT800 C, MT900 C
General:

Vehicle Version 3.31.
Updated AG3000 firmware to 4.1K12 Jun,08,2015 p8.
Updated C3000 software to version 3.17.408.
Updated C1000 software to version 3.2.150929:
Includes UT 2.0 support
Updated engine diagnostics:
Includes additional engine tests.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 19

Vehicles Affected:

Challenger: MT 700D Series
General:

Vehicle Version 1.24.
Updated AG3000 firmware to 4.1K12 Jun,08,2015 p8.
Updated C3000 software to version 3.17.408.
Updated C1000 software to version 3.2.150929:
Includes UT 2.0 support.
Updated engine diagnostics:
Includes additional engine tests.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 20

Vehicles Affected:

Challenger: MT 700E, MT 800E, MT 900E
General:

Vehicle Version 2.11.
Updated AG3000 firmware to 4.1K12 Jun,08,2015 p8.
Updated C3000 software to version 3.17.408.
Updated C1000 software to version 3.2.150929:
Includes UT 2.0 support.
Updated engine diagnostics:
Includes additional engine tests.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 21

Vehicles Affected:

Challenger: 520C, 530C, 540C, 550C, 560C
Fendt: 9390R, 9450R, 9480R
Massey Ferguson: 9520, 9530, 9540, 9550, 9560
General:

Added Bosch Hyd for Header Height & Tilt - MY2016.
Ramped Activation of Master Valve.
9520 Cleaning Fan Speed, Max 1500 RPM.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 22

Vehicles Affected:

Rogator: RG 900, RG 1100, RG 1300
Challenger: RG 900, RG 1100, RG 1300
General:

Vehicle Version 1.23.
Added T4f models to EAME regions.
Updated AG3000 firmware to 4.1K12 Jun,08,2015 p8.
Updated C3000 software to version 3.17.408.
Updated engine diagnostics:
Includes additional engine tests.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 23

Vehicles Affected:

Challenger: RG600D Series
General:

Vehicle version 1.0.
Initial release.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 24

Vehicles Affected:

Challenger: RG700, RG700B
RoGator: RG700, RG700B
General:

Vehicle Version 3.3
Added AGCOMMAND diagnostics.
Updated AG3000 firmware to 4.1K12 Jun,08,2015 p8.
Updated C3000 software to version 3.17.408.
Updated engine diagnostics:
Includes additional engine tests.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 25

Vehicles Affected:

Valtra: S3 and S4 Series
General:

Vehicle Version 6.40.
Fix pneumatic brake pressure sensor in diagnostic screen.
Fix display of latest version available for DCC3 and Auto5 Linkage for S2 tractors.
Fix issue with maintenance hour modification with EDT on S3 tractors.
Software:

Back to previous Engine software for T4i tractors.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 26

Vehicles Affected:

Gleaner: S67, S77
General:

Upgrade C2100 v3.2.0.
Upgrade C3000 v3.17.408.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 27

Vehicles Affected:

Gleaner: S68, S78, S88
General:

Update C2100 v3.2.0.
Update C3000 v3.17.408.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 28

Vehicles Affected:

Challenger: TG 8300
TerraGator: 7300, 8300, 8400
General:

Vehicle Version 1.33.
Updated engine diagnostics:
Includes additional engine tests.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 29

Vehicles Affected:

Valtra: T4-series, N4-series
General:

Vehicle Version 1.28.
Diagnostic surface:

Diagnostic page for ISOBUS added.
4wd page set visible for AC24.
Minor bug fixing on CVT, 4wd, Difflock, PTO and Brakes diagnostic pages.
Updates on Quick Steering page.
Software:

EEM4f hex files 1.1.5 for all N4 and T4 models.
Calibration of urea level sensor improved.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 30

Vehicles Affected:

Challenger: WR9770, WR9760, WR9740, WR9735, WR9725
Massey Ferguson: WR9770, WR9760, WR9740, WR9735, WR9725
General:

C3000 version 3.17.408 included. For more information see Guidance release notes.
AG3000 version 4.1K12p8 included. For more information see Guidance release notes.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 31

Vehicles Affected:

Massey Ferguson: MF 5600 Series
General:

Vehicle Version 4.7.
Hide Cab suspension diagnostic that is not available on these models.
Software:

New DCC3 Software v3.0.0 for Dyna-6 tractors:
New inversion logic.
Back to previous Engine software for 5611, 5612 and 5613 tractors.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 32

Vehicles Affected:

Massey Ferguson: MF 8700 Series
Challenger: MT600E Series
General:

Vehicle Version 2.80.
Fix trailer brake PWM in Dyna-VT braking system diagnostic.
Add pictures of ECUs in table of constants reading.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 33

Vehicles Affected:

Massey Ferguson: MF 7700 Series
Challenger: MT500E Series
Iseki: i7700 Series
General:

Vehicle Version 1.80.
Fix trailer brake PWM in Dyna-VT braking system diagnostic.
Hide Auto5 TECU code C because it is useless.
Hide Cab suspension ECU in Long console.
Add pictures of ECUs in table of constants reading.
Add AGCOMMAND detection on CAN3 when tractor is long console.
Fix MT500E Tier4F engine diagnostic .
Software:

New TECU software v1.05.00:
Fix suspended front axle lock.
New Dashboard IC1 software v3.3.0 for Dyna-4 and Dyna-6 tractors:
Suppression of new inversion logic.
Management of new IC1 LCD hardware.
New Transmission Dyna-6 Software v1.4.0:
Compatibility between models".

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 34

Vehicles Affected:

Massey Ferguson: MF 6600 Series
Challenger: MT400D Series
Iseki: i6600 Series
General:

Vehicle Version 8.7.
Software:

New DCC3 Software v3.0.0 for Dyna-6 tractors:
New inversion logic.
Back to previous Engine software for T4i tractors.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 35

Vehicles Affected:

Massey Ferguson: MF 7600 Series
Challenger: MT500D Series
Iseki: i7600 Series
General:

Vehicle Version 8.7.
Software:

New DCC3 Software v3.0.0 for Dyna-6 tractors:
New inversion logic.
Back to previous Engine software for T4i tractors.

--------------------------------------------------------------------------------

Release Notes - 12/15/2015 (Update 0172)

EDT NOTES:

EDT Version: 1.74.15314.507

EDT

Fixed an issue where switching away from Network Scan or Network Summary locks up the EDT UI indefinitely.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 1

Vehicles Affected:

Massey Ferguson: 2700e
General:

Vehicle Version 1.13.
In model selection, the 2705E and 2706E models have been moved into the 2700E Series category.
In Network Scan, the Update available now works correctly instead of always reporting an update is needed.
VIN number display has been removed from the Engine Overview diagnostic page.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 2

Vehicles Affected:

Challenger: WR9840 (Tier4), WR9840 (LRC), WR9860 (Tier4), WR9860 (LRC), WR9870 (Tier4), WR9870 (LRC)
Massey Ferguson: WR9840 (Tier4), WR9840 (LRC), WR9860 (Tier4), WR9860 (LRC), WR9870 (Tier4), WR9870 (LRC)
General:

Vehicle Version 4.7.
Added RWS Diagnostics:
Added a rear wheel steer diagnostics page.
C1000 Software:
Fixed issue where the console reverts to imperial units after power cycle.
System now supports multiple C1000 revisions based on Model Year.
Graphics:
Changed Model selection graphics on steering type option to be more consitent.
Updated all RWS images to the RWS icon.
Vehicle Configuration Menu:
Dealers can now change certain parameters without an authorization code.
Main Controller Flash Script:
Updated to be more robust.
Parameter restore no longer depends on network scan, making it less likely to reset parameters.
Main Controller Software Scan:
Fixed issue where network scan sometimes misses part of the Main Cotroller version.
Updated Ground Drive Graphical Surface:
Added Sensor supply voltage and Throttle sensor voltage to the Propel Overview page of the Ground Drive Graphical surfaces.
Updated Main Controller SW:
New Main Controller SW for both MY 2015 and MY 2016 with increased 5300 Draper Header funtionality.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 3

Vehicles Affected:

Massey Ferguson: 3600 Series
Diagnostics:

Vehicle Version 3.15.
Engine Plug-In updated.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 4

Vehicles Affected:

Valtra: T-series, N-series, A-series
General:

Vehicle Version 3.9.
AGCOMMAND set visible for Hitech tractors.
Updated plug-ins:
AG3000 v5.2, bug fixing.
C1000 v5.1, new software package.
C3000 v5.2, new parameters and files.
EEM3 v5.1, bug in engine temperature fixed.
EEM4 v5.1, oscilloscope added for engine tests.
Diagnostic Surface:

Values of proportional valves changed from mA to % on Power Shift pages.
Fault Trees:

Service codes added for SECU.
Service codes set visible for AC17.21.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 5

Vehicles Affected:

Massey Ferguson: MF 2700-4700 Series
General:

Vehicle Version 2.80.
Cab models available.
Add Auto7 Linkage label codes J, H and I.
Add saving of Engine Hours and Maintenance Hours before the flash of the Dashboard.
Add AGCOMMAND presence selection to avoid long time loading when leaving the Network scan screen.
Allow Injector calibration in T4F.
An authorization code is now needed to change the Auto7 constants.
New EEM4 content for Tier4i and Tier3 tractors:
Solved a bug when opening Actuator Test.
Solved an issue where a label had a dark background on SCR diagnostic surface.
Implemented Oscilloscope windows on all engine tests.
New EEM4F content for Tier4F tractors:
Engine configuration surface has now a summary with all supported engine tests.
Engine tampering log added.
Catalyst Cleanup configuration added (Need compatible software).
Included Oscilloscope window on all engine tests.
Included a check of start conditions of a test.
High Pressure Delivery Rate Test added (Need compatible software).
PCV Hysteresis Test added (Need compatible software).
Airsystem Actuator Test added (Need compatible software).
Software:

Initial release of T4F engine software.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 6

Vehicles Affected:

Massey Ferguson: MF 6700R Series
General:

Vehicle Version 2.80.
Fix Dashboard label codes reading without administrator rights on computer/tablet.
Software:

New Dashboard IC1 software v3.1.0:
Standardization on all Dyna-4 tractors.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 7

Vehicles Affected:

Massey Ferguson: MF 5700-6700 Series
General:

Vehicle Version 2.80.
Management of Chinese domestic models.
Cab models available.
Add Auto7 Linkage label codes J, H and I.
Add saving of Engine Hours and Maintenance Hours before the flash of the Dashboard.
Add illustration picture for 5700 and 6700 models in the model selection screen.
Display the transmission label codes and constants table setting and transmission flash when 5700 and 6700 without ISC.
Add AGCOMMAND presence selection to avoid long time loading when leaving the Network scan screen.
An authorization code is now needed to change the Auto7 constants.
New EEM4 content for Tier4i and Tier3 tractors:
Solved a bug when opening Actuator Test.
Solved an issue where a label had a dark background on SCR diagnostic surface.
Implemented Oscilloscope windows on all engine tests.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 8

Vehicles Affected:

FELLA: SM 8312, SM 9314
Fendt: Slicer 9314 TLKCB
Massey Ferguson: DM 8312 EL-TL-RCB, DM 9314 EL-TL-KCB
General:

Vehicle Version 1.11.
New models added.
Software:

EXT-LT Bios Version 2.0.3.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 9

Vehicles Affected:

Fendt: 8380P, 8380P AL, 8410P, 8410P AL, 9490X, 9490X AL
Massey Ferguson: 7380, 7380 AL, 7382, 7382 AL, 9380, 9380 AL
Diagnostics:

Vehicle Version 1.12.
Engine Plug-In updated.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 10

Vehicles Affected:

ATS: System 150 (universal support)
General:

Vehicle Version 2.1.
The unsupported Guidance System Profile Configuration exportation has been removed.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 11

Vehicles Affected:

Challenger: 5300 DynaSwath
Massey Ferguson: 5300 DynaSwath
General:

Vehicle Version 2.2.
VMM Software:
New VMM software improves reel speed control to prevent speed surges.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 12

Vehicles Affected:

Massey Ferguson: 1700 Series
General:

Vehicle Version 2.1.
Fixed issue where opening the Transmission/Hydrostatic Drive diagnostic surface caused an internal error diaglog box.
Pressure Sensor Forward indicator on the MF1759 Transmission/PowerShuttle diagnostic surface now displays the correct value.
Included Mitsubishi Plugin v5.1.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 13

Vehicles Affected:

Massey Ferguson: 4600 Series
General:

Vehicle Version 2.2.
Updated the MF4609M and MF4610M engine files to v1.0.2 rev 1.
Updated Tier 4F plugin to v5.2.
Updated Tier 4i plugin to v5.1.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 14

Vehicles Affected:

Massey Ferguson: MF 8600 Series
Challenger: MT600D Series
AGCO: DTB Series
General:

Vehicle Version 8.20.
New Tier2 models available 8660 and 8680.
Fix Dashboard label codes reading without administrator rights on computer/tablet.
New EEM4 content for Tier4i tractors:
Solved a bug when opening Actuator Test.
Solved an issue where a label had a dark background on SCR diagnostic surface.
Implemented Oscilloscope windows on all engine tests.
New AG3000 content:
Added 4.1K12p8 Software.
Added bootloader flash capability.
New C3000 content:
Added 3.17.408 Software.
Software:

New Armrest Software V1.22.0 for Tier3 tractors:
Bug fixing.
Fix hydraulic valve status.
Fix management of FingerTips.
Fix Linkage status on ISO11786 plug.
New Linkage Software V2.18.0 for Tier3 tractors:
Bug fixing.
New ParkLock/Front axle Software V2.22.0 for Tier3 tractors:
Fix a bug with ParkLock engagement if no trailer brake and brake pedals pressed.
New Engine software for Tier4i tractors:
Reduction of unburnt HC emission into catalyst to avoid error 4090FMI16.
Grid post heating above 800rpm engine speed.
New EXT software v1.11 for Tier4i tractors:
Fix limp home mode.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 15

Vehicles Affected:

Challenger: MT 700C, MT 800C, MT 900C
General:

Vehicle Version 3.30.
Fixed bug causing network scan to crash on MT900C.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 16

Vehicles Affected:

Massey Ferguson: 9520, 9530, 9540, 9550, 9545, 9560, 9565
Challenger: 520C, 530C, 540C, 540E, 550C, 560C, 560E
General:

Vehicle Version 4.6.
Added Vehicle Content Software.
Updated AG3000 Software to v4.1k12p8.
Updated C2100 Software to v3.2.0.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 17

Vehicles Affected:

Massey Furgeson: 8100, 8200, 8300, 8500, 8700, 8800, and 9000 Series Planters
Challenger: 8100, 8200, 8300, 8500, 8700, 8800, and 9000 Series Planters
White: 8100, 8200, 8300, 8500, 8700, 8800, and 9000 Series Planters
General:

Vehicle Version 4.5.
Software:

New Dickey John Software (7.04):
Updated Task Controller to be ISO 11783 Part 10 Version 3 compatible.
Improved Task Controller communications.
Improved implement width calculations.
Added Task Controller support for multiple operations.
Improved functionality with multiple VTs.
Improved accuracy of monitoring channels.
Streamlined On/Off Row Pattern Functionality.
Updated translations.
Added TECU flash.
Updated flash instructions.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 18

Vehicles Affected:

Challenger: RG600
General:

Vehicle version 3.4.
Updated Plug-ins:
AG3000 Diagnostics v5.2.
C3000 Terminal v5.2.
AGCO POWER TIER3 EEM3 v5.1.
AGCO POWER TIER4 EEM4 v5.1.
AGCO POWER TIER4 Final v5.2.
Software:

C3000 Terminal: version X30_AGCO_v3.17.408_full_ upgrade.
Norac UC5 Control Module: E2UC5-UP4_8_0_0.
AG3000 Receiver: 4.1K12 Dec,08,2014 p8.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 19

Vehicles Affected:

Ro-Gator: RG700, RG700B
Challenger: RG700, RG700B
General:

Vehicle Version 3.2.
Updated RG700B LRC engine software:
Fixed bug causing engine to seek EPA components.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 20

Vehicles Affected:

Valtra: S3 and S4 Series
General:

Vehicle Version 6.30.
Option available in DCC3 label codes to set the new Vistronic Kit parameter.
Fix display of latest version available for DCC3 software when ACHT.
Fix Dashboard label codes reading without administrator rights on computer/tablet.
New EEM4 content for Tier4i tractors:
Solved a bug when opening Actuator Test.
Solved an issue where a label had a dark background on SCR diagnostic surface.
Implemented Oscilloscope windows on all engine tests.
New EEM4F content for Tier4F tractors:
Engine configuration surface has now a summary with all supported engine tests.
Engine tampering log added.
Catalyst Cleanup configuration added (Need compatible software).
Included Oscilloscope window on all engine tests.
Included a check of start conditions of a test.
High Pressure Delivery Rate Test added (Need compatible software).
PCV Hysteresis Test added (Need compatible software).
Airsystem Actuator Test added (Need compatible software).
New AG3000 content:
Added 4.1K12p8 Software.
Added bootloader flash capability.
New C3000 content:
Added 3.17.408 Software.
New C1000 content:
CCD Version 3.2.0 available.
Software:

New Engine software for Tier4i tractors:
Reduction of unburnt HC emission into catalyst to avoid error 4090FMI16.
Grid post heating above 800rpm engine speed.
New EXT software v1.11 for Tier4i tractors:
Fix limp home mode.
New Dashboard DCC3 software v2.1.1 for monochrome armrest or v2.3.6 for color armrest (S3 only):
Management of new Vistronic Kit.
New Dashboard IC1 software v2.8.0 (S4 only).

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 21

Vehicles Affected:

Gleaner: S67, S77
General:

Vehicle Version 3.13.
Updated AG3000 SW to v4.1k12p8.
Update C2100 SW to v3.2.0.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 22

Vehicles Affected:

Gleaner: S68, S78, S88
General:

Vehicle Version 3.10.
Updated AG3000 SW to v4.1k12p8.
Update C2100 SW to v3.2.0.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 23

Vehicles Affected:

Gleaner: S96, S97, S98
General:

Vehicle Version 2.0.
Initial release for CEA Transverse.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 24

Vehicles Affected:

Massey Ferguson: MF2604H, MF2605H, MF2606H, MF2607H
General:

Vehicle Version 1.1.
Software:

Updated engine files.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 25

Vehicles Affected:

Valtra: T4-series, N4-series
General:

Vehicle Version 1.26.
AGCOMMAND set visible for all models.
Descriptions of service codes updated.
Release date information of engine hex-file fixed.
Speed sensor calibration hidden if radar not installed.
Valve head management set visible also for Hitech and Active.
Updated plug-ins:
AG3000 v5.2, bug fixing.
C1000 v5.1, new software package.
C3000 v5.2, new parameters and files.
EEM4f v5.2, improvements and bug fixing.
Diagnostic Surface:

Signal values of proportional valves updated on Power Shift pages.
Power Shift layout diagnostic pages added.
U-pilot working diagram page added.
Fault Trees:

Service codes added for IO1 and IO2 modules.
Software:

AC24.5 (1.5.0.0):
TC, LCD, Proline.
AC25.5 (1.5.0.0):
TC, LCD, Proline.
AC26.5 AC27.5 (1.5.0.0):
TC, LCD, HARM, Proline.
SECU (1.5.0.0):
Operation status CAN message removed.
SUS1 (1.1.0.0):
Control of air pressure valve improved.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 26

Vehicles Affected:

Challenger: WR9725, WR9740, WR9735 (Tier4), WR9740 (Tier2), WR9760 (Tier2/4), WR9770 (Tier2/4)
Massey Ferguson: WR9725, WR9740, WR9735 (Tier4), WR9740 (Tier2), WR9760 (Tier2/4), WR9770 (Tier2/4)
General:

Vehicle Version 2.2.
Ground Drive Graphical Surface:
Added Sensor supply voltage and Throttle sensor voltage to the Propel Overview page of the Ground Drive Graphical surfaces.
Main Controller Flash Script:
Parameter restore no longer depends on network scan making it less likely to reset parameters.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 27

Vehicles Affected:

Massey Ferguson: MF 5600 Series
General:

Vehicle Version 4.6.
In Armrest configuration screen, first button is no more highlighted in blue to avoid confusion.
Fix Dashboard label codes reading without administrator rights on computer/tablet.
New EEM4 content:
Solved a bug when opening Actuator Test.
Solved an issue where a label had a dark background on SCR diagnostic surface.
Implemented Oscilloscope windows on all engine tests.
Software:

New Engine software for 5611, 5612, 5613 tractors:
Reduction of unburnt HC emission into catalyst to avoid error 4090FMI16.
Grid post heating above 800rpm engine speed.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 28

Vehicles Affected:

Massey Ferguson: MF 8700 Series
Challenger: MT600E Series
General:

Vehicle Version 2.70.
Fix Dashboard label codes reading without administrator rights on computer/tablet.
New EEM4F content:
Engine configuration surface has now a summary with all supported engine tests.
Engine tampering log added.
Catalyst Cleanup configuration added (Need compatible software).
Included Oscilloscope window on all engine tests.
Included a check of start conditions of a test.
High Pressure Delivery Rate Test added (Need compatible software).
PCV Hysteresis Test added (Need compatible software).
Airsystem Actuator Test added (Need compatible software).
New AG3000 content:
Added 4.1K12p8 Software.
Added bootloader flash capability.
New C3000 content:
Added 3.17.408 Software.
Software:

New EXT software v1.11 for Tier4i tractors:
Fix limp home mode.
New Dashboard IC1 software v3.0.0:
Standardization on X700 tractors.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 29

Vehicles Affected:

Massey Ferguson: MF 7700 Series
Challenger: MT500E Series
Iseki: i7700 Series
General:

Vehicle Version 1.70.
New cab suspension system diagnostic available.
Release of Tier3 engine models in Africa, Asia, South America, North America, Estern Europe, ANZJ.
No engine software available at the moment.
Fix Error codes description 6.1.1A, 6.1.1B, 6.1.1C and 6.1.1D.
Fix a display bug with X19 in Air conditioning diagnostic screen in Dyna-6.
Fix connector number and link to help file on Oil Temperature signal on Dyna-6 Linkage diagnostic.
Fix Inversion between suspension and upshift solenoid valve in Front axle suspension diagnostic screen.
Fix PTO Brake solenoid valve status on Dyna-6 and Dyna-4 PTO diagnostic screen.
In Armrest configuration screen, first button is no more highlighted in blue to avoid confusion.
Fix Dashboard label codes reading without administrator rights on computer/tablet.
New EEM4F content for Tier4F tractors:
Engine configuration surface has now a summary with all supported engine tests.
Engine tampering log added.
Catalyst Cleanup configuration added (Need compatible software).
Included Oscilloscope window on all engine tests.
Included a check of start conditions of a test.
High Pressure Delivery Rate Test added (Need compatible software).
PCV Hysteresis Test added (Need compatible software).
Airsystem Actuator Test added (Need compatible software).
New EEM4 content for Tier3 tractors:
Solved a bug when opening Actuator Test.
Solved an issue where a label had a dark background on SCR diagnostic surface.
Implemented Oscilloscope windows on all engine tests.
New AG3000 content:
Added 4.1K12p8 Software.
Added bootloader flash capability.
New C3000 content:
Added 3.17.408 Software.
Software:

New EXT software V1.11 for Dyna-VT tractors:
Fix limp home mode.
New Dashboard IC1 Dyna-4 and Dyna-6 software v3.1.0:
Management of 3rd loader function.
Management of 600 hour maintenance interval.
Management of new cab suspension system.
New inversion logic.
New Dashboard IC1 Dyna-VT software v3.0.0:
Management of 3rd loader function.
Management of 600 hour maintenance interval.
Management of new cab suspension system.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 30

Vehicles Affected:

Massey Ferguson: MF 6600 Series
Challenger: MT400D Series
Iseki: i6600 Series
General:

Vehicle Version 8.6.
New Dyna-6 AA codes for PTO low and high inertia start (MF6613<->MF7618).
New Dyna-4 AA codes for PTO low and high inertia start (MF6612<->MF7615).
Fix wrong ratio on label codes AA for MF6613-6614.
In Armrest configuration screen, first button is no more highlighted in blue to avoid misunderstanding.
Fix display bug in Parklock diagnostic screen in Dyna-VT.
Better translation in German for the Code AA=29 in the Linkage label codes.
Fix Dashboard label codes reading without administrator rights on computer/tablet.
New EEM4 content for Tier4i tractors:
Solved a bug when opening Actuator Test.
Solved an issue where a label had a dark background on SCR diagnostic surface.
Implemented Oscilloscope windows on all engine tests.
New AG3000 content:
Added 4.1K12p8 Software.
Added bootloader flash capability.
New C3000 content:
Added 3.17.408 Software,
Software:

New EXT software V1.11 for Dyna-VT tractors:
Fix limp home mode.
New Engine software for Tier4i tractors:
Reduction of unburnt HC emission into catalyst to avoid error 4090FMI16.
Grid post heating above 800rpm engine speed.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 31

Vehicles Affected:

Massey Ferguson: MF 7600 Series
Challenger: MT500D Series
Iseki: i7600 Series
General:

Vehicle Version 8.6.
New Dyna-6 AA codes for PTO low and high inertia start (MF6613<->MF7618).
New Dyna-4 AA codes for PTO low and high inertia start (MF6612<->MF7615).
In Armrest configuration screen, first button is no more highlighted in blue to avoid misunderstanding.
Fix display bug in Parklock diagnostic screen in Dyna-VT.
Better translation in German for the Code AA=29 in the Linkage label codes.
Fix Dashboard label codes reading without administrator rights on computer/tablet.
New EEM4 content for Tier4i tractors:
Solved a bug when opening Actuator Test.
Solved an issue where a label had a dark background on SCR diagnostic surface.
Implemented Oscilloscope windows on all engine tests.
New AG3000 content:
Added 4.1K12p8 Software.
Added bootloader flash capability.
New C3000 content:
Added 3.17.408 Software.
Software:

New EXT software V1.11 for Dyna-VT tractors:
Fix limp home mode.
New Engine software for Tier4i tractors:
Reduction of unburnt HC emission into catalyst to avoid error 4090FMI16.
Grid post heating above 800rpm engine speed.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 32

Vehicles Affected:

Valtra: BE1035e
General:

Vehicle Version 1.3.
Released Machine Package Software to Flash by Flash Drive.
Engine Software updated.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 33

Vehicles Affected:

Massey Ferguson: MF9030
Valtra: BS3020H
General:

Vehicle Version 1.84.
AG3000 Plugin updated.
C3000 Plugin updated.
Norac Plugin updated.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 34

Vehicles Affected:

Challenger: 670B (SA), 680B (SA)
Massey Ferguson: 9795 (SA), 9895 (SA)
Valtra: BC7800 (SA), BC8800 (SA)
General:

Vehicle Version 1.5.
Machine Software updated.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 35

Vehicles Affected:

Massey Ferguson: 6690
General:

Vehicle Version 2.3.
New Release for Machine MF5690.
Machine Software updated.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 36

Vehicles Affected:

Massey Ferguson: MF32, MF32SR
General:

Vehicle Version 1.2.
Machine Software update.

--------------------------------------------------------------------------------

Release Notes - 10/19/2015 (Update 0170)

EDT NOTES:

EDT Version: 1.73.15237.796

EDT

Upgraded application codebase to use Microsoft .NET Framework 3.5.
Sontheim Release 1.07.4207:
Increased compatibility for running Fendias on same PC as EDT.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 1

Vehicles Affected:

Massey Ferguson: 2700e
General:

Added Freeze Frame data to Stored DTCs.
Added Glow Relay Test.
Added Intake Throttle Valve Test.
Added Authorization for Spare part ECU Flash.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 2

Vehicles Affected:

Challenger: WR9860, WR9870
Massey Ferguson: WR9860, WR9870
General:

Added Active Rear Wheel Steer Support.
Includes: Extra Model Mapping, Flash Support, and Calibration Support.
Load control bar graph data out of range problem has been fixed.
Header lift and tilt diagnostic screen indicators have been fixed.
Update the console software to version 2.1.3.
Updated the AGCO Power Plug-in to version 5.0.
Enabled Waste Gate Actuator.
Enables fuel consumption message.
Header Lift diagnostic page no longer gives an error when the page is started.
Updated the AGCOMMAND Plug-in to version 5.0.
Updated the Guidance Plug-in to version 5.0.
Updated the Guidance Plug-in to version 5.0.
Added the funtionality to update the C3000.
Parameters are no longer lost when the user flashes the main controller without admin rights.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 3

Vehicles Affected:

AGCOMAND (Universal Kit Support)
Diagnostics:

Release v1.7.
Plug-In updated.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 4

Vehicles Affected:

Massey Ferguson: 3600 Series
Diagnostics:

Release v3.14.
Engine Plug-In updated.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 5

Vehicles Affected:

Laverda: AL4 Evolution
Diagnostics:

Release v1.10.
Engine Plug-In updated.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 6

Vehicles Affected:

Sunflower: 9830
General:

Vehicle Version 1.0.
Initial Release.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 7

Vehicles Affected:

Valtra: T-series, N-series, A-series
General:

Vehicle Version 3.8.
Initial release of AC17.21.
Fixed a bug in ISOAD flash procedure.
Cab suspension SUS1 set visible for AC16.2.
Old software package (1.1.1.0) from AC17.2 removed.
Updated plug-ins:
AG3000 v5.0, revision update.
AGCOMMAND v5.0, revision update.
C1000 v5.0, revision update.
C3000 v5.0, revision update.
EEM3 v5.0, revision update.
EEM4 v5.0, revision update.
LHLink v5.0, configuration tools added.
PVED-CL v5.0, revision update.
Topcon System 150 v5.0, revision update.
Calibration:

Fixed the bug in AUTO calibration program for Versu/Direct.
Added some delay to speed sensor calibration.
Fault Trees:

General update with translations.
Software:

AC14.3 (2.0.1.0):
HST speed sensor diagnostic improved to avoid false service codes.
AC14.33 (2.0.1.0):
HST speed sensor diagnostic improved to avoid false service codes.
EEM4 engine software hex-files for T133H, T153H and T153V LRC tractors:
Prevents the service code 520293-31-0.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 8

Vehicles Affected:

Massey Ferguson: 1436, 6631
Challenger: 1436, 6631
Sunflower: 1436, 6631
General:

Updated Challenger Implement configurations in EDT.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 9

Vehicles Affected:

AGCO
Round Balers: 2846, 2856
Square Balers: 2140, 2150, 2160, 2170, 2190
Challenger
Round Balers: RB46C, RB56C, 2946, 2956
Square Balers: LB23B, LB24B, LB33B, LB34B, LB34BXD, LB44B, 2240, 2250, 2260, 2270, 2270XD, 2290
Fendt
Square Balers: 870, 990, 1270, 1290, 1290XD, 12130
Massey Ferguson
Round Balers: 2846, 2856, 2946, 2956
Square Balers: 2140, 2150, 2160, 2170, 2170XD, 2190, 2240, 2250, 2260, 2270, 2270XD, 2290
General:

C2100 is now compatible with the baler
Updated C1000 Plug-in to 5.0 to be compatible with the new lower layers.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 10

Vehicles Affected:

Valtra: BE1035e
General:

Vehicle Version 1.3.
AG3000 Plugin updated.
C3000 Plugin updated.
AGCOMMAND Plugin updated.
EEM4 Plugin updated.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 11

Vehicles Affected:

Massey Ferguson: MF9030
Valtra: BS3020H
General:

Vehicle Version 1.83.
AG3000 Plugin updated.
C3000 Plugin updated.
PVED_CL Plugin updated.
AGCOMMAND Plugin updated.
System 150 Plugin updated.
C1000 Plugin updated.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 12

Vehicles Affected:

Massey Ferguson: MF7350-MF7370-MF7390-MF7415 Models
Valtra: BT150-BT170-BT190-BT210 Models
General:

Vehicle Version 4.5.
Plug-Ins update for CANUSB new drivers.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 13

Vehicles Affected:

Challenger: 660B (SA), 670B (SA), 680B (SA)
Massey Ferguson: 9695 (SA), 9795 (SA), 9895 (SA)
Valtra: BC6800 (SA), BC7800 (SA), BC8800 (SA)
General:

Vehicle Version 3.5.
AG3000 Plugin updated.
PVED_CL Plugin updated.
AGCOMMAND Plugin updated.
EEM4 Plugin updated.
EEM3 Plugin updated.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 14

Vehicles Affected:

Massey Ferguson: 6690
General:

Vehicle Version 2.3.
AG3000 Plugin updated.
PVED_CL Plugin updated.
AGCOMMAND Plugin updated.
C1000 Plugin updated.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 15

Vehicles Affected:

Massey Ferguson: MF 6700R Series
General:

Vehicle Version 2.70.
Fix the integration of Fault trees in all languages.
Plug-Ins update for CANUSB new drivers.
Software:

New Transmission software v1.1.0 (6700R only):
Bug fixing.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 16

Vehicles Affected:

Massey Ferguson: MF 2700-4700 Series
General:

Vehicle Version 2.70.
Allow more space for some signals that were not fully displayed in diagnostic screen.
Integration of missing language in the fault trees.
Change error code 4.1.55 description: 105°C to 150°C.
Plug-Ins update for CANUSB new drivers.
Software:

New Dashboard Software v1.50:
Bugs fixing.
New Linkage software v1.12.0:
Management of 5700 and 6700 models.
New label code J for PTO management.
New Transmission Software v2.06.0:
Management of 5700 and 6700 models.
On 4700, improvement of clutch with pedal and speed declutch button.
No engine sofware available for AGCO Power Tier3 tractors.
No engine sofware available for AGCO Power Tier4F tractors.
No engine sofware available for Simpson Tier4F tractors.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 17

Vehicles Affected:

Massey Ferguson: MF 5700-6700 Series
General:

Vehicle Version 2.60.
Initial release for North America (Mexico) and Africa.
No engine sofware available for AGCO Power Tier3 tractors.
No engine sofware available for AGCO Power Tier4F tractors.
No engine sofware available for Simpson Tier4F tractors.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 18

Vehicles Affected:

Challenger: Legacy combines with AGCO Power Tier3 engines
Fendt: Legacy combines with AGCO Power Tier3 engines
Laverda: Legacy combines with AGCO Power Tier3 engines
Massey Ferguson: Legacy combines with AGCO Power Tier3 engines
Diagnostics:

Release v1.1.
Engine Plug-In updated.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 19

Vehicles Affected:

Challenger: CH654B, CH658B
Fendt: 8370, 8400, 9470X
Massey Ferguson: 7280, 7282, 9280
Diagnostics:

release v1.14.
Updated all Plug-Ins.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 20

Vehicles Affected:

FELLA: SM8312, SM9314
Massey Ferguson: DM 1399
Software:

EXT-LT Bios Version 1.0.12 MY201.
EXT-LT Bios Version 2.0.3 MY2015.
Diagnostics:

Release 1.10.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 21

Vehicles Affected:

Fendt: 8380P, 8380P AL, 8410P, 8410P AL, 9490X, 9490X AL
Massey Ferguson: 7380, 7380 AL, 7382, 7382 AL, 9380, 9380 AL
Software:

EXT: Bios 1.05:
Fan speed control improved.
Losses performance visualization improved.
TaskDoc functionalities improved.
New Engine Software:
Fixed bug on generation of alarms:
SPN 521025, FMI 31 (SCR efficiency not OK).
SPN 102, FMI 12 (Intake pressure sensor signal is not plausible).
Diagnostics:

Release v1.11.
Updated all Plug-Ins.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 22

Vehicles Affected:

ATS: System 150 (universal support)
General:

Update to AG 150 plugin supporting the newer lower layers.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 23

Vehicles Affected:

Challenger: 5300 DynaSwath
Massey Ferguson: 5300 DynaSwath
General:

Compatibility Updates for EDT.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 24

Vehicles Affected:

Massey Ferguson: 1700 Series
General:

Update the Compram to support the newer lower layers.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 25

Vehicles Affected:

Massey Ferguson: 4600 Series
General:

Added 4600M vehicles.
Updated the Compram to support the newer lower layers.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 26

Vehicles Affected:

Massey Ferguson: MF 8600 Series
Challenger: MT600D Series
AGCO: DTB Series
General:

Vehicle Version 8.6.
Update Netherlands dealer codes for 50km/h access.
Plug-Ins update for CANUSB new drivers.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 27

Vehicles Affected:

Challenger: CH652CA
Fendt: 5275CA, 5275CPLA, 6335CA, 6335CPLA
Laverda: M400A, M400LCA, M400LCIA, M410A, M410LCA
Massey Ferguson: 7360A, 7360PLA, 7370A, 7370PLA
Diagnostics:

Vehicle diagnostic content release v1.19.
Engine Plug-In updated.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 28

Vehicles Affected:

Fendt: L-Series 2015: 5255L, 6275L
Fendt: C-Series 2015: 5275CA, 5275CPLA, 6335CA, 6335CPLA
Laverda: M300 Series 2015: M300A, M310A
Laverda: M400 Series 2015: M400A, M400LCA, M400LCIA, M410A, M410LCA
Massey Ferguson: ACTIVA S Series 2015: 7345S, 7347S
Massey Ferguson: BETA Series 2015: 7360A, 7360PLA, 7370A, 7370PLA
General:

MF7345S, MF7347S and MF7370A with Tier2 engines for East European Region added.
Software:

New Engine Software:
Fixed bug on generation of alarms:
SPN 521025, FMI 31 (SCR efficiency not OK).
SPN 102, FMI 12 (Intake pressure sensor signal is not plausible).
Diagnostics:

Release v1.8.
Updated all Plug-Ins.
Diagnostics:

Release v1.8
Updated EEM4F Plug-In v5.0
Tests:

Modelmapping for both West- / and East-European Models:
All models show up correct.
Networkscan:
All ECU’s detected -> correct sw version shown.
Graphical Surfaces:
All Graphical surfaces work.
Calibration:
Enable calibrations on NT01 works.
Configuration:
System Setup works.
Diagnostic Tests:
Force EDC pump – reviewed by analyzing CAN messages.
Force spool valves – reviewed by analyzing CAN messages.
Force outputs – reviewed by analyzing CAN messages.
SW Flash:
every individual ECU flashed -> all works.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 29

Vehicles Affected:

Challenger: CH644
Fendt: 5220E
Laverda: M200
Massey Ferguson: 7244
Diagnostics:

Release v1.8.
Engine Plug-In updated.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 30

Vehicles Affected:

Challenger: CH645C, CH647C
Fendt: 5255L, 6275L
Laverda: M300, M310
Massey Ferguson: 7345S, 7347S
Diagnostics:

Release v1.10.
Engine Plug-In updated.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 31

Vehicles Affected:

Challenger: CH648C, CH652C
Fendt: 5275C, 5275CPL, 6335C, 6335CPL
Laverda: M400, M400LC, M400LCI, M410, M410LC
Massey Ferguson: 7360, 7360PL, 7370, 7370PL
Diagnostics:

Release v1.24.
Engine Plug-Ins updated.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 32

Vehicles Affected:

Massey Ferguson: MF32, MF32SR
General:

Vehicle Version 1.1.
C1000 Plugin updated.
AGCOMMAND Plugin updated.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 33

Vehicles Affected:

Massey Fergusson: MF7100
Valtra: BH Series 140-210, BH135i, BM100
General:

Vehicle Version 2.0.
Replace Master BH Series.
Replace Master BM100.
Replace Master MF7100.
New Release BM125i.
System150 Plugin updated.
AG3000 Plugin updated.
PVED_CL Plugin updated.
AGCOMMAND Plugin updated.
C3000 Plugin updated.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 34

Vehicles Affected:

Challenger: 660 (SA), 670 (SA)
Massey Ferguson: 9690 (SA), 9790 (SA)
Valtra: 6500 (SA), 7500 (SA)
General:

Vehicle Version 1.4.
AG3000 Plugin updated.
PVED_CL Plugin updated.
AGCOMMAND Plugin updated.
EEM4 Plugin updated.
C2100 Flash Package Fixed.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 35

Vehicles Affected:

Challenger: MT 700C, MT 800C, MT 900C
General:

Vehicle Version 3.29.
Updated C3000 plug-in to version 5.0:
Includes C3000 software version 3.17.307ag.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 36

Vehicles Affected:

Challenger: MT 700D
General:

Vehicle Version 1.23.
Updated C3000 plug-in to version 5.0:
Includes C3000 software version 3.17.307ag.
Updated Engine software to version 1.5.0 Rev. 1:
Remove 1043-4 error code.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 37

Vehicles Affected:

Challenger: MT 700E, MT 800E, MT 900E
General:

Vehicle Version 2.9.
Updated MT 800/900E EPA engine software to v1.0.0 Rev. 2:
Updated power tolerances.
Throttle response improvements.
Updated C3000 plug-in to v5.0:
Includes C3000 software version 3.17.307ag.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 38

Vehicle Versions:

Massey Ferguson: 9520, 9530, 9540, 9550, 9545, 9560, 9565
Challenger: 520C, 530C, 540C, 540E, 550C, 560C, 560E
General:

Updated all Plugins.
Updated AG3000 Plugin Parameter.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 39

Vehicle Versions:

Massey Ferguson: 9760, 9790, 9895(HSC-HUC)
Challenger: 660, 670, 680B(HSC-HUC)
Gleaner: A65, A75, A85 (HSC-HUC)
General:

Updated EEM3 Plugin.
Engine file selection now done automatically.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 40

Vehicles Affected:

Massey Ferguson: 8100, 8200, 8300, 8500, 8700, 8800, and 9000 Series Planters
Challenger: 8100, 8200, 8300, 8500, 8700, 8800, and 9000 Series Planters
White: 8100, 8200, 8300, 8500, 8700, 8800, and 9000 Series Planters
Software:

Updated C3000 plugin to most recent and updated comparam files.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 41

Vehicles Affected:

Massey Ferguson: MF5xx, MF7xx
Valtra: Frontier, HiTech
General:

Vehicle Version 1.1.
C3000 Plugin updated.
SGR-1 Plugin updated.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 42

Vehicles Affected:

RoGator: RG 900, RG 900B, RG 1100, RG 1100B, RG 1300, RG 1300B
Challenger: RG 900, RG 1100, RG 1300
General:

Vehicle Version 1.22.
Updated C3000 plug-in to version 5.0:
Includes C3000 software version 3.17.307ag.
Updated RG900B EPA engine software to version 1.0.2 Rev. 2:
Disabled EGR and Waste Gate Actuator during after run process.
Updated RG1100B & RG1300B EPA engine software to version 1.0.2 Rev. 1:
Disabled EGR and Waste Gate Actuator during after run process.
Updated Lighting Modules to version 8.0:
Adjusted values for track adjust sensor feedback. When wheels are fully tracked out, C1000 terminal will display 76" per wheel and 152" overall.
Updated PVED Parameters to Rev 4:
Improved Raven SmarTrax performance.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 43

Vehicles Affected:

Challenger: RG600
General:

Vehicle version 3.3.
Updated Plug-ins:
Topcon System 150 v5.0.
AG3000 Diagnostics v5.0.
AGCOMMAND Diagnostics v5.0.
C3000 Terminal v5.0.
AGCO POWER TIER3 EEM3 v5.0.
AGCO POWER TIER4 EEM4 v5.0.
AGCO POWER TIER4 Final v5.0.
Norac UC5 v5.0.
PVED-CL Steering Valve v5.0.
SGR-1 Receiver Support v5.0.
Software:

RG635C MY2015 machines: T4F engine software update (version 1.0.2 Rev.1).
C3000 Terminal:version X30_AGCO_v3.17.307agco_rel_full upgrade.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 44

Vehicles Affected:

RoGator: RG700, RG700B
Challenger: RG700, RG700B
General:

Vehicle Version 3.2.
Updated C3000 plug-in to version 5.0:
Includes C3000 software version 3.17.307ag.
Updated RG700B EPA engine software to version 1.0.2 Rev. 4:
Disabled EGR and Wastegate Actuator diagnostics during after run process.
Updated PVED Parameters to Rev 4:
Improved Raven SmarTrax performance.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 45

Vehicle Versions:

Gleaner: R65, R75, R66, R76
General:

Updated all Plugins.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 46

Vehicle Versions:

Massey Ferguson: 9695, 9795, 9895
Challenger: 660B, 670B, 680B
Fendt: 9300R, 9350R, 9460R
Laverda: ML700, ML800
Gleaner: A66, A76, A86
General:

Updated all Plugins.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 47

Vehicles Affected:

Valtra: S3 and S4 Series
General:

Vehicle Version 6.20.
Fix the link to Help file on warning message when changing transmission code AA.
Update Netherlands dealer codes for 50km/h access.
Plug-Ins update for CANUSB new drivers.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 48

Vehicle Versions:

Gleaner: S67, S77
General:

Updated all Plugins.
Updated AG3000 Plugin Parameter.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 49

Vehicle Versions:

Gleaner: S68, S78, S88
General:

Updated all Plugins.
Updated AG3000 Plugin Parameter.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 50

Vehicle Affected:

Massey Ferguson: T7
General:

Updated all Plugins.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 51

Vehicles Affected:

Massey Ferguson: MF2604H, MF2605H, MF2606H, MF2607H
Diagnostics:

Initial Release 1.0.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 52

Vehicles Affected:

Challenger: TerraGator 8333
General:

Vehicle version 2.6.
Updated Plug-in:
Topcon System 150 v5.0.
AG3000 Diagnostics v5.0.
AGCOMMAND Diagnostics v5.0.
C3000 Terminal v5.0.
AGCO POWER TIER3 EEM3 v5.0.
PVED-CL Steering Valve v5.0.
SGR-1 Receiver Support v5.0.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 53

Vehicles Affected:

TerraGator: TG 6303, TG 8303
General:

Vehicle Version 2.9.
Fixed Dash Cluster software version mismatch on Network Scan.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 54

Vehicles Affected:

TerraGator: TG 7300, TG 7300B, TG 8300, TG 8300B, TG 8400, TG 8400B, TG 9300, TG 9300B
Challenger: TG 8300, TG 8300B
General:

Vehicle Version 1.32.
Updated EPA engine software to version 1.0.2 Rev. 1:
Disabled EGR and Waste Gate Actuator during after run process.
Updated PVED Parameters to Rev 3:
Improved Raven SmarTrax performance.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 55

Vehicles Affected:

Challenger: TG 835
General:

Vehicle version 1.5.
Updated Plug-ins:
AG3000 Diagnostics v5.0.
AGCOMMAND Diagnostics v5.0.
C3000 Terminal v5.0.
AGCO POWER TIER4 Final v5.0.
PVED-CL Steering Valve v5.0.
SGR-1 Receiver Support v5.0.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 56

Vehicles Affected:

Challenger: TG 845
General:

Vehicle version 1.7.
Updated Plug-ins:
AG3000 Diagnostics v5.0.
AGCOMMAND Diagnostics v5.0.
C3000 Terminal v5.0.
AGCO POWER TIER4 EEM4 v5.0.
PVED-CL Steering Valve v5.0.
SGR-1 Receiver Support v5.0.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 57

Vehicles Affected:

Valtra: T4-series, N4-series
General:

Vehicle Version 1.24.
Bug in TECU and ISOAD flash procedure fixed.
Basic Control models AC27.51 set visible.
ECU version information added to Network Scan page.
New diagnostic connection ISOBUS added.
T4 and N4 set visible to ANZJ region.
Updated plug-ins:
AG3000 v5.0, revision update.
AGCOMMAND v5.0, revision update.
C1000 v5.0, revision update.
C3000 v5.0, revision update.
EEM4f v5.0, revision update.
LHLink v5.0, revision update.
PVED-CL v5.0, revision update.
Diagnostic Surface:

Diagnostic pages for TwinTrac, Quick Steering and Cab Suspension added.
Diagnostic pages for Basic Control models added.
Cruise pages fixed and updated.
Fault Trees:

Update for all models with translations.
Software:

AC24.5 (1.4.1.0):
New software for Transmission Controller and Tractor Color Terminal.
AC25.5 (1.4.1.0):
New software for Transmission Controller and Tractor Color Terminal.
AC26.5 AC27.5 (1.4.1.0):
New software for Transmission Controller.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 58

Vehicles Affected:

Challenger: WR9770, WR9760, WR9740, WR9735, WR9725
Massey Ferguson: WR9770, WR9760, WR9740, WR9735, WR9725
General:

Updated AG3000 plug-in to version 5.0 which supports 4.1K12p6.
Updated AGCOMMAND plug-in to version 5.0.
Parameters are no longer lost when the user flashes the main controller without admin rights.
Added support for the C3000 under the AG3000 selection. Version 5.0 supports 3.17.307ag.
Updated System 150 plug-in to version 5.0.
Updated AGCO Power plug-in to version 5.0.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 59

Vehicles Affected:

Massey Ferguson: MF 5600 Series
General:

Vehicle Version 4.0.
Remove in previous package flash the DCC3 DVT Software for Dyna-6 and Dyna-4.
Change picture of hand throttle lever in the gearbox diagnostic screen.
Fix difflock solenoid valve status on Dyna-4 and Dyna-6 diagnostic screen.
Allow more space for the Hitch Depth Knob signal in the Linkage diagnostic screen for short console.
Hide Boost diagnostic screen.
Hide C1000 in Long console.
Integration of all Joystick hardware possibility in the Armrest configuration and calibration.
Compatibility of new Joystick hardware in the diagnostic screens.
Add Ground speed signal in Dyna-4 4WD and Difflock diagnostic screen.
Add Linkage position signal in Dyna-4 and Dyna-6 Difflock diagnostic screen.
Automatic detection of Pneumatic brake to hide diagnostic screen when not available.
Plug-Ins update for CANUSB new drivers.
Software:

New DCC3 Software v2.9.0 for Dyna-6 and Dyna-4 tractors:
Fix a bug with kickout launch on float request (work with Hydraulic Control Unit v1.5.0), only MF5600.
New Hydraulic Control Unit Software v1.5.0 for MF5611-5612-5613 tractors:
Fix a bug with kickout launch on float request (work with DCC3 v2.9.0).
New Engine software for 5611, 5612, 5613 tractors:
Improve SCR parameters to fix error code 4090FMI16.
Fix engine performance complaints.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 60

Vehicles Affected:

Massey Ferguson: MF 8700 Series
Challenger: MT600E Series
General:

Vehicle Version 2.60.
Fix VIN reading when Authorization code demand on Dashboard hours modification and constant table modification.
Fix EXT code G number in German.
Debug display of auxiliary hydraulic temperature in Linkage diagnostic screen.
Hide 7700 Armrest configuration.
Hide pneumatic signals in braking system diagnostic screen if no pneumatic brake on the tractor.
Fix an incorrect display of distributor 4 and 6 hydraulic flow on hydraulic diagnostic screen.
Update Netherlands dealer codes for 50km/h access.
Plug-Ins update for CANUSB new drivers.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 61

Vehicles Affected:

Massey Ferguson: MF 7700 Series
Challenger: MT500E Series
Iseki: i7700 Series
General:

Vehicle Version 1.60.
Fix VIN reading when Authorization code demand on Dashboard hours modification and constant table modification.
Fix EXT code G number in German.
Debug display of auxiliary hydraulic temperature in Linkage diagnostic screen.
Hide Armrest configuration for long console.
Fix Throttle percentage in Dyna-4 and Dyna-6 gearbox diagnostic screen.
Hide pneumatic signals in braking system diagnostic screen if no pneumatic brake on the tractor.
Fix PTO diagnostic screen when mecanical speed selection PTO in the tractor.
Hide Multipad signals if no Multipad on the tractor.
Fix Hydraulic valve displayed in the diagnostic screen when loader on the tractor.
Integration of All Joystick Hardware possibility in the Armrest configuration and calibration.
Compatibility of the diagnostic screen with New Joystick hardware.
Update Netherlands dealer codes for 50km/h access.
Add MT525E Autopower VI and TechStar CVT model in North America.
Add MF7715 models in North America.
Plug-Ins update for CANUSB new drivers.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 62

Vehicles Affected:

Massey Ferguson: MF 6400 - MF 7400 - MF 8400 Series
Challenger: MT500B - MT600B Series
AGCO: DTA - RT Series
General:

Vehicle Version 2.8.
Plug-Ins update for CANUSB new drivers.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 63

Vehicles Affected:

Massey Ferguson: MF 6600 Series
Challenger: MT400D Series
Iseki: i6600 Series
General:

Vehicle Version 8.0.
Remove in previous package flash the DCC3 DVT Software for Dyna-6 and Dyna-4.
Change picture of hand throttle lever in the gearbox diagnostic screen.
Fix bug with DCC3 label code E on Dyna-6 50km/h.
Fix a display bug on braking system diagnostic screen on Dyna-VT tractors.
Fix difflock solenoid valve status on Dyna-4 and Dyna-6 diagnostic screen.
Allow more space for the Hitch Depth Knob signal in the Linkage diagnostic screen for short console.
Hide PVED-CL and SASA sensor if Long console tractor.
Hide C1000 in Long console.
Fix inversion between the two float position on the Joystick in Hydraulic diagnostic screen.
Integration of all Joystick hardware possibility in the Armrest configuration and calibration.
Compatibility of new Joystick hardware in the diagnostic screens.
Update Netherlands dealer codes for 50km/h access.
Add Ground speed signal in Dyna-4 4WD and Difflock diagnostic screen.
Add Linkage position signal in Dyna-4 and Dyna-6 Difflock diagnostic screen.
Automatic detection of Pneumatic brake to hide diagnostic screen when not available.
Plug-Ins update for CANUSB new drivers.
Software:

New DCC3 Software v2.9.0 for Dyna-6 and Dyna-4 tractors:
Fix a bug with kickout launch on float request (work with Hydraulic Control Unit v1.5.0), only MF5600.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 64

Vehicles Affected:

Massey Ferguson: MF 7600 Series
Challenger: MT500D Series
Iseki: i7600 Series
General:

Vehicle Version 8.0.
Remove in previous package flash the DCC3 DVT Software for Dyna-6 and Dyna-4.
Change picture of hand throttle lever in the gearbox diagnostic screen.
Fix bug with DCC3 label code E on Dyna-6 50km/h.
Fix a display bug on braking system diagnostic screen on Dyna-VT tractors.
Fix difflock solenoid valve status on Dyna-4 and Dyna-6 diagnostic screen.
Allow more space for the Hitch Depth Knob signal in the Linkage diagnostic screen for short console.
Hide PVED-CL and SASA sensor if Long console tractor.
Hide C1000 in Long console.
Fix inversion between the two float position on the Joystick in Hydraulic diagnostic screen.
Integration of all Joystick hardware possibility in the Armrest configuration and calibration.
Compatibility of new Joystick hardware in the diagnostic screens.
Update Netherlands dealer codes for 50km/h access.
Add Ground speed signal in Dyna-4 4WD and Difflock diagnostic screen.
Add Linkage position signal in Dyna-4 and Dyna-6 Difflock diagnostic screen.
Automatic detection of Pneumatic brake to hide diagnostic screen when not available.
Plug-Ins update for CANUSB new drivers.
Software:

New DCC3 Software v2.9.0 for Dyna-6 and Dyna-4 tractors:
Fix a bug with kickout launch on float request (work with Hydraulic Control Unit v1.5.0), only MF5600.

--------------------------------------------------------------------------------

Release Notes - 7/15/2015 (Update 0167)

EDT NOTES:

EDT Version: 1.72.15063.612


--------------------------------------------------------------------------------

CONTENT UPDATES - Part 1

Vehicles Affected:

Massey Ferguson: 2700e
General:

Initial Release of Diagnostics for the 2700E.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 2

Vehicles Affected:

Challenger: WR9840 (Tier4), WR9840 (LRC), WR9860 (Tier4), WR9860 (LRC), WR9870 (Tier4), WR9870 (LRC)
Massey Ferguson: WR9840 (Tier4), WR9840 (LRC), WR9860 (Tier4), WR9860 (LRC), WR9870 (Tier4), WR9870 (LRC)
General:

Load control bar graph data out of range problem has been fixed.
Header lift and tilt diagnostic screen indicators have been fixed.
Improved high speed guidance performance.
Updated Guidance Profiles for both Sys150 and AG3000.
Updated the Guidance Plug-in to version 2.11.
Updated the AGCO Power Plug-in to version 1.9.
Enabled Waste Gate Actuator.
Updated the AGCOMMAND Plug-in to version 2.1.
Header Lift diagnostic page no longer gives an error when the page is started.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 3

Vehicles Affected:

Massey Ferguson: 3600 Series
Challenger: MT 300 B Series
General:

Model 3630 VSF added.
VSF Models added to Australia/New Zealand/Japan.
Diagnostics:

Release v3.13.
EEM3 plug-in updated v2.5.
Software:

New EEM3 engine software.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 4

Vehicles Affected:

Laverda: AL4 Evolution
Diagnostics:

Vehicle diagnostic content release v1.9.
Updated to latest Plug-Ins.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 5

Vehicles Affected:

Valtra: T-series, N-series
General:

ANT-vehicle v3.2.
Reading tractor information in normal mode.
Updated plug-ins:
AG3000 v2.11, AGI-4 texts replaced with AG3000 Receiver.
C1000 v1.17, added software with downgrading script.
C3000 v3.2, fixed a bug in Network Scan.
EEM3 v2.5, hexfile selected by engine specification number.
Diagnostic Surface:

Traction Control set visible for AC18.4.
Translations:

General update for all languages.
Fault Trees:

Added new service codes, new images and information update.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 6

Vehicles Affected:

Massey Ferguson: 6631
Challenger: 6631
Sunflower: 6631
General:

Updated and added cut width values in EDT script for new 4 gauge gang packages and welded spool changes on 6631 that flashes the implement cut width into the EXT LT EEprom.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 7

Vehicles Affected:

AGCO: Round Balers - 2846,2856
AGCO: Square Balers - 2140, 2150, 2160, 2170, 2190
Challenger: Round Balers - RB46C, RB56C, 2946, 2956
Challenger: Square Balers - LB23B, LB24B, LB33B, LB34B, LB34BXD, LB44B, RB46C, RB56C, 2240, 2250, 2260, 2270, 2270XD, 2290
Fendt: Square Balers - 870, 990, 1270, 1290, 1290XD
Massey Ferguson: Round Balers - 2846, 2856, 2946, 2956
Massey Ferguson: Square Balers - 2140, 2150, 2160, 2170, 2170XD, 2190, 2240, 2250, 2260, 2270, 2270XD, 2290
General:

Updated to support Pro-Cut Cutter.
Fixed some issues with Moisture System communications.
Detected in newtork scan and flash capabliity.
Updated Square Baler module flash script to allow it to distingish between the SBM and Cutter Module.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 8

Vehicles Affected:

Valtra: BE1035e
General:

Vehicle Version 1.1.
C3000 Plugin updated.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 9

Vehicles Affected:

Valtra: BH Series
General:

Vehicle Version 1.12.
C3000 Plugin updated.
PVED_CL Plugin updated.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 10

Vehicles Affected:

Valtra: BM100
General:

Vehicle Version 1.3.
C3000 Plugin updated.
PVED_CL Plugin updated.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 11

Vehicles Affected:

Valtra: BS3020
Massey Ferguson: MF9030
General:

Vehicle Version 1.82.
Released new function – Added Engine Hours Management.
C3000 Plugin updated.
PVED_CL Plugin updated.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 12

Vehicles Affected:

Valtra: BC6800 (SA), BC7800 (SA), BC8800 (SA)
Massey Ferguson: MF9695 (SA), MF9795 (SA), MF9895 (SA)
Challenger: 660B (SA), 670B (SA), 680B (SA)
General:

Vehicle Version 1.3.
Class 8 - ECU Software update - Added Engine Fan Management.
Class 7 - ECU Software update - Added Engine Fan Management.
Class 6 - Release models.
PVED_CL Plugin updated.
Released Fault Tree.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 13

Vehicles Affected:

Massey Ferguson: MF6690
General:

Vehicle Version 2.2.
PVED_CL Plugin Updated.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 14

Vehicles Affected:

Massey Ferguson: MF 2700-4700 Series
General:

Vehicle Version 2.40.
Fixed a bug that prevent to flash a specific Auto7 software.
Changed the description of code J=0 for Auto7 Linkage label code (Add without creeper).

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 15

Vehicles Affected:

Massey Ferguson: MF 6700R Series
General:

Vehicle Version 2.40.
Fixed a bug that prevent to flash a specific Auto5 software.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 16

Vehicles Affected:

Challenger: Legacy combines with AGCO Power Tier3 engines
Fendt: Legacy combines with AGCO Power Tier3 engines
Laverda: Legacy combines with AGCO Power Tier3 engines
Massey Ferguson: Legacy combines with AGCO Power Tier3 engines
Diagnostics:

Release v1.0.
EEM3 Plug-In v2.5.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 17

Vehicles Affected:

Challenger: CH654B, CH658B
Fendt: 8370, 8400, 9470X
Massey Ferguson: 7280, 7282, 9280
Diagnostics:

Vehicle diagnostic content release v1.13.
Updated to latest Plug-Ins.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 18

Vehicles Affected:

Fendt: 8380P, 8380P AL, 8410P, 8410P AL, 9490X, 9490X AL
Massey Ferguson: 7380, 7380 AL, 7382, 7382 AL, 9380, 9380 AL
Software:

EXT: Bios 1.0.4.
Diagnostics:

Release v1.10.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 19

Vehicles Affected:

Challenger: 5300 DynaSwath
Massey Ferguson: 5300 DynaSwath
General:

Modified header diagnostic page to be more user friendly and complete.
Added the option to choose between a single sickle header and a double sickle header.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 20

Vehicles Affected:

Massey Ferguson: 1700 Series
Diagnostics:

Release 1.8.
Updated engine diagnostics.
Software:

New engine software.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 21

Vehicles Affected:

Massey Ferguson: 4600 Series
Diagnostics:

Release 1.7.
Software:

New engine software.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 22

Vehicles Affected:

Massey Ferguson: 8600 Series
Challenger: MT600D Series
AGCO: DTB Series
General:

Vehicle Version 8.0.
Fixed a bug that prevented flashing a specific Auto5 software.
New C3000 Content:
Spring Off-Hold Release of 3.17.306.
Fixed bug with Network Scan never showing "Green" LED.
New AG3000 Content:
Spring Off-Hold Release of 4.1K12p6.
Replaced all occurrences of "AGI-4" text with "AG3000 Receiver".
New EEM4 content:
Solved bug with DEF Dosing Quantity on some engine specifications.
Solved wrong US units on some values.
Added Catalyst Temperature on SCR Process Surface.
Software:

New Linkage Software v2.18.0:
Fixed potential Linkage calibration problem.
New Armrest Software v1.22.0:
Updated ISOBUS.
New C1000 Software v3.0.1.150506:
Updated selectable functions H3/H4.
Fixed engine stopper that always set off on default.
Fixed assignement Multipad/Joystick on some masks.
Fixed the display of Auto Drive mode AUTO.
Fixed display of icons of the setting screen of the Mutlipad (front linkage, rear linkage instead of the valves).
Fixed appearance of LRT diverter popup in the counting setting screen if the hydraulic configuration selected is B or C.
Fixed loss flow setting on 8600 when ignition off with diverter activated.
Fixed hydraulic configuration problem on Challenger LRT in configuration B and C (without Joystick).

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 23

Vehicles Affected:

Challenger: CH652CA
Fendt: 5275CA, 5275CPLA, 6335CA, 6335CPLA
Laverda: M400A, M400LCA, M400LCIA, M410A, M410LCA
Massey Ferguson: 7360A, 7360PLA, 7370A, 7370PLA
Diagnostics:

Vehicle diagnostic content release v1.18.
Updated to latest Plug-Ins.
Added flash package for empty EXT-LT.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 24

Vehicles Affected:

Fendt L-Series 2015: 5255L, 6275L
Fendt C-Series 2015: 5275CA, 5275CPLA, 6335CA, 6335CPLA
Laverda M300 Series 2015: M300A, M310A
Laverda M400 Series 2015: M400A, M400LCA, M400LCIA, M410A, M410LCA
Massey-Ferguson ACTIVA S Series 2015: 7345S, 7347S
Massey Ferguson BETA Series 2015: 7360A, 7360PLA, 7370A, 7370PLA
Diagnostics:

Release v1.6.
Updated EEM4F Plug-In v1.9.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 25

Vehicles Affected:

Challenger: CH644
Fendt: 5220E
Laverda: AL4 Techno, M200
Massey Ferguson: 7244
Diagnostics:

Vehicle diagnostic content release v1.7.
Updated to latest Plug-Ins.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 26

Vehicles Affected:

Challenger: CH645C, CH647C
Fendt: 5255L, 6275L
Laverda: M300, M310
Massey Ferguson: 7345S, 7347S
Diagnostics:

Vehicle diagnostic content release v1.9.
Updated to latest Plug-Ins.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 27

Vehicles Affected:

Challenger: CH648C, CH652C
Fendt: 5275C, 5275CPL, 6335C, 6335CPL
Laverda: M400, M400LC, M400LCI, M410, M410LC
Massey Ferguson: 7360, 7360PL, 7370, 7370PL
Diagnostics:

Vehicle diagnostic content release v1.23.
Updated to latest Plug-Ins.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 28

Vehicles Affected:

Massey Fergusson: MF7100
General:

Vehicle Version 2.6.
C3000 Plugin Updated.
PVED_CL Plugin updated.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 29

Vehicles Affected:

Challenger: MT 700C, MT 800C, MT 900C
General:

Vehicle Version 3.29.
Updated C3000 plug-in to v3.2:
Includes C3000 software version 3.17.206ag.
Updated AG3000 plug-in to v2.11:
Includes AG3000 firmware v4.1K12p6.
Updated C1000 software to version 3.1.2.150416:
Updated Task Controller client.
Fixed AG3000 antenna flash.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 30

Vehicles Affected:

Challenger: MT 700D
General:

Vehicle Version 1.21.
Updated C3000 plug-in to v3.2:
Includes C3000 software version 3.17.206ag.
Updated AG3000 plug-in to v2.11:
Includes AG3000 firmware v4.1K12p6.
Updated C1000 software to version 3.1.2.150416:
Updated Task Controller client.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 31

Vehicles Affected:

Challenger: MT 700E, MT 800E, MT 900E
General:

Vehicle Version 2.6.
Updated MT 700E EPA engine software to v1.0.2 Rev. 0:
More robust diagnostics.
Improved performance in cold temperature conditions.
Removed invalid boost pressure code SPN102-FMI12.
Removed Fan error codes when ignition is OFF.
Updated C3000 plug-in to v3.2:
Includes C3000 software version 3.17.206ag.
Updated AG3000 plug-in to v2.11:
Includes AG3000 firmware v4.1K12p6.
Updated C1000 software to version 3.1.2.150416:
Updated Task Controller client.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 32

Vehicles Affected:

Challenger: 520C, 530C, 540C, 540E, 550C, 560C, 560E
Massey Ferguson: 9520, 9530, 9540, 6545, 9550, 9560, 9565
General:

Updated AG3000 and C3000 plug-ins.
Fixed Cleaning Shoe screen numbering.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 33

Vehicles Affected:

Massey Ferguson: MF5xx, MF7xx
Valtra: HiTech, Frontier
General:

Vehicle Version 1.0.
New Release – Brazilian Planters.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 34

Vehicles Affected:

Challenger: RG 900, RG 1100, RG 1300
RoGator: RG 900, RG 900B, RG 1100, RG 1100B, RG 1300, RG 1300B
General:

Vehicle Version 1.17.
Updated C3000 plug-in to v3.2:
Includes C3000 software version 3.17.206ag.
Updated AG3000 plug-in to v2.11:
Includes AG3000 firmware v4.1K12p6.
Updated EPA engine software to version 1.0.2 Rev. 0:
More robust diagnostics.
Improved performance in cold temperature conditions.
Updated Norac UC5 software to version 4.8.1.1:
Performance improvements and bug fixes.
Updated C1000 software to version 3.1.2.150512:
Improvements and bug fixes related to Raven SmarTrax and four wheel steer (4WS) interaction. See software package details for more information.
Fixed fuel rate per hour bug.
Updated 4WS software to version 2.0:
Tightened tolerance for control of rear axle.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 35

Vehicles Affected:

Challenger: RG600
General:

Vehicle version 3.2.
Update to new OEM odx/dll files.
Updated Plug-in:
C3000 Terminal v3.2.
Calibration:

Added "Zero Point Calibration of Steer Angle Sensor(s)" in case the Steer Angle Sensors are mounted at the top of the corner module.
Configuration:

"Read/Change Vehicle Configuration": The Steer Sensor mounting position (top/bottom on corner module) is adjustable (starting from ECU Chassis software version CHS_01.10.zip).
Software:

Update software ECU Chassis (CHS_01.10.zip) (Note: is only compatible with CONS_01.09.zip and BIN_01.09.zip).
Update Norac software (E2UC5-UP4_8_1_4).
Update C3000 software (X30_AGCO_v3.17.306agco_rel_full_up).

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 36

Vehicles Affected:

Challenger: RG700, RG700B
RoGator: RG700, RG700B
General:

Vehicle Version 2.7.
Updated C3000 plug-in to v3.2:
Includes C3000 software version 3.17.206ag.
Updated AG3000 plug-in to v2.11:
Includes AG3000 firmware v4.1K12p6.
Updated RG700B EPA engine software to version 1.0.2 Rev. 3:
More robust diagnostics.
Improved performance in cold temperature conditions.
Updated Norac UC5 software to version 4.8.1.1:
Performance improvements and bug fixes.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 37

Vehicles Affected:

Gleaner: R65, R66, R75, R76
General:

Updated EEM3 and C3000 plugins.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 38

Vehicles Affected:

Challenger: 660B, 670B, 680B
Fendt: 9300R, 9350R, 9460R
Gleaner: A66, A76, A86
Laverda: ML700, ML800
Massey Ferguson: 9695, 9795, 9895
General:

Corrected misspelled word on software flash tab.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 39

Vehicles Affected:

Valtra: S3 and S4 Series
General:

Vehicle Version 6.10.
Fixed a bug that prevent to flash a specific Auto5 software.
New steering parameter for PVED-CL setting. TwinTrac steering is improved. Rear QuickSteer values also adjusted.
New C1000 content:
CCD Version 3.0.1 available.
New C3000 Content:
Spring Off-Hold Release of 3.17.306.
Fixed bug with Network Scan never showing "Green" LED.
New AG3000 Content:
Spring Off-Hold Release of 4.1K12p6.
Replaced all occurrences of "AGI-4" text with "AG3000 Receiver".
New EEM4 content for S3 Tier4i tractors:
Solved bug with DEF Dosing Quantity on some engine specifications.
Solved wrong US units on some values.
Added Catalyst Temperature on SCR Process Surface.
New EEM4F Content for S4 Tier4F tractors:
Solved bug with DEF Dosing Quantity on Oscilloscope SCR System.
Solved wrong US units on some values.
Hid some combines values displayed for the tractors before.
Software:

New Dashboard IC1 Software v2.6.0 for S4 tractors:
Management of Automatic Difflock.
New Linkage Software v1.13.0 for S4 tractors:
Fixed potential Linkage calibration problem.
New Linkage Software v2.18.0 for S3 tractors:
Fixed potential Linkage calibration problem.
New Cab suspension Software v1.8.0:
Fixed bug with regulation > 1kph.
New Auto5 - ISO Software v1.22.0:
Update ISOBUS.
ISOBUS Valtra, Fix flashing light and light bar.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 40

Vehicles Affected:

Gleaner: S67, S77
General:

Updated AG3000 and C3000 plugins.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 41

Vehicles Affected:

Gleaner: S68, S78, S88
General:

Updated AG3000 and C3000 plugins.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 42

Vehicles Affected:

Massey Ferguson: T7
General:

Added T7 Vehicle to Russian Region.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 43

Vehicles Affected:

Challenger: TerraGator 8333
General:

Vehicle version 2.5.
Update to new OEM odx/dll files.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 44

Vehicles Affected:

Challenger: TG 8300, TG 8300B
TerraGator: TG 7300, TG 7300B, TG 8300, TG 8300B, TG 8400, TG 8400B, TG 9300, TG 9300B
General:

Vehicle Version 1.27.
Updated EPA engine software to version 1.0.2 Rev. 0:
More robust diagnostics.
Improved performance in cold temperature conditions.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 45

Vehicles Affected:

Challenger: TG 835
General:

Vehicle version 1.6.
Update to new OEM odx/dll files.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 46

Vehicles Affected:

Challenger: TG 845
General:

Vehicle version 1.4
Update to new OEM odx/dll files.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 47

Vehicles Affected:

Valtra: T4-series
General:

VT11 vehicle v1.20.
Basic Control models AC26.51 and AC27.51 added.
Initial release of N4 series models.
New AC26.5 Hitech tractors added.
Query of front hydraulics removed if front PTO was selected.
Reading tractor information in normal mode.
Updated plug-ins:
AG3000 v2.11, AGI-4 texts replaced with AG3000 Receiver.
C1000 v1.17, added software with downgrading script.
C3000 v3.2, fixed a bug in Network Scan.
LHLink v2.0, updated pictures on select connection page.
Diagnostic Surface:

AUTO HVAC function and diagnostic pages added for air conditioning.
Names of Difflock and Aux Hydraulic functions fixed.
Calibration:

Rear Linkage Setpoint tool for Basic Control models.
Configuration:

Name of the tool Reset TC1 indexes with default values renamed.
Place of Hydraulic configuration tool changed.
Fault Trees:

Update for all T4 models.
Translations:

Initial translation versions for all existing languages.
Software:

AC24.5 (1.2.0.0):
New software for Transmission Controller, Pillar Displays, I/O 1, I/O 2, Armrest Controller and Tractor Color Terminal.
AC25.5 (1.2.0.0):
New software for Transmission Controller, Pillar Displays, I/O 1, I/O 2, Armrest Controller and Tractor Color Terminal.
AC26.5 AC27.5 (1.2.0.0):
New software for Transmission Controller, I/O 1, I/O 2 and Armrest Controller.
Own parameter file of transmission control unit for N104H.
SECU (1.4.0.0):
Correction of software selection between front and rear quick steering.
EEM4f engine software hex-files for N4 and T4 tractors:
Fixes the DEF level in A-pillar display.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 48

Vehicles Affected:

Massey Ferguson: MF 5600 Series
General:

Vehicle Version 3.70.
Fixed a bug that prevent to flash a specific Auto5 software.
New EEM4 content:
Solved bug with DEF Dosing Quantity on some engine specifications.
Solved wrong US units on some values.
Added Catalyst Temperature on SCR Process Surface.
Software:

New Linkage Software v2.18.0 for Dyna-6 and Dyna-VT tractors:
Fixed potential Linkage calibration problem.
New TECU Software v1.22.0:
Updated ISOBUS.
Fixed parameter loss of the front axle suspension.
New C1000 Software v3.0.1.150506:
Updated selectable functions H3/H4.
Fixed engine stopper that always set off on default.
Fixed assignement Multipad/Joystick on some masks.
Fixed display of Auto Drive mode AUTO.
Fixed random malfunction of the automatic setting of the valves (7600).
Fixed display of icons of the setting screen of the Mutlipad (front linkage, rear linkage instead of the valves).
Fixed appearance of LRT diverter popup in the counting setting screen if the hydraulic configuration selected is B or C.
Fixed appearance of the diverter symbol on valve 1 in hydraulic configuration C on 7600 (no diverter on 7600).

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 49

Vehicles Affected:

Massey Ferguson: MF 8700 Series
Challenger: MT600E Series
General:

Vehicle Version 3.30.
Fixed bug with the range switch diagnostic on the T-handle.
Fixed bug that prevented flash to specific Auto5 software.
Fixed an incorrect display of distributor 4 and 6 hydraulic flow on hydraulic diagnostic screen.
Change the picture for Gearbox, Front axle suspension, Linkage and PTO Overview.
Integration of Help files link in the diagnostic screen.
New C3000 Content:
Spring Off-Hold Release of 3.17.306.
Fixed bug with Network Scan never showing "Green" LED.
New AG3000 Content:
Spring Off-Hold Release of 4.1K12p6.
Replaced all occurrences of "AGI-4" text with "AG3000 Receiver".
New EEM4F Content: :
Solved bug with DEF Dosing Quantity on Oscilloscope SCR System.
Solved wrong US units on some values.
Hid some combines values displayed for the tractors before.
Software:

New Linkage Software v1.13.0:
Fixed potential Linkage calibration problem.
New Dashboard IC1 Software v2.8.0:
Safe mode management for H3/H4 in loader mode.
New TECU Software v1.22.0:
Updated ISOBUS.
New C1000 Software v3.0.1.150506:
Safe mode management H3/H4 in charger mode.
Updated selectable functions H3/H4.
Fixed engine stopper that always set off on default.
Fixed assignement Multipad/Joystick on some masks.
Fixed the display of Auto Drive mode AUTO.
Fixed display of icons of the setting screen of the Mutlipad (front linkage, rear linkage instead of the valves).
Fixed appearance of LRT diverter popup in the counting setting screen if the hydraulic configuration selected is B or C.
Fixed hydraulic configuration problem on Challenger LRT in configuration B and C (without Joystick).

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 50

Vehicles Affected:

Massey Ferguson: MF 7700 Series
Challenger: MT500E Series
Iseki: i7700 Series
General:

Vehicle Version 1.20.
Added possibility to diagnose the range switch when T-handle on short console.
Fixed a bug that prevent to flash a specific Auto5 software.
Fixed keyboard connector name on PTO diagnostic screen.
Integration of Help files link in the diagnostic screen.
New C3000 Content:
Spring Off-Hold Release of 3.17.306.
Fixed bug with Network Scan never showing "Green" LED.
New AG3000 Content:
Spring Off-Hold Release of 4.1K12p6.
Replaced all occurrences of "AGI-4" text with "AG3000 Receiver".
New EEM4F Content:
Solved bug with DEF Dosing Quantity on Oscilloscope SCR System.
Solved wrong US units on some values.
Hid some combines values displayed for the tractors before.
Fixed the displaying of Throttle valve signals in the Air system screen.
Software:

New Linkage Software v1.7.0 for Dyna-6 and Dyna-VT:
Fixed potential Linkage calibration problem.
New Dashboard IC1 Software v2.8.0:
Safe mode management for H3/H4 in loader mode.
New TECU Software v1.4.0:
Fixed the return of the Finger Tips calibration on the CAN Network.
New Dyna-6 Transmission Software v1.3.0:
Fixed clogging LED lighting.
Management of H3/H4 on Mechanical loader.
New Engine software for MF7726 Dyna-6 and MT595E:
Fixed a wrong specification number.
New Engine Software for MF7719, MF7720 and MT555E, MT565E:
Optimization of the power.
New C1000 Software v3.0.1.150506:
Safe mode management H3/H4 in charger mode.
Updated selectable functions H3/H4.
Fixed engine stopper that always set off on default.
Fixed assignement Multipad/Joystick on some masks.
Fixed the display of Auto Drive mode AUTO.
Fixed display of icons of the setting screen of the Mutlipad (front linkage, rear linkage instead of the valves).
Fixed appearance of LRT diverter popup in the counting setting screen if the hydraulic configuration selected is B or C.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 51

Vehicles Affected:

Massey Ferguson: MF 6600 Series
Challenger: MT400D Series
Iseki: i6600 Series
General:

Vehicle Version 7.70.
Fixed a bug that prevent to flash a specific Auto5 software.
New C3000 Content:
Spring Off-Hold Release of 3.17.306.
Fixed bug with Network Scan never showing "Green" LED.
New AG3000 Content:
Spring Off-Hold Release of 4.1K12p6.
Replace all occurrences of "AGI-4" text with "AG3000 Receiver".
New EEM4 content:
Solved bug with DEF Dosing Quantity on some engine specifications.
Solved wrong US units on some values.
Added Catalyst Temperature on SCR Process Surface.
Software:

New Linkage Software v2.18.0 for Dyna-6 and Dyna-VT tractors:
Fixed potential Linkage calibration problem.
New TECU Software v1.22.0:
Updated ISOBUS.
Fixed parameter loss of the front axle suspension.
New C1000 Software v3.0.1.150506:
Updated selectable functions H3/H4.
Fixed engine stopper that always set off on default.
Fixed assignement Multipad/Joystick on some masks.
Fixed the display of Auto Drive mode AUTO.
Fixed random malfunction of the automatic setting of the valves (7600).
Fixed display of icons of the setting screen of the Mutlipad (front linkage, rear linkage instead of the valves).
Fixed appearance of LRT diverter popup in the counting setting screen if the hydraulic configuration selected is B or C.
Fixed appearance of the diverter symbol on valve 1 in hydraulic configuration C on 7600 (no diverter on 7600).

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 52

Vehicles Affected:

Massey Ferguson: MF 7600 Series
Challenger: MT500D Series
Iseki: i7600 Series
General:

Vehicle Version 7.70.
Fixed a bug that prevent to flash a specific Auto5 software.
Added an option in the DCC3 label codes options to enable the new Vistronic Kit that will be available.
New C3000 Content:
Spring Off-Hold Release of 3.17.306.
Fixed bug with Network Scan never showing "Green" LED.
New AG3000 Content:
Spring Off-Hold Release of 4.1K12p6.
Replaced all occurrences of "AGI-4" text with "AG3000 Receiver".
New EEM4 content:
Solved bug with DEF Dosing Quantity on some engine specifications.
Solved wrong US units on some values.
Added Catalyst Temperature on SCR Process Surface.
Software:

New Linkage Software v2.18.0 for Dyna-6 and Dyna-VT tractors:
Fixed potential Linkage calibration problem.
New TECU Software v1.22.0:
Updated ISOBUS.
Fixed parameter loss of the front axle suspension.
New C1000 Software v3.0.1.150506:
Updated selectable functions H3/H4.
Fixed engine stopper that always set off on default.
Fixed assignement Multipad/Joystick on some masks.
Fixed the display of Auto Drive mode AUTO.
Fixed random malfunction of the automatic setting of the valves (7600).
Fixed display of icons of the setting screen of the Mutlipad (front linkage, rear linkage instead of the valves).
Fixed appearance of LRT diverter popup in the counting setting screen if the hydraulic configuration selected is B or C.
Fixed appears of the diverter symbol on valve 1 in hydraulic configuration C on 7600 (no diverter on 7600).

--------------------------------------------------------------------------------

Release Notes - 6/29/2015 (Update 0165)

EDT NOTES:

EDT Version: 1.72.15063.612


--------------------------------------------------------------------------------

CONTENT UPDATES - Part 1

Vehicles Affected:

Valtra: T-Series, N-Series, A-Series
General:

Vehicle Version 3.1.
Fault codes not doubled anymore.
Fixed the script that allows to program spare part TC unit for A3.
Index min and max values visible in adjustment window.
TC index 504 fixed.
Updated plug-ins:
AGCOMMAND v2.1:
support for diagnostics.
C3000 v3.1:
Fixed incorrect flash step.
Fixed a bug which caused dll error.
Added comparison for old and new hardware.
EEM4i v4.7
Solved NOx sensor mismatch.
Software:

AC15.34 (2.3.0.1) CACHT parameter file changed.
AC16.0 (2.2.1.0) Fixed TC parameter file for HT3 tractors.
AC16.2 (2.2.1.0) Fixed TC parameter file for HT3 tractors.
AC16.3 (2.2.1.0) Fixed TC parameter file for HT3 tractors.
AC18.0 (2.2.1.0) Fixed TC parameter file for HT3 tractors.
AC18.4 (2.2.1.0) Fixed TC parameter file for HT3 tractors.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 2

Vehicles Affected:

AGCO
Round Balers: 2846, 2856
Square Balers: 2140, 2150, 2160, 2170, 2190
Challenger
Round Balers: RB46C, RB56C, 2946, 2956
Square Balers: LB23B, LB24B, LB33B, LB34B, LB34BXD, LB44B, 2240, 2250, 2260, 2270, 2270XD, 2290
Fendt
Square Balers: 870, 990, 1270, 1290, 1290XD, 12130
Massey Ferguson
Round Balers: 2846, 2856, 2946, 2956
Square Balers: 2140, 2150, 2160, 2170, 2170XD, 2190, 2240, 2250, 2260, 2270, 2270XD, 2290
General:

Changed C1000 Plug-in to version 1.16. This change allows the system to properly upload the C1000 version 3.0.1 to a flash drive.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 3

Vehicles Affected:

Valtra: BE1035e (Sugar Cane Harvester)
General:

Vehicle Version 1.0.
New Release.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 4

Vehicles Affected:

Massey Ferguson: 7350, 7370, 7390, 7415
Valtra: BT150, BT170, BT190, BT210
General:

Vehicle Version 4.2.
New C3000 Content:
Fixed bug that blocked the download of the software in the terminal (Windows Administrator user access is now a requirement to update C3000s).

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 5

Vehicles Affected:

Massey Ferguson: MF 2700-4700 Series
General:

Vehicle Version 2.30.
Review of all the diagnostic screens.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 6

Vehicles Affected:

Massey Ferguson: MF 6700R Series
General:

Vehicle Version 2.30.
Fixed bug with the Auto5 Flash than can display to re-enter the label codes while it is not needed.
New C3000 Content:
Fixed bug that blocks the download of the software in the terminal (Windows Administrator user access is now a requirement to update C3000s).

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 7

Vehicles Affected:

Challenger: MT600 C Series, MT600 D Series
Massey Ferguson: 8600 Series
General:

Vehicle Version 7.90.
Fixed bug with the Auto5 Flash than can display to re-enter the label codes while it is not needed.
Modification of the turning brakes now available in the EXT Parameters in North America for Dyna-VT tractors.
Fixed connector name X49 and X50 on Suspended Cab Overview diagnostic screen.
Fixed help file link to X49 and X50 on suspended Cab diagnostic screen.
Fixed bug in Overview Cab suspension diagnostic:
At the end of a calibration the signals were no longer responding.
New C3000 Content:
Fixed bug that blocked the download of the software in the terminal (Windows Administrator user access is now a requirement to update C3000s).
Software:

New DCC3 Software v2.7.0

Modification of the turning brakes now available in the DCC Parameters only in North America.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 8

Vehicles Affected:

Challenger: MT700 C, MT800 C, MT900 C
General:

Vehicle Version 3.28.
Updated C3000 plug-in to v3.1:
Fix bug where elevate.exe caused dll error. (Windows Administrator user access is now a requirement to update C3000s).
Reverted Lighting Module software back to previous v3.36.0:
v3.37.0 did not resolve intended bug.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 9

Vehicles Affected:

Challenger: MT 700D Series
General:

Vehicle Version 1.20.
Updated C3000 plug-in to v3.1:
Fixed bug where elevate.exe caused dll error. (Windows Administrator user access is now a requirement to update C3000s).
Reverted Lighting Module software back to previous v3.36.0:
v3.37.0 did not resolve intended bug.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 10

Vehicles Affected:

Challenger: MT 700E, MT 800E, MT 900E
General:

Vehicle Version 2.5.
Updated C3000 plug-in to v3.1:
Fix bug where elevate.exe caused dll error. (Windows Administrator user access is now a requirement to update C3000s).
Reverted Lighting Module software back to previous v3.36.0:
v3.37.0 did not resolve intended bug.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 11

Vehicles Affected:

Challenger: 520C, 530C, 540C, 550C, 560C
Fendt: 9390R, 9450R, 9480R
Massey Ferguson: 9520, 9530, 9540, 9550, 9560
General:

Updated EEM4F plugin and engine files for the Class 7 and 8 combines.
Updated C3000 Plugin.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 12

Vehicles Affected:

AGCO: 8100, 8200, 8300, 8500, 8700, 8800 Planters
General:

Fixed Africa region issue and console selection for AGCO branded planters.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 13

Vehicles Affected:

Rogator: RG 900, RG 1100, RG 1300
Challenger: RG 900, RG 1100, RG 1300
General:

Vehicle Version 1.15.
Updated C3000 plug-in to v3.1:
Fix bug where elevate.exe caused dll error. (Windows Administrator user access is now a requirement to update C3000s).
Updated Headlight & Chassis ECU software version to v7.0:
See software flash package for details.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 14

Vehicles Affected:

Challenger: RG600
General:

Vehicle Version 3.1.
Updated Plug-in:
C3000 Terminal v3.1.
Software:

Update software ECU Sprayer (BIN_01.09.zip). (Note: is only compatible with CONS_01.09.zip and CHS_01.09.zip)
Update software ECU Chassis (CHS_01.09.zip). (Note: is only compatible with CONS_01.09.zip and BIN_01.09.zip)
Update software ECU Suspension/4WS. (Challenger2v149.mhx)

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 15

Vehicles Affected:

Challenger: RG700, RG700B
RoGator: RG700, RG700B
General:

Vehicle Version 2.5.
Updated C3000 plug-in to v3.1:
Fixed bug where elevate.exe caused dll error. (Windows Administrator user access is now a requirement to update C3000s).
Updates RG700B EPA engine software to version 1.0.2 Rev.2:
Fixes grid heater bug.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 16

Vehicles Affected:

Gleaner: R65, R75, R66, R76
General:

Updated C3000 Plugin.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 17

Vehicles Affected:

Challenger: 660B, 670B, 680B
Fendt: 9300R, 9350R, 9460R
Gleaner: A66, A76, A86
Laverda: ML700, ML800
Massey Ferguson: 9695, 9795, 9895
General:

Added vehicle to model map: Fendt 9460R available in Western Europe.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 18

Vehicles Affected:

Valtra: S3 and S4 Series
General:

Added components number in the gearbox diagnostic screen.
Added signal for tractor direction/speed on gearbox diagnostic screen.
Added brake pedal signal in gearbox Auto-Mode diagnostic screen.
Added power-assisted steering setting potentiometer signal in the Twin Track diagnostic screen.
Fixed bug with the Auto5 Flash than can display to re-enter the label codes while it is not needed.
New C3000 Content:
Fix a bug that blocks the download of the software in the terminal (Windows Administrator user access is now a requirement to update C3000s).

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 19

Vehicles Affected:

Gleaner: S67, S77
General:

Updated C3000 Plugin.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 20

Vehicles Affected:

Gleaner: S68, S78, S88
General:

Updated EEM4F plugin and engine files for all models.
Updated Fan Pitch Controller software.
Updated C3000 plugin.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 21

Vehicles Affected:

Massey Ferguson: T7
General:

Updated EEM4F plugin and engine files for 2014 and newer T7.
Updated EIP software.
Updated Fan Pitch Controller software.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 22

Vehicles Affected:

Valtra: T4-Series
General:

Vehicle Version 1.14.
Fixed bug in a Visco test page.
Index min and max values visible in adjustment window.
TC index 504 fixed.
Updated plug-ins:
C3000 v3.1:
Fixed a bug which caused dll error.
EEM4_Diagnostic v1.9:
Added new functionality.
Software:

AC27.5 (1.1.1.0):
Improved software for Pillar display.
SECU (1.3.0.0):
Bug fixing and improvements.
Diagnostic Surface:

Rear linkage buttons Up and Down changed.
Place of cruise buttons 1 and Off changed.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 23

Vehicles Affected:

Challenger: WR9725, WR9740 (Tier2/4), WR9760 (Tier2/4), WR9770 (Tier2/4)
Massey Ferguson: WR9725, WR9740 (Tier2/4), WR9760 (Tier2/4), WR9770 (Tier2/4)
General:

Main Controller Flash - This software fixes the AG3000 guidance engagment issue.
Authorized Access - No longer recive an error message when cancelling
Guidance Profiles - There are now 2 guidance profiles. One for AG3000 and one for Sys 150. The Sys 150 profile (WR97xx.ini) contains only the basic geometry; while the AG3000 profile contains additional settings that the C3000 uses. Both have updated geometry.
C1000 Plug-in - Change the release date to match actual.
EEM4 Plug-in update - Updated to the new EEM4 Plug-in (version 4.7). This also added the functionallity to check the engine spec before flashing which windrowers is taking advantage of.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 24

Vehicles Affected:

Massey Ferguson: 5600 Series
General:

Vehicle Version 3.60.
Fixed bug that crashed EDT in case of ECU not detected before label codes setting.
Fixed bug with the armrest configuration that did not allow you to configure the Armrest.
Improved the refresh of the PTO and light buttons in the Keyboard configuration screen.
Fixed bug with the Auto5 Flash than can display to re-enter the label codes while it is not needed.
Software:

New DCC3 Software v2.8.0 for Dyna-6 and Dyna-4 tractors:
Fixed bug with a hydraulic memory request when seat switch is not connected (work with Hydraulic Control Unit v1.4.0).
New Hydraulic Control Unit Software v1.4.0 for MF5611-5612-5613 tractors:
Fixed bug with a hydraulic memory request when seat switch is not connected (work with DCC3 v2.8.0).

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 25

Vehicles Affected:

Challenger: MT600E Series
Massey Ferguson: 8700 Series
General:

Vehicle Version 2.20.
Improved the refresh of the PTO and light buttons in the Keyboard configuration screen.
Fixed displaying the latest version available of the dashboard software on the network summary screen for North America.
Fixed bug with the suppression of Dashboard stored error codes.
Fixed bug with the Auto5 Flash than can display to re-enter the label codes while it is not needed.
Modification of the turning brakes now available in the EXT Parameters in North America for Dyna-VT tractors.
Fixed connector name X49 and X50 on Suspended Cab Overview diagnostic screen.
Fixed help file link to X49 and X50 on suspended cab diagnostic screen.
Fixed bug in Overview Cab suspension diagnostic:
At the end of a calibration the signals were no longer responding.
New C3000 Content:
Fixed bug that blocked the download of the software in the terminal (Windows Administrator user access is now a requirement to update C3000s).

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 26

Vehicles Affected:

Challenger: MT500 E Series
Iseki: i7700 Series
Massey Ferguson: 7700 Series
General:

Vehicle Version 1.10.
Improved refreshing of the PTO and light buttons in the keyboard configuration screen.
Added armrest configuration which is usefull when changing the Armrest PCB card.
Fixed bug with the suppression of dashboard stored error codes.
Fixed bug with the Auto5 Flash than can display to re-enter the label codes while it is not needed.
Modification of the turning brakes now available in the EXT Parameters in North America for Dyna-VT tractors.
Added the ability to flash a specific engine software.
New C3000 Content:
Fixed bug that blocked the download of the software in the terminal (Windows Administrator user access is now a requirement to update C3000s).
Software:

New Dashboard IC1 Software v2.6.0 for Dyna-6 and Dyna-4 tractors:
No deactivation of tractor functions on H3/H4 when the loader is active:
Tractor functions affected to H3/H4 working in the same time as loader function on H3/H4.
Fixed bug with the Memo A function in Linkage mini Headland function.
In simple Creeper mode and Autodrive active, maximum gear is now 2F (bug fixing).
Removed ability to assign C1/C2 to H3/H4 on Long console tractors.
New Dashboard IC1 Software v2.6.0 for Dyna-VT tractors:
No deactivation of tractor functions on H3/H4 when the loader is active:
Tractor functions affected to H3/H4 working in the same time as loader function on H3/H4.
Fixed bug with the Memo A function in Linkage mini Headland function.
No more the possibility to affect C1/C2 speed upper than the maximum speed.
Fixed bug with the alarm of the auxiliary hydraulic level.
New Engine Software for all MF7700 and MT500E tractors:
Power adjustment.
Improve starting time when cold coolant temperature.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 27

Vehicles Affected:

Challenger: MT400 D Series
Iseki: i6600 Series
Massey Ferguson: 6600 Series
General:

Vehicle Version 7.60.
Fixed bug that crashed EDT in case of ECU not detected before label codes setting.
Fixed bug with Iseki VIN setting when The Auto5 TECU was previously blanked.
Fixed bug with the armrest configuration that did not allow you to configure the Armrest.
Fixed bug with the PTO diagnostic that can crash EDT if you have a tractor with mechanical PTO speed selection.
Improved the refresh of the PTO and light buttons in the Keyboard configuration screen.
Fixed bug with the Auto5 Flash than can display to re-enter the label codes while it is not needed.
Modification of the turning brakes now available in the EXT Parameters in North America for Dyna-VT tractors.
New C3000 Content:
Fix a bug that blocked the download of the software in the terminal (Windows Administrator user access is now a requirement to update C3000s).
Software:

New DCC3 Software v2.8.0 for Dyna-6 and Dyna-4 tractors:
Fixed bug with a hydraulic memory request when seat switch is not connected (work with Hydraulic Control Unit v1.4.0), only MF5600.
New DCC3 Software v2.9.0 for Dyna-VT tractors:
Modification of the turning brakes now available in the DCC Parameters only in North America.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 28

Vehicles Affected:

Challenger: MT500 D Series
Iseki: i7600 Series
Massey Ferguson: 7600 Series
General:

Vehicle Version 7.60.
Fixed bug that crashed EDT in case of ECU not detected before label codes setting.
Fixed bug with Iseki VIN setting when The Auto5 TECU was previously blanked.
Fixed bug with the armrest configuration that did not allow you to configure the Armrest.
Fixed bug with the PTO diagnostic that can crash EDT if you have a tractor with mechanical PTO speed selection.
Improved the refresh of the PTO and light buttons in the Keyboard configuration screen.
Fixed bug with the Auto5 Flash than can display to re-enter the label codes while it is not needed.
Modification of the turning brakes now available in the EXT Parameters in North America for Dyna-VT tractors.
Added model availability:
MF 7624 Dyna-VT and MF 7614 Dyna-4 Tier2 in South America.
MF 7624 Dyna-VT Tier2 in Asia.
MF 7626 Dyna-6 Tier2 In New Zealand.
New C3000 Content:
Fixed bug that blocked the download of the software in the terminal (Windows Administrator user access is now a requirement to update C3000s).
Software:

New DCC3 Software V2.8.0 for Dyna-6 and Dyna-4 tractors:
Fixed bug with a hydraulic memory request when seat switch is not connected (work with Hydraulic Control Unit V1.4.0), only MF5600.
New DCC3 Software V2.9.0 for Dyna-VT tractors:
Modification of the turning brakes now available in the DCC Parameters only in North America.

--------------------------------------------------------------------------------

Release Notes - 3/18/2015 (Update 0161)

EDT NOTES:

EDT Version: 1.72.15063.612

EDT:
The Gleaner branding has been updated to match current product branding guidelines.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 1

Vehicles Affected:

Challenger: WR9860, WR9870
Massey Ferguson: WR9860, WR9870
General:

Added the LRC models and engine files.
Update AG300:
Fixed bug with Wiring Diagram button on AGI-4 Inputs/Outputs Page.
Updated AGI-4 Software.
Update System 150:
Included steering and vehicle profiles.
Updated the Turbo Actuator flash.
Enabled the Wheel Motors/Drive Pump diagnostic surface.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 2

Vehicles Affected:

ATS: AGCOMMAND (Universal Kit Support)
General:

Added support for AM53 and CDMA.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 3

Vehicles Affected:

Valtra: T-Series, N-Series
General:

Vehicle Version 2.96.
Added reminder before software package download.
Names of indexes and fault codes updated.
New fault codes added to robot calibration.
New features and analog outputs added to I/O test.
Tests for multidisc clutches removed:
Not functional with AUTO calibration software.
Turbine clutch in tractor question removed from N143H LRC.
Updated plug-ins:
AGCOMMAND v2.1, support for AM53 and CDMA diagnostic.
C3000 v3.0, powerboard software flash.
EEM3 v2.3, spec number vs. hexfile comparison.
EEM4i v4.7, solved mixed NOx values.
Diagnostic Surface:

AutoControl switch fixed on Lock De-Activation page.
PTO sigma page visibility fixed for Versu / Direct.
FI02 (B30) signal added to Power Shuttle page for Hitech.
Calibrations:

Automatic Calibrations removed from N2/T2.
Manual Calibrations removed from N3/T3.
Software:

EEM4 engine software 1.5.0 for LRC tractors:
Fixed hex –files for T153V, N143H3 and N123H3.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 4

Vehicles Affected:

AGCO
Round Balers: 2846, 2856
Square Balers: 2140, 2150, 2160, 2170, 2190, 2846, 2856
Challenger
Round Balers: RB46C, RB56C
Square Balers: LB23B, LB24B, LB33B, LB34B, LB34BXD, LB44B, RB46C, RB56C
Fendt
Square Balers: 870, 990, 1270, 1290, 1290XD
Massey Ferguson
Round Balers: 2846, 2856
Square Balers: 2140, 2150, 2160, 2170, 2170XD, 2190, 2846, 2856
General:

Updated vehicle version to 4.10.
Updated Square Baler software to version 3.60.
Updated C1000 to plugin 1.15.
Software:

Chain oiler on time set to 15 Seconds.
Chain oiler cycle time defaults to 30 Seconds with a minimum of 20.
Changed text from "Harvest Tec" to "Moisture System".
Moved "Stuffer Lockout" variable to 658 passcode screen.
4 Flakes must be added between manual electric knotter trips.
Release valve now turns off after aborting decompression cycle.
Added Portuguese language support.
Fixed cutter calibration and display.
Changed Solenoid Max On Time to 1750 for 3x3/3x4 and 2750 for 4x4.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 5

Vehicles Affected:

Valtra: BH135, BH145, BH165, BH185, BH200
General:

Vehicle Version 1.11.
AG3000 Plug-in updated.
C3000 Plug-in updated.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 6

Vehicles Affected:

Valtra: BM100
General:

Vehicle Version 1.2.
AG3000 Plug-in updated.
C3000 Plug-in updated.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 7

Vehicles Affected:

Massey Ferguson: MF9030
Valtra: BS3020H
General:

Vehicle Version 1.81.
AG3000 Plug-in updated.
C3000 Plug-in updated.
New ECU software package released (3.0.0.0) for machines with pump’s neutral sensor.
Added Configuration - Engine Hours Management.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 8

Vehicles Affected:

Challenger: MT540, MT560, MT570, MT580
Massey Ferguson: 7350, 7370, 7390, 7415
Valtra: BT150, BT170, BT190, BT210
General:

Vehicle Version 4.1.
New C3000 content:
Added Powerboard software flash - version 2.05.
It is not required to run EDT as administrator to export software to USB.
Fixed incorrect flash step.
New AGCOMMAND content:
Added AM53 support.
Updated Network provider list.
Added CDMA diagnostic.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 9

Vehicles Affected:

Challenger: 670B(SA), 680B(SA)
Massey Ferguson: MF9795(SA), MF9895(SA)
Valtra: BC7800(SA), BC8800(SA)
General:

Vehicle Version 1.2.
AG3000 Plug-in updated.
C3000 Plug-in updated.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 10

Vehicles Affected:

Massey Ferguson: MF 6690
General:

Vehicle Version 2.1.
AG3000 Plug-in updated.
C3000 Plug-in updated.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 11

Vehicles Affected:

Massey Ferguson: MF 2700-4700 Series
General:

Vehicle Version v2.20.
Update of parameters and label codes following the new software.
New AGCOMMAND content:
Added AM53 support.
Updated Network provider list.
Added CDMA diagnostic.
Software:

New Dashboard Software v1.40:
Introduction of label codes setting with the Dashboard.
New Transmission Software v2.4.0:
Compatibility with the new function of label code setting with the Dashboard.
New Linkage Software v1.6.0:
Compatibility with the new function of label code setting with the Dashboard.
Compatibility with new products.
Fixed a bug with the code AA.
New label code I and H.
Modification of label code E.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 12

Vehicles Affected:

Massey Ferguson: MF 6700R Series
General:

Vehicle Version 2.20.
Initial release.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 13

Vehicles Affected:

FELLA: SM8312, SM9314
Massey Ferguson: DM 1399
General:

Massey Ferguson model support.
Field pressure control.
Front mower monitoring.
Software:

Version 2.0.0 MY2015.
Diagnostics:

Version 1.8.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 14

Vehicles Affected:

Massey Ferguson: 5300 DynaSwath
General:

Update to version 2.1 of the VMM flash file.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 15

Vehicles Affected:

ATS: HiPer AG
General:

Update the Diagnostic Surface and the Software Flash to be able to install TRU version 2.9 if it doesn't find TRU 2.9 already installed.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 16

Vehicles Affected:

AGCO: DTB Series
Challenger: MT600 C Series
Massey Ferguson: 8600 Series
General:

Vehicle Version 7.80.
Fixed bug that allowed download on a SD card the C1000 Software 2.1.3 on Challenger Tier3 tractors.
Allow MF8670 and MF8690 Tier2 tractors in Mexico.
Put the Range position sensor signal in Volt for Gearbox diagnostic.
New warning popup message for EXT flash if change of label code AA is needed.
Removed saving of the transmission calibration after changing label code AA. After changing the label code AA you will need to calibrate the transmission of the tractor.
New T4i engine content:
Fixed an inversion between upstream and downstream NOx sensor in the SCR diagnostic screen.
New C3000 content:
Added Powerboard software flash - version 2.05.
It is not required to run EDT as administrator to export software to USB.
Fixed incorrect flash step.
New AGCOMMAND content:
Added AM53 support.
Updated Network provider list.
Added CDMA diagnostic.
Software:

New Linkage Software v2.17.00:
Fixed a bug with the Memo A/B function in mini Headland mode.
Fixed a bug that do not allow to unlock the linkage when ISO mode active.
Fixed a bug with linkage switch when ISO mode active.
Fixed a bug with Isobus switch ALL that unlocked the linkage.
Fixed a bug with the Active transport control LED that was ON when dual control active but linkage in neutral.
New Transmission EXT-Lite Software v1.10:
Correction of a parklock bug.
Correction of a bug with Stepshift fonction.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 17

Vehicles Affected:

Fendt: L-Series 2015: 5255L, 6275L
Fendt: C-Series 2015: 5275CA, 5275CPLA, 6335CA, 6335CPLA
Laverda: M300 Series 2015: M300A, M310A
Laverda: M400 Series 2015: M400A, M400LCA, M400LCIA, M410A, M410LCA
Massey Ferguson: ACTIVA S Series 2015: 7345S, 7347S
Massey Ferguson: BETA Series 2015: 7360A, 7360PLA, 7370A, 7370PLA
Software:

NT01: Version 1600
NT02: Version 1600
EXT-LT: Bios 1.47
SD-Moduls: Version: 7.02
Diagnostics:

Release V1.4.
ECU-Details.
Hydraulic System.
Actuator.
Hydrostatic Drive.
Threshing System.
Unloading Leveling.
Diagnostic Tests.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 18

Vehicles Affected:

Massey Ferguson: MF7100
General:

Vehicle Version 2.5.
AG3000 Plug-in updated.
C3000 Plug-in updated.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 19

Vehicles Affected:

Challenger: 660(SA), 670(SA)
Massey Ferguson: MF9690(SA), MF9790(SA)
Valtra: BC6500, BC7500
General:

Vehicle Version 3.4.
AG3000 Plug-in updated.
C3000 Plug-in updated.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 20

Vehicles Affected:

Challenger: MT700 C, MT800 C, MT900 C
General:

Vehicle Version 3.27.
Updated AGCOMMAND plug-in to v2.1:
Support for AM53 module.
Updated C3000 plug-in to v3.0:
Added Powerboard software flash, v2.05.
Administrative rights no longer needed to export software to USB.
Updated flash steps.
Updated Lighting Module software to v3.37.0:
Fixed issue where EAME tractors would intermittently misdiagnose open circuit on turn indicators.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 21

Vehicles Affected:

Challenger: MT 700D Series
General:

Vehicle Version 1.19.
Updated T4i AGCO Power plug-in to v4.7:
Corrected interchanged NOx values.
Updated AGCOMMAND plug-in to v2.1:
Support for AM53 module.
Updated C3000 plug-in to v3.0:
Added Powerboard software flash, v 2.05.
Administrative rights no longer needed to export software to USB.
Updated flash steps.
Updated Lighting Module software to v3.37.0:
Fixed issue where EAME tractors would intermittently misdiagnose open circuit on turn indicators.
Updated Dash Cluster software to v2.9.0:
Fixed high hyd. temp indicator lamp activation.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 22

Vehicles Affected:

Challenger: MT 700E, MT 800E, MT 900E
General:

Vehicle Version 2.3.
Updated AGCOMMAND plug-in to v2.1:
Support for AM53 module.
Updated T4f AGCO Power plug-in to v1.8:
Added description for Throttle- / WG Actuator- % Value.
Updated C3000 plug-in to v3.0:
Added Powerboard software flash, v2.05.
Administrative rights no longer needed to export software to USB.
Updated flash steps.
Updated JAX MT Lighting & Powertrain plug-in v1.7:
Updated VIN record to support MY2016.
Updated Lighting Module software to v3.37.0:
Fixed issue where EAME tractors would intermittently misdiagnose open circuit on turn indicators..
Updated Dash Cluster software to v2.9.0:
Fixed high hyd. temp indicator lamp activation.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 23

Vehicles Affected:

Challenger: 520C, 530C, 540C, 550C, 560C, 560E
Massey Ferguson: 9520, 9530, 9540, 9545, 9550, 9560, 9565
General:

Vehicle Version 3.0.
New T4i LRC engine software.
New C2100 software (3.1.1).
New machine software (4.0.0.1).
Network Scan software version for:
VMMs, EMU, HMM, C2100 and FPC.
Engine flash now verifies spec number.
Support for new FPC hardware.
Updated Plugins:
C3000, EEM4, EEM4F, AGCOMMAND.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 24

Vehicles Affected:

Challenger: 660, 670, 680B(HSC-HUC)
Massey Ferguson: 9690, 9790, 9895 (HSC-HUC)
General:

Vehicle Version 2.0.
New vehicle images.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 25

Vehicles Affected:

AGCO: 8100, 8200, 8300, 8500, 8700, 8800 Planters
Challenger: 8100, 8200, 8300, 8500, 8700, 8800 Planters
Massey Ferguson: 8100, 8200, 8300, 8500, 8700, 8800 Planters
White: 8100, 8200, 8300, 8500, 8700, 8800 Planters
General:

Updated Plugins:
C3000.
C1000.
SGR-1.
Updated Planter Software to 6.76.
Fixed bug in flash process.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 26

Vehicles Affected:

Rogator: RG 900, RG 1100, RG 1300
Challenger: RG 900, RG 1100, RG 1300
General:

Vehicle Version 1.14.
Updated AGCOMMAND plug-in to v2.1:
Support for AM53 module.
Updated T4f AGCO Power plug-in to v1.8:
Added description for Throttle- / WG Actuator- % Value.
Updated T4i AGCO Power plug-in to v4.7:
Corrected interchanged NOx values.
Updated C3000 plug-in to v3.0:
Added Powerboard software flash, v2.05.
Administrative rights no longer needed to export software to USB.
Updated flash steps.
Updated SGR-1 plug-in to v2.3:
Support for TRU v2.9.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 27

Vehicles Affected:

Challenger: RG600
General:

Vehicle version 3.0.
Updated Plug-in:
C3000 Terminal v3.0.
AGCO POWER TIER4 EEM4 v4.7.
AGCO POWER TIER4 Final Diagnostics v1.8.
SGR-1 Receiver Support v2.3.
Software:

C3000 Terminal: added Power Board Software flash (v2.05).
Update software ECU Sprayer (BIN_01.08.zip). (Note: is only compatible with CONS_01.09.zip and CHS_01.08.zip)
Update software ECU Chassis (CHS_01.08.zip). (Note: is only compatible with CONS_01.09.zip and BIN_01.08.zip)

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 28

Vehicles Affected:

Challenger: RG700, RG700B
RoGator: RG700, RG700B
General:

Vehicle Version 2.2.
Enabled visibility of RG700B.
Support for MY2016 model year.
Updated AGCOMMAND plug-in to v2.1:
Support for AM53 module.
Updated T4f AGCO Power plug-in to v1.8:
Added description for Throttle- / WG Actuator- % Value.
Updated T4i AGCO Power plug-in to v4.7:
Corrected interchanged NOx values.
Updated C3000 plug-in to v3.0:
Added Powerboard software flash, v2.05.
Administrative rights no longer needed to export software to USB.
Updated flash steps.
Updated SGR-1 plug-in to v2.3:
Support for TRU v2.9.
Updated Armrest software to vSC1 2.0.0.150224.1400:
Numerous bug fixes and improvements. See software package for more detail.
Updated C1000 software to v3.1.1.150224:
Numerous bug fixes and improvements. See software package for more detail.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 29

Vehicles Affected:

Gleaner: R65, R75, R66, R76
General:

Vehicle Version 3.0.
Fixed all diagnostic graphical surfaces.
Network Scan software version for: FPC.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 30

Vehicles Affected:

Challenger: 660B, 670B, 680B
Fendt: 9300R, 9350R
Laverda: ML700, ML800
Massey Ferguson: 9595, 9795, 9895
General:

Vehicle Version 2.1.
New machine software (1.7.0).
New vehicle images.
Machines available in South Africa.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 31

Vehicles Affected:

Valtra: S3 Series
General:

Vehicle Version 5.80.
Added connector name on suspended cab diagnostic screens.
New warning popup message for EXT flash if change of label code AA is needed.
Removed saving of the transmission calibration after changing label code AA. After changing the label code AA you will need to calibrate the transmission of the tractor.
New T4i engine content:
Fixed an inversion between upstream and downstream NOx sensor in the SCR diagnostic screen.
New C3000 content:
Added Powerboard software flash - version 2.05.
It is not required to run EDT as administrator to export software to USB.
Fixed incorrect flash step.
New AGCOMMAND content:
Added AM53 support.
Updated Network provider list.
Added CDMA diagnostic.
Software:

New Transmission EXT-Lite Software v1.10:

Standardization on all Dyna-VT products.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 32

Vehicles Affected:

Valtra: S4 Series
General:

Vehicle Version 5.80.
Fixed a bug with exporting of the AG3000 vehicle profile.
Added connector name on suspended cab diagnostic screens.
Release of Help file specific for S4 series (EN and FR).
New T4F engine content:
Hide NOx sensor value when sensor is not ready.
New C3000 content:
Added Powerboard software flash - version 2.05.
It is not required to run EDT as administrator to export software to USB.
Fixed incorrect flash step.
New AGCOMMAND content:
Added AM53 support.
Updated Network provider list.
Added CDMA diagnostic.
Software:

New Transmission EXT-Lite Software v1.10:
Standardization on all Dyna-VT products.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 33

Vehicles Affected:

Gleaner: S67, S77
General:

Vehicle Version 3.0.
New C2100 software (3.1.1).
New CIC Software (7.26).
Fixed all diagnostic graphical surfaces.
Network Scan software version for:
FPC, C2100.
Engine flash now verifies spec number.
Support for new FPC hardware.
Updated Plugins:
AGCOMMAND, C3000, EEM4.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 34

Vehicles Affected:

Gleaner: S68, S78, S88
General:

Vehicle Version 3.0.
New C2100 software (3.1.1).
New CIC Software (7.26).
Improved diagnostic connection names.
Fixed all diagnostic graphical surfaces.
Network Scan software version for:
FPC, C2100.
Engine flash now verifies spec number.
Support for new FPC hardware.
Updated Plugins:
AGCOMMAND, C3000, EEM4F.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 35

Vehicles Affected:

Massey Ferguson: T7
General:

Vehicle Version 3.0.
Correct version of EIP SW (10.14).
Fixed all diagnostic graphical surfaces.
New vehicle image.
Network Scan software version for:
FPC.
Engine flash now verifies spec number.
Support for new FPC hardware.
Updated Plugins:
EEM4, EEM4F.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 36

Vehicles Affected:

Challenger: TerraGator 8333
General:

Vehicle version 2.4.
Updated Plug-in:
PVED-CL Steering Valve v2.9.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 37

Vehicles Affected:

TerraGator: 6303, 8303
General:

Vehicle Version 2.8.
Updated AGCOMMAND plug-in to v2.1:
Support for AM53 module.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 38

Vehicles Affected:

Challenger: TG 8300, TG 8300B
TerraGator: TG 7300, TG 7300B, TG 8300, TG 8300B, TG 8400, TG 8400B, TG 9300, TG 9300B
General:

Vehicle Version 1.25.
Updated AGCOMMAND plug-in to v2.1:
Support for AM53 module.
Updated T4f AGCO Power plug-in to v1.8:
Added description for Throttle- / WG Actuator- % Value.
Updated T4i AGCO Power plug-in to v4.7:
Corrected interchanged NOx values.
Set Network Scan visibility of Fan Controller to Optional (TG8400B only).

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 39

Vehicles Affected:

Challenger: TG 835
General:

Vehicle version 1.3.
Updated Plug-in:
AGCO POWER TIER4 Final Diagnostics v1.8.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 40

Vehicles Affected:

Challenger: TG 845
General:

Vehicle version 1.5.
Updated Plug-in:
AGCO SISU POWER Tier4 EEM4 v4.7.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 41

Vehicles Affected:

Valtra: T4-Series
General:

VT11 vehicle v1.11.
AC24_5, AC25_5 and AC27_5 set visible for ANZ region.
Added descriptions of AVC fault codes.
Manual mode button of clutch pedal and power shuttle fixed for Direct.
New fault codes added to robot calibration.
New features and analog outputs added to I/O test.
Single download under AC-software package temporarily inhibited.
Tests for multidisc clutches removed:
Not functional with AUTO calibration software.
Updated plug-ins:
AGCOMMAND v2.1, support for AM53 and CDMA diagnostic.
C3000 v3.0, powerboard software flash.
EEM4f v1.8, added description for Throttle- / WG Actuator- % Value.
Calibrations:

Manual Calibrations removed.
Reminder to engage the parking brake added for GS PTO calibration.
Software:

AC24.5 (1.1.0.0):
CVT Driving Logic improvements on C2 clutch and Engine brake.
AC25.5 (1.1.0.0):
Power Shift Driving Logic improvements on Down shift, Robot and Auto1 mode.
AC27.5 (1.1.0.0):
Power Shift Driving Logic improvements on Down shift, Robot and Auto1 mode.
SECU (1.2.0.0):
Quick Steering safety function improvements and unwanted activation fixed.
PVED-CL parameters updated.
Diagnostic Surface:

PTO gearbox and Ground Speed PTO pages updated.
Rear clutch pedal switch added to Engine Starting Test page.
Signal names PO22 and PO11 added to Brakes page.
Picture of drive lever fixed on Creeper page.
Fault Trees:

Lookup Override Folders determined for all T4 models.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 42

Vehicles Affected:

Challenger: WR9770, WR9760, WR9740, WR9735, WR9725
Massey Ferguson: WR9770, WR9760, WR9740, WR9735, WR9725
General:

Fixed drive pump wheel motor surface.
Update AG300:
Fixed bug with Wiring Diagram button on AGI-4 Inputs/Outputs Page.
Updated AGI-4 Software.
Update System 150:
Included steering and vehicle profiles.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 43

Vehicles Affected:

Massey Ferguson: 5600 Series
General:

Vehicle Version 3.50.
Fixed a inversion between Range 3 and Range 4 contactors on short console Dyna-6 gearbox diagnostic.
Fixed a bug with the display of Finger Tip 2 signal on the hydraulic diagnostic screen for 5611-5612-5613.
Fixed a inversion between downshift speed potentiometer and vertical stop potentiometer in the Linkage.
Fixed a wrong link to the help file in the light diagnostic screen.
Enabled the AGCOMMAND diagnostic on 5608, 5609 and 5610.
New T4i engine content:
Fixed an inversion between upstream and downstream NOx sensor in the SCR diagnostic screen.
New AGCOMMAND content:
Added AM53 support.
Updated Network provider list.
Added CDMA diagnostic.
Software:

New Linkage Software for Dyna-6 v2.17.00:
Fixed a bug with the Memo A/B function in mini Headland mode.
Fixed a bug that do not allow to unlock the linkage when ISO mode active.
Fixed a bug with linkage switch when ISO mode active.
Fixed a bug with Isobus switch ALL that unlocked the linkage.
Fixed a bug with the Active transport control LED that was ON when dual control active but linkage in neutral.
New Linkage and Transmission Software for Dyna-4 v1.12.0:
Fixed a bug with the Memo A/B function in mini Headland mode.
Fixed a bug that do not allow to unlock the linkage when ISO mode active.
Fixed a bug with linkage switch when ISO mode active.
Fixed a bug with Isobus switch ALL that unlocked the linkage.
New CAN Keyboard Software v2.30.0:
Compatibility with new products.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 44

Vehicles Affected:

Challenger: MT600E Series
Massey Ferguson: 8700 Series
General:

Vehicle Version 2.10.
Fixed a wrong connector number in the light diagnostic screen.
Put the Range position sensor signal in Volt instead of "points" for Gearbox diagnostic.
Released Help file specific for MF8700 and MT600E series (EN and FR).
New T4F engine content:
Hide NOx sensor value when sensor is not ready.
New C3000 content:
Added Powerboard software flash - version 2.05.
It is not required to run EDT as administrator to export software to USB.
Fixed incorrect flash step.
New AGCOMMAND content:
Added AM53 support.
Updated Network provider list.
Added CDMA diagnostic.
Software:

New Linkage Software v1.11.0:
Fixed a bug with the Memo A/B function in mini Headland mode.
Fixed a bug with the Active transport control LED that was ON when dual control active but linkage in neutral.
New Transmission EXT-Lite Software v1.10:
Standardization on all Dyna-VT products
New Keyboard Software v2.30.0:
Compatibility with new products

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 45

Vehicles Affected:

Challenger: MT500E Series
Iseki: i7700 Series
Massey Ferguson: MF 7700 Series
General:

Vehicle Version 1.0.
Initial release.
Help file : only EN and FR for the moment.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 46

Vehicles Affected:

Challenger: MT400D Series
Iseki: i6600 Series
Massey Ferguson: 6600 Series
General:

Vehicle Version 7.50.
Fixed an inversion between Range 3 and Range 4 contactors on short console Dyna-6 gearbox diagnostic.
Fixed an inversion between downshift speed potentiometer and vertical stop potentiometer in the Linkage.
Fixed a wrong link to the help file in the light diagnostic screen.
Put the Range position sensor signal in Volt for Dyna-VT Gearbox diagnostic.
Improve the refresh of the text in the button "Start" / "Continue" in the Powershift calibration. (Dyna-VT only).
New warning popup message for EXT flash if change of label code AA is needed. (Dyna-VT only).
Removing the saving of the transmission calibration after changing label code AA. After changing the label code AA you will need to calibrate the transmission of the tractor. (Dyna-VT only).
New T4i engine content:
Fixed an inversion between upstream and downstream NOx sensor in the SCR diagnostic screen.
New C3000 content:
Added Powerboard software flash - version 2.05.
It is not required to run EDT as administrator to export software to USB.
Fixed incorrect flash step.
New AGCOMMAND content:
Added AM53 support.
Updated Network provider list.
Added CDMA diagnostic.
Software:

New Linkage Software for Dyna-6 and Dyna-VT v2.17.00:
Fixed a bug with the Memo A/B function in mini Headland mode.
Fixed a bug that do not allow to unlock the linkage when ISO mode active.
Fixed a bug with linkage switch when ISO mode active.
Fixed a bug with Isobus switch ALL that unlocked the linkage.
Fixed a bug with the Active transport control LED that was ON when dual control active but linkage in neutral.
New Linkage and Transmission Software for Dyna-4 v1.12.0:
Fixed a bug with the Memo A/B function in mini Headland mode.
Fixed a bug that do not allow to unlock the linkage when ISO mode active.
Fixed a bug with linkage switch when ISO mode active.
Fixed a bug with Isobus switch ALL that unlocked the linkage.
New Transmission EXT-Lite Software v1.10 for Dyna-VT tractors:
Correction of a parklock bug.
Correction of a bug with Stepshift fonction.
New CAN Keyboard Software v2.30.0:
Compatibility with new products.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 47

Vehicles Affected:

Challenger: MT500 D Series
Iseki: i7600 Series
Massey Ferguson: 7600 Series
General:

Vehicle Version 7.50.
Fixed an inversion between Range 3 and Range 4 contactors on short console Dyna-6 gearbox diagnostic.
Fixed an inversion between downshift speed potentiometer and vertical stop potentiometer in the Linkage.
Fixed a bug with the displaying of the help picture in Transmission Dyna-6 label code AA.
Fixed a wrong link to the help file in the light diagnostic screen.
Put the Range position sensor signal in Volt for Dyna-VT Gearbox diagnostic.
Improve the refresh of the text in the button "Start" / "Continue" in the Powershift calibration. (Dyna-VT only)
New warning popup message for EXT flash if change of label code AA is needed. (Dyna-VT only)
Removing the saving of the transmission calibration after changing label code AA. After changing the label code AA you will need to calibrate the transmission of the tractor. (Dyna-VT only)
New T4i engine content:
Fixed an inversion between upstream and downstream NOx sensor in the SCR diagnostic screen.
New C3000 content:
Added Powerboard software flash - version 2.05.
It is not required to run EDT as administrator to export software to USB.
Fixed incorrect flash step.
New AGCOMMAND content:
Added AM53 support.
Updated Network provider list.
Added CDMA diagnostic.
Software:

New Linkage Software for Dyna-6 and Dyna-VT v2.17.00:
Fixed a bug with the Memo A/B function in mini Headland mode.
Fixed a bug that do not allow to unlock the linkage when ISO mode active.
Fixed a bug with linkage switch when ISO mode active.
Fixed a bug with Isobus switch ALL that unlocked the linkage.
Fixed a bug with the Active transport control LED that was ON when dual control active but linkage in neutral.
New Linkage and Transmission Software for Dyna-4 v1.12.0:
Fixed a bug with the Memo A/B function in mini Headland mode.
Fixed a bug that do not allow to unlock the linkage when ISO mode active.
Fixed a bug with linkage switch when ISO mode active.
Fixed a bug with Isobus switch ALL that unlocked the linkage.
New Transmission EXT-Lite Software v1.10 for Dyna-VT tractors:
Correction of a parklock bug.
Correction of a bug with Stepshift fonction.
New CAN Keyboard Software v2.30.0:
Compatibility with new products.

--------------------------------------------------------------------------------

Release Notes - 2/5/2015 (Update 0160)

EDT NOTES:

EDT Version: 1.72.15019.734

EDT:
Updated EDT services to use secure.agco-ats.com as primary end-point.
Sontheim Release 1.07.0918:
Contains a Fendias Registry Fix from SiE.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 1

Vehicles Affected:

Challenger: WR9860, WR9870
Massey Ferguson: WR9860, WR9870
General:

Added support for turbo actuator flash.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 2

Vehicles Affected:

Fendt: 8380P, 8380P AL, 8410P, 8410P AL, 9490X, 9490X AL
Massey Ferguson: 7380, 7380 AL, 7382, 7382 AL, 9380, 9380 AL
Software:

Turbo Actuator Software V151.003.
Diagnostics:

Release V1.6:
Updated EEM4F plugin.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 3

Vehicles Affected:

Massey Ferguson: 4608, 4609, 4610
Software:

New engine software files Version 1.4.7_Rev.1:
Improvements for high altitude.
Solved PRV issues.
Solved EGR overload issues.
Diagnostics:

Updated EEM4 plugin Version 4.6.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 4

Vehicles Affected:

Fendt: 5255L, 6275L, 5275CA, 5275CPLA, 6335CA, 6335CPLA
Laverda: M300, M310, M400A, M400LCA, M400LCIA, M410A, M410LCA
Massey Ferguson: 7345S, 7347S, 7360A, 7360PLA, 7370A, 7370PLA
Software:

Turbo Actuator Software V151.003.
New EXT-LT Software Version V39.
Diagnostics:

Release V1.2:
Updated EEM4F plugin.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 5

Vehicles Affected:

Challenger: MT700E, MT800E, MT900E
General:

Vehicle Version 2.2.
Updated T4f AGCO Power plug-in to v1.6:
EDT can now flash software onto engine Turbo Wastegate Actuator.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 6

Vehicles Affected:

Challenger: 520C, 540C, 560C, 540E, 560E
Massey Ferguson: 9520, 9540, 9560, 9545, 9565
General:

Updated EEM4F Plugin to support Waste Gate Actuator software flash.
Added models:
2015 MF9520.
2015 MF9545.
2015 MF9565.
2015 CH520C.
2015 CH540E.
2015 CH560E.
Updated vehicle images.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 7

Vehicles Affected:

Rogator: RG 900, RG 1100, RG 1300
Challenger: RG 900, RG 1100, RG 1300
General:

Vehicle Version 1.12.
Updated T4f AGCO Power plug-in to v1.6:
EDT can now flash software onto engine Turbo Wastegate Actuator.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 8

Vehicles Affected:

Challenger: RG600
General:

Vehicle version 2.9.
Updated Plug-in:
AGCO POWER TIER4 Final Diagnostics v1.6.
Software:

Added Wastegate Actuator Software Flash (5846E151.003.hex).
(Note: intended for Tier4 Final engines in case the Wastegate Actuator software is not up to date).

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 9

Vehicles Affected:

Gleaner: S68, S78, S88
General:

Updated EEM4F Plugin to support Waste Gate Actuator software flash.
Updated vehicle images.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 10

Vehicles Affected:

Challenger: TG 8300B
TerraGator: 7300B, 8300B, 8400B, 9300B
General:

Vehicle Version 1.24.
Updated T4f AGCO Power plug-in to v1.6:
EDT can now flash software onto engine Turbo Wastegate Actuator.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 11

Vehicles Affected:

Challenger: TG835
General:

Vehicle version 1.2.
Updated Plug-in:
AGCO POWER TIER4 Final Diagnostics v1.6.
Software:

Added Wastegate Actuator Software Flash (5846E151.003.hex).
(Note: intended for Tier4 Final engines in case the Wastegate Actuator software is not up to date).

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 12

Vehicles Affected:

Valtra: S4 Series
General:

Vehicle Version 5.70.
Add Engine speed sensor signal to the Gearbox diagnostic view.
Add Suspended Cab - ECU View to allow the diagnostic during calibration.
Add Electrical View on Gearbox diagnostic for S4 series.
Put the Range position sensor signal in Volt for Dyna-VT Gearbox diagnostic.
Implement error codes with ID=34.
Change the photo of Valtra S4 in the model selection screen.
Fix a inversion between Suspended Cab solenoid valve in the diagnostic screens.
New T4F Engine content:
Add the possibility to flash the Turbo Actuator if the Turbo actuator is in version 151.002.
Added 2 new Engine Tests:
Oscilloscope Rail System.
Oscilloscope SCR System.
Small bug-fixing.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 13

Vehicles Affected:

Challenger: MT600E Series
Massey Ferguson: 8700 Series
General:

Vehicle Version 2.5.
New T4F Engine content:
Add the possibility to flash the Turbo Actuator if it is in version 151.002.
Added 2 new Engine Tests:
Oscilloscope Rail System.
Oscilloscope SCR System.
Small bug-fixing.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 14

Vehicles Affected:

Valtra: T4-Series
General:

VT11 vehicle v1.8.
Added reminder before AC-software package download.
Added notification for manual calibrations.
SECU set visible to Steering BUS.
Updated plug-ins:
EEM4 Final v1.6, Software for Waste Gate Actuator.
Software:

Software packages:
AC24.5 (1.0.7.0):
Improved software for Transmission controller, Tractor terminal and Pillar display.
AC25.5 (1.0.7.0):
Improved software for Tractor terminal and Pillar display.
AC27.5 (1.0.7.0):
Improved software for Pillar display.
SECU (1.1.0.0):
Added reminder after flash to check the steering valve parameter revision.
PVED-CL max wheel angle parameters updated:
T4 parameters updated to revision 5.

--------------------------------------------------------------------------------

Release Notes - 1/16/2015 (Update 0158)

EDT NOTES:

EDT Version: 1.72.14296.1224


--------------------------------------------------------------------------------

CONTENT UPDATES - Part 1

Vehicles Affected:

Massey Ferguson: 3600 Series
General:

Model 3640 for region South America added.
Diagnostics:

Release v3.10.
M-Tool2014 for Win7 Computers included.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 2

Vehicles Affected:

Valtra: T-Series, N-Series, A-Series
General:

ANT-vehicle v2.94.
LRC tractors set visible for Eastern Europe region.
Rear pillar display removed from small N (AC18.4).
Select Engine Software pop-up window added for small N93 and N103 (derate).
Special download tool added for EEM4 under diagnostic test tab.
Updated plug-ins:
C1000 v1.16, fixed bug in file export.
C3000 v2.6, added software 3.17.208ag.
Topcon System 150 v3.1, fixed bug in vehicle export.
PVED-CL v2.9, flash bug fixed added.
EEM4 v4.6, with new oscilloscope tests.
Diagnostic Surface:

Improved CVT transmission page added for Direct tractors.
PTO sigma page set visible for N-series Versu and Direct models.
Updated Differential Lock deactivation page.
Fault Trees:

General update for all vehicles.
Initial translation versions for SV, PL, DE, FR, IT, ES, FI.
Calibrations:

Automatic Calibration for multidisc clutches and clutch pedal for Direct (AC14).
Automatic Calibration for multidisc clutches and clutch pedal for HT3 (AC16 & AC18):
Auto Calibration asks to change the engine rpm from 1600 to 1100 in tractors without EEM.
Rear linkage calibration tool added for A3 series.
Cab suspension calibration reminder added after SUS1 software downloading.
Software:

AC14.3 (2.0.0.0) Direct Auto Calibration software + parameters:
Direction change softer, Traction Control optimized, Free rolling minimized.
AC14.33 (2.0.0.0) Direct Auto Calibration software + parameters:
Direction change softer, Traction Control optimized, Free rolling minimized.
AC16.0 (2.2.0.0) HT3 Auto Calibration software + parameters for T series:
Improvements on Clutch pedal, Power Shuttle and PTO behavior.
AC16.2 (2.2.0.0) HT3 Auto Calibration software + parameters for T series:
Improvements on Clutch pedal, Power Shuttle and PTO behavior.
AC16.3 (2.2.0.0) HT3 Auto Calibration software + parameters for T series:
Improvements on Clutch pedal, Power Shuttle and PTO behavior.
AC18.0 (2.2.0.0) HT3 Auto Calibration software + parameters for N series:
Improvements on Clutch pedal, Power Shuttle and PTO behavior.
AC18.4 (2.2.0.0) HT3 Auto Calibration software + parameters for N series:
Improvements on Clutch pedal, Power Shuttle and PTO behavior.
EEM4 engine software 1.5.0 for LRC tractors:
Changed monitoring time of rail pressure preventing error codes (0-520294-0/16).
Improved high pressure pump control removes the buzzing noise after shutdown.
Diagnostic of start relay fixed preventing unnecessary error code (0-677-5).
PVED-CL parameters updated:
Improves the Auto-Guide function on curved drive lines.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 3

Vehicles Affected:

Massey Ferguson: 7350, 7370, 7390, 7415
Valtra: BT150, BT170, BT190, BT210
General:

Vehicle version 4.0.
New C3000 content:
Added 4.1K12p4 Software.
New AG150 content:
Fixed bug in vehicle export.
New AG3000 content:
Added 3.17.208ag Software.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 4

Vehicles Affected:

Challenger: 760(Made in Brazil), 860C(Made in Brazil)
Massey Ferguson: MF9795(Made in Brazil), MF9895(Made in Brazil)
Valtra: BC7800(Made in Brazil), BC8800(Made in Brazil)
General:

Vehicle Version 1.1.
Fix EEM4 Flash File.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 5

Vehicles Affected:

Massey Ferguson: MF6690
General:

Vehicle Version 2.0.
New Release.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 6

Vehicles Affected:

Massey Ferguson: MF 2700-4700 Series
General:

Vehicle version 2.3.
Fix the bug : When you have two blank Auto7 you can't flash an Auto7.
Fix the problem with stored error codes.
New map to adjust models/options available depending on the regions.
Modification of ISC parameters codeAA.
New error code 6.1.9 : PTO swith active but PTO not active.
Translations for linkage mode signal in the linkage diagnostic screen.
New EEM4 content:
Modified Shutdown Log (some minor bugs).
Added new Engine Test:
Oscilloscope Rail System.
Added checksum for all Logs.
Added function for internal AGCO users to verify logfiles if tampered.
Software:

New T4i AGCO Power engine software.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 7

Vehicles Affected:

Fendt: 8380P, 8410P, 9490X
Massey Ferguson: 7380, 7382, 9380
Diagnostics:

Release v1.5.
Opened all flash-files.
Updated engine software version 0.5.14.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 8

Vehicles Affected:

ATS: HiPer AG
General:

Added support for version 2.9 of TRU.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 9

Vehicles Affected:

Massey Ferguson: 4608, 4609, 4610
General:

Added support for Fuel Limit Adjustment for spare part Ecus.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 10

Vehicles Affected:

AGCO: DTB Series
Challenger: MT600 C Series
Massey Ferguson: 8600 Series
General:

Vehicle version 7.70.
Enable English for suspended cab table of constants.
Fix a bug with the latest version available of Armrest software on Tier4i tractors.
New EEM4 content:
Modified Shutdown Log (some minor bugs).
Added 2 new Engine Tests:
Oscilloscope Rail System.
Oscilloscope SCR System.
Added checksum for all Logs.
Added function for internal AGCO users to verify logfiles if tampered.
New PVED-CL content:
Additional Calibration 'Max. Wheel Angle Setup' Allows to set up the real max. mechanical wheel angle.
New C3000 content:
Added 4.1K12p4 Software.
New AG150 content:
Fixed bug in vehicle export.
New AG3000 content:
Added 3.17.208ag Software.
Software:

New T4i engine software:
Improvement of the DEF / Urea heating management in cold weather.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 11

Vehicles Affected:

Fendt: L-Series 2015: 5255L, 6275L
Fendt: C-Series 2015: 5275CA, 5275CPLA, 6335CA, 6335CPLA
Laverda: M300 Series 2015: M300A, M310A
Laverda: M400 Series 2015: M400A, M400LCA, M400LCIA, M410A, M410LCA
Massey Ferguson: ACTIVA S Series 2015: 7345S, 7347S
Massey Ferguson: BETA Series 2015: 7360A, 7360PLA, 7370A, 7370PLA
General:

Initial Release v1.0.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 12

Vehicles Affected:

Challenger: MT700 C, MT800 C, MT900 C
General:

Vehicle Version 3.26.
Updated C3000 plug-in to v2.6:
Includes new C3000 software.
Updated AG3000 plug-in to v2.9:
Includes new AG3000 firmware.
Software:

"3.4.0.0" Armrest software:
Added additional data for future applications.
"3.17.208" C3000 console software:
Guidance bug fixes and improvements. Contains AG3000 firmware v4.1.K.12 p4.
"4.1.K.12 p4" AG3000 firmware:
Guidance bug fixes and improvements.
"3.0.1.140904" C1000 Virtual Terminal software:
Data logging template fixed to allow tractor data logging when tasks are running.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 13

Vehicles Affected:

Challenger: MT 700D Series
General:

Vehicle Version 1.18.
Updated T4i AGCO Power plug-in to v4.6:
Includes new Rail and SCR Oscilloscope tests.
Corrected T4i engine software version network scan. EDT will now correctly display the latest software version for T4i engines.
Software:

"3.4.0.0" Armrest software:
Added additional data for future applications.
"3.17.208" C3000 console software:
Guidance bug fixes and improvements. Contains AG3000 firmware v4.1.K.12 p4.
"4.1.K.12 p4" AG3000 firmware:
Guidance bug fixes and improvements.
"3.0.1.140904" C1000 Virtual Terminal software:
Data logging template fixed to allow tractor data logging when tasks are running.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 14

Vehicles Affected:

Challenger: MT700E, MT800E, MT900E
General:

Vehicle Version 2.1.
Updated MT Lighting & Powertrain plug-in to v1.5:
Corrected visibility of some Diagnostic Surfaces.
Updated C3000 plug-in to v2.6:
Includes new C3000 software.
Updated AG3000 plug-in to v2.9:
Includes new AG3000 firmware.
Software:

"3.4.0.0" Armrest software:
Added additional data for future applications.
"3.17.208" C3000 console software:
Guidance bug fixes and improvements. Contains AG3000 firmware v4.1.K.12 p4.
"4.1.K.12 p4" AG3000 firmware:
Guidance bug fixes and improvements.
"3.0.1.140904" C1000 Virtual Terminal software:
Data logging template fixed to allow tractor data logging when tasks are running.
"00.468.7511.00" Main Machine transmission software:
Transmission oil temperature limit change: 1 second at or above 96C to set alarm (was 99C). 5 seconds below 90C to clear alarm (was 88C).

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 15

Vehicles Affected:

Challenger: 520C, 530C, 540C, 550C, 560C
Fendt: 9390R, 9450R, 9480R
Massey Ferguson: 9520, 9530, 9540, 9550, 9560
General:

Fixed false engine derating warning during T4F engine flash.
Updated Plugins:
EEM4.
C3000.
Auto-Guide 3000.
PVED_CL.
Software:

New Combine Software: 4.0.0.0:
Support for hydraulic cleaning fan.
Fixed feeder height calibration alarm.
Added delay to cooling door alarm.
Increased engine temperature range.
Changes to support South American combines.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 16

Vehicles Affected:

Rogator: RG 900, RG 1100, RG 1300
Challenger: RG 900, RG 1100, RG 1300
General:

Vehicle Version 1.11.
Updated PVED plug-in to v2.9:
Corrected parameter configuration model type and updated revision number.
Updated T4i AGCO Power plug-in to v4.6:
Includes new Rail and SCR Oscilloscope tests.
Updated Norac plug-in to v1.6:
Includes previously released version for UC5 module.
Updated C3000 plug-in to v2.6:
Includes new C3000 software.
Updated AG3000 plug-in to v2.9:
Includes new AG3000 firmware.
Corrected T4i engine software version network scan. EDT will now correctly display the latest software version for T4i engines.
Software:

"3.17.208" C3000 console software:
Guidance bug fixes and improvements. Contains AG3000 firmware v4.1.K.12 p4.
"4.1.K.12 p4" AG3000 firmware:
Guidance bug fixes and improvements.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 17

Vehicles Affected:

Challenger: RG600
General:

Vehicle version 2.8.
Updated Plug-in:
AGCO SISU POWER TIER4 EEM4 v4.6.
C3000 Terminal v2.6.
Norac UC5 v1.6.
PVED-CL Steering Valve v2.9.
Configuration:

Added option "Centerframe Version" for model year 2015 machines (Note: update ECU Sprayer to version BIN_01.07).
Diagnostics by Function:

Functional group ?Hydrostatic Drive", diagnostic surface ?Wheel Motors/Drive Pump" added label for Wheel Motors/Drive Pump Version (I,II).
Functional group ?Suspension", diagnostic surfaces ?Low/High Mode", added ?target values" for low machine speed.
Functional group ?Sprayer Boom Hydraulics", added diagnostic surface ?Norac Boom Control".
Functional group ?Sprayer Boom Hydraulics", modified diagnostic surfaces (new/old centerframe related).
Functional group ?Spray Pump", modified diagnostic surface ?Low Flow Control" (low flow valve threshold values are settable from C1000).
Software:

ECU Sprayer, when flashing EOL, default product tank level measurement values are set.
Added previous flash file Norac UC5 (E2UC5-UP1152.zip).
Added ?Export Norac Flash File to USB" (production and previous software).
Added ?Export SGR-1 Flash Files to USB" (production software).
Update software C1000 Terminal (CONS_01.09.zip). (Note: is only compatible with BIN_01.07.zip and CHS_01.07.zip).
Update software ECU Sprayer (BIN_01.07.zip). (Note: is only compatible with CONS_01.09.zip and CHS_01.07.zip).
Update software ECU Chassis (CHS_01.07.zip). (Note: is only compatible with CONS_01.09.zip and BIN_01.07.zip).
Update software Suspension/4WS ECU (Challenger2v148.mhx).
Update Norac software (package E2UC5-UP4_6_6_1.fw2).
Update RG635C Tier4Final engine software (837085956.hex).
Update C3000 Terminal (X30_AGCO_V3.17.208_rel_full_upgrade.zip).

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 18

Vehicles Affected:

Challenger: RG 700
RoGator: RG 700
General:

Vehicle Version 2.0.
Updated PVED plug-in to v2.9:
Corrected parameter configuration model type and updated revision number.
Updated T4i AGCO Power plug-in to v4.6:
Includes new Rail and SCR Oscilloscope tests.
Updated Norac plug-in to v1.6:
Includes previously released version for UC5 module.
Updated C3000 plug-in to v2.6:
Includes new C3000 software.
Updated AG3000 plug-in to v2.9:
Includes new AG3000 firmware.
Removed SCR/DEF equipment pop-up question:
EDT will now auto-detect appropriate engine software file.
Software:

"2.0.1 & 3.0.1" C1000 Virtual Terminal Software:
Contains updated AGCONTROL software. See software flash package for more detail.
"1.5.0" AGCO Power T4i engine software:
DEF supply module bug fixes and improvements.
"3.17.208" C3000 console software:
Guidance bug fixes and improvements. Contains AG3000 firmware v4.1.K.12 p4.
"4.1.K.12 p4" AG3000 firmware:
Guidance bug fixes and improvements.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 19

Vehicles Affected:

Valtra: S4 Series
General:

Vehicle version 5.60.
Fix a bug in the EXT Error code detection on EDT.
Put connector numbers on active suspended cab solenoid valves.
New PVED-CL content:
Fix a possible crash of EDT after flashing the PVED.
Additional Parameter "bSpoolCorrectionFromParameterFile" Needed for Valtra reverse station.
Additional Calibration "Max. Wheel Angle Setup" Allows to set up the real max. mechanical wheel angle.
New C3000 content:
Added 4.1K12p4 Software.
New AG3000 content:
Added 3.17.208ag Software.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 20

Vehicles Affected:

Gleaner: S67, S77, R66, R76
General:

Updated Plugins:
EEM3.
EEM4.
C3000.
Auto-Guide 3000.
PVED_CL.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 21

Vehicles Affected:

Challenger: TG 8300B
TerraGator: 7300, 7300B, 8300, 8300B, 8400, 8400B, 9300, 9300B
General:

Vehicle Version 1.23.
Updated PVED plug-in to v2.9:
Corrected parameter configuration model type and updated revision number.
Updated T4i AGCO Power plug-in to v4.6:
Includes new Rail and SCR Oscilloscope tests.
Corrected T4i engine software version network scan. EDT will now correctly display the latest software version for T4i engines.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 22

Vehicles Affected:

Challenger: TG 835
General:

Vehicle version 1.1.
Updated Plug-ins:
AGCO POWER TIER4 Final Diagnostics v1.3.
PVED-CL Steering Valve v2.9.
Software:

Update DCC3 Software (TERRA_GATOR_v75.hex).
Update NMS Software (ATSConsole2_2014_10_23_Ver_1_6_11F).
Update EEM4 Software (837085747.hex).
Added Export SGR-1 software files to USB thumb drive (SGR-1_3_6.zip).

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 23

Vehicles Affected:

Challenger: TG 845
General:

Vehicle version 1.4.
Updated Plug-ins:
AGCO SISU POWER Tier4 EEM4 v4.6.
PVED-CL Steering Valve v2.9.
Software:

Update DCC3 Software (TERRA_GATOR_v75.hex).
Update NMS Software (ATSConsole2_2014_10_23_Ver_1_6_11F).
Added Export SGR-1 software files to USB thumb drive (SGR-1_3_6.zip).

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 24

Vehicles Affected:

Valtra: S3 Series
General:

Vehicle version 5.60.
Put connector numbers on active suspended cab solenoid valves.
New PVED-CL content:
Fix a possible crash of EDT after flashing the PVED.
Additional Parameter "bSpoolCorrectionFromParameterFile" Needed for Valtra reverse station.
Additional Calibration "Max. Wheel Angle Setup" Allows to set up the real max. mechanical wheel angle.
New EEM4 content:
Modified Shutdown Log (some minor bugs).
Added 2 new Engine Tests:
Oscilloscope Rail System.
Oscilloscope SCR System.
Added checksum for all Logs.
Added function for internal AGCO users to verify logfiles if tampered.
New C3000 content:
Added 4.1K12p4 Software.
New AG150 content:
Fixed bug in vehicle export.
New AG3000 content:
Added 3.17.208ag Software.
Software:

Add DCC Software 2.1.0 in the previous package for Tier4i and CACHT.
New T4i engine software:
Improvement of the DEF / Urea heating management in cold weather.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 25

Vehicles Affected:

Valtra: T4-Series
General:

VT11 vehicle v1.4.
T194 Active and Versu models added.
Added the query of front hydraulics concerning IO2 module.
Cab suspension calibration reminder added after SUS1 software downloading.
New hydraulic configurations added with updated names.
SECU added to Steering BUS.
Special download tool added for EEM4 under diagnostic test tab.
Updated plug-ins:
C1000 v1.16, fixed bug in file export.
C3000 v2.6, added software 3.17.208ag.
PVED-CL v2.9, flash bug fixed.
EEM4 v4.6, with new oscilloscope tests.
Diagnostic Surface:

Added Creeper diagnostic page for Versu and Active.
Added front AUX hydraulics diagnostic page for Active.
Power Shuttle layout page set visible for Active.
PTO data flow diagram set visible for Active.
Rear Linkage working diagram set visible for Active.
Updated CVT transmission page for Direct.
Fault Trees:

Initial release for T series 4th generation tractors.
Software:

AC24.5 (1.0.5.0):
Transmission controller, Tractor pillar display and hydraulic valve parameters update.
AC25.5 (1.0.5.0):
Transmission controller, Tractor pillar display and hydraulic valve parameters update.
AC27.5 (1.0.5.0):
Transmission controller, Tractor pillar display and hydraulic valve parameters update.
SUS1 (1.0.2.0):
Improved reference voltage supply protection, Calibration delay degreased to 3 sec.
SECU (1.0.1.0):
Speed limited to 0 km/h if wrong software downloaded, Mixed TTC steering inhibited.
TECU (1.0.0.1):
Bug fixing and improvements.
Updated EEM4 software for all T4 tractors:
Prevents the fault code 0-3031-14 (DEF tank maximum defrost time exceeded).
PVED-CL max wheel angle parameters updated:
Improves the Auto-Guide function on curved drive lines.
Additional parameter for Valtra reverse station.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 26

Vehicles Affected:

Challenger: 9700
Massey Ferguson: 9700
General:

Removed faulty Graphical Surface for Wheel Motors/Drive Pump.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 27

Vehicles Affected:

Massey Ferguson: 5600 Series
General:

Vehicle version 3.40.
Modifications of TECU label code B description to put the models in it.
Fix the inversion of Transmission and Linkage application on the Clean Auto5 configuration for Dyna-4 tractors.
Changes on the Boost diagnostic screen to display the right components.
New EEM4 content:
Modified Shutdown Log (some minor bugs).
Added 2 new Engine Tests:
Oscilloscope Rail System.
Oscilloscope SCR System.
Added checksum for all Logs.
Added function for internal AGCO users to verify logfiles if tampered.
Software:

New Dashboard DCC3 Software v2.7.0:
Fix a bug with the PTO display on the Data4 that was not in line with dashboard (Dyna-6 and Dyna-4).
New T4i and T3 engine software:
Improvement of the DEF / Urea heating management in cold weather.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 28

Vehicles Affected:

Challenger: MT600E Series
Massey Ferguson: 8700 Series
General:

Vehicle version 2.1.
Enable English for suspended cab table of constants.
Corrects the C1000 latest version available on the Tractor and Hydraulic connection.
New PVED-CL content:
Additional Calibration "Max. Wheel Angle Setup" Allows to set up the real max. mechanical wheel angle.
New C3000 content:
Added 4.1K12p4 Software.
New AG3000 content:
Added 3.17.208ag Software.
Software:

New Dashboard IC1 Software v2.3.0:
Fix a bug with C1 and C2 display in T-Handle mode.
Fix a bug with the affectation of H3/H4.
New TECU Software v1.19.0:
Fix a bug with the management of ISO switch on a Multipad tractor.
New Linkage Software v1.10.0:
Deactivation of quick soil engagement if linkage downshift speed is under 5%.
Fix a bug with Dual control.
Fix a bug with front linkage when flow > 25%.
Fix a bug with armrest switch when ISO activated.
Fix a bug that avoid to unlock the front linkage when ISO activated.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 29

Vehicles Affected:

Challenger: MT400 D Series
Iseki: i6600 Series
Massey Ferguson: 6600 Series
General:

Vehicle version 7.20.
Modifications of TECU label code B description to put the models in it.
Fix the inversion of Transmission and Linkage application on the Clean Auto5 configuration for Dyna-4 tractors.
New EEM4 content:
Modified Shutdown Log (some minor bugs).
Added 2 new Engine Tests:
Oscilloscope Rail System.
Oscilloscope SCR System.
Added checksum for all Logs.
Added function for internal AGCO users to verify logfiles if tampered.
New PVED-CL content:
Additional Calibration 'Max. Wheel Angle Setup' Allows to set up the real max. mechanical wheel angle.
New C3000 content:
Added 4.1K12p4 Software.
New AG150 content:
Fixed bug in vehicle export.
New AG3000 content:
Added 3.17.208ag Software.
Software:

New Dashboard DCC3 Software v2.7.0:
Fix a bug with the PTO display on the Data4 that was not in line with dashboard (Dyna-6 and Dyna-4).
Fix a bug with the error code D176 (Dyna-VT).
New T4i engine software:
Improvement of the DEF / Urea heating management in cold weather.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 30

Vehicles Affected:

Challenger: MT500 D Series
Iseki: i7600 Series
Massey Ferguson: 7600 Series
General:

Vehicle version 7.20.
Modifications of TECU label code B description to put the models in it.
Fix the inversion of Transmission and Linkage application on the Clean Auto5 configuration for Dyna-4 tractors.
New EEM4 content:
Modified Shutdown Log (some minor bugs).
Added 2 new Engine Tests:
Oscilloscope Rail System.
Oscilloscope SCR System.
Added checksum for all Logs.
Added function for internal AGCO users to verify logfiles if tampered.
New PVED-CL content:
Additional Calibration 'Max. Wheel Angle Setup' Allows to set up the real max. mechanical wheel angle.
New C3000 content:
Added 4.1K12p4 Software.
New AG150 content:
Fixed bug in vehicle export.
New AG3000 content:
Added 3.17.208ag Software.
Software:

New Dashboard DCC3 Software v2.7.0:
Fix a bug with the PTO display on the Data4 that was not in line with dashboard (Dyna-6 and Dyna-4).
Fix a bug with the error code D176 (Dyna-VT).
New T4i engine software:
Improvement of the DEF / Urea heating management in cold weather.
New EXT Software V1.09 and dashboard DCC3 v2.8.0:
Models affected:
Massey Ferguson 7619-7620-7622-7624 Dyna-VT.
Challenger MT555D-MT565D-MT575D-MT585D TechStar CVT.
Iseki i7619-i7622-7624 CVT.
Improvement of start-up on tractors with Parklock and pneumatic brake.

--------------------------------------------------------------------------------

Release Notes - 11/25/2014 (Update 0154)

EDT NOTES:

EDT Version: 1.72.14296.1224


--------------------------------------------------------------------------------

CONTENT UPDATES - Part 1

Vehicles Affected:

Challenger: 520C, 530C, 540C, 550C, 560C
Fendt: 9390R, 9450R, 9480R
Massey Ferguson: 9520, 9530, 9540, 9550, 9560
General:

Updated T4i and T4i LRC Engine Software.
Updated Fan Pitch Controller Software for Class 6.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 2

Vehicles Affected:

Gleaner: S67, S77, R66, R76
General:

Updated T4i and T4i LRC Engine Software.
Corrected T4F and T4F LRC Engine Release Notes.
Updated Fan Pitch Controller Software.
Updated EIP software for Rotor Gearbox Oil Level Kits.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 3

Vehicles Affected:

Challenger: WR9770, WR9760, WR9740, WR9735, WR9725
Massey Ferguson: WR9770, WR9760, WR9740, WR9735, WR9725
General:

Updated T2 and T4i EEM4 engine firmware to version 1.5.0.

--------------------------------------------------------------------------------

Release Notes - 10/31/2014 (Update 0153)

EDT NOTES:

EDT Version: 1.72.14296.1224

EDT:
Fixed an issue where Fendias stopped working after an EDT Update was installed.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 1

Vehicles Affected:

Challenger: WR9860, WR9870
Massey Ferguson: WR9860, WR9870
General:

New authorization which can utilize parameter numbers above 200.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 2

Vehicles Affected:

Valtra: T-Series, N-Series, A-Series
General:

ANT-vehicle v2.92
Turbine Clutch in tractor question in AC16.2 appears only for N101H and N121H models.
Reading tractor information before exiting Adjust TC1 indexes page.
Support for reading and writing of Vin number of A3 series.
Updated plug-ins:
AG3000 v2.9 Updated software and fixed the wiring diagram button.
Diagnostic Surface:

Gas pedal adjustment diagnostic page set visible for all EEM4 models.
Bug fixing on CVT transmission diagnostic page.
Calibrations:

Automatic Calibration of power shuttle clutches and clutch pedal for A-series (AC17.2).
Manual mode button added to power shuttle and clutch pedal calibration pages for Direct (AC14).
Software:

AC15.3 (2.3.0.0) Launch assistant for start out when changing direction:
Improvements on Robot behavior, Front PTO engagement and U-pilot safety functions.
AC15.33 (2.3.0.0) Launch assistant for start out when changing direction:
Improvements on Robot behavior, Front PTO engagement and U-pilot safety functions.
AC15.34 (2.3.0.0) Launch assistant for start out when changing direction:
Improvements on Robot behavior, Front PTO engagement and U-pilot safety functions.
AC17.2 (2.0.0.0) Auto Calibration software + parameters for A3:
Improvements on Clutch pedal, Power Shuttle and PTO behavior.
AC19 (2.3.1.0) New transmission software for HT5 tractors:
Improvement with low torque when changing direction.
EEM4 engine software 1.5.0 for N93/N103 tractors:
Unnecessary EGR actuator overload errors fixed (0-2791-06).
EEM4 engine software 1.5.0 for N103.4 ? N163 and T133-T213 tractors:
Will prevent DEF pumps from freezing in cold conditions.
Changed monitoring time of rail pressure prevents error codes (0-520294-0/16).

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 3

Vehicles Affected:

Valtra: BH145, BH165, BH180, BH185i, BH205
General:

Vehicle Version 1.10.
Released C3000 Software 3.17.208.
Corrected PVED Parameter for GIII.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 4

Vehicles Affected:

Massey Ferguson: MF9030
Valtra: BS3020H
General:

Vehicle Version 1.11.
Released C3000 Software 3.17.208.
Unreleased CAN flash ECU's Option.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 5

Vehicles Affected:

Challenger: 760(Made in Brazil), 860C(Made in Brazil)
Massey Ferguson: MF9795(Made in Brazil), MF9895(Made in Brazil)
Valtra: BC7800(Made in Brazil), BC8800(Made in Brazil)
General:

Vehicle Version 1.00.
Initial Release.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 6

Vehicles Affected:

Massey Ferguson: MF 2700-4700 Series
General:

Modifications of Label codes D and F for Dashboard configuration.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 7

Vehicles Affected:

AGCO: DTB Series
Challenger: MT600 D Series
Massey Ferguson: 8600 Series
General:

Vehicle Version 7.30.
Improvement of pictures to facilitate the connection to AGCO DTB tractors.
Compatibility with 2 hydraulic points suspension.
New cab suspension error code C250,C251,C252.
Stretch pressure signal zones in diagnostic screen to display the whole value in US unit.
Put the picture for ignition off/on back after the EXT label code setting.
Fixed a bug that displayed a wrong picture in the Auto4 label code management.
Fixed German translations for EXT label codes G.
Software:

New Suspended Cab Software V1.8.0 + parameters
Compatibility with 2 hydraulic points suspension.
New Linkage Software v2.16.00
Deactivation of quick soil engagement if linkage downshift speed is under 5%.
New Version of C1000 Software v2.1.3.140729
Compatibility with 8700 Multipad.
Come back to TECU v1.12.0 for Tier4i tractor and TECU V1.06.0 for Tier3 tractor
Risk of losing T-Handle calibration in some cases with v1.17.0.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 8

Vehicles Affected:

Massey Ferguson: MF7140, MF7150, MF7170, MF7180
General:

Vehicle Version 2.4.
Released C3000 Software 3.17.208.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 9

Vehicles Affected:

Challenger: MT 700D Series
General:

Vehicle Version 1.17.
Software:

"1.5.0" AGCO Power T4i engine software
DEF supply module bug fixes and improvements.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 10

Vehicles Affected:

Challenger: 520C, 540C, 560C
Massey Ferguson: MF9520, MF9540, MF9560
General:

Fix EMU not flashing issue.
New Axial Combine 3.0.0.2 software package.
Complete audit of engine files globally, all brought to correct and current version.
Fixed network scan issue for T4F machines, indicator LED would never go red if ECU was not present.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 11

Vehicles Affected:

Rogator: RG 900, RG 1100, RG 1300
Challenger: RG 900, RG 1100, RG 1300
General:

Vehicle Version 1.10.
Software:

"1.5.0" AGCO Power T4i engine software
DEF supply module bug fixes and improvements.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 12

Vehicles Affected:

Valtra: S3 Series
General:

Vehicle Version 5.3.
Add for Russia Tier2 Models.
Fix German translations for EXT label codes G.
Software:

New Dashboard DCC3 Software v2.3.5:
Fixed display on the Dashboard of transmission error codes.
Warning lamp when transmission error.
Added the possibility to boost the AC with Vistronic management.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 13

Vehicles Affected:

Valtra: S4 Series
General:

Vehilce Version 5.30.
Add models for Australia.
Fixed German translations for EXT label codes G.
Software:

New Dashboard IC1 Software v2.5.0:
Fix a displaying bug between kph and mph.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 14

Vehicles Affected:

Gleaner: S67, S68, S77, S78, S88
General:

New engine software for all S68, S78 and S88 Gleaners.
Corrected available engines for Australia.
Complete audit of engine files globally, all brought to correct and current version.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 15

Vehicles Affected:

TerraGator: 7300, 8300, 8400 9300, 9300B
General:

Vehicle Version 1.21.
Software:

"1.5.0" AGCO Power T4i engine software:
DEF supply module bug fixes and improvements.
"03.00" Hi Volume Liquid pump derate module software for TG9300B Hi Vol Liq system:
Fixes issue with reload function.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 16

Vehicles Affected:

Valtra: T4-Series
General:

VT11-vehicle v1.0.
Initial release of T series 4th generation tractors.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 17

Vehicles Affected:

Challenger: WR9770, WR9760, WR9740, WR9735, WR9725
Massey Ferguson: WR9770, WR9760, WR9740, WR9735, WR9725
General:

New authorization which can utilize parameter numbers above 200.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 18

Vehicles Affected:

Massey Ferguson: 5600 Series
General:

Vehicle Version 3.30.
Add in the flash screen the previous package for the Hydraulic Control Unit.
Improvement of Dyna-6 and Dyna-4 code H description for a better understanding.
Invert signals A1-B1 and A2-B2 to fix an error on the Hydraulic diagnostic view.
Software:

New Dyna-6 T1 and T2 Software 3.15.00 + New parameters for these Software:
Fast pedal start implement but not activated in the parameters.
Improvement of pedal behavior.
Repeatability starts with pallet improvement and pallet cold starts improvement.
New Hydraulic Control Unit Software v1.3.0:
Fixed a bug with untimely Kick Out.
Fixed a bug with the deactivation of float when locking the hydraulic (work with DCC3 v2.6.0).
New Dashboard DCC3 Software v2.6.0 for Dyna-4 and Dyna-6 tractors:
Fixed a bug with the deactivation of float when locking the hydraulic (work with Hydraulic Control Unit v1.3.0).
New Linkage Software for Dyna-6 v2.16.00:
Deactivation of quick soil engagement if linkage downshift speed is under 5%.
New Linkage and Transmission Software for Dyna-4 v1.11.0:
Deactivation of quick soil engagement if linkage downshift speed is under 5%.
Fast pedal start implement but not activated in the parameters.
Improvement of pedal behavior.
Repeatability starts with pallet improvement and pallet cold starts improvement.
New Version of C1000 Software v2.1.3.140729:
Compatibility with 8700 Multipad.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 19

Vehicles Affected:

Challenger: MT600E Series
Massey Ferguson: MF 8700 Series
General:

Vehicle Version 1.90.
Compatibility with Mulitpad option.
Compatibility with 2 hydraulic points suspension.
Warning message in the Vistronic diagnostic page.
Changed the max value of Vistronic speed control to 2150.
New cab suspension error code C250,C251,C252.
Buzzer Warning management on IC1 option.
Added step Ignition OFF/ON after IC1 flash.
Fixed a bug when flashing the whole software package.
Fixed a bug with error report creation on Tractor/Hydraulic connection.
Fixed a bug with the Steering valve parameter configuration.
Fixed a bug with external linkage button in the linkage diagnostic view.
Fixed a bug in the Front Hydraulic diagnostic screen.
Translate the instructions when changing the identifier of the valve.
Stretched pressure signal zones to display the whole value in US unit.
Fixed German translations for EXT label codes G.
Software:

New Suspended Cab Software V1.8.0 + parameters:
Compatibility with 2 hydraulic points suspension.
New Dashboard IC1 Software v2.2.0:
Fix a bug when flashing Dashboard : Hydraulic and Linkage priority are inconsistent.
Progress available on the Dashboard during gearbox calibration.
New Version of C1000 Software v2.1.3.140729:
Compatibility with 8700 Multipad.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 20

Vehicles Affected:

Challenger: MT400D Series
Iseki: i6600 Series
Massey Ferguson: 6600 Series
General:

Vehicle Version 7.10.
Improvement of Dyna-6 and Dyna-4 code H description for a better understanding.
Stretch pressure signal zones to display the whole value in US unit.
Removing on EXT speed limitation the Authorization code request.
Added pictures for new Suspended Cab parameters in the TECU label codes.
Added Step Ignition OFF/ON after EXT flash for previous software package.
Fixed German translations for EXT label codes G.
Software:

New Dyna-6 T1 and T2 Software 3.15.00 + New parameters for these Software:
Fast pedal start implement but not activated in the parameters.
Improvement of pedal behavior.
Repeatability starts with pallet improvement and pallet cold starts improvement.
New Dashboard DCC3 Software v2.6.0 for Dyna-4 and Dyna-6 tractors:
Fixed a bug on MF5600 with the deactivation of float when locking the hydraulic (work with Hydraulic Control Unit v1.3.0).
New Linkage Software for Dyna-6 and Dyna-VT v2.16.00:
Deactivation of quick soil engagement if linkage downshift speed is under 5%.
New Linkage and Transmission Software for Dyna-4 v1.11.0:
Deactivation of quick soil engagement if linkage downshift speed is under 5%.
Fast pedal start implement but not activated in the parameters.
Improvement of pedal behavior.
Repeatability starts with pallet improvement and pallet cold starts improvement.
New Version of C1000 Software v2.1.3.140729:
Compatibility with 8700 Multipad.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 21

Vehicles Affected:

Challenger: MT500 D Series
Iseki: i7600 Series
Massey Ferguson: 7600 Series
General:

Vehicle Version 7.10.
Improvement of Dyna-6 and Dyna-4 code H description for a better understanding.
Stretch pressure signal zones to display the whole value in US unit.
Removing on EXT speed limitation the Authorization code request.
Added pictures for new Suspended Cab parameters in the TECU label codes.
Added Step Ignition OFF/ON after EXT flash for previous software package.
Fixed German translations for EXT label codes G.
Software:

New Dyna-6 T1 and T2 Software 3.15.00 + New parameters for these Software:
Fast pedal start implement but not activated in the parameters.
Improvement of pedal behavior.
Repeatability starts with pallet improvement and pallet cold starts improvement.
New Dashboard DCC3 Software v2.6.0 for Dyna-4 and Dyna-6 tractors:
Fixed a bug on MF5600 with the deactivation of float when locking the hydraulic (work with Hydraulic Control Unit v1.3.0).
New Linkage Software for Dyna-6 and Dyna-VT v2.16.00:
Deactivation of quick soil engagement if linkage downshift speed is under 5%.
New Linkage and Transmission Software for Dyna-4 v1.11.0:
Deactivation of quick soil engagement if linkage downshift speed is under 5%.
Fast pedal start implement but not activated in the parameters.
Improvement of pedal behavior.
Repeatability starts with pallet improvement and pallet cold starts improvement.
New Version of C1000 Software v2.1.3.140729:
Compatibility with 8700 Multipad.
New engine software for 7620 Tier2 Dyna-VT tractors : Engine spec 66676 becomes 66643.

--------------------------------------------------------------------------------

Release Notes - 9/12/2014 (Update 0152)

EDT NOTES:

EDT Version: 1.72.14252.627

EDT Lite Creator:
Fixed an issue where new commercial vouchers were not compatible with EDT Lite Creator and caused no brands to show up.
EDT:
Changed the web service end-points used for licensing EDT.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 1

Vehicles Affected:

Challenger: MT700E, MT800E, MT900E
General:

Vehicle Version 2.0.
Enabled visibility of MT800E and MT900E Models.
Software:

3.2.0 Armrest
Added Reichhardt to approved Third Party Guidance.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 2

Vehicles Affected:

Challenger: CH648C, CH652CC
Fendt: 5275C, 5275CPL, 6335C, 6335CPL
Laverda: M400, M400LC, M400LCI, M410, M410LC
Massey Ferguson: 7360, 7360PL, 7370, 7370PL
Software:

Solved a bug in engine software for 7.4 Tier4i engines.
New Spanish Language file for TECU.
Diagnostics:

Added engine idle speed setup.

--------------------------------------------------------------------------------

Release Notes - 8/27/2014 (Update 0151)

EDT NOTES:

EDT Version: 1.72.14205.596


--------------------------------------------------------------------------------

CONTENT UPDATES - Part 1

Vehicles Affected:

AGCO: DTB Series
Challenger: MT600D Series - MT500D TechStar CVT Series - MT400D TechStar CVT Series
Iseki: i7600 Dyna-VT Series - i6600 Dyna-VT Series
Massey Ferguson: MF 8600 Series - MF 7600 Dyna-VT Series - MF 6600 Dyna-VT Series
Valtra: S3 Series
General:

Vehicle Version 7.0
Fixed bug that moved the DTB tractors to ATS brand: DTB tractors are now available with AGCO brand.
Fixed bug that displayed error T41EE after EXT-lite flash.

--------------------------------------------------------------------------------

Release Notes - 8/14/2014 (Update 0149)

EDT NOTES:

EDT Version: 1.72.14205.596


--------------------------------------------------------------------------------

CONTENT UPDATES - Part 1

Vehicles Affected:

Laverda: AL4 Evolution
Software:

Solved a bug in engine software for 7.4 Tier4i engines.
Diagnostic Surface:


--------------------------------------------------------------------------------

CONTENT UPDATES - Part 2

Vehicles Affected:

AGCO: DTB Series
Challenger: MT600 C Series
Massey Ferguson: 8600 Series
General:

Vehicle Version 6.9.
Improvement of the warning message after flashing an blank Auto5.
Improvement of pictures to facilitate the connection to Tier2, Tier3 EGR/SCR and Tier4i technology.
Fix a bug with the DCC3 and Auto4 label code for Tier3 tractors.
Fix some wrong Dutch translations in the label codes.
Software:

New Engine Software V1.5.0 for Tier2 and Tier4i tractors.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 3

Vehicles Affected:

Challenger: CH652CA
Fendt: 5275CA, 5275CPLA, 6335CA, 6335CPLA
Laverda: M400A, M400LCA, M400LCIA, M410A, M400LCA
Massey Ferguson: 7360A, 7360PLA, 7370A, 7370PLA
Software:

Solved a bug in engine software for 7.4 Tier4i engines.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 4

Vehicles Affected:

Challenger: CH645C, CH647C
Fendt: 5255L, 6275L
Laverda: M300, M310
Massey Ferguson: 7345S, 7347S
Software:

Solved a bug in engine software for 7.4 Tier4i engines.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 5

Vehicles Affected:

Challenger: CH648C, CH652CC
Fendt: 5275C, 5275CPL, 6335C, 6335CPL
Laverda: M400, M400LC, M400LCI, M410, M410LC
Massey Ferguson: 7360, 7360PL, 7370, 7370PL
Software:

Solved a bug in engine software for 7.4 Tier4i engines.
New Spanish Language file for TECU.
Diagnostics:

Added engine idle speed setup.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 6

Vehicles Affected:

Challenger: 520C, 540C, 560C
Massey Ferguson: MF9520, MF9540, MF9560
General:

Vehicle Version 1.4.
Fixed Engine software flash.
Enabled Injector Calibration.
Corrected Topcon System 150 vehicle profile measurements.
Updated Topcon System 150 Plugin v3.1.
Enabled visibility of C2100 software flash package for T4f models.
Fixed C2100 flash package error for T4i models.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 7

Vehicles Affected:

Rogator: RG900B
Challenger: RG900B
General:

Vehicle Version 1.6.
Enabled Injector Calibration.
Software:

"0.5.14 Rev. 1" AGCO Power engine software
Fixes an issue with engine starting hard once warmed up.
"2.1.3.140724" C1000 software
Fixes an issue with Norac icon not showing up in the persistent area.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 8

Vehicles Affected:

Challenger: 680B
Massey Ferguson: 9895
General:

Vehicle Version 1.52.
Fixed Class 8 engine selection on network scan.
Fixed error when loading 680B model.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 9

Vehicles Affected:

Valtra: S3 Series
General:

Vehicle Version 5.20.
Improvement of the warning message after flashing an blank Auto5.
Fix some wrong Dutch translations in the label codes.
Add the possibility to boost the AC with Vistronic management.
Software:

New Engine Software V1.5.0 for Tier2 and Tier4i tractor.
New CACHT Software (color armrest).

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 10

Vehicles Affected:

Valtra: S4 Series
General:

Vehicle Version 5.20.
Improvement of the warning message after flashing an blank Auto5.
Fix some wrong Dutch translations in the label codes.
Add the possibility to boost the AC with Vistronic management.
Software:

New Engine Software V1.5.0 for Tier2 and Tier4i tractor.
New CACHT Software (color armrest).
New Dashboard IC1 Software V2.4.0:
Fixed display on the Dashboard of transmission error codes.
Improvement of throttle pedal calibration.
Fix a bug with the differential lock function.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 11

Vehicles Affected:

Gleaner: S67,S68, S77, S78, S88
General:

Vehicle Version 1.5.
Fixed Engine software flash.
Enabled Injector Calibration.
Corrected Topcon System 150 vehicle profile measurements.
Updated Topcon System 150 Plugin v3.1.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 12

Vehicles Affected:

Massey Ferguson: 5600 Series
General:

Vehicle Version 3.10.
Improvement of the warning message after flashing an blank Auto5.
Add M26 error code for the Hydraulic Control Unit.
Fix some wrong Dutch translations in the label codes.
Software:

New Engine Software V1.5.0 for Tier3 and Tier4i tractors.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 13

Vehicles Affected:

Challenger: MT400D Series
Massey Ferguson: MF 6600 Series
Iseki: i6600 Series
General:

Vehicle Version 6.91.
Improvement of the warning message after flashing an blank Auto5.
Fix a bug on the HP braking system diagnostic screen.
Fix some wrong Dutch translations in the label codes.
Software:

New Engine Software V1.5.0 for Tier2 and Tier4i tractors.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 14

Vehicles Affected:

Challenger: MT500 D Series
Massey Ferguson: 7600 Series
Iseki: i7600 Series
General:

Vehicle Version 6.91.
Improvement of the warning message after flashing an blank Auto5.
Fix a bug on the HP braking system diagnostic screen.
Fix some wrong Dutch translations in the label codes.
Software:

New Engine Software V1.5.0 for Tier2 and Tier4i tractors.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 15

Vehicles Affected:

Massey Ferguson: MF 2700-4700 Series
General:

New parameters files: Some changes in the Linkage label codes.

--------------------------------------------------------------------------------

Release Notes - 8/5/2014 (Update 0148)

EDT NOTES:

EDT Version: 1.72.14205.596

General:

Fixed an issue where some fault tree files were not accessible in EDT.
Fixed an issue where EDT Lite Creator fails when trying to create an EDT Lite installer and displays a CABLib Compress Error.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 1

Vehicles Affected:

Challenger: WR9860, WR9870
Massey Ferguson: WR9860, WR9870
General:

Vehicle Version 0.70.
New main machine software version 2.0.7
Enables Ground Speed Calibration.
Fixed Header Functions Graphical Surface.
Update Fan Control Manifold Picture.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 2

Vehicles Affected:

RoGator: RG 700
Challenger: RG 700
General:

Vehicle Version 1.6.
Enabled OBE software flash.
Enabled OBE pump calibration.
Fixed Charge Pressure gauge in Hydrostatic Drive diagnostic surface.
Fixed Hydraulic Temperature tank in Hydrostatic Drive diagnostic surface.
Software:

"SC1 1.0.0.140728.900" Armrest software
Eliminates cases where machine was going into limited mode due to certain errors from OBE pump.
"902109000.AKM004C002.V102"
Allows for OBE pump calibration. NOTE - Pump calibration is required after flashing this software version.
"2.0.1.140724 & 2.1.30140724"
Contains new AGCONTROL software version 1.3.2 which includes PWM min & max settings.

--------------------------------------------------------------------------------

Release Notes - 7/3/2014 (Update 0147)

EDT NOTES:

EDT Version: 1.72.14181.854

General:

Updated EDT to display and use the new EDT serial number.
Added a selectable Voucher Code display to the EDT Utilities window.
Fixed an issue where EDT did not properly scale the UI when running on some localized OSes.
Fixed a UI issue where the alignment of DTC warning text is covering DTC codes when EDT is not in 1024x768 resolution.
Updated EDT license refresh logic.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 1

Vehicles Affected:

Valtra: T-Series, N-Series, A-Series
General:

Vehicle Version 2.88.
ISOAD (ID 220) set visible for AC16 and AC18 vehicles.
Fixed the Network Scan page of LRC models (SCR and NOx information removed).
Multi Clutch tests are available on Diagnostic Test page for AC19 models:
Manual calibrations without saving the values.
Updated plug-ins:
AG3000 v2.7.
C3000 v2.4.
Topcon System 150 v3.0.
PVED-CL v2.7.
EEM3 v2.2.
EEM4 v4.5.
Diagnostic Surface:

Cruise diagnostic pages added for N3/T3 facelift and LRC models.
Order of Difflock switch status changed according to tractor.
Reference text added for A3 gas pedal adjustment page.
Signals FI03, FI08 and FI09 coupled on CVT diagnostic page.
Rearward solenoid changed to Reverse solenoid on Power Shuttle diagnostic pages.
Fault Trees:

Initial version for LRC vehicles.
General update for all existing vehicles.
Calibrations:

Automatic Calibration for multidisc clutches and clutch pedal for Hitech 5PS (AC19).
New service codes for not finished TC1 calibrations for AC19.3, AC19.34 and AC19.4.
Text in the automatic calibration pop-up window shorted to Calibration finished.
Instruction text for Speed Sensor Calibration updated with speed information.
Fixed calibration service codes for Driving speed, Wheel Angle Sensor, Creeper (HT5).
Software:

Software packages:
AC15.3 (2.2.1.0) fixed TC1 automatic calibration parameters.
AC15.3 (2.2.2.0) fixed Creeper neutral problem.
AC15.33 (2.2.1.0) fixed TC1 automatic calibration parameters.
AC15.33 (2.2.2.0) fixed Creeper neutral problem.
AC15.34 (2.2.2.0) fixed Creeper neutral problem.
AC16.3 (2.1.0.0) with updated sw 1.0.1.0 (fixes bug in I/O-test).
AC19 (2.1.2.0) with updated sw 1.0.1.0 (fixed bug in I/O-test).
AC19 (2.2.0.0) HT5 Auto Calibration sw + parameters:
TC1 calibration values can now be read by EDT from AC19.3, AC19.34 and AC19.4.
New indexes (455 and 456) for maximum start out gear limitation for AC19 models.
AC19 (2.2.1.0) HT5 Auto Calibration sw + parameters:
Fixed visibility of Creeper fault codes.
ROTE-parameters available via special download in ISOAD package (1.0.2.0).
"4.1.K.12 p2" for AG3000 (Bug fixes and improvements).
"3.17.52ag" for C3000 terminal (Bug fixes and improvements).
"2.13.04" for Topcon System 150 (Bug fixes and improvements).
Updated engine software for T193H and T213V LRC models.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 2

Vehicles Affected:

Valtra: BH145, BH165, BH180, BH185i, BH205
General:

Vehicle Version 1.90.
Updated System 150 Plug-In.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 3

Vehicles Affected:

Massey Ferguson: MF9030
Valtra: BS3020H
General:

Vehicle Version 1.10.
Updated System150 Plug-in.
Updated Norac Firmware to E2UC-UP1130.fw2.
Updated C1000 Firmware to 1.8.0.
Released FaultTree.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 4

Vehicles Affected:

Massey Ferguson: MF 2700-4700 Series
General:

Vehicle Version 1.90.
New warning message when cleaning up an Auto7.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 5

Vehicles Affected:

FELLA: SM8312, SM9314
Software:

Version 1.0.7:
Compatibility with JD consoles.
Diagnostics:

Version 1.7.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 6

Vehicles Affected:

Fendt: 8380P, 8380P AL, 8410P, 8410P AL, 9490X, 9490X AL
Massey Ferguson: 7380, 7380 AL, 7382, 7382 AL, 9380, 9380 AL
Software:

New EXT Software Version 52.
New NT01 MPC Software Version 973.
Diagnostics:

Release v1.2:
Updated EXT parameters (Propulsion, Guidance).

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 7

Vehicles Affected:

ATS: HiPer AG
General:

Removed Software Update to provide compatibility with TRU 2.8.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 8

Vehicles Affected:

Challenger: MT600 D Series
Massey Ferguson: 8600 Series
General:

Vehicle Version 6.80.
Correction of a bug that not displaying the picture for ignition off/on after setting EXT parameters.
New warning message when cleaning up an Auto5.
Add a warning message after flashing an blank Auto5.
Software:

New Dashboard DCC software v2.6.0 : Fixed display on the Dashboard of transmission error codes.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 9

Vehicles Affected:

Challenger: CH652CA
Fendt: 5275CA, 5275CPLA, 6335CA, 6335CPLA
Laverda: M400A, M400LCA, M400LCIA, M410A, M400LCA
Massey Ferguson: 7360A, 7360PLA, 7370A, 7370PLA
Software:

New EXT-LT Software Version 17.
Diagnostics:

Vehicle diagnostic content release v1.14:
Modified parameters for Counter restore.
Setup of Livetime counters.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 10

Vehicles Affected:

Challenger: CH648C, CH652C
Fendt: 5275C, 5275CPL, 6335C, 6335CPL
Laverda: M400, M400LC, M400LCI, M410, M410LC
Massey Ferguson: 7360, 7360PL, 7370, 7370PL
Diagnostics:

Vehicle diagnostic content release v1.20:
Improvements on Parameter restore.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 11

Vehicles Affected:

Massey Ferguson: MF32
General:

Vehicle Version 1.10.
New Release.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 12

Vehicles Affected:

Massey Ferguson: MFSR
General:

Vehicle Version 1.10.
New Release.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 13

Vehicles Affected:

Massey Ferguson: MF7140, MF7150, MF7170, MF7180
General:

Vehicle Version 2.3.
Updated System 150 Plug-In.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 14

Vehicles Affected:

Challenger: MT700E
General:

Vehicle Version 1.5.
Corrected Hitch option selection.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 15

Vehicles Affected:

Challenger: 520C, 540C, 560C
Massey Ferguson: 9520, 9540, 9560
General:

Vehicle Version 1.3.
Added Fan Pitch Controller to T4f MF9520 & 520C.
Fixed Tier2 Network Scan.
Fixed Topcon System 150 Vehicle Profile configuration.
Software:

"3.0.0.1" Axial Combine software:
Fixes AG3000 directional alarm.
Updated EMU repository:
Added Intercept Ambient Temp.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 16

Vehicles Affected:

Challenger: RG600
General:

Vehicle Version 2.7.
Updated Plug-in:
AGCO SISU POWER Tier4 Final Diagnostics v1.3.
Configuration:

Option "Clean Water Tank Sensor" is available for all model years (Note: update ECU Sprayer to version BIN_01.06).
Software:

Update software C1000 Terminal (CONS_01.08.zip) (Note: is only compatible with BIN_01.06.zip and CHS_01.06.zip).
Update software ECU Sprayer (BIN_01.06.zip) (Note: is only compatible with CONS_01.08.zip and CHS_01.06.zip).
Update engine software RG645C/RG655C.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 17

Vehicles Affected:

Challenger: RG 700
RoGator: RG 700
General:

Vehicle Version 1.5.
Software:

"3.0" lighting module software:
Fixes issue with ladder and park brake when using delay light shutdown.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 18

Vehicles Affected:

Valtra: S3 Series
General:

Vehicle Version 5.70.
Correction of a bug that not displaying the DCC software when a monochrome screen was selected in EDT.
New warning message when cleaning up an Auto5.
Add a warning message after flashing an blank Auto5.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 19

Vehicles Affected:

Gleaner: S67,S68, S77, S78, S88
General:

Vehicle Version 1.4.
Fixed PVED network scan on S67, S77.
Software:

Removed old fuse panel software.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 20

Vehicles Affected:

Challenger: TG 8300B
TerraGator: TG 7300B, TG 8300B, TG 8400B, TG 9300B
General:

Vehicle Version 1.19.
Corrected engine Air System diagnostic surface.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 21

Vehicles Affected:

Challenger: WR9725, WR9740, WR9760, WR9770
Massey Ferguson: WR9725, WR9740, WR9760, WR9770
General:

Updated Main Controller Software (1.4.0).
Updated C1000 Software (1.3.0):
Adds support for the 5300 draper header.
Improved DWA electrical fault detection.
Improved 5200 draper header startup on WR9760 and WR9770 machines.
Improved pump and motor calibration startup in drive range 2 and 3.
Improved C1000 speedometer adjustment.
Auxiliary pump can now be used without enabling the DWA.
Removed ambient temperature display.
Adds 5200 draper header velocity fuse support.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 22

Vehicles Affected:

Challenger: WR9860, WR9870
Massey Ferguson: WR9860, WR9870
General:

Updated Main Controller Software (2.0.5).
Updated C1000 Software (2.0.5):
Improved support for single sickle 5300 draper header.
Fixed C1000 icons and object update problems.
Improved C1000 speedometer adjustment.
Improved DWA electrical fault detection.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 23

Vehicles Affected:

Massey Ferguson: 5600 Series
General:

Vehicle Version 3.50.
Fix a bug in the PTO diagnostic view for Dyna-4 tractors.
New warning message when cleaning up an Auto5.
Add a warning message after flashing an blank Auto5.
Software:

New Hydraulic Control Unit software v1.2.0:
Fix the bug with the infinity Kick Out.
Fix a bug with flow regulation.
New Dyna-6 transmission software v3.14.0: Correction of a bug with the SPTO on GPA50.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 24

Vehicles Affected:

Challenger: MT600 E Series
Massey Ferguson: 8700 Series
General:

Vehicle Version 1.70.
New warning message when cleaning up an Auto5.
Add a warning message after flashing an blank Auto5.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 25

Vehicles Affected:

Challenger: MT400 D Series
Massey Ferguson: 6600 Series
Massey Ferguson: 6600 Series
Iseki: i6600 Series
General:

Vehicle Version 6.80.
New warning message when cleaning up an Auto5.
Add a warning message after flashing an blank Auto5.
Software:

New Dyna-6 transmission software v3.14.0 : Correction of a bug with the SPTO on GPA50.
New Dashboard DCC software v2.5.0 for Dyna-VT tractors:
Fixed display on the Dashboard of transmission error codes.
Fixed a bug that could cause the loss of SV1/SV2 changing range or starting.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 26

Vehicles Affected:

Challenger: MT500 D Series
Massey Ferguson: 7600 Series
Iseki: i7600 Series
General:

Vehicle Version 6.80.
New warning message when cleaning up an Auto5.
Add a warning message after flashing an blank Auto5.
Software:

New Dyna-6 Transmission software v3.14.0 : Correction of a bug with the SPTO on GPA50.
New Dashboard DCC software v2.5.0 for Dyna-VT tractors:
- Fixed display on the Dashboard of transmission error codes.
- Fixed a bug that could cause the loss of SV1/SV2 changing range or starting.

--------------------------------------------------------------------------------

Release Notes - 6/10/2014 (Update 0145)

EDT NOTES:

EDT Version: 1.71.14118.567


--------------------------------------------------------------------------------

CONTENT UPDATES - Part 1

Vehicles Affected:

Challenger: CH654, CH658
Fendt: 8400, 9470X
Massey Ferguson: 7280, 7282, 9280
Software:

New Engine Software v1.4.0.
Diagnostics:

Vehicle diagnostic content release v1.7.
Engine Plugin v4.5.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 2

Vehicles Affected:

Fendt: 8380P, 8380P AL, 8410P, 8410P AL, 9490X, 9490X AL
Massey Ferguson: 7380, 7380 AL, 7382, 7382 AL, 9380, 9380 AL
Diagnostics:

Release v1.1
Updated NT01 parameters.
Updated EXT parameters.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 3

Vehicles Affected:

Challenger: CH652CA
Fendt: 5275A, 5275PLA, 6335A, 6335PLA
Laverda: M400A, M400LCA, M400LCIA, M410A, M400LCA
Massey Ferguson: 7360A, 7360PLA, 7370A, 7370PLA
Software:

New Engine Software v1.4.0.
Diagnostics:

Vehicle diagnostic content release v1.13.
Engine Plugin v4.5.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 4

Vehicles Affected:

Challenger: CH644
Fendt: 5220E
Laverda: M200
Massey Ferguson: 7244
Software:

New Engine Software v1.4.0.
Diagnostics:

Vehicle diagnostic content release v1.6.
Engine Plugin v4.5.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 5

Vehicles Affected:

Challenger: CH645C, CH647C
Fendt: 5255L, 6275L
Laverda: M300, M310
Massey Ferguson: 7345S, 7347S
Software:

New Engine Software v1.4.0.
Diagnostics:

Vehicle diagnostic content release v1.7.
Engine Plugin v4.5.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 6

Vehicles Affected:

Challenger: CH648C, CH652C
Fendt: 5275C, 5275CPL, 6335C, 6335CPL
Laverda: M400, M400LC, M400LCI, M410, M400LC
Massey Ferguson: 7360, 7360PL, 7370, 7370PL
Software:

New Language Files (EN, IT, DE, FR)
New Engine Software v1.4.0.
Diagnostics:

Vehicle diagnostic content release v1.19.
Engine Plugin v4.5.

--------------------------------------------------------------------------------

Release Notes - 5/30/2014 (Update 0144)

EDT NOTES:

EDT Version: 1.71.14118.567


--------------------------------------------------------------------------------

CONTENT UPDATES - Part 1

Vehicles Affected:

Challenger: 9860, 9870
Massey Ferguson: 9860, 9870
General:

Added new vehicle profile for AG3000.
CARB Engine Update:
Added the latest software for T4F Engines.
Software:

Added Version 2.0.4 software to Main ECU software Flash.
Added Software Version script to network scan for Main ECU:
Links to software flash page if Main ECU software is not up to date.
Added Version 2.0.4 software to C1000.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 2

Vehicles Affected:

Fendt: 8380P, 8380P AL, 8410P, 8410P AL, 9490X, 9490X AL
Massey Ferguson: 7380, 7380 AL, 7382, 7382 AL, 9380, 9380 AL
Software:

New NT01 software.
New EXT software.
New Jobcomputer Flash-procedure.
Fault Trees:

Initial release of fault trees.
Diagnostics:

Release v1.0.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 3

Vehicles Affected:

ATS: System 150 (universal support)
General:

Updated software version for System 150 to 2.13.04.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 4

Vehicles Affected:

Challenger: MT600 D Series
Massey Ferguson: 8600 Series
General:

Vehicle Version 6.70.
Correction of a bug in the label codes for Tier3 tractors.
Correction of a bug that displaying the error T41EE after the EXT-lite flash.
Add a message after the Armrest software flash.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 5

Vehicles Affected:

Challenger: CH648C, CH652C
Fendt: 5275C, 5275CPL, 6335C, 6335CPL
Laverda: M400, M400LC, M400LCI, M410, M410LC
Massey Ferguson: 7360, 7360PL, 7370, 7370PL
Software:

New SD files v0004.0013.
Diagnostics:

Vehicle diagnostic content release v1.18.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 6

Vehicles Affected:

Challenger: CH652CA
Fendt: 5275CA, 5275CPLA, 6335CA, 6335CPLA
Laverda: M400A, M400LCA, M400LCIA, M410A, M410LCA
Massey Ferguson: 7360A, 7360PLA, 7370A, 7370PLA
Software:

New NT01 Software.
New SD files v0005.0008.
Diagnostics:

Vehicle diagnostic content release v1.12.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 7

Vehicles Affected:

Challenger: MT 700D Series
General:

Vehicle Version 1.14.
Software:

"0.462.6527.0" Transimission software:
Fixes critical bug where transmission module can become unresponsive after flash.
Previously released software package now available for Armrest and Transmission.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 8

Vehicles Affected:

Challenger: MT 700E
General:

Vehicle Version 1.4.
Software:

"0.5.14" AGCO Power engine software:
Updated to align with CARB requirements.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 9

Vehicles Affected:

Challenger: 520C, 540C, 560C
Massey Ferguson: 9520, 9540, 9560
General:

Vehicle Version 1.1.
Software:

"0.5.14" AGCO Power engine software:
Updated to align with CARB requirements.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 10

Vehicles Affected:

Rogator: RG900, RG1100, RG1300, RG900B, RG1100B, RG1300B
General:

Vehicle Version 1.5.
Software:

"0.5.14" AGCO Power engine software:
Updated to align with CARB requirements.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 11

Vehicles Affected:

Challenger: RG 700
RoGator: RG 700
General:

Fixed AG3000 AGI-4 flash.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 12

Vehicles Affected:

Valtra: S232-S352
General:

Vehicle Version 5.2.
Correction of a wrong display in the Transmission label codes for EXT-Lite 1.7 codes.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 13

Vehicles Affected:

Gleaner: S68, S78, S88
General:

Vehicle Version 1.2.
Software:

"0.5.14" AGCO Power engine software:
Updated to align with CARB requirements.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 14

Vehicles Affected:

Challenger: TG 8300, TG 8300B
TerraGator: TG 7300B, TG 8300B, TG 8400B, TG 9300B
General:

Vehicle Version 1.18.
Software:

"0.5.14" AGCO Power engine software:
Updated to align with CARB requirements.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 15

Vehicles Affected:

Challenger: WR9770, WR9760, WR9740, WR9735, WR9725
Massey Ferguson: WR9770, WR9760, WR9740, WR9735, WR9725
General:

Added new vehicle profile for AG3000.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 16

Vehicles Affected:

Challenger: MT500 D Series
Iseki: i7600 Series
Massey Ferguson: 7600 Series
General:

Vehicle Version 6.70.
Correction of a bug that prevented flashing the engine software.
Correction of a bug that displaying the error T41EE after the EXT-lite flash for Dyna-VT tractors.
Adjusting models available in Africa/Middle East.
Improvement of VIN configuration for ISEKI.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 17

Vehicles Affected:

Challenger: MT400 D Series
Iseki: i6600 Series
Massey Ferguson: 6600 Series
General:

Vehicle Version 6.70.
Correction of a bug that prevented flashing the engine software.
Correction of a bug that displaying the error T41EE after the EXT-lite flash for Dyna-VT tractors.
Improvement of VIN configuration for ISEKI.

--------------------------------------------------------------------------------

Release Notes - 5/9/2014 (Update 0143)

EDT NOTES:

EDT Version: 1.71.14118.567


--------------------------------------------------------------------------------

CONTENT UPDATES - Part 1

Vehicles Affected:

Challenger: TG 8300, TG 8300B
TerraGator: 7300B, 8300B, 8400B, 9300B
General:

Vehicle Version 1.17.
Software:

"2.13.04" Topcon System 150 software:
Bug fixes and improvements.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 2

Vehicles Affected:

Rogator: RG900, RG1100, RG1300, RG900B, RG1100B, RG1300B
Challenger: RG900, RG1100, RG1300
General:

Vehicle Version 1.4.
Topcon System 150 Plug-In Version 3.0.
Auto-Guide 3000 Plug-In Version 2.7.
Norac UC5 Plug-In Version 1.5.
Software:

"3.17.52ag" C3000 terminal software:
Bug fixes and improvements.
"4.1.K.12 p2" AG3000 software:
Bug fixes and improvements.
"2.13.04" Topcon System 150 software:
Bug fixes and improvements.
Removed outdated Norac software.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 3

Vehicles Affected:

Challenger: RG 700
RoGator: RG 700
General:

Vehicle Version 1.4.
Auto-Guide 3000 Plug-In Version 2.7.
Norac UC5 Plug-In Version 1.5.
Software:

"3.17.52ag" C3000 terminal software:
Bug fixes and improvements.
"4.1.K.12 p2" AG3000 software:
Bug fixes and improvements.
Removed outdated Norac software.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 4

Vehicles Affected:

Massey Ferguson: 1436, 6631
Challenger: 1436, 6631
Sunflower: 1436, 6631
Software:

Updated bios file to version 1.01: (SmartTillage_MainECU_EXTLT_01_00_01.bios).

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 5

Vehicles Affected:

Challenger: 520C, 530C, 540C, 550C, 560C
Fendt: 9390R, 9450R, 9480R
Massey Ferguson: 9520, 9530, 9540, 9550, 9560
General:

Updated TIER4F INI file (vehicle dimension).
AGI3000: Added C3000 virtual terminal (New Release).
FIRMWARE: C3000; v(3.17.52).
Software:

C3000: (x30_AGCO_V3.17.52_rel_full_upgrade).
FIRMWARE: AG3000: From 3.6K9P12, To 4.1K12p2.
AG3000: From 3.13.55ag, To 3.17.52ag.
FIRMWARE: SYS150: From 3.6A10p2, To 4.1A12p2.
SYS150: From 2.10.15, To 2.13.04.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 6

Vehicles Affected:

Challenger: 660B, 670B, 680B
Fendt: 9300R, 9350R
Massey Ferguson: 9695, 9795, 9895
General:

SYS150: Firmware 4.1A12p2 /sw: 2.13.04.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 7

Vehicles Affected:

Gleaner: R65, R75, R66, R76, S67, S77, S68, S78, S88
General:

Added C3000 TO AG3000.
Added S78, S88 combine missing from content.
Added C3000 software package to support SYSTEM 153 (New Release).
Added LTM Graphical To Support service tool.
Added rotor gear software package (EIP software v3.2) to fix alarm.
C3000 FirmWare v3.17.52.
AG3000: From 3.13.55ag, To 3.17.52ag. (New Release)
System 150: From 2.10.15, To 2.13.04. (New Release)
Software:

Legacy software package (FP V2.4;EIP V2.9; CIC V7.20).
C3000(x30_AGCO_V3.17.52_rel_full_upgrade.
EIP V3.1.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 8

Vehicles Affected:

FELLA Triple Mower: SM 8312 TL-RCB / SM 8312 TL-KCB / SM 9314 TL-KCB
General:

New model 8312TL-KCB.
Software:

Bios version 1.0.5 (updated object pool).
Diagnostics:

Diagnostic content version 1.6.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 9

Vehicles Affected:

Challenger: 8000 Series, 9000 Series
Massey Ferguson: 8000 Series, 9000 Series
White: 8000 Series, 9000 Series
General:

Updated C3000:
Firmware: C3000; (v3.17.52).
Software: C3000; (x30_AGCO_V3.17.52_rel_full_upgrade).

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 10

Vehicles Affected:

Massey Ferguson: 4608, 4609, 4610
Software:

New engine software files Version 1.4.7.
Diagnostic:

Updated EEM4 plugin Version 4.5.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 11

Vehicles Affected:

Massey Ferguson: MF 2700-4700 Series
General:

Vehicle Version 1.70.
Correction on Linkage and Dashboard configuration page.
Correction on differential lock and 4 Wheel drive diagnostic view.
Modification of the name of the linkage configuration.
Add pictures to describe how to connect the diagnostic tool.
New map to adjust models/options available.
Implementation of stored error codes.
Add the possibility to diagnose AGCOMMAND.
Software:

New Linkage Software: New error codes management.
New Transmission Software: New error codes management.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 12

Vehicles Affected:

Challenger: MT540, MT560, MT570, MT580
Massey Ferguson: 7350, 7370, 7390, 7415
Valtra: BT150, BT170, BT190, BT210
General:

Vehicle Version 3.9.
Software:

New AG3000 Firmware.
New AG150 Firmware.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 13

Vehicles Affected:

Challenger: MT600 C Series
Massey Ferguson: 8600 Series
General:

Vehicle Version 6.60.
Correction of a bug in the dashboard table of constants for negative values.
Correction of Dutch translation in transmission configuration.
Modification of "Lifting label code" to "Linkage label code."
Add auto configuration of Code AA after flashing the Dashboard and EXT-Lite.
Backup calibration when changing EXT-Lite parameters.
Software:

New TECU software v1.17: bugs resolved.
New AG3000 Firmware.
New AG150 Firmware.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 14

Vehicles Affected:

Valtra: S4 Series
General:

Vehicle Version 5.1.
Initial Release.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 15

Vehicles Affected:

Valtra: S3 Series
General:

Vehicle Version 5.1.
Correction of a bug in the dashboard table of constants for negative values.
Correction of Dutch translation in transmission configuration.
Modification of "Lifting label code" to "Linkage label code."
Add auto configuration of Code AA after flashing the Dashboard and EXT-Lite.
Backup calibration when changing EXT-Lite parameters.
Software:

New Transmission EXT-Lite software v1.07:
Correction of bugs.
New errors management.
Filter the light brake pressure to prevent accidental ignition.
New Dashboard DCC software V2.3.3: Compatibility with EXT-Lite v1.07.
New Keyboard software v1.09:
Modifications for PorchLight (T4F).
Management of side lights with CAN.
Management of lights for Japan.
New ISO software v1.17: Bugs resolved.
New Linkage software v2.14:
Correction of a bug with intermix.
TIC: Correction of a bug in the position regulation (Transport mode).
DUAL: Correction of a bug in the management of DUAL EHS.
New AG3000 Firmware.
New AG150 Firmware.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 16

Vehicles Affected:

Iseki: i5600 Series
Massey Ferguson: 5600 Series
General:

Vehicle Version 3.0.
Correction of a bug in the dashboard table of constants for negative values.
Correction of a bug, where DEF-Dosing-Quantity was no longer reported.
Modification of the name of the Dashboard Hours in the configuration screen.
Modification of diagnostic connection name.
New management of Keyboard configuration.
Add auto configuration of Code AA after flashing the Dashboard.
Add some models available in Asia.
Modification of "Lifting label code" to "Linkage and transmission label code" for Dyna-4 tractors.
Software:

New Dashboard DCC software v2.3.0: Ensure consistency with others models.
New Keyboard software v1.09:
Modifications for PorchLight (T4F).
Management of side lights with CAN.
Management of lights for Japan.
New TECU software v1.17: Bugs resolved.
New Linkage software v2.14 for Dyna-6 tractors:
Correction of a bug with intermix.
TIC: Correction of a bug in the position regulation (Transport mode).
DUAL: Correction of a bug in the management of DUAL EHS.
New Engine Software:
Fix Throttle error code (SPN91) on 33AWI and 44AWIC.
New Downstream Nox sensor activation parameters on 44AWIC.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 17

Vehicles Affected:

Challenger: MT600E Series
Massey Ferguson: MF 8700 Series
General:

Vehicle Version 1.50.
Correction of Dutch translation in transmission configuration.
Modification of "Lifting label code" to "Linkage label code."
Correction of multiple bugs in configuration page.
Correction of a bug that not displaying DEF dosing quantity.
Correction for Challenger Armrest.
Correction of a bug that not flashing the individual file.
Correction of a bug that displaying an error when reading the stored error codes.
Modification of injector parameters.
Modification of diagnostic connection name.
Hide Digital I/O in engine diagnostic view.
New management of Keyboard configuration.
Add auto configuration of Code AA after flashing the Dashboard and EXT-Lite.
Add pictures in the Linkage configuration.
Add Auxiliary hydraulic temperature in diagnostic view for Dyna-VT tractors.
Add the possibility to boost the AC with Vistronic management.
Add the possibility to flash a specific file on the engine connection.
Implementation of C3000 option in the ISO connection.
Backup calibration when changing EXT-Lite parameters.
Software:

New TECU software v1.17: Bugs resolved.
New Dashboard IC1 software v2.1.0: Bugs resolved and new management of Vistronic/AC available.
New Linkage software v1.5.0: Bugs resolved with Datatronic4.
New Engine software: New EPA/CARB inducement strategy.
New AG3000 Firmware.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 18

Vehicles Affected:

AGCO: DTA - RT Series
Challenger: MT500B - MT600B Series
Massey Ferguson: 6400 - 7400 - 8400 Series
General:

Vehicle Version 2.6.
Software:

New AG150 Firmware.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 19

Vehicles Affected:

Challenger: MT500 D Series
Iseki: i7600 Series
Massey Ferguson: 7600 Series
General:

Vehicle Version 6.60.
Correction of a bug in the PTO diagnostic view for Dyna-6/Short console tractors.
Correction of a bug in the dashboard table of constants for negative values.
Correction of Dutch translation in transmission configuration for Dyna-VT tractors.
Modification of "Lifting label code" to "Linkage label code."
Correction of rear axle diagnostic view for Dyna-6 tractors.
Correction of wrong braking system overview that was displaying.
Correction of displaying CCD-C1000 on Tractor connection.
Modification of the name of the Dashboard Hours in the configuration screen.
Modification of diagnostic connection name.
Correction of a bug, where DEF-Dosing-Quantity was no longer reported.
New management of Keyboard configuration.
Add Auxiliary hydraulic temperature in diagnostic view for Dyna-VT tractors.
Add pictures on configuration screen for DCC and Transmission Code AA for MF7624-7626 Dyna-6.
Add auto configuration of Code AA after flashing the Dashboard and EXT-Lite.
Add MF7614 for Africa and Middle East.
Add for Iseki the models 7615 Dyna4, 7616 Dyna6, 7626 Dyna6.
Add some SCR models available in Asia.
Backup calibration when changing EXT-Lite parameters.
Software:

New Transmission EXT-Lite software v1.07 for Dyna-VT tractors:
Correction of bugs.
New errors management.
Filter the light brake pressure to prevent accidental ignition.
New Dashboard DCC software v2.3.0: Compatibility with EXT-Lite V1.07.
New Keyboard software v1.09:
Modifications for PorchLight (T4F).
Management of side lights with CAN.
Management of lights for Japan.
New TECU software v1.17: Bugs resolved and compatibility with the new suspended cab.
New Linkage software v2.14 for Dyna-6 and Dyna-VT tractors:
Correction of a bug with intermix
TIC: Correction of a bug in the position regulation (Transport mode).
DUAL: Correction of a bug in the management of DUAL EHS.
New Engine software for 7615-7624 Dyna-VT tractors.
New AG3000 Firmware.
New AG150 Firmware.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 20

Vehicles Affected:

Challenger: MT400 D Series
Iseki: i6600 Series
Massey Ferguson: 6600 Series
General:

Vehicle Version 6.60.
Correction of a bug in the dashboard table of constants for negative values.
Correction of Dutch translation in transmission configuration for Dyna-VT tractors.
Modification of "Lifting label code" to "Linkage label code."
Correction of displaying CCD-C1000 on Tractor connection.
Modification of the name of the Dashboard Hours in the configuration screen.
Modification of diagnostic connection name.
Correction of a bug, where DEF-Dosing-Quantity was no longer reported.
New management of Keyboard configuration.
Add Auxiliary hydraulic temperature in diagnostic view for Dyna-VT tractors.
Add auto configuration of Code AA after flashing the Dashboard and EXT-Lite.
Add for Iseki the models 6616 Dyna6, 6612 Dyna4, 6613 Dyna4, 6615 Dyna4.
Add some models available in Asia.
Backup calibration when changing EXT-Lite parameters.
Software:

New Transmission EXT-Lite software v1.07 for Dyna-VT tractors:
Correction of bugs.
New errors management.
Filter the light brake pressure to prevent accidental ignition.
New Dashboard DCC software v2.3.0: Compatibility with EXT-Lite v1.07.
New Keyboard software v1.09:
Modifications for PorchLight (T4F).
Management of side lights with CAN.
Management of lights for Japan.
New TECU software v1.17: Bugs resolved.
New Linkage software v2.14 for Dyna-6 and Dyna-VT tractors:
Correction of a bug with intermix.
TIC: Correction of a bug in the position regulation (Transport mode).
DUAL: Correction of a bug in the management of DUAL EHS.
New MF6613 MT465D Dyna-6 engine software: fix wrong software name information in ECU after updating.
New Engine software for MF6614-6616 Dyna-VT tractors and MT475-495D TechStar CVT tractors.
New AG3000 Firmware.
New AG150 Firmware.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 21

Vehicles Affected:

Iseki: i5600 Series
Massey Ferguson: 5600 Series
General:

Vehicle Version 6.60.
Correction of a bug in the dashboard table of constants for negative values.
Correction of a bug, where DEF-Dosing-Quantity was no longer reported.
Modification of the name of the Dashboard Hours in the configuration screen.
Modification of diagnostic connection name.
New management of Keyboard configuration.
Add auto configuration of Code AA after flashing the Dashboard.
Add some models available in Asia.
Modification of "Lifting label code" to "Linkage and transmission label code" for Dyna-4 tractors.
Software:

New Dashboard DCC software v2.3.0: Ensure consistency with others models.
New Keyboard software v1.09:
Modifications for PorchLight (T4F).
Management of side lights with CAN.
Management of lights for Japan.
New TECU software v1.17: Bugs resolved.
New Linkage software v2.14 for Dyna-6 tractors:
Correction of a bug with intermix.
TIC: Correction of a bug in the position regulation (Transport mode).
DUAL: Correction of a bug in the management of DUAL EHS.
New Engine Software:
Fix Throttle error code (SPN91) on 33AWI and 44AWIC.
New Downstream Nox sensor activation parameters on 44AWIC.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 22

Vehicles Affected:

Challenger: MT700 C, MT800 C, MT900 C
General:

Vehicle Version 3.24.
Topcon System 150 Plug-In Version 3.0.
Auto-Guide 3000 Plug-In Version 2.7.
C3000 Plug-In Version 2.4.
Software:

"3.0.0" Armrest software:
See software package for more information.
"3.17.52ag" C3000 terminal software:
Bug fixes and improvements.
"4.1.K.12 p2" AG3000 software:
Bug fixes and improvements.
"2.13.04" Topcon System 150 software:
Bug fixes and improvements.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 23

Vehicles Affected:

Challenger: MT 700D Series
General:

Vehicle Version 1.13.
Topcon System 150 Plug-In Version 3.0.
Auto-Guide 3000 Plug-In Version 2.7.
C3000 Plug-In Version 2.4.
Software:

"3.0.0" Armrest software:
See software package for more information.
"0.461.5088.00" Main Machine software:
See software package for more information.
"3.17.52ag" C3000 terminal software:
Bug fixes and improvements.
"4.1.K.12 p2" AG3000 software:
Bug fixes and improvements.
"2.13.04" Topcon System 150 software:
Bug fixes and improvements.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 24

Vehicles Affected:

Challenger: MT 700E Series
General:

Vehicle Version 1.2.
Topcon System 150 Plug-In Version 3.0.
Auto-Guide 3000 Plug-In Version 2.7.
C3000 Plug-In Version 2.4.
Software:

"3.0.0" Armrest software:
See software package for more information.
"0.461.5089.00" Main Machine software:
See software package for more information.
"3.17.52ag" C3000 terminal software:
Bug fixes and improvements.
"4.1.K.12 p2" AG3000 software:
Bug fixes and improvements.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 25

Vehicles Affected:

Challenger: 9725, 9740, 9760, 9770, (Initial Release): 9870, 9860
Massey Ferguson: 9725, 9740, 9760, 9770, (Initial Release): 9870, 9860
General:

Initial Release of Windrower Models 9870/9860.
Updated Software for AG3000/System 150.

--------------------------------------------------------------------------------

Release Notes - 4/17/2014 (Update 0142)

EDT NOTES:

EDT Version: 1.71.14065.785


--------------------------------------------------------------------------------

CONTENT UPDATES - Part 1

Vehicles Affected:

Challenger: MT600D Series
Massey Ferguson: 8600 Series
General:

Vehicle Version 6.4.
Correction of multiple bugs in configuration page.
Correction of a bug that not displaying DEF dosing quantity.
Correction of a bug in the translation of valve identifier configuration.
Add the possibility to boost the AC with Vistronic management.
Software:

New Light module software for Tier3 tractors - V1.9.0
Ensure consistency between Tier3 tractors and Tier4 tractors.
New Linkage software - V2.14.0
Improvement Intermix loop in the efforts.
New Transmission (EXT-Lite) software - V1.07
Correction of bugs that was on the EXT-Lite 1.06.
New Dashboard (DCC3) software - V2.5.0
Compatibility with EXT-Lite 1.07.

--------------------------------------------------------------------------------

Release Notes - 4/11/2014 (Update 0141)

EDT NOTES:

EDT Version: 1.71.14065.785


--------------------------------------------------------------------------------

CONTENT UPDATES - Part 1

Vehicles Affected:

Challenger: TG 8300B
TerraGator: TG 8300B, TG 8400B, TG 9300B
General:

Vehicle Version 1.16
Corrected error in previous EDT Update causing models to not appear.

--------------------------------------------------------------------------------

Release Notes - 3/26/2014 (Update 0140)

EDT NOTES:

EDT Version: 1.71.14065.785

General:

Changed Primary Vouchering Endpoint to https://secure.agco-ats.com/dealerdbwebserv/dealerdbservice.asmx.
Updated the Stored Codes DTC screen to include notice text explaining that stored codes are historical codes only.
Fixed an instability issue with creating EDT Lite installers.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 1

Vehicles Affected:

Laverda: AL4 Evolution, AL4 Techno
General:

New Model-Mapping.
Diagnostics:

Vehicle diagnostic content release V1.5.
Engine idle speed adjustment configuration (1000rpm/1100rpm).
New software version 1.5 and 1.6 (Auth.-code required)
Improved alarm behavior.
EEM4 plug-in version 4.3.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 2

Vehicles Affected:

Valtra: T-Series, N-Series, A-Series
General:

Vehicle Version 2.84.
New AC15.34, AC15.35, AC16.34, AC16.35 and AC19.34 for Less Regulated Countries (Tier2).
1xCAN version of TC2 unit in Versu and Hitech without TC2 unit.
Auto calibrations are set visible for AC15.3x models (Manual calibrations are now adjustments).
Multi Clutch tests are available on Diagnostic Test page for AC15.3x models.
Manual calibrations without saving the values.
Order of service code presentation is changed from SA, SPN, FMI to SPN, FMI, SA.
Added names for TC1/User Indexes to replace the names of unknown indexes.
Select Engine Software pop-up window added for N163 in EDT #136 update.
New type of EEM4 software with better tolerance without power compensation.
Diagnostic Surface:

Rear throttle pedal added to TwinTrac View -page.
Difflock function set visible to AC19.
Direct drive pedal page set visible to EEM4 models.
All tool tips and captions updated to diagnostic pages.
Fault Trees:

Update for all vehicles:
Added wiring diagrams to facelift models and calibration diagnostic codes to AC15.
Translations:

Initial translations for NL, DE, NO, RU, TR, PT.
Update for all languages concerning new strings.
Software:

AC15.3 (2.2.0.0).
AC15.33 (2.2.0.0).
Support to Auto calibration, Multi Clutch tests, Service indexes 455 & 456, Visibility for calibration index values (indexes 300 ? 322), Calibration diagnostics, User data storing fixed.
AC15.34 (2.1.0.0).
New software because TC2 has been replaced with 1xCAN version.
AC19 (2.1.1.0).
New parameters that supports also LRC models.
Engine software for LRC ?models (From N103.4 H up to T213V).
New software version 2.1.3 for C1000. Possible to be updated to old and new C1000 hardware.
Note: Terminal software version must be 1.7.1 or newer before updating to version 2.1.3.
New software version 3.13.55 for C3000 terminal. This terminal software includes software version 3.6K9p12 for AGI-4.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 3

Vehicles Affected:

Challenger: 21, 24, 27, 29, 31, 33, 35, 36, 40
Massey Ferguson: 21, 24, 27, 29, 31, 33, 35, 36, 40
Sunflower: 21, 24, 27, 29, 31, 33, 35, 36, 40
General:

Initial Release.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 4

Vehicles Affected:

Challenger: MT500
Massey Ferguson: 7350, 7370, 7390, 7415
Valtra: BT150, BT170, BT190, BT210
General:

Vehicle Version 3.8.
Fix a bug in transmission configuration that denied access to parameters.
New C1000 Software.
Update C3000 (V3.13.55):
Provide support for new 2014 machines.
Fix the C1000 Sprayer speed limit bug.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 5

Vehicles Affected:

Massey Ferguson: 2700, 4700
General:

Vehicle Version 1.5.
Initial Release.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 6

Vehicles Affected:

Challenger: CH654B, CH658B
Fendt: 8370, 8400, 9470X
Massey Ferguson: 7280, 7282, 9280
General:

New Model-Mapping
Diagnostics:

Vehicle diagnostic content release V1.12.
Engine EEM4 plug-in version 4.3.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 7

Vehicles Affected:

Fendt: 8380P, 8380P AL, 8410P, 8410P AL, 9490X, 9490X AL
Massey Ferguson: 7380, 7380 AL, 7382, 7382 AL, 9380, 9380 AL
General:

Vehicle Version v0.9.
Initial Relase.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 8

Vehicles Affected:

Challenger: MT 600C Series, MT 600D Series
Massey Ferguson: 8600
General:

Vehicle Version 6.2.
New Dashboard software: DCC3_V1_9_2(Tier3) and DCC3_V2_4_0 (Tier4).
New Suspended Cab software(V1.7.0).
New label code management in configuration (Add pictures and list of choice filters).
Add links in Network scan propertiers to display the software release note Files.
New C1000/CCD Software (2.1.3 / 0.2.2):
Fix for proper handling of the ignition state on old C1000 hardware.
Bootloader setting and counter increment logic modifications to avoid erroneously entering recovery mode in the event of multiple voltage drops during power up sequences.
Fixed bug: "AG3000 ISO-VT object pool causing VT pools to drop offline if it tried to connect when using a Cyrillic based language."
Update C3000 (V3.13.55):
Provide support for new 2014 machines.
Fix the C1000 Sprayer speed limit bug.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 9

Vehicles Affected:

Challenger: CH652CA
Fendt: 5275CA, 5275CPLA, 5275CPLIA, 6335CA, 6335CPLA
Laverda: M400A, M400LCA, M400LCIA, M410A, M410LCA
Massey Ferguson: 7360A, 7360PLA, 7360PLIA, 7370A, 7370PLA
General:

New Model-Mapping.
CH652CA (initial realease).
New Model: 7360PLIA, 5275CPLIA.
Diagnostics:

Vehicle diagnostic content release v1.11.
Engine EEM4 plug-in version 4.3.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 10

Vehicles Affected:

Challenger: CH644
Fendt: 5220E
Laverda: M200
Massey Ferguson: 7244
General:

New Model-Mapping.
Diagnostics:

Vehicle diagnostic content release v1.5.
Engine idle speed adjustment configuration (1000rpm/1100rpm).
Vehicle speed adjustment configuration.
Engine EEM4 plug-in version 4.3.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 11

Vehicles Affected:

Challenger: CH645C, CH647C
Fendt: 5255L, 6275L
Laverda: M300, M310
Massey Ferguson: 7345S, 7347S
General:

New Model-Mapping.
Diagnostics:

Vehicle diagnostic content release v1.7.
Engine idle speed adjustment configuration (1000rpm/1100rpm).
Engine EEM4 plug-in version 4.3.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 12

Vehicles Affected:

Challenger: CH648C, CH652C
Fendt: 5275C, 5275CPL, 6335C, 6335CPL
Laverda: M400, M400LC, M400LCI, M410, M410LC
Massey Ferguson: 7360, 7360PL, 7370, 7370PL
General:

New Model-Mapping.
Diagnostics:

Vehicle diagnostic content release V1.17.
Engine EEM4 plug-in version 4.3.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 13

Vehicles Affected:

Challenger: 660(SA), 670(SA)
Massey Ferguson: MF9690(SA), MF9790(SA)
Valtra: BC6500, BC7500
General:

Vehicle Version 3.3.
C2100 Firmware updated to 2.0.2.
Added Portuguese Language.
C1000 Firmware updated to 1.9.1.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 14

Vehicles Affected:

Challenger: MT700 C, MT800 C, MT900 C
General:

Vehicle Version 3.23
PVED_CL Plug-In Version 2.6
Topcon System 150 Plug-In Version 2.3
Auto-Guide 3000 Plug-In Version 2.6
C3000 Plug-In Version 2.3
Software:

"2.97" Armrest software. (See software package for more information)
"0.425.4515.00" Main Machine software (MT700C, MT800C). (See software package for more information)
"0.382.9703.00" Main Machine software (MT900C). (See software package for more information)
"2.1.3.140219" C1000 VT software.
Fixed hardware compatibility issues.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 15

Vehicles Affected:

Challenger: MT 700D Series
General:

Vehicle Version 1.12.
PVED_CL Plug-In Version 2.6.
Topcon System 150 Plug-In Version 2.3.
Auto-Guide 3000 Plug-In Version 2.6.
C3000 Plug-In Version 2.3.
EEM4 T4i Plug-In Version 4.3.
Added additional SCR Tests for improved DEF diagnostics.
Software:

"2.97" Armrest software. (See software package for more information)
"1.4.0" T4i AGCO Power engine software.
Improved Boost and Rail pressure monitoring.
Improved ambient temperature monitoring.
"0.451.1141.00" Main Machine software. (See software package for more information)
"2.1.3.140219" C1000 VT software.
Fixed hardware compatibility issues.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 16

Vehicles Affected:

Challenger: MT700E
General:

Vehicle Version 1.0.
Initial Release.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 17

Vehicles Affected:

Challenger: 520C, 530C, 540C, 550C, 560C
Fendt: 9390R, 9450R, 9480R
Massey Ferguson: 9520, 9530, 9540, 9550, 9560
General:

New header presets function.
Added new DTCs for TIER4 final.
Improved header response in manual mode.
Reduced accumulator effects on header pause/drop.
Easier AHHC mode sensitivity settings for different headers.
Improved thresher clutch engagement.
Rotating Spout kit option.
Reordered Task Controller screens to improve operator efficiency.
Added Time display and changed icon on Home Button.
EDT2 Connection visibility.
TIER4F release.
Software:

Axial Combine SW PACKAGE (3.0.0).
C2100 sw 2.0.2.
Plug-Ins:

AG3000 V2.6.
PVED V2.6.
EEM4 V4.3.
EEM4F V.1.0.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 18

Vehicles Affected:

Challenger: 660,670,680b
Fendt: 9690,9790,9895
General:

ADDED C2000 Controller.
SW 1.6.9 C2000.
Adjustable LTM Speed.
Plug-Ins:

EEM3 v2.1.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 19

Vehicles Affected:

Challenger: RG600
General:

Vehicle version 2.6.
Initial release of English Fault Tree Files.
Updated Plug-ins:
PVED-CL Steering Valve v2.6.
AGCO POWER Tier4 EEM4 Final v1.1.
Software:

Update software C1000 Terminal (CONS_01_07.zip). (Note: is only compatible with BIN_01_05.zip and CHS_01_06.zip)
Update software ECU Chassis (CHS_01_06.zip). (Note: is only compatible with CONS_01_07.zip and BIN_01_05.zip)
Update Norac software. (package E2UC5-UP1152.fw2)
Software Flashing:

added additional warning for user when starting EOL flashing of Chassis ECU/Sprayer ECU.
Diagnostic Trouble Code:

Bug fix: error code 01.0.01 was triggered by Tier4 Final machines after clearing the stored error codes on the "Proprietary CAN-bus-Generic Driver CAN-bus."

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 20

Vehicles Affected:

Challenger: RG 700
RoGator: RG 700
General:

Vehicle Version 1.3.
PVED_CL Plug-In Version 2.6.
Auto-Guide 3000 Plug-In Version 2.6.
EEM4 T4i Plug-In Version 4.3.
Added additional SCR Tests for improved DEF diagnostics.
Software:

"SC1 1.0.0.140210.1100" Armrest software.
Fixed footswitch bug when used with AG3000.
Master apply now turns on while in Field Mode only.
Endrow nozzles now work with joystick phasing switches.
Improved Lever Mode performance.
"1.4.0" T4i AGCO Power engine software.
Improved Boost and Rail pressure monitoring.
Improved ambient temperature monitoring.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 21

Vehicles Affected:

Challenger: 520B, 530B, 540B, 550B, 560B
Fendt: 9300R, 9350R, 9390R
Massey Ferguson: 9695, 9795, 9895, 900R, 9350R
General:

Improved compatibility of data log files for desktop software applications.
Enable GPS Bridge by default.
Improved audio alarm sound.
Audio alarm minimum level set according to regulatory requirements.
Software:

C2100 v2.0.2.
EEM3 v2.1.
SYSTEM150 V2.3.
PVED v2.6.
Plug-Ins:

PVED v2.6.
EEM3 v2.1.
SYSTEM150 v2.3.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 22

Vehicles Affected:

Valtra: S232-S353
General:

Vehicle Version 4.9.
New C1000/CCD Software (2.1.3 / 0.2.2):
Fix for proper handling of the ignition state on old C1000 hardware.
Bootloader setting and counter increment logic modifications to avoid erroneously entering recovery mode in the event of multiple voltage drops during power up sequences.
Fixed bug: "AG3000 ISO-VT object pool causing VT pools to drop offline if it tried to connect when using a Cyrillic based language."
New C3000 Software (3.13.55):
Provide support for new 2014 machines.
Fixed C1000 Sprayer speed limit bug.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 23

Vehicles Affected:

Gleaner: S67, S77, R66, R76
General:

Improved compatibility of data log files for desktop software applications.
Enable GPS Bridge by default.
Improved audio alarm sound.
Audio alarm minimum level set according to regulatory requirements.
S68,S78,S88 TIER4F models.
Ancillary bus.
EDT2 Connection visibility.
Updated connection steps.
Software:

CIC v7.25.
AG3000 3.6k.9p12.
EEM4F Engine SW Files.
CIC SW v7.25 (R & S Tier4i).
C2100 v2.0.2.
Plug-Ins:

System 150 v2.3.
System 153 v2.6.
PVED VALVE v2.6.
EEM3 v2.1.
EEM4 v4.3.
EEM4F v1.0.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 24

Vehicles Affected:

Challenger: TG 8300
TerraGator: TG 7300, TG 8300, TG 8400
General:

Vehicle version 1.15.
PVED_CL Plug-In Version 2.6.
Topcon System 150 Plug-In Version 2.3.
EEM4 T4i Plug-In Version 4.3.
Added additional SCR Tests for improved DEF diagnostics.
Software:

Fan Controller: updated parameters to improve engine low idle performance.
"1.4.0" T4i AGCO Power engine software.
Improved Boost and Rail pressure monitoring.
Improved ambient temperature monitoring.
Configuration:

Service Maintenance Hours:
Fixed an issue where the hours could not be set for service part DCC3 instrument clusters.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 25

Vehicles Affected:

Challenger: TG 8300B
TerraGator: TG 7300B, TG 8300B, TG 8400B
General:

Vehicle version 1.15
Initial release.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 26

Vehicles Affected:

Challenger: TG 835
General:

Vehicle Version 1.0.
Initial release.
Plug-ins:

AG3000 (AGI-4 Receiver) Diagnostics v2.6.
C3000 Terminal v2.2.
AGCOMMAND v2.0.
AGCO POWER Tier4 EEM4 Final v1.1.
PVED-CL Steering Valve v2.6.
SGR-1 Receiver v1.8.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 27

Vehicles Affected:

Challenger: WR9740, WR9760, WR9770
Massey Ferguson: WR9740, WR9760, WR9770
General:

Added model mapping to add the above vehicles to the Africa/Middle East region.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 28

Vehicles Affected:

Massey Ferguson: 5600
Iseki: 5600
General:

Vehicle Version 2.9.
Fixed a bug displaying TECU for some models.
Fixed a bug displaying wrong options for some models.
New C1000/CCD Software (2.1.3 / 0.2.2):
Fix for proper handling of the ignition state on old C1000 hardware.
Bootloader setting and counter increment logic modifications to avoid erroneously entering recovery mode in the event of multiple voltage drops during power up sequences.
Fixed bug: "AG3000 ISO-VT object pool causing VT pools to drop offline if it tried to connect when using a Cyrillic based language."

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 29

Vehicles Affected:

Challenger: MT 600E
Massey Ferguson: 8700
General:

Vehicle Version 1.0.
Initial Release.
New C1000/CCD Software (2.1.3 / 0.2.2):
Fix for proper handling of the ignition state on old C1000 hardware.
Bootloader setting and counter increment logic modifications to avoid erroneously entering recovery mode in the event of multiple voltage drops during power up sequences.
Fixed bug: "AG3000 ISO-VT object pool causing VT pools to drop offline if it tried to connect when using a Cyrillic based language."
Update C3000 (V3.13.55):
Provide support for new 2014 machines.
Fix the C1000 Sprayer speed limit bug.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 30

Vehicles Affected:

AGCO: DTA, RTA
Challenger: MT 500B, MT 600B Series
Massey Ferguson: 6400, 7400, 8400
General:

Vehilce Version 2.5.
Add an option for Challenger brand : TechStar CVT transmission.
New version of AG150 software.
Dyna-VT / TechStar CVT Tractors:
Add a message after the update of EXT software to inform the user that parameters have changed.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 31

Vehicles Affected:

Challenger: MT 400D, MT 500D
Massey Ferguson: 5600, 6600, 7600
Iseki: i5600, i6600, i7600
General:

Vehicle Version 6.3.
New: Possibility to configure the armrest levers (spare parts).
Fix a bug displaying a wrong picture on a gearbox view.
Fix the issue where the MDT_DC crashed after selecting Code G.
New C1000/CCD Software (2.1.3 / 0.2.2):
Fix for proper handling of the ignition state on old C1000 hardware.
Bootloader setting and counter increment logic modifications to avoid erroneously entering recovery mode in the event of multiple voltage drops during power up sequences.
Fixed bug: "AG3000 ISO-VT object pool causing VT pools to drop offline if it tried to connect when using a Cyrillic based language."
Update C3000 (V3.13.55):
Provide support for new 2014 machines.
Fix the C1000 Sprayer speed limit bug.

--------------------------------------------------------------------------------

Release Notes - 3/18/2014 (Update 0139)

EDT NOTES:

EDT Version: 1.70.13351.556


--------------------------------------------------------------------------------

CONTENT UPDATES - Part 1

Vehicles Affected:

Rogator: RG900, RG1100, RG1300, RG900B, RG1100B, RG1300B
Challenger: RG 900, RG 1100, RG 1300
General:

Vehicle Version 1.3.
PVED_CL Plug-In Version 2.6.
Topcon System 150 Plug-In Version 2.3.
Auto-Guide 3000 Plug-In Version 2.6.
EEM4 T4i Plug-In Version 4.3.
EEM4 T4F Plug-In Version 1.0.
Added additional SCR Tests for improved DEF diagnostics.
Software:

"1.4.0" T4i AGCO Power engine software:
Improved Boost and Rail pressure monitoring.
Improved temperature monitoring.
"0.5.4" T4F AGCO Power engine software:
Initial production release for T4F models (RG900B, RG1100B, & RG1300B).
"1.0.0.130822.1200" Armrest (TECU) software:
Allow Raven SmarTrax to communicate with PVED steering valve.
"2.1.3.140211.0044" C1000 software:
Fixed hardware compatibility issue.

--------------------------------------------------------------------------------

Release Notes - 2/11/2014 (Update 0138)

EDT NOTES:

EDT Version: 1.70.13351.556


--------------------------------------------------------------------------------

CONTENT UPDATES - Part 1

Vehicles Affected:

Massey Ferguson: 5600 Series
General:

Vehicle Version 2.8.
Software:

Engine software:
Initial release: Tier3i software for 5608-5609-5610.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 2

Vehicles Affected:

Challenger: MT400 D Series
Massey Ferguson: 6600 Series
Iseki: 6600 Series
General:

Vehicle Version 6.2.
Software:

Engine Software:
Fixed ill-timed display of error code E91 (Throttle pedal) and E1639 (Fan speed request).
Fixed Low idle instability.
New management of the downstream Nox sensor activation.
New ambiant temperature management.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 2

Vehicles Affected:

Challenger: MT500 D Series
Massey Ferguson: 7600 Series
General:

Vehicle Version 6.2.
Added MF7620 and MF7624 Dyna-VT Tier 2 for Africa and Middle East.
Configuration:

New parameter files for CVT transmission to fix the trailer braking progressivity.

--------------------------------------------------------------------------------

Release Notes - 1/10/2014 (Update 0137)

EDT NOTES:

EDT Version: 1.70.13351.556

Added serial number display to the main screen of EDT.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 1

Vehicles Affected:

Valtra: T-Series, N-Series
General:

Vehicle Version 2.78.
Software:

Software packages:
AC14.3 (1.9.0.0).
AC14.33 (1.6.0.0).
LH Link (1.1.3.0).

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 2

Vehicles Affected:

Challenger: MT600 C Series
Massey Ferguson: 8600 Series
General:

Vehicle Version 6.0.
Software:

Engine Software:
Fixed ill-timed display of error code E91 (Throttle pedal) and E1639 (Fan speed request).
Fixed Low idle instability.
New management of the downstream Nox sensor activation.
Low cetane parameter improvement about starting.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 3

Vehicles Affected:

Valtra: S232-S352
General:

Vehicle Version 4.8.
Software:

Engine Software:
Fixed ill-timed display of error code E91 (Throttle pedal) and E1639 (Fan speed request).
Fixed Low idle instability.
New management of the downstream Nox sensor activation.
Low cetane parameter improvement about starting.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 4

Vehicles Affected:

Massey Ferguson: 5600 Series
Iseki: i5600 Series
General:

Vehicle Version 2.7.
Diagnostic Surface:

Fixed issue with transmission diagnostic surface missing.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 5

Vehicles Affected:

Challenger: MT500 D Series
Massey Ferguson: MF 7600 Series
Iseki: 7600 Series
General:

Vehicle Version 6.1.
Software:

Engine Software:
Tier2/Tier4i:
Fixed ill-timed display of error code E91 (Throttle pedal) and E1639 (Fan speed request).
Fixed Low idle instability.
New management of the downstream Nox sensor activation.
Low cetane parameter improvement about starting.
Tier2:
More rounded curves on Dyna4 and Dyna6.
+5% power on boost curve on Dyna6.

--------------------------------------------------------------------------------

Release Notes - 12/20/2013 (Update 0136)

EDT NOTES:

EDT Version: 1.70.13309.1106

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 1

Vehicles Affected:

Valtra: T-Series, N-Series
General:

Vehicle Version 2.75.
Updated Plug-Ins:
EEM4 v4.1.
AG3000 v2.6.
C1000 v1.10.
C3000 v2.2.
EEM3 v2.1.
EEM4 v4.3.
AG150 v2.3.
PVED_CL v2.4.
Configuration:

Index names updated for TC1.
Software:

New EEM4 software for N163D and N163V.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 2

Vehicles Affected:

Challenger: MT600 C Series
Massey Ferguson: 8600 Series
General:

Vehicle Version 5.7.
Configuration:

Dashboard option parameter screen (in the label code surface) is now closed after applying choice.
Test:

New SCR Emptying Test.
New SCR Pressure Build-up Test.
New SCR Dosing Test.
Software:

The choice screen at the begining of flash software package has been removed. A version reading process determines which controller has to be updated.
CCD v2.0.1 / Datatronic v0.2.1.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 3

Vehicles Affected:

Challenger: CH652CA
Fendt: 5275A, 5275PLA, 6335A, 6335PLA
Laverda: M400A, M400LCA, M400LCIA, M410A, M400LCA
Massey Ferguson: 7360A, 7360PLA, 7370A, 7370PLA
Software:

New NT01 Software (v734).
New SD FTD1 file.
Diagnostics:

Vehicle diagnostic content release v1.10.
MF7370A Tier2 for Eastern Europe added.
EEM4 Plug-In updated to v4.3.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 4

Vehicles Affected:

Valtra: S232-S352
General:

Vehicle Version 4.7.
Fixed bad steering valve parameter issue on third connection (Engine and ISO).
Diagnostic Surface:

Seat present sensor added in reverse station screen.
Information has been added in the PTO surface on the 540 PTO switch saying the switch is not used.
Transport control switch in linkage function has been fixed.
Fixed bug in active suspended cab surface (Voltage value, Up/Downshift solenoid valve, Valve intensity).
Test:

New SCR Emptying Test.
New SCR Pressure Build-up Test.
New SCR Dosing Test.
Software:

Twin Trac bootloader has been updated from v0.5.0.5 to v0.6.0.0 (no functional impact).
CCD V2.0.1.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 5

Vehicles Affected:

Massey Ferguson: 5600 Series
Iseki: i5600 Series
General:

Vehicle Version 2.6.
Initial Iseki release.
Connections:

For all tractors having a PTO proportional valve, it is now possible to select between the following choices in the transmission controller:
Normal-inertia implement.
Low-inertia implement.
High-inertia implement.
Test:

New SCR Emptying Test.
New SCR Pressure Build-up Test.
New SCR Dosing Test.
Software:

Initial software release package for MF 5611, MF 5612, MF 5613 model:
Dashboard Dyna6: v2.2.0.
Autotronic5-Dyna4: v1.9.0.
Autotronic5-Dyna6: v3.13.0.
CCD V2.0.1 / Datatronic v0.2.1.
New engine software:
MF 5611: 837085259_1: Fixed engine specification number issue.
MF 5612: 837085257_1: Fixed engine specification number issue.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 6

Vehicles Affected:

Challenger: MT400 D Series
Massey Ferguson: 6600 Series
Iseki: 6600 Series
General:

Vehicle Version 6.0.
6600 models has been added in Iseki brand.
Test:

New SCR Emptying Test.
New SCR Pressure Build-up Test.
New SCR Dosing Test.
Software:

Compatibility 5600:
Dashboard Dyna6: v2.2.0.
Autotronic5-Dyna4: v1.9.0.
Autotronic5-Dyna6: v3.13.0.
CCD v2.0.1 / Datatronic v0.2.1.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 7

Vehicles Affected:

Challenger: MT500 D Series
Massey Ferguson: 7600 Series
Iseki: 7600 Series
General:

Vehicle Version 6.0.
Configuration:

For all tractors having a PTO proportional valve, it is now possible to select between the following choices in the transmission controller:
Normal-inertia implement.
Low-inertia implement.
High-inertia implement.
Dashboard option parameter screen (in label code surface) is now closed after applying choice.
Test:

New SCR Emptying Test.
New SCR Pressure Build-up Test.
New SCR Dosing Test.
Software:

Compatibility 5600:
Dashboard Dyna6: v2.2.0.
Autotronic5-Dyna4: v1.9.0.
Autotronic5-Dyna6: v3.13.0.
CCD v2.0.1 / Datatronic v0.2.1.

--------------------------------------------------------------------------------

Release Notes - 11/27/2013 (Update 0135)

EDT NOTES:

EDT Version: 1.70.13309.1106

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 1

Vehicles Affected:

Massey Ferguson: 5600 Series
General:

Vehicle Version 2.5.
Software:

Initial software release package for MF 5611, MF 5612, MF 5613 model:
Dashboard Dyna6: v2.2.0
Autotronic5-Dyna4: v1.8.0
Autotronic5-Dyna6: v3.12.0
Autotronic5-Hydraulic: v1.1.0

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 2

Vehicles Affected:

Challenger: MT400 D Series
Massey Ferguson: 6600 Series
Iseki: 6600 Series
General:

Vehicle Version 5.9.
6600 model has been added in ISEKI brand.
Software:

New engine software for:
6613 Dyna6 (_4) \ MT465D AutoPowerVI (_4)

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 3

Vehicles Affected:

Challenger: MT500 D Series
Massey Ferguson: 7600 Series
Iseki: 7600 Series
General:

Vehicle Version 5.9.
7620 model has been added in ISEKI brand.
Software:

New engine software for:
MF 7619 Dyna6 (_4) \ MT555D AutoPowerVI (_4)
MF 7620 Dyna6 (_4) \ MT565D AutoPowerVI (_4)
MF 7622 Dyna6 (_3) \ MT585D AutoPowerVI (_3)
MF 7624 Dyna6 (_3) \ MT595D AutoPowerVI (_3)

--------------------------------------------------------------------------------

Release Notes - 11/22/2013 (Update 0134)

EDT NOTES:

EDT Version: 1.70.13309.1106

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 1

Vehicles Affected:

Valtra: N-Series
General:

ANT-vehicle v2.74.
Software:

New EEM4 software for N93 and N103.
New tractor software packages (TC1 parameters updated):
AC18.4 (2.1.0.0).
AC19 (2.1.0.0).

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 2

Vehicles Affected:

ATS: System 150 (universal support)
General:

Updated System 150 plugin.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 3

Vehicles Affected:

ATS: HiPer AG
General:

Updated HiPerAG Plugin from version 1.6 to 1.7.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 4

Vehicles Affected:

Massey Ferguson: 4608, 4609, 4610
Diagnostics:

Diagnostic content version 1.1:
Updated EEM4 plugin Version 4.3
New Engine Software (_6.hex)

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 5

Vehicles Affected:

Challenger: CH652CA
Fendt: 5275A, 5275PLA, 6335A, 6335PLA
Laverda: M400A, M400LCA, M400LCIA, M410A, M400LCA
Massey Ferguson: 7360A, 7360PLA, 7370A, 7370PLA
Software:

New NT01 Bootloader and Bios.
New EXT-LT Bios.
New SD software.
Diagnostics:

Vehicle diagnostic content release v1.9.
Improved alarm handling.
Updated sieves functionality.
New engine idle speed parameter.
New sieve init procedure flag parameter.
New counter data save procedure.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 6

Vehicles Affected:

Challenger: MT700 C, MT800 C, MT900 C
General:

Vehicle Version 3.22.
Husco Plug-In Version 2.10.
Software:

Added Duplicate Valve Detection and Resolution Page.
Added Husco Valve Controller Troubleshooting Guide.
Fixed bug where EDT misread the 'E.Min' calibration values.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 7

Vehicles Affected:

Challenger: MT 700D Series
General:

Vehicle Version 1.11.
Husco Plug-In Version 2.10.
Software:

Added Duplicate Valve Detection and Resolution Page
Added Husco Valve Controller Troubleshooting Guide
Fixed bug where EDT misread the 'E.Min' calibration values

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 8

Vehicles Affected:

Rogator: RG 900, RG 1100, RG 1300
Challenger: RG 900, RG 1100, RG 1300
General:

Vehicle Version 1.21.
Software:

Norac Version 4.4.0.8:
Numerous bug fixes and performance improvements. See Norac Software Flash Package details for more information.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 9

Vehicles Affected:

Challenger: RG600
General:

Vehicle version 2.5.
Added Spanish language.
Added links for future Fault Tree support.
New Plug-in:
AGCO SISU POWER Tier4 Final Diagnostics v0.9.
AG3000 (AGI-4 Receiver) Diagnostics v2.5.
Updated Plug-ins:
AGCOMMAND v2.0.
C3000 Terminal v2.2.
AGCO SISU POWER Tier3 EEM3 v2.1.
AGCO SISU POWER Tier4 EEM4 v4.3.
PVED-CL Steering Valve v2.4.
SGR-1 Receiver v1.8.
Software:

Update software C1000 Terminal (CONS_01_06.zip). (Note: is only compatible with BIN_01_05.zip and CHS_01_05.zip).
Update software ECU Chassis (CHS_01_05.zip). (Note: is only compatible with CONS_01_06.zip and BIN_01_05.zip).
Update software ECU Sprayer (BIN_01_05.zip). (Note: is only compatible with CONS_01_06.zip and CHS_01_05.zip).
Update Light ECU (Challenger 0.1.16.0.bin).
Update C3000 software (X30_AGCO_V3.13.54_full_upgrade.zip).
Connection:

Added "Engine Ancillary CAN Bus(T4F)" connection for Tier4 Final engines.
Diagnostic Surface:

Added surface Spray Pump - Low Flow Control.
Added surface Trailer Brake.
Added surface Boom Folding - 3Fold Boom.
Configuration:

Added option "Low Flow Kit" (for MY 2010-2013) by "Read/Change Vehicle Configuration."
Modified "Reset Spray Pump over speed counter;" displayed speeds (RPM) have been increased.
Diagnostic Test:

Added "Read Hydrostatic Drive Calibration values."
Diagnostic Trouble Code:

By each error code is now displayed the actual destination (ECU name) of the error.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 10

Vehicles Affected:

Challenger: RG 700
RoGator: RG 700
General:

Vehicle Version 1.2.
Software:

Norac Version 4.4.0.8:
Numerous bug fixes and performance improvements. See Norac Software Flash Package details for more information.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 11

Vehicles Affected:

Challenger: TerraGator 8333
General:

Vehicle version 2.3
New Plug-ins:
AG3000 (AGI-4 Receiver) Diagnostics v2.5.
C3000 Terminal v2.2.
Updated Plug-ins:
AGCOMMAND v2.0.
AGCO SISU POWER Tier3 EEM3 v2.1.
PVED-CL Steering Valve v2.4.
Topcon System 150 Diagnostics v2.3.
SGR-1 Receiver v1.8.
Network Scan:

Added Auxiliary CAN-BUS (System).
Software:

Update Dashboard Software (dccvt12_49).
Update NMS Software (ATSConsole2_2013_09_27_Ver_1_6_11D).

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 12

Vehicles Affected:

Challenger: TG 845
General:

Vehicle version 1.3.
New Plug-ins:
AG3000 (AGI-4 Receiver) Diagnostics v2.5.
C3000 Terminal v2.2.
Updated Plug-ins:
AGCOMMAND v2.0.
AGCO SISU POWER Tier4 EEM4 v4.3.
PVED-CL Steering Valve v2.4.
SGR-1 Receiver v1.8.
Network Scan:

Added Auxiliary CAN-BUS (System).
Software:

Update Transmission Software (TCU_01.03).
Update NMS Software (ATSConsole2_2013_09_27_Ver_1_6_11D).

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 13

Vehicles Affected:

Massey Ferguson: MF7140, MF7150, MF7170, MF7180
General:

Vehicle Version 2.2.
Updated AG3000 and C3000 Plug-in.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 14

Vehicles Affected:

Challenger: 660(SA), 670(SA)
Massey Ferguson: MF9690(SA), MF9790(SA)
Valtra: BC6500, BC7500
General:

Vehicle Version 3.2.
Added C2100 Plug-in.
Added AG3000 Plug-in.
Added PVED Plug-in.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 15

Vehicles Affected:

Valtra: BH145, BH165, BH180, BH185i, BH205
General:

Vehicle Version 1.8.
Updated AG3000 and C3000 Plug-in.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 16

Vehicles Affected:

Valtra: BM100
General:

Vehicle Version 1.1.
Updated AG3000 and C3000 Plug-in.

--------------------------------------------------------------------------------

Release Notes - 10/25/2013 (Update 0132)

EDT NOTES:

EDT Version: 1.70.13275.812

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 1

Vehicles Affected:

Valtra: T-Series, N-Series
General:

Vehicle Version 2.68.
Software:

EEM4 flashing fixed.
New EEM4 software for N103.4.
Diagnostic Surface:

Engine Starting Test diagnostic page set visible for EEM4.
PTO + PTO sigma diagnostic pages updated for Versu / Direct N3 and T3 series.
Fault Trees:

Fault Trees added for N3 and T3 facelift models AC14.32, AC14.33, AC15.32, AC15.33 and AC16.33.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 2

Vehicles Affected:

Massey Ferguson: 1736, 1742, 1749, 1754, 1758, 1759 (HST and PowerShuttle)
General:

Initial release for 1700 Premium tractors with MHI engines.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 3

Vehicles Affected:

Challenger: MT600 C Series
Massey Ferguson: 8600 Series
General:

Vehicle Version 5.6.
Initial vehicle files are now available in AG150.
Configuration:

Link has been added to the CVT gearbox calibration.
Network:

Air conditioning software version has been removed.
Error Code:

Fixed clear EXT-Lite stored error code bug.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 4

Vehicles Affected:

Rogator: RG 900, RG 1100, RG 1300
Challenger: RG 900, RG 1100, RG 1300
General:

Vehicle Version 1.21.
Software:

Update keypad software to 4.0
Fixed bug where keypad becomes unresponsive after a failed software flash.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 5

Vehicles Affected:

Challenger: RG 700
RoGator: RG 700
General:

Vehicle Version 1.1.
Added speed adjustment calibration.
Software:

Armrest Version SC1 1.0.0.130913.1100.
Headlight ECU Version 2.0.
Chassis Lighting ECU Version 2.0.
VT Version 2.0.1.130926.0100.
System Keypad Version 2.0.
System ECU Version 3.0.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 6

Vehicles Affected:

Valtra: S232-S352
General:

Vehicle Version 4.6.
Initial vehicle files are now available in AG150.
Configuration:

Link has been added to the CVT gearbox calibration.
Error Code:

Fixed clear EXT-Lite stored error code bug.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 7

Vehicles Affected:

Massey Ferguson: 5600 Series
General:

Vehicle Version 2.4.
Fixed bug where authorizaion code was required for AGCO employee.
Software:

Initial software release package for MF 5611, MF 5612, MF 5613 model
Dashboard Dyna4: V2.2.0.
Autotronic5-Dyna4: V1.7.0.
Dashboard Dyna6: V2.2.1.
Autotronic5-Dyna6 : V3.11.0.
Autotronic5-Hydraulic : V0.24.0.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 8

Vehicles Affected:

Challenger: MT400 D Series
Massey Ferguson: 6600 Series
General:

Vehicle Version 5.8
Initial vehicle files available in AG150.
Software:

Linkage V2.13.0
Increase the speed to up the linkage with LS hydraulic.
Saved the status of the coupling pump at the stop engine.
Error codes are now generated when spool valve is not connected.
Improvement the signal of Intermix on MF 7600 without switch of linkage in the pilar.
Configuration:

Fixed displaying of the EXT-Lite transmission for Dyna VT.
Link has been added to the CVT gearbox calibration.
Error Code:

Fixed clear EXT-Lite stored error code bug.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 9

Vehicles Affected:

Challenger: MT500 D Series
Massey Ferguson: 7600 Series
General:

Vehicle Version 5.8.
Initial vehicle files available in AG150.
Software:

Linkage V2.13.0
Increase the speed to up the linkage with LS hydraulic.
Saved the status of the coupling pump at the stop engine.
Error codes are now generated when spool valve is not connected.
Improvement the signal of Intermix on MF 7600 without switch of linkage in the pilar.
Configuration:

Fixed a bug where code 75 in EXT-Lite label code was missing in the description list.
Link has been added to the CVT gearbox calibration.
Error Code:

Fixed clear EXT-Lite stored error code bug.

--------------------------------------------------------------------------------

Release Notes - 10/4/2013 (Update 0131)

EDT NOTES:

EDT Version: 1.70.13275.812
Fixes:

Fixed an issue with the vouchering process where a '?' symbol was being displayed instead of the actual error.
Fixed an issue where the voucher form was not submitting the postal code correctly.

--------------------------------------------------------------------------------

Release Notes - 9/27/2013 (Update 0130)

EDT NOTES:

EDT Version: 1.70.13260.572
Enhancements:

Added support for redundant Licensing Service URLs.
Fixes:

Fixed an issue where the ECU version popup window sometimes does not display correctly.
Fixed an issue where adjacent graphical surfaces with the same signals do not always run the signals correctly.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 1

Vehicles Affected:

Valtra: T-Series, N-Series
General:

Vehicle Version 2.66.
Diagnostic Surface:

Power Shift diagnostic page added for 5PS Hitech models.
Logo of Power Shift function updated.
Pictures of Drive balance potentional meter updated on Rear linkage page.
Logo of Front lift function updated.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 2

Vehicles Affected:

Massey Ferguson: 4608, 4609, 4610
Diagnostics:

Diagnostic content version 1.8
Updated EEM4 plugin Version 4.2 (fixed bug with DM3 message).

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 3

Vehicles Affected:

Challenger: MT600 C Series
Massey Ferguson: 8600 Series
General:

Vehicle Version 5.5.
Software:

Message box and dynamic link to the label code has been added after flashing:
EXT V1.6.
Auto5-Dyna6 V3.9.0.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 4

Vehicles Affected:

Valtra: S232-S352
General:

Vehicle Version 4.5.
Diagnostic Surface:

Suspended cab page has been updated:
Progress bar.
Up solenoid valve has been added.
Software:

Dashboard software:
Monochrome terminal v2.1.0.
Color terminal v2.3.2.
Message box and dynamic link to the label code has been added after flashing:
EXT V1.6.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 5

Vehicles Affected:

Massey Ferguson: 5600 Series
General:

Vehicle Version 2.3.
MF 5611, 5612, 5613 has been added.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 6

Vehicles Affected:

Challenger: MT400 D Series, MT500 D Series
Massey Ferguson: 6600 Series, 7600 Series
General:

Vehicle Version 5.7.
Software:

Message box and dynamic link to the label code has been added after flashing:
EXT V1.6.
Auto5-Dyna6 v3.9.0.

--------------------------------------------------------------------------------

Release Notes - 9/13/2013 (Update 0129)

EDT NOTES:

EDT Version: 1.70.13247.441
General:

Fixed a compatibility issue with Fendias.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 1

Vehicles Affected:

Massey Ferguson: 3600 STD
General:

Solved a bug due Netherlands translations.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 2

Vehicles Affected:

Valtra: T-Series, N-Series
General:

Vehicle Version 2.64.
Diagnostic Surface:

Power Shift function and diagnostic page added for 3PS Hitech models.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 3

Vehicles Affected:

Challenger: CH645C, CH647C
Fendt: 5255L, 6275L
Laverda: M300, M310
Massey Ferguson: 7345S, 7347S
Diagnostic Surface:

Model CH647C now available with Tier2 engine for Asia region.

--------------------------------------------------------------------------------

Release Notes - 8/30/2013 (Update 0128)

EDT NOTES:

EDT Version: 1.70.13220.548

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 1

Vehicles Affected:

Valtra: T-Series, N-Series
General:

ANT-vehicle v2.63.
Updated Plug-In:
LHLink v1.5.
Software:

New software for LHLink Steerable Hitch Controller v1.1.2.0.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 2

Vehicles Affected:

Challenger: MT600 C Series
Massey Ferguson: 8600 Series
General:

Vehicle Version 5.4.
Diagnostic Surface:

Fix the take over control suspended cab surface.
Configuration:

Fixed setting the speed limit issue.
Software:

Fixed AGI-4 downloading (AGI-4 has been moved from the engine to the ISO bus).
CCD/C1000 version on the tractor bus has been renamed to match with the one on ISO bus.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 3

Vehicles Affected:

Challenger: 520C, 530C, 540C, 550C, 560C
Fendt: 9390R, 9450R, 9480R
Massey Ferguson: 9520, 9530, 9540, 9550, 9560
General:

New header presets function.
Added new DTCs for Tier-4 final.
Improved header response in manual mode.
Reduced accumulator effects on header pause/drop.
Easier AHHC mode sensitivity settings for different headers.
Improved thresher clutch engagement.
Software:

Added SW 2.2.0.0 package(VMM2404/EMU).
Corrected Plug-In EEM4 (Engine file : 49.hex to 47.hex on 540c, 9540 NA).

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 4

Vehicles Affected:

Challenger: RG 700
RoGator: RG 700
General:

Initial Release.
Vehicle Version 1.0.
Software:

Armrest Version SC1 1.0.0.130723.1100.
Instrument Cluster Version 2.2.0.
Headlight ECU Version 1.0.
Chassis Lighting ECU Version 1.0.
VT Version 2.0.1.130816.0057.
System Keypad Version 1.0.
System ECU Version 1.0.
EEM4 Version 1.4.0.
Norac UC5 Version 4.4.0.1.
PVED Version 38.00.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 5

Vehicles Affected:

Valtra: S232-S352
General:

Vehicle Version 4.4.
Configuration:

Fixed setting the speed limit issue.
Software:

Fixed AGI-4 downloading (AGI-4 has been moved from the engine to the ISO bus).

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 6

Vehicles Affected:

Gleaner: S67, S77, R66, R76
General:

Fixed the Task Summary screen not publishing data.
Added button for Variable Pitch Fan reversing on Demand.
Added ability to turn OFF AGCO yield sensing system alarms coming from by the VT Terminal.
Added Tier4 Final Engine DTC's.
Removed s68,s78,s88.
Software:

SW Flash Package 1.0.0.3.
CIC Flash Package 7.22.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 7

Vehicles Affected:

Challenger: WR9770, WR9760, WR9740
Massey Ferguson: WR9770, WR9760, WR9740
General:

Added Tier II WR9770 to Australia region.
Fixed a broken link.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 8

Vehicles Affected:

Challenger: MT400 D Series, MT500 D Series
Massey Ferguson: 6600 Series, 7600 Series
General:

Vehicle Version 5.6.
Connections:

Fixed setting the speed limit issue.
Software:

Fixed AGI-4 downloading (AGI-4 has been moved from the engine to the ISO bus).
CCD/C1000 version on the tractor bus has been renamed to match with the one on ISO bus.

--------------------------------------------------------------------------------

Release Notes - 8/21/2013 (Update 0127)

EDT NOTES:

EDT Version: 1.70.13220.548

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 1

Vehicles Affected:

Rogator: RG 900, RG 1100, RG 1300
Challenger: RG 900, RG 1100, RG 1300
General:

Vehicle Version 1.20
Software:

Updated C1000 to 2.0.1.130727.2251
Fixed bugs related to Four Wheel Steer system
Updated Norac UC5 software to 4.4.0.1.

--------------------------------------------------------------------------------

Release Notes - 8/16/2013 (Update 0126)

EDT NOTES:

EDT Version: 1.70.13220.548
General:

Additional support for the Chinese language.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 1

Vehicles Affected:

AGCO
Round Balers: 2846, 2856
Square Balers: 2140, 2150, 2160, 2170, 2190, 2846, 2856
Challenger
Round Balers: RB46C, RB56C
Square Balers: LB23B, LB24B, LB33B, LB34B, LB34BXD, LB44B, RB46C, RB56C
Fendt
Square Balers: 870, 990, 1270, 1290, 1290XD
Massey Ferguson
Round Balers: 2846, 2856
Square Balers: 2140, 2150, 2160, 2170, 2170XD, 2190, 2846, 2856
General:

Added 2200 Series Square Balers to Massey Ferguson and Challenger lines.
Added 2900 Series Round Baler to Massey Ferguson and Challenger lines.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 2

Vehicles Affected:

Challenger: MT600 C Series
Massey Ferguson: 8600 Series
General:

Vehicle Version 5.1.
Speed limit database update.
Fix engine soft EDT reference version (1.4.0 instead of 1.4.0.a).
Configuration:

Calibration message for CVT gearbox has been added at the end of label writing when it is needed.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 3

Vehicles Affected:

Valtra: S232-S352
General:

Vehicle Version 4.3.
Speed limit database update.
Configuration:

Calibration message for CVT gearbox has been added at the end of label writing when it is needed.
Software:

Linkage V2.80.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 4

Vehicles Affected:

Massey Ferguson: 5600 Series
General:

Vehicle Version 2.1.
Diagnostic Surface:

Connector names and links to the component files has been added.
Minor bug resolved.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 5

Vehicles Affected:

Challenger: MT400 D Series, MT500 D Series
Massey Ferguson: 6600 Series, 7600 Series
General:

Vehicle Version 5.3.
Speed limit database update.
Diagnostic Surface:

Connector names and links to the component files has been added.
Minor bug has been resolved.
Configuration:

Calibration message for CVT gearbox has been added at the end of label writing when it is needed.
Software:

New engine software:
7615 Dyna6 (_4): New parameters with more rounded curves and Boost increase.
7616 DynaVT (_2): New parameters with more rounded curve.
7618 Dyna6 (_3): New parameters with more rounded curves and Boost increase.
New Dyna6 software:
V3.9.0:
New error code 17 and 18 related to the power take off stop.
Bug fixed on the GSPTO.
Hand brake management integration in the 4 wheel drive function.
ISC bug fixed related to the FNR lever position.
New engine software Dyna4 and Dyna6:
6612, 6613, 6614, 6615, 6616: power curves ajustement.

--------------------------------------------------------------------------------

Release Notes - 8/2/2013 (Update 0125)

EDT NOTES:

EDT Version: 1.70.13193.702

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 1

Vehicles Affected:

ATS: AGCOMMAND (Universal Kit Support)
General:

General Maintenance.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 2

Vehicles Affected:

Massey Ferguson: 3600 VSF, 3600 STD
Software:

New engine software.
Diagnostics:

Diagnostic content version 3.8.
EEM3 plug-in version 2.1 (solved bug with DM3 message).

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 3

Vehicles Affected:

Laverda: AL4 Evolution
Diagnostics:

Diagnostic content version 1.4.
EEM3 plug-in version 2.1 (solved a bug with DM3 message).
EEM4 plug-in version 4.2 (solved a bug with DM3 message).

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 4

Vehicles Affected:

Challenger: CH654B, CH658B
Fendt: 8370, 8400, 9470X
Massey Ferguson: 7280, 7282, 9280
Diagnostics:

Diagnostic content version 1.11.
EEM3 plug-in v2.1 (solved bug with DM3 message).
EEM4 plug-in v4.2 (solved bug with DM3 message).
PVED-CL plug-in v2.2 (solved a bug, where spool valve calibration failed sometimes on first attempt).

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 5

Vehicles Affected:

ATS: System 150 (universal support)
General:

General Maintenance.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 6

Vehicles Affected:

ATS: HiPer AG
General:

General Maintenance.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 7

Vehicles Affected:

Challenger: CH652CA
Fendt: 5275CA, 5275CPLA, 6335CA, 6335CPLA
Laverda: M400A, M400LCA, M400LCIA, M410A, M400LCA
Massey Ferguson: 7360A, 7360PLA, 7370A, 7370PLA
Diagnostics:

Diagnostic content version 1.7.
EEM4 plug-in version 4.2 (solved an issue with DM3 message).

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 8

Vehicles Affected:

Challenger: CH644
Fendt: 5220E
Laverda: AL4 Techno, M200
Massey Ferguson: 7244
Diagnostics:

Diagnostic content version 1.3.
EEM4 plug-in version 4.2 (solved an issue with DM3 message).

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 9

Vehicles Affected:

Challenger: CH645C, CH647C
Fendt: 5255L, 6275L
Laverda: M300, M310
Massey Ferguson: 7345S, 7347S
Diagnostics:

Diagnostic content version 1.5.
EEM4 plug-in version 4.2 (solved an issue with DM3 message).

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 10

Vehicles Affected:

Challenger: CH648C, CH652C
Fendt: 5275C, 5275CPL, 6335C, 6335CPL
Laverda: M400, M400LC, M400LCI, M410, M400LC
Massey Ferguson: 7360, 7360PL, 7370, 7370PL
Diagnostics:

Diagnostic content versopm 1.16.
EEM3 plug-in V2.1(solved bug with DM3 message).
EEM4 plug-in V4.2 (solved bug with DM3 message).
New Danish Language File.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 11

Vehicles Affected:

ATS: SGR-1
General:

General Maintenance.

--------------------------------------------------------------------------------

Release Notes - 7/19/2013 (Update 0124)

EDT NOTES:

EDT Version: 1.70.13193.702
General:

Fixed an issue where Graphical Surface controls lose range fills when value is set by signal.
Fixed an issue where the ECU version information popup would not display when clicked.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 1

Vehicles Affected:

Valtra: BH145, BH165, BH180, BH185i, BH205
General:

Vehicle Version 1.7.
Added Model Year 2014.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 2

Vehicles Affected:

Massey Ferguson: MF9030
Valtra: BS3020H
General:

Vehicle Version 1.7.
Changed Norac Firmware to E2UC5-UP1128.fw2.
C3000 Plug-in updated to 2.0.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 3

Vehicles Affected:

Challenger: CH652CA
Fendt: 5275CA, 5275CPLA, 6335CA, 6335CPLA
Laverda: M400A, M400LCA, M400LCIA, M410A, M400LCA
Massey Ferguson: 7360A, 7360PLA, 7370A, 7370PLA
Diagnostic:

Networkscan: Improved behavior (sequential reading).

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 4

Vehicles Affected:

Massey Ferguson: MF7140, MF7150, MF7170, MF7180
General:

Vehicle Version 2.1.
Fixed an issue related to connection steps.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 5

Vehicles Affected:

Valtra: S232-S352
General:

Vehicle Version 4.2.
Fixed internal error message during the engine flash process.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 6

Vehicles Affected:

Massey Ferguson: 5600 Series
General:

Vehicle Version 2.0.
Internal update for manufacturing process.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 7

Vehicles Affected:

Challenger: MT500 D Series, MT500 D Series
Massey Ferguson: 6600 Series, 7600 Series
General:

Vehicle Version 5.4.
Internal update for manufacturing process.

--------------------------------------------------------------------------------

Release Notes - 7/8/2013 (Update 0123)

EDT NOTES:

EDT Version: 1.69.13177.724
General:

Fixed an issue where the ECU popup was not showing up when clicking on the ECU in Network Scan.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 1

Vehicles Affected:

Valtra: T-Series, N-Series
General:

Vehicle Version 2.59.
New plug-in for C3000 terminal, v2.0.
Updated plug-ins:
EEM4 v4.1.
AG3000 v2.3.
AGCOMMAND v2.0.
C1000 v1.7.
EEM3 v2.0.
AG150 v2.0.
PVED_CL v2.1.
Steering valve max flow (5027) changed to 100%.
Configurations:

Index names updated for TC1 and TT.
Diagnostic Surface:

Changed the mudguard picture on Rear Linkage pages for Versu/Direct /Hitech models.
Front Linkage function and diagnostic page added.
Fault Trees:

Fault trees added for AC16.0.
Software:

New tractor software packages (TT, UC1 and TC2 updated):
AC14.3 (1.8.0.0).
AC14.33 (1.5.0.0).
AC15.3 (2.1.0.0).
AC15.33 (2.1.0.0).
New software package TwinTrac (Yellow) (1.3.0.0).

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 2

Vehicles Affected:

Challenger: MT600 C Series
Massey Ferguson: 8600 Series
General:

Vehicle Version 5.2.
Diagnostic Surface:

Fixed minor issue in in steering and linkage surface.
Connector number and link to component file has been added in all surfaces.
Software:

Fixed an EEM4 flash downloading issue only from 1.1.9 to 1.4.0, on first EEM4 generation.
New Light module v1.9.0.
Test:

Flash a specific file is now possible without any authorization code.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 3

Vehicles Affected:

Challenger: CH648C, CH652C
Fendt: 5275C, 5275CPL, 6335C, 6335CPL
Laverda: M400, M400LC, M400LCI, M410, M400LC
Massey Ferguson: 7360, 7360PL, 7370, 7370PL
Diagnostics:

Vehicle diagnostic content release v1.14:
Fixed Joystick alarm window.
Straw chopper baffle Calibration - Auto learning function is saving newest value.
Straw chopper baffle Calibration - Don't allow to proceed if baffle is moving.
Added condition to engage Discharge Device or to open/close unloading auger.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 4

Vehicles Affected:

Rogator: RG 900, RG 1100, RG 1300
Challenger: RG 900, RG 1100, RG 1300
General:

Vehicle Version 1.19.
Software:

Updated C1000 to 2.0.1.130613.0344:
Fixed issue with Raven Smartrax disengaging 4WS.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 5

Vehicles Affected:

Valtra: S232-S352
General:

Vehicle Version 4.1.
Software:

Fixed an EEM4 flash downloading issue only from 1.1.9 to 1.4.0, on first EEM4 generation.
New Light module v1.9.0.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 6

Vehicles Affected:

Massey Ferguson: 5600 Series
General:

Vehicle Version 1.9.
Software:

New Engine software for Japan.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 7

Vehicles Affected:

Challenger: MT400 D Series, MT500 D Series
Massey Ferguson: 6600 Series, 7600 Series
General:

Vehicle Version 5.3.
Software:

Fixed an EEM4 flash downloading issue only from 1.1.9 to 1.4.0, on first EEM4 generation.
New Engine software:
7616 - D6.
New engine software (_2) is avalable for the CVT gearbox:
6614, 6615, 6616.
MT475D, MT485D, MT495D.

--------------------------------------------------------------------------------

Release Notes - 6/21/2013 (Update 0122)

EDT NOTES:

EDT Version: 1.69.13162.870

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 1

Vehicles Affected:

Valtra: T-Series, N-Series
General:

Vehicle Version 2.58.
Missing rear LCD added for AC18.4
Name of the connections changed
Diagnostic connections1 = Tractor / Hydraulic Diagnostics.
Diagnostic connections2 = ISOBUS / Auto-Steering Diagnostics.
Diagnostic Surface:

PowerShuttle DFD page removed from Hitech models.
Autotraction terms changed to Traction Control.
Order of 4wd switch function changed to Off, Auto, On.
PTO speed for Hitech models changed so that 1=540 rpm and 2=1000 rpm.
AI09 signal added for Rear linkage pages.
Calibration:

Clutch pedal is changed to be before PowerShuttle.
Configuration:

Aux valve 10 added to Valve head management tool.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 2

Vehicles Affected:

Massey Ferguson: 4608, 4609, 4610
Diagnostic:

Diagnostic content version 1.5
Revised instruction for clutch pedal calibration.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 3

Vehicles Affected:

Challenger: CH652CA
Fendt: 5275A, 5275PLA, 6335A, 6335PLA
Laverda: M400A, M400LCA, M400LCIA, M410A, M400LCA
Massey Ferguson: 7360A, 7360PLA, 7370A, 7370PLA
Diagnostic:

Vehicle diagnostic content release v1.5
Include MFA Eeprom flash and parameter restore.
Show occurrences for Diagnostic Trouble Codes.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 4

Vehicles Affected:

Challenger: 520C, 530C, 540C, 550C, 560C
Fendt: 9390R, 9450R, 9480R
Massey Ferguson: 9520, 9530, 9540, 9550, 9560
General:

Removed SW 1.7.4(2).ZIP for the C2100 due to broken link.
Software:

Added SW 1.7.4 (C2100).

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 5

Vehicles Affected:

AGCO: 8100, 8200, 8300, 8500, 8700, 8800 Planters
Challenger: 8100, 8200, 8300, 8500, 8700, 8800 Planters
Massey Ferguson: 8100, 8200, 8300, 8500, 8700, 8800 Planters
White: 8100, 8200, 8300, 8500, 8700, 8800 Planters
General:

Removed SW 5.10.
SGR-1 FIX -- added missing file.
Software:

ADDED SGR SW-1_3_6.ZIP

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 6

Vehicles Affected:

Valtra: S232-S352
General:

Vehicle Version 4.0.
Software:

Active suspended cab v1.4.0

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 7

Vehicles Affected:

Gleaner: S67, S77, R66, R76
General:

Added FP2.11 software.
Software:

Removed SW 1.7.4(2).ZIP.
Added C2100 SW 1.7.4.ZIP.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 8

Vehicles Affected:

Challenger: TG 8300
TerraGator: TG 7300, TG 8300, TG 8400
General:

Vehicle version 1.12.
Software:

Transmission Control Unit
Updated parameter sets for 255 kW output power for TG 7300, TG 8300, TG 8400.
Software download is now in its own software package labeled "Transmission Control Unit (Auto4)".

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 9

Vehicles Affected:

Challenger: WR9770, WR9760, WR9740, WR9735, WR9725
Massey Ferguson: WR9770, WR9760, WR9740, WR9735, WR9725
Configuration:

Modified stored parameters table to match current main controller software.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 10

Vehicles Affected:

Massey Ferguson: 5600 Series
General:

Vehicle Version 1.8.
Test:

Fix a bug in flash specific file where Auto5 software was never selected.
Display factory setting only on manifacturing tablet.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 11

Vehicles Affected:

Challenger: MT400 D Series, MT500 D Series
Massey Ferguson: 6600 Series, 7600 Series
General:

Vehicle Version 5.2.
Configuration:

Fix the EXT label code A displaying choice.
List of parameter are now available in Chinese.
Diagnostic:

Fix minor bug in linkage, differential, power take-off and gearbox surface.
Test:

Fix a bug in flash specific file where Auto5 software was never selected.
Display factory setting only on tablet concerned.

--------------------------------------------------------------------------------

Release Notes - 6/7/2013 (Update 0121)

EDT NOTES:

EDT Version: 1.69.13122.621

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 1

Vehicles Affected:

Laverda: AL4 Evolution
Diagnostics:

Vehicle diagnostic content release v1.3.
Engine EEM4 plug-in version 4.1.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 2

Vehicles Affected:

Challenger: MT540, MT560, MT570, MT580
Massey Ferguson: 7350, 7370, 7390, 7415
Valtra: BT150, BT170, BT190, BT210
General:

Vehicle Version 3.7.
General:

Added AG3000-C3000 Plugin.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 3

Vehicles Affected:

Challenger: CH654B, CH658B
Fendt: 8370, 8400, 9470X
Massey Ferguson: 7280, 7282, 9280
Diagnostics:

Vehicle diagnostic content release v1.11.
Engine EEM4 plug-in version 4.1.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 4

Vehicles Affected:

FELLA: SM8312, SM9314
Software:

Bios version 1.0.1 (updated object pool).
Diagnostics:

Diagnostic content version 1.4.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 5

Vehicles Affected:

ATS: System 150 (universal support)
General:

Fixed regression issue.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 6

Vehicles Affected:

Massey Ferguson: 4608, 4609, 4610
Diagnostics:

Diagnostic content version 1.3.
EEM4 plug-in version 4.1 (Rail Over Pressure Reset added).

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 7

Vehicles Affected:

Challenger: MT600 C Series
Massey Ferguson: 8600 Series
General:

Vehicle Version 5.1.
Fixed the AG3000 displaying in ISO connection.
Software:

New Datatronic V0.2.0 / C1000 - CCD V1.9.1.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 8

Vehicles Affected:

Challenger: CH652CA
Fendt: 5275CA, 5275CPLA, 6335CA, 6335CPLA
Laverda: M400A, M400LCA, M400LCIA, M410A, M400LCA
Massey Ferguson: 7360A, 7360PLA, 7370A, 7370PLA
Daignostics:

Vehicle diagnostic content release v1.4.
Engine EEM4 plug-in version 4.0.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 9

Vehicles Affected:

Challenger: CH644
Fendt: 5220E
Laverda: AL4 Techno, M200
Massey Ferguson: 7244
Diagnostics:

Vehicle diagnostic content release v1.2.
Engine EEM4 plug-in version 4.1.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 10

Vehicles Affected:

Challenger: CH645C, CH647C
Fendt: 5255L, 6275L
Laverda: M300, M310
Massey Ferguson: 7345S, 7347S
Diagnostics:

Vehicle diagnostic content release v1.4.
Engine EEM4 plug-in version 4.1.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 11

Vehicles Affected:

Challenger: CH648C, CH652C
Fendt: 5275C, 5275CPL, 6335C, 6335CPL
Laverda: M400, M400LC, M400LCI, M410, M400LC
Massey Ferguson: 7360, 7360PL, 7370, 7370PL
Diagnostics:

Vehicle diagnostic content release V1.13
Restore Harvesting Parameters after flash TECU.
Engine EEM4 plug-in version 4.1.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 12

Vehicles Affected:

Challenger: 520C, 530C, 540C, 550C, 560C
Fendt: 9390, 9450, 9480
Massey Ferguson: 9520, 9530, 9540, 9550, 9560
Software:

Fixed and updated the engine software files for all axial brands and regions.
C2100 Version 1.7.4.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 13

Vehicles Affected:

AGCO: 8100, 8200, 8300, 8500, 8700, 8800 Planters
Challenger: 8100, 8200, 8300, 8500, 8700, 8800 Planters
Massey Ferguson: 8100, 8200, 8300, 8500, 8700, 8800 Planters
White: 8100, 8200, 8300, 8500, 8700, 8800 Planters
General:

Added SGR1 Plug-in.
Software:

C1000 Version 1.7.2.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 14

Vehicles Affected:

Rogator: RG 900, RG 1100, RG 1300
Challenger: RG 900, RG 1100, RG 1300
General:

Vehicle Version 1.18.
Network Scan:

Corrected an issue where EDT indicated that engine software was outdated, even when it had the current version (1.3.10) installed.
Software:

Updated system module software to 9.0.
Updated armrest software to 1.0.0.130425.0900.
Updated C1000 to 2.0.1.130522.0344.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 15

Vehicles Affected:

ATS: SGR-1
General:

Fixed regression issue.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 16

Vehicles Affected:

Gleaner: S67, S77
Software:

C2100 Version 1.7.4.
EIP Version 2.9.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 17

Vehicles Affected:

Massey Ferguson: 5600 Series
General:

Vehicle Version 1.7.
Test:

Flash a specific file is now possible without any authorization code.
Software:

Low idle modification: 720rpm --> 750rpm

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 18

Vehicles Affected:

Challenger: MT500 D Series
Massey Ferguson: 7600 Series
General:

Vehilce Version 5.1.
Test:

Flash a specific file is now possible without any authorization code.

--------------------------------------------------------------------------------

Release Notes - 5/24/2013 (Update 0120)

EDT NOTES:

EDT Version: 1.69.13122.621

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 1

Vehicles Affected:

Valtra: T-Series, N-Series, A-Series
General:

ANT-vehicle v2.57.
Diagnostic Surface:

Power Shuttle page Control Unit View TC1 set visible for AC18.
EEM4 cruise page set visible for all Small N vehicles.
EEM3 Engine Starting Test page updated.
Software:

New TwinTrac software package (1.2.1.0) with fixed Rear LCD parameter file for AC19.
Fault Trees:

Fault trees added for AC16.33, AC17.2 and AC18.0.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 2

Vehicles Affected:

Challenger: CH654B, CH658B
Fendt: 8370, 8400, 9470X
Massey Ferguson: 7280, 7282, 9280
Diagnostics:

Vehicle diagnostic content release v1.10.
Fieldstar-SW v5.23
Maxi spreader function for all models.
AL machine calibration change.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 3

Vehicles Affected:

Challenger: 648C, 652C
Fendt: 5275C, 5275CPL, 6335C, 6335CPL
Laverda: M400, M400LC, M400LCI, M410, M400LC
Massey Ferguson: 7360, 7360PL, 7370, 7370PL
Diagnostics:

Vehicle diagnostic content release v1.12
New TECU language files added.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 4

Vehicles Affected:

Challenger: MT800C Series, MT900C Series
General:

Vehicle Version 3.20.
Fixed bug where AG3000 controller wasn't visible on MT 800C and MT 900C.

--------------------------------------------------------------------------------

Release Notes - 5/10/2013 (Update 0119)

EDT NOTES:

EDT Version: 1.69.13122.621

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 1

Vehicles Affected:

ATS: AGCOMMAND (Universal Kit Support)
Diagnostics:

Diagnostic content v1.3.
AGCOMMAND plug-in v2.0.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 2

Vehicles Affected:

Massey Ferguson: 3600 Series
Diagnostics:

Diagnostic content v3.7.
EEM3 plug-in v2.0.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 3

Vehicles Affected:

Laverda: AL4 Evolution
Diagnostics:

Vehicle diagnostic content release v1.2.
Engine EEM3 plug-in v2.0.
Engine EEM4 plug-in v4.0.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 4

Vehicles Affected:

Valtra: T-Series, N-Series
General:

ANT-vehicle v2.56.
New plug-in
LHLink Steerable Front Hitch, v1.4
Help added for EEM3 Select Engine Type - popup window.
Diagnostic Surface:

Powershuttle Control Unit View added to AC19.3 and AC19.5.
Configurations:

CAN-ID change accepts now new id values 1?254, was 0?254.
Software:

New EEM4 software for N93, N103, N143V and N163V.
New tractor software packages for all power shift models
AC15.3 (2.0.0.0)
AC15.33 (2.0.0.0)
AC16.0 (2.0.0.0)
AC16.2 (2.0.0.0)
AC16.3 (2.0.0.0)
AC18.0 (2.0.0.0)
AC18.4 (2.0.0.0)
AC19 (2.0.0.0)

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 5

Vehicles Affected:

Valtra: BH145, BH165, BH180, BH185i, BH205
General:

Vehicle Version 1.6.
Added AG3000 and C3000 Plug-in.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 6

Vehicles Affected:

Valtra: BM100
General:

Vehicle Version 1.0.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 7

Vehicles Affected:

Massey Ferguson: MF9030
Valtra: BS3020H
General:

Vehicle Version 1.6.
Added AG3000 and C3000 Plug-in.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 8

Vehicles Affected:

Challenger: CH654B, CH658B
Fendt: 8370, 8400, 9470X
Massey Ferguson: 7280, 7282, 9280
Diagnostics:

Vehicle diagnostic content release v1.9.
Engine EEM3 plug-in v2.0.
Engine EEM4 plug-in v4.0.
Agcommand plug-in v2.0.
PVED-CL plugin v2.0.
Topcon System 150 plug-in v2.0.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 9

Vehicles Affected:

FELLA: SM8312, SM9314
Software:

Bios version 0.0.6 (updated object pool).
Diagnostics:

Diagnostic content v1.3.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 10

Vehicles Affected:

ATS: System 150 (universal support)
General:

Removed potential conflicts on network scan.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 11

Vehicles Affected:

Massey Ferguson: 4608, 4609, 4610
Diagnostics:

Diagnostic content version 1.2.
EEM4 plug-in v4.0.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 12

Vehicles Affected:

Challenger: MT600 C Series
Massey Ferguson: 8600 Series
General:

Vehicle Version 5.0.
AG3000 plugin has been added.
C3000 plugin has been added.
PVED-CL Steering valve update.
ISO plugin has been added.
Software:

New CCD v2.0.
New Sisu Engine swoftware v1.4.0 (including engine tests).

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 13

Vehicles Affected:

Challenger: CH652CA (initial release)
Fendt: 5275A, 5275PLA, 6335A, 6335PLA
Laverda: M400A, M400LCA, M400LCIA, M410A, M400LCA
Massey Ferguson: 7360A, 7360PLA, 7370A, 7370PLA
Diagnostics:

Vehicle diagnostic content release v1.3.
Engine EEM4 plug-in v4.0.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 14

Vehicles Affected:

Challenger: 644
Fendt: 5220E
Laverda: M200
Massey Ferguson: 7244
General:

Vehicle diagnostic content release v1.1.
Engine EEM4 plug-in v4.0.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 15

Vehicles Affected:

Challenger: 645C, 647C
Fendt: 5255L, 6275L
Laverda: M300, M310, AL4 Techno
Massey Ferguson: 7345S, 7347S
General:

Vehicle diagnostic content release v1.3.
Engine EEM4 plug-in v4.0.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 16

Vehicles Affected:

Challenger: 648C, 652C
Fendt: 5275C, 5275CPL, 6335C, 6335CPL
Laverda: M400, M400LC, M400LCI, M410, M400LC
Massey Ferguson: 7360, 7360PL, 7370, 7370PL
General:

Vehicle diagnostic content release v1.11.
Tests added:
Force EDC motor.
Force spool valves.
Force outputs.
Engine EEM3 plug-in v2.0.
Engine EEM4 plug-in v4.0.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 17

Vehicles Affected:

Massey Ferguson: MF7140, MF7150, MF7170, MF7180
General:

Vehicle Version 2.0.
Added AG3000 and C3000 Plug-in.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 18

Vehicles Affected:

Challenger: 660, 670 - (South America)
Massey Ferguson: MF9690, MF9790 - (South America)
Valtra: BC6500, BC7500 - (South America)
General:

Vehicle Version 3.1.
Added EEM4 Plug-in.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 19

Vehicles Affected:

Challenger: MT700 C, MT800 C, MT900 C
General:

Vehicle Version 3.19.
Integration of AG3000 functionality.
Updated Topcon System 150 plug-in to Version 1.18.
Software:

Instrument Cluster Software updated to v2.8.0.
AGI-3 Software updated to v2.10.15.
Virtual Terminal Software updated to v1.9.1.121029.2327.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 20

Vehicles Affected:

Challenger: MT 700D Series
General:

Vehicle Version 1.9.
AGI-4 software flashed moved to Channel 2.
Software:

Virtual Terminal software updated to v1.9.1.121029.2327.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 21

Vehicles Affected:

Challenger: 520C, 530C, 540C, 550C, 560C
Fendt: 9390R, 9450R, 9480R
Massey Ferguson: 9520, 9530, 9540, 9550, 9560
General:

Added model 9520 to NA region.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 22

Vehicles Affected:

ATS: SGR-1
General:

Fixed issue where NMEA String configuration was returning incorrect data.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 23

Vehicles Affected:

Valtra: S232-S352
General:

Vehicle Version 4.0.
AG3000 plugin has been added.
C3000 plugin has been added.
ISO plugin has been added.
PVED-CL Steering valve update.
Configuration:

New EXT file parameter file (fix the cruise control disengagement issue).
Software:

EXT Lite V1.6.
CACHT 5.5.2.0.
DCC2.3.0.
New CCD v2.0.
New Sisu Engine software v1.4.0 (Including engine tests).

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 24

Vehicles Affected:

Gleaner: S67, S77, R66, R76
General:

Added AGI-4 for the S77.
Added SW 1.0.0.2 FP2.11 (lateral tilt configuration).

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 25

Vehicles Affected:

Challenger: WR9770, WR9760, WR9740, WR9735, WR9725
Massey Ferguson: WR9770, WR9760, WR9740, WR9735, WR9725
General:

Added AGI-4 to WR9770.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 26

Vehicles Affected:

Challenger: MT400 D Series (initial release), MT500 D Series
Massey Ferguson: 6600 Series (initial release), 7600 Series
General:

Vehicle Version 5.0.
AG3000 plugin has been added.
C3000 plugin has been added.
PVED-CL Steering valve update.
ISO plugin has been added.
Configuration:

Fix the VIN reading error in DCC hour setting.
Software:

New CCD v2.0.
Previous package has been added.

--------------------------------------------------------------------------------

Release Notes - 4/26/2013 (Update 0118)

EDT NOTES:

EDT Version: 1.69.13092.958

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 1

Vehicles Affected:

Challenger: MT300 B Series
Massey Ferguson: MF3600 Series
Software:

New EEM3 engine software for all models.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 2

Vehicles Affected:

Valtra: T-Series, N-Series
General:

ANT-vehicle v2.55.
Updated plug-ins
EEM4 Plug-In v3.7.
PVED_CL Plug-In v1.16.
Topcon System 150 (ag150) -> 1.18.
Single file downloading inside of software package fixed.
Configuration:

Name of the tool Reset TC1 indexes with default values changed to Update TC1 indexes with latest factory values.
Software:

Fault Trees added for AC14.31, AC15.31, AC16.31, AC16.3 and AC19.3.
Fault Trees updated for AC14.2, AC14.3, AC15.3, AC16.2, AC18.4 and AC19.4.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 3

Vehicles Affected:

Valtra: BM100
General:

Initial release.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 4

Vehicles Affected:

Fendt: 5275A, 5275PLA, 6335A, 6335PLA
Laverda: M400A, M400LCA, M400LCIA, M410A, M400LCA
Massey Ferguson: 7360A, 7360PLA, 7370A, 7370PLA
Software:

New SD SW package V5.06.
New EXT-LT bios V0.14.
NT01 V563.
Diagnostics:

Vehicle diagnostic content release V1.2.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 5

Vehicles Affected:

Challenger: 645C, 647C
Fendt: 5255L, 6275L
Laverda: M300, M310, AL4 Techno
Massey Ferguson: 7345S, 7347S
Diagnostics:

Vehicle diagnostic version 1.2.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 6

Vehicles Affected:

Challenger: 648C, 652C
Fendt: 5275C, 5275CPL, 6335C, 6335CPL
Laverda: M400, M400LC, M400LCI, M410, M400LC
Massey Ferguson: 7360, 7360PL, 7370, 7370PL
General:

Changes:
Info, warning, alarms changed as specs.
Drum speed, Fan speed, Concaves opening is not increased by switches if sensor is present, TECU will increase setpoint on C2000.
Hide objects on C2000 if function is not selected in System Setup page - Remove "Min engine high idle speed" object - Dealer password permissions - Update pre-settings value - Shortcut creations in status bar - Add park brake icon in status bar - Level icon in position 6 change dinamically based on inclination value - Swap drum and MCS icons on Sensor page.
Added Universal concave + Filler plates items.
Fixed fuel level parameters to fit new tank with UREA tank
fuel parameters are available for both engines.
DEF warnings on C2000 removed (icon is only visible).
Added park brake icon.
Fixed disengage Procedure in 3-hours safety OPS function.
Fixed sieve control:
only one sieve is moving simultaneously, to avoid unwanted movements caused by voltage load reduction.
Added auto learning function in sieve calibration procedure.
Enlarged windows in alarms for MCS and straw chopper speed from +/-5% to +/-10%.
Modified straw chopper unintentional disengage alarm.
Sieves are now in percentage.
Removed vertical knife alarms.
SWITCHED TILT SENSITIVITY: it's now working in the same way as AHHC (smaller, more movements) but in the code it's reversed.
Skids alarms raised only if AHHC is activated.
Added auto learning function to straw chopper electrical deflector calibration.
modified Concave control alarm timing.
Enlarged window in skids sensor check.
Software:

New ENEDC-, FTD1-, FTD2-, LEVEL- Software package version 0004_0011.
New TECU Software version 121.
Diagnostics:

Vehicle diagnostic content version 1.10.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 7

Vehicles Affected:

Massey Ferguson: MF7100
General:

Initial release.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 8

Vehicles Affected:

Challenger: MT 700D Series
General:

Vehicle Version 1.8
EEM4 Plugin updated to Version 3.9
System 150 Plugin updated to Version 1.18
Added C3000 Plugin Version 1.4
Added AG3000 Plugin Version 2.1
Software:

Added EEM4 Software for vehicles without DEF Aftertreatment System
Instrument Cluster Software Updated to Version 1.8.0.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 9

Vehicles Affected:

Challenger: 520C, 530C, 540C, 550C, 560C
Fendt: 9390R, 9450R, 9480R
Massey Ferguson: 9520, 9530, 9540, 9550, 9560
General:

Added AGI4.
Fixed VIN start configuration.
System 150.
Connection steps and images.
Fixed requested master model issues.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 10

Vehicles Affected:

Gleaner: S67, S77, T6, T7
General:

Added AGI4.
System 150.
Connection steps and images.
Fixed requested master model issues.
LTM FP2.11 SW.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 11

Vehicles Affected:

Challenger: WR9770, WR9760, WR9740, WR9735, WR9725
Massey Ferguson: WR9770, WR9760, WR9740, WR9735, WR9725
General:

Added AGI4.
Added Telemetry.

--------------------------------------------------------------------------------

Release Notes - 4/12/2013 (Update 0117)

EDT NOTES:

EDT Version: 1.69.13092.958
General:

Fixed a compatibility issue with EDT and the latest 2013 Fendias release related to COM Isolation for SiE_DC.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 1

Vehicles Affected:

Valtra: T-Series, N-Series
General:

ANT-vehicle version 2.54
Updated plug-ins:
EEM4 Plug-In v3.7.
PVED_CL Plug-In v1.13.
New plug-ins:
C1000 Plug-In v1.6.
Auto-Guide 3000 Plug-In v2.1.
Diagnostic Surface:

Cruise visibility defined for EEM4.
Pictures of Drive balance potentiometer updated for Hitech models.
Diagnostic Tests:

Visco Fan Test.
Fault Trees:

Fault Trees added for AC14.3 and AC15.3.
Translations:

Initial version implemented for German, Italian, Polish, Spanish, Swedish.
Updated version for French and Finnish.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 2

Vehicles Affected:

AGCO
Round Balers: 2846, 2856
Square Balers: 2140, 2150, 2160, 2170, 2190, 2846, 2856
Challenger
Round Balers: RB46C, RB56C
Square Balers: LB23B, LB24B, LB33B, LB34B, LB34BXD, LB44B, RB46C, RB56C
Fendt
Square Balers: 870, 990, 1270, 1290, 1290XD
Massey Ferguson
Round Balers: 2846, 2856
Square Balers: 2140, 2150, 2160, 2170, 2170XD, 2190, 2846, 2856
General:

Removed "Hydraulic Response Fault" alarms.
Removed alarms "450 - Ejector Detected" and "452 - Ejector Not Detected".
Added Chain Oiler option in Setup screen.
Added alarms "356 - Chain Lube Not Detected" and "357 - Chain Lube Detected".
Added button on Baler Settings screen to allow for manual Chain Lube operation.
Added Electronic Knotter Trip option to Setup screen.
Updated SBM software for better bale length accuracy.
Added a 2nd main work screen that can be independently configured.
Added support for new hydraulic valve. If new valve is not installed on machine use passcode 68 to disable.
Added alarms "456 - Release Valve Not Detected" and "457 - Release Valve Short Circuit".

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 3

Vehicles Affected:

Challenger: CH654B, CH658B
Fendt: 8370, 8400, 9470X
Massey Ferguson: 7280, 7282, 9280
Software:

New engine file for 9.8L engine.
New Fieldstar software version 5.21.
New Language file version 1.56.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 4

Vehicles Affected:

Rogator: RG 900, RG 1100, RG 1300
Challenger: RG 900, RG 1100, RG 1300
General:

Vehicle Version 1.17.
Diagnostics:

Removed engine SCR related diagnostics for machines that do not have SCR systems installed.
Software:

Updated system module software to 8.0.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 5

Vehicles Affected:

Valtra: S232-S352
Parameter:

Fix the label code EXT-lite issue. (Tractor didn't move after a label code writing).

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 6

Vehicles Affected:

Challenger: TG 8300
TerraGator: 7300, 8300, 8400
General:

Vehicle version 1.11.
Software:

Fan Controller: Updated control parameters to improve controllability in fixed and variable operation modes.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 7

Vehicles Affected:

Massey Ferguson: 5600 Series
General:

Vehicle Version 1.6.
Software:

New Keyboard V2.2.0.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 8

Vehicles Affected:

Challenger: MT500 D Series
Massey Ferguson: 7600 Series
General:

Vehicle Version 4.9.
Software:

Revert Dyna6 transmission software to V3.8.0.
New Keyboard V2.2.0.
New Engine software package V1.4.0 (Engine Test compatibility).

--------------------------------------------------------------------------------

Release Notes - 3/29/2013 (Update 0116)

EDT NOTES:

EDT Version: 1.68.13066.752

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 1

Vehicles Affected:

Challenger: CH654B, CH658B
Fendt: 8370, 8400, 9470X
Massey Ferguson: 7280, 7282, 9280
Software:

New engine software version 1.4.0.
Diagnostics:

Vehicle content version 1.7.
EEM4 diagnostic version 3.9.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 2

Vehicles Affected:

Challenger: 645C, 647C
Fendt: 5255L, 6275L
Laverda: M300, M310, AL4 Techno
Massey Ferguson: 7345S, 7347S
Diagnostics:

Vehicle diagnostic version 1.1.
Added speed adjustment configuration.
EEM4 diagnostic version 3.9.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 3

Vehicles Affected:

Challenger: 660, 670
Gleaner: R65, R75, A75, A65, A75, T6, T7
Massey Ferguson: 9690, 9790
General:

Initial Release.
Software:

Engine Software v2.5.0.0.
Fuse Panel Software v2.4.
Electronic Instrument Panel v2.9.
C2000 Monitor v1.69.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 4

Vehicles Affected:

Massey Ferguson: 5600 Series
General:

Vehicle Version 1.5.
Software:

New engine software (_4).

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 5

Vehicles Affected:

ATS: System 150 (universal support)
General:

Updated to include Software Version of System 150 to 2.10.15.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 6

Vehicles Affected:

ATS: SGR-1
General:

New Configuration of SGR-1 NMEA Strings, frequency, and Correction source
New surface with ECU Information and OmniSTAR Data

--------------------------------------------------------------------------------

Release Notes - 3/15/2013 (Update 0115)

EDT NOTES:

EDT Version: 1.68.13066.752
General:

Added Sunflower brand support.
Fixed an issue where EDT Lite would not display vehicles for selection.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 1

Vehicles Affected:

Valtra: N-Series
General:

Vehicle Version 2.52.
Software:

New Software package AC19 (1.5.0.0).

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 2

Vehicles Affected:

AGCO
Round Balers: 2846, 2856
Square Balers: 2140, 2150, 2160, 2170, 2190, 2846, 2856
Challenger
Round Balers: RB46C, RB56C
Square Balers: LB23B, LB24B, LB33B, LB34B, LB34BXD, LB44B, RB46C, RB56C
Fendt
Square Balers: 870, 990, 1270, 1290, 1290XD
Massey Ferguson
Round Balers: 2846, 2856
Square Balers: 2140, 2150, 2160, 2170, 2170XD, 2190, 2846, 2856
General:

Updated round baler software to version 2.80.
Updated to C1000 plugin V1.6.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 3

Vehicles Affected:

FELLA: SM8312, SM9314
Diagnostics:

Version 1.0 - Initial Release.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 4

Vehicles Affected:

Challenger: MT600 C Series
Massey Ferguson: 8600 Series
General:

Vehicle Version 4.9.
Configuration:

Label code update for EXT V1.6 compatibility.
Software:

EXT Lite V0.1.6.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 5

Vehicles Affected:

Fendt: 5275CA, 5275CPLA, 6335CA, 6335CPLA
Laverda: M400A, M400LCA, M400LCIA, M410A, M400LCA
Massey Ferguson: 7360A, 7360PLA, 7370A, 7370PLA
Software:

New SD SW package V5.06.
New EXT-LT bios V0.14.
NT01 V563.
Diagnostics:

Vehicle diagnostic content initial release V1.0 of Diagnostic surfaces and Tests.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 6

Vehicles Affected:

Challenger: MT 700D Series
General:

Vehicle Version 1.7.
EEM4 Plugin updated to version 3.7.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 7

Vehicles Affected:

Valtra: S232-S352
General:

Vehicle Version 3.7.
Description terms update.
Air conditioning software reference has been removed.
Software:

EXT Lite V0.1.4.
Fixed the DCC displaying version issue (V2.11.0 instead of V2.1.0).

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 8

Vehicles Affected:

Massey Ferguson: 5600 Series
General:

Vehicle Version 1.4.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 9

Vehicles Affected:

Challenger: MT500 D Series
Massey Ferguson: 7600 Series
General:

Vehicle Version 4.8.
Configuration:

Label code update for EXT V1.6 compatibility.
Software:

EXT Lite V0.1.6.

--------------------------------------------------------------------------------

Release Notes - 3/1/2013 (Update 0114)

EDT NOTES:

EDT Version: 1.68.13051.643
Updated Sontheim DataCollection to v1.07.0914.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 1

Vehicles Affected:

Challenger: MT300 B Series
Massey Ferguson: MF3600 Series
General:

Included new Models: MF3630A, MF3640A, MF3650A.
Software:

New engine software.
Diagnostic:

Vehicle diagnostic version 3.5.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 2

Vehicles Affected:

Valtra: A-Series, N-Series, T-Series
General:

Vehicle Version 2.51.
Diagnostic Surface:

Gearbox pictures of Robot Shifter page updated for Hitech 5PS models.
Engine visibility defined for EEM3 models.
PTO solenoid picture fixed for Hitech models.
Fault Trees:

Schematic pictures of Fault trees updated for AC18.4 and AC19.4.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 3

Vehicles Affected:

Massey Ferguson: 4608, 4609, 4610
General:

Vehicle Version 1.1.
Changed color of battery charger light.
Diagnostics:

New engine Plugin V3.9 (removed ambient temperature labels, Battery voltage taken now from KWP2000).

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 4

Vehicles Affected:

Challenger: MT600 C Series
Massey Ferguson: 8600 Series
General:

Vehicle Version 4.8.
Network:

Fixed bug where the CCD was not displaying on the CAN network.
Software:

Auto5 - TECU V1.12.0 on Tier3 model.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 5

Vehicles Affected:

Fendt: 5275A, 5275PLA, 6335A, 6335PLA
Laverda: M400A, M400LCA, M400LCIA, M410A, M400LCA
Massey Ferguson: 7360A, 7360PLA, 7370A, 7370PLA
Software:

New SD SW package V5.05.
New EXT-LT bios V13.15.
Diagnostics:

Vehicle diagnostic content pre-release version 0.10.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 6

Vehicles Affected:

Massey Ferguson: 5600 Series
General:

Vehicle Version 1.3.
Test:

Manufacturing setting has been updated.
Error Report udpate.
Software:

DCC V2.0.0.
Auto5 - trans D4 V1.4.0.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 7

Vehicles Affected:

Challenger: MT500 D Series
Massey Ferguson: 7600 Series
General:

Vehicle Version 4.7.
Diagnostic Surface:

Power boost surface has been created.
Software:

DCC V2.0.0.
Auto5 - TECU V1.13.0.
Auto5 - Trans D4 V1.4.0.

--------------------------------------------------------------------------------

Release Notes - 2/15/2013 (Update 0113)

EDT NOTES:

EDT Version: 1.68.13025.651

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 1

Vehicles Affected:

Valtra: A-Series, N-Series, T-Series
General:

ANT-vehicle v 2.51.
Software:

Flashing of individual files from packages re-enabled.
New engine software for T153eD, T203D, T213V.
Diagnostic Surface:

Small fixes to Auxiliary hydraulics, reduces delays in displayed signals.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 2

Vehicles Affected:

Fendt: 5275A, 5275PLA, 6335A, 6335PLA
Laverda: M400A, M400LCA, M400LCIA, M410A, M400LCA
Massey Ferguson: 7360A, 7360PLA, 7370A, 7370PLA
Diagnostic:

Vehicle diagnostic content pre-release version 0.9.
Software flash and configuration.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 3

Vehicles Affected:

Challenger: RG600
General:

Vehicle Version 2.4.
Software:

Update software C1000 Terminal (CONS_01_04.zip). (Note: is only compatible with BIN_01_04.zip and CHS_01_04.zip)
Update software ECU Chassis (CHS_01_04.zip). (Note: is only compatible with CONS_01_04.zip and BIN_01_04.zip)
Update software ECU Sprayer (BIN_01_04.zip). (Note: is only compatible with CONS_01_04.zip and CHS_01_04.zip)
Diagnostic Surface:

Function "Agitation"; modified Actual Agitation Valve display (Actual Agitation Valve position is displayed starting from software version BIN_01_04.zip)
Configuration Section:

Modified "Reset Limit Drive Mode (Mechanical Braking)"; added Lifetime counters.
Added "Reset Spray Pump overspeed counter."
Configuration Section:

Modified flashing process (Update) for ECU Chassis and ECU Sprayer; all (user) settings and calibrations are restored automatically during the flash process.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 4

Vehicles Affected:

Challenger: TG 845
General:

Vehicle Version 1.2.
Software:

Software update transmission ECU (new parameters for new hydraulic valve/filter on dropbox of FWD).

--------------------------------------------------------------------------------

Release Notes - 2/1/2013 (Update 0112)

EDT NOTES:

EDT Version: 1.68.13025.651
General:

Enhanced the performance of EDT Lite Creator.
Fixed stability issues where EDT Lite Creator did not always build a valid EDT Lite Installer.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 1

Vehicles Affected:

Valtra: T-Series, N-Series
General:

ANT Vehicle Version 2.50.
Network Scan page updated for Small N.
Software:

New software packages:
Engine Software for N93, N103 and T3-series.
Diagnostic Surface:

Robot Shifter visibility fixed.
Rear linkage, PTO and N-auto pages set visible to AC19.
Slip control light added to Rear linkage page.
Fault trees:

Fault trees added for AC18.4 and AC19.4.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 2

Vehicles Affected:

Massey Ferguson: 4608, 4609, 4610
General:

Initial release version 1.0.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 3

Vehicles Affected:

Challenger: WR9770, WR9760, WR9740, WR9735, WR9725 (Tier IV and Tier II)
Massey Ferguson: WR9770, WR9760, WR9740, WR9735, WR9725 (Tier IV and Tier II)
General:

Minor changes to remove unnecessary calibration.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 4

Vehicles Affected:

Massey Ferguson: 5600 Series
General:

Vehicle Version 1.2.
Software:

New Engine software

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 5

Vehicles Affected:

Challenger: MT500 D Series
Massey Ferguson: 7600 Series
General:

Vehicle Version 4.6.
Tier2 option for the MT500D (565-585) models have been activated in North and South America region.
Diagnostic Surface:

Suspended cab intensity values have been added.
Configuration:

Fixed the label code reading issue on Dyna6 Challenger.
Test:

Manufacturer setting has been updated.
Software:

Corrected the issue which allowed the wrong software to be flashed.
Diagnostic Trouble Code:

Fixed the linkage error code description for 141 and 142.

--------------------------------------------------------------------------------

Release Notes - 1/4/2013 (Update 0111)

EDT NOTES:

EDT Version: 1.68.12338.743

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 1

Vehicles Affected:

Valtra: T-Series, N-Series
General:

ANT-vehicle v 2.47.
EEM4 Plug-In v 3.7.
Software:

New: Engine Software v 1.4 for all EEM4 models except T193H.
Diagnostic Surface:

Layout View page of Power Shuttle added for Hitech 5PS.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 2

Vehicles Affected:

Challenger: MT600 C Series
Massey Ferguson: 8600 Series
General:

Vehicle Version 4.7.
MF8600 Tier2 is now available in Australia region.
Configuration:

PVED-Cl steering valve parameter has been updated to support the model type.
Diagnostic Surface:

Connector number has been added in all diagnostic overview Tier4.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 3

Vehicles Affected:

Valtra: S232-S352/S233-S353
General:

Plugin udpate EEM4 Plugin V3.7.
Configuration:

PVED-Cl steering valve parameter has been updated to support the model type.
Software:

New Auto5-ISO V1.12.0 (Fix the VIN issue).

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 4

Vehicles Affected:

Challenger: MT500 D Series
Massey Ferguson: 7600 Series
General:

Vehicle Version 4.5.
7626 model has been added.
Fix the connection name translation.
Release note update.
Configuration:

PVED-Cl steering valve parameter has been updated to support the model type.
Fix the DCC hour setting.
Fix the description translation of transmission label code.
Software:

Fixed issue with engine software between 7624 and 7626 models.
Diagnostic Trouble Code:

Fixed description of error code R141 and R142.

--------------------------------------------------------------------------------

Release Notes - 12/14/2012 (Update 0110)

EDT NOTES:

EDT Version: 1.68.12338.743
General:

New Sontheim lower layers (MDT v1.07.913).

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 1

Vehicles Affected:

Valtra: T-Series, N-Series
General:

New Small N vehicles AC18.4 and AC19.4 added.
Software flash now checks for correct hardware ID before flashing.
Special Download tool added under software page.
New Software Packages:

AC15.33 (1.4.1.0)
AC16.0 (1.2.0.0)
AC16.2 (1.4.0.0)
AC18.0 (1.2.0.0)
AC16.3 (1.6.0.0)
AC18.4 (1.2.0.0)
AC19 (1.4.0.0)
Software Packages Removed:

AC14.2
AC14.22
AC15.2
AC15.22
Diagnostic Surface:

Throttle layout of Cruise page on AC16.2 updated.
Front hydraulic page updated and set visible.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 2

Vehicles Affected:

Challenger: MT600 C Series
Massey Ferguson: 8600 Series
General:

Vehicle Version 4.6.
Fix the ISO/Engine connection which was always in Tier3.
Update EEM4 engine plugin to v3.7.
Diagnostic Surface:

Remove the Sisu WinEEM3 link in Tier4.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 3

Vehicles Affected:

Challenger: RG600
General:

Vehicle Version 2.3.
Added EEM3 Plugin v1.6.
Update EEM4 Plugin v3.6.
Update AG150 Plugin update v1.17.
Update PVED-CL Plugin v1.13.
Software:

Update software C1000 Terminal (CONS_01_03.zip) (Note: is only compatible with BIN_01_03.zip and CHS_01_03.zip).
Update software ECU Chassis (CHS_01_03.zip) (Note: is only compatible with CONS_01_03.zip and BIN_01_03.zip).
Update software ECU Sprayer (BIN_01_03.zip) (Note: is only compatible with CONS_01_03.zip and CHS_01_03.zip).
Update software C3000 Terminal (X30_AGCO_V3.13.48_rel_full_upgrade).
Update software GX-45 Terminal (PCS150_V2.09.10_full_upgrade.zip).
Update software Suspension/4WS ECU (Challenger2v138.mhx).
Diagnostic Surface:

Added surface "Automatic Leveling Mode / Level Height Mode".
Added surface "Clean Water Tank Level" (Only for Model Year 2013 machines).
Calibration Section:

Added "Zero Point Calibration of Steer Angle Sensor(s)" (Only for Model Year 2013 machines).
Added "Zero Point Calibration of Height Angle Sensor(s)" (Only for Model Year 2013 machines).
Added "Zero Point Calibration of Guidance Steer Angle Sensor" (Only for Model Year 2013 machines).
Diagnostic Test:

Added "Scan Blank, Chassis or Sprayer ECU".

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 4

Vehicles Affected:

Challenger: TG 845
General:

Vehicle Version 1.1.
Initial Release.
Plugin EEM4 v3.6
Plugin AGCOMMAND v1.9.
Plugin SGR-1 v1.4.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 5

Vehicles Affected:

Challenger: WR9770, WR9760, WR9740, WR9735, WR9725 (Tier IV and Tier II)
Massey Ferguson: WR9770, WR9760, WR9740, WR9735, WR9725 (Tier IV and Tier II)
General:

Updated Main Controller Software to 1.3.2
Pump and Motor Calibration MUST be completed after installing.
Updated C1000 Software to 1.2.3.
Updated TopCon Plugin.
Software:

Main Controller 1.3.2
Increased torque at low speed in 2nd and 3rd range.
C1000 1.2.3
Counter values preserved when updating software.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 6

Vehicles Affected:

Massey Ferguson: 5600 Series
General:

Vehicle Version 1.1.
Fix the help file link displaying.
Software:

New Keyboard V2.0.1.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 7

Vehicles Affected:

Challenger: MT500 D Series
Massey Ferguson: 7600 Series
General:

Vehicle Version v4.4.
Update EEM4 engine plugin to v3.7.
Software:

New Keyboard V2.0.1.

--------------------------------------------------------------------------------

Release Notes - 11/30/2012 (Update 0109)

EDT NOTES:

EDT Version: 1.68.12325.848

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 1

Vehicles Affected:

Valtra: BH145, BH165, BH180, BH185i, BH205
General:

Updated System 150 and PVED Diagnostics.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 2

Vehicles Affected:

Challenger: MT600 C Series
Massey Ferguson: 8600 Series
General:

Vehicle Version 4.5.
Fixed the AGCOMMAND missing plugin.
Fixed the EEM3 link (DCU path).
Software:

New Light Module V1.8.0.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 3

Vehicles Affected:

Rogator: RG 900, RG 1100, RG 1300
Challenger: RG 900, RG 1100, RG 1300
General:

Vehicle Version 1.16.
Software:

Updated Norac UC5 software to version 4.3.0.2.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 4

Vehicles Affected:

Valtra: S232-S352
General:

Vehicle Version 3.6.
Configuration:

Fixed the VIN reading issue.
Software:

New Light Module V1.8.0.
Diagnostic Trouble Code:

Dashboard error codes (D101 -> D105) have been added.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 5

Vehicles Affected:

Challenger: TG 8300
TerraGator: 7300, 8300, 8400
General:

Vehicle version 1.10.
Assisted Steering and Guidance:

Fixed image size on certain images in calibrations and configurations.
Fixed an issue where EDT was not finding the PVED and SASA on the correct CAN bus.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 6

Vehicles Affected:

Challenger: MT500 D Series
Massey Ferguson: 7600 Series
General:

Vehicle Version 4.3.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 7

Vehicles Affected:

Massey Ferguson: 5600 Series
General:

Vehicle Version 1.0.
Initial release.

--------------------------------------------------------------------------------

Release Notes - 11/16/2012 (Update 0107)

EDT NOTES:

EDT Version: 1.67.12317.919

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 1

Vehicles Affected:

Valtra: T-Series, N-Series, A-Series
General:

PVED_CL-PlugIn - steering valve parameters for T-series fixed.
Software:

New software packages:
AC14.3 (1.7.0.0)
AC14.33 (1.4.0.0)
AC15.3 (1.7.0.0)
AC15.33 (1.4.0.0)
AC16.3 (1.5.0.0)
AC 19 (1.3.0.0)
Diagnostic Surface:

PTO page added for A3.
Order of Power Shuttle pages changed.
Configuration:

TC1 Index help files visible.
Writing of PVED-CC Auxiliary valve spool parameters fixed.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 2

Vehicles Affected:

Challenger: MT600 C Series
Massey Ferguson: 8600 Series
General:

Vehicle Version v4.4.
EEM4 Plugin update V3.6.
Configuration:

Fix the DCC displaying label code issue on all Tier3 tractors.
Fix the Armrest displaying label code issue on AGCO tractors.
Diagnostic Surface:

Quick streer update surface.
Software:

Fixed extension issue on DCC for flashing a specific software file.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 3

Vehicles Affected:

Gleaner: S67, S77
General:

Smart Cooling changes (improvements to air flow and cleanliness of engine compartment):
Changed the minimum pitch of fan while in Smart Cooling mode to 50% pitch.
Fan will go to full forward pitch for fifteen seconds after reversing to clean engine compartment.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 4

Vehicles Affected:

Challenger: TerraGator 8333 CVT
General:

Vehicle Version 2.2.
Sisu EEM3 Plug-in updated to Version 1.6.
PVED-CL Plug-in updated to Version 1.12.
TopCon System 150 Plug-in updated to Version 1.17.
Software:

Update Falcon VT Software Package (Version 1.6.9.11B).
Update TopCon 150 System (Version 2.09.10).

--------------------------------------------------------------------------------

Release Notes - 11/2/2012 (Update 0106)

EDT NOTES:

EDT Version: 1.67.12270.967

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 1

Vehicles Affected:

Challenger: MT600 C Series
Massey Ferguson: 8600 Series
General:

Vehicle Version 4.3.
AG150 Plugin update V1.17.
EEM4 Plugin update V3.5.
Configuration:

Fix the max value of maintenance hour.
Compatibility EXT-Lite transmission V1.6.
Diagnostic Surface:

Take over control view of the Front axle has been updated.
Software:

CCD V1.80

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 2

Vehicles Affected:

Challenger: MT700 C, MT800 C, MT900 C
General:

Vehicle Version 3.18.
Husco Plug-in Updated to Version 2.8.
Calibrations:

Added ability to look up Auxiliary and Hitch Valve Calibration Values based on valve stack serial number.
Software:

Fixed an issue in the Auxiliary and Hitch Hydraulics Software Flash that could cause the controller to become unresponsive in certain situations.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 3

Vehicles Affected:

Challenger: MT 700D Series
General:

Vehicle Version 1.6.
Husco Hydraulic Plugin updated to Version 2.8.
Calibrations:

Added ability to look up Auxiliary and Hitch Valve Calibration Values based on valve stack serial number.
Software:

Fixed an issue in the Auxiliary and Hitch Hydraulics Software Flash that could cause the controller to become unresponsive in certain situations.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 4

Vehicles Affected:

Challenger: 540C, 560C
Massey Ferguson: 9540, 9560
General:

Added Tier2 engine software to Australian models to correct engine file.
Extended support for the EEM4 controller.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 5

Vehicles Affected:

Rogator: RG 900, RG 1100, RG 1300
Challenger: RG 900, RG 1100, RG 1300
General:

Vehicle Version 1.15.
Software:

Fixed an issue with the Rexroth Drive Control ECU flash that would skip the download on model year 2013 machines.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 6

Vehicles Affected:

Valtra: S232-S352
General:

Vehicle Version 3.4.
Plugin udpate EEM4 Plugin V3.5.
Plugin udpate AG150 V1.17.
Plugin udpate C1000 V1.5.
Plugin update PVED-CL Plugin V1.13.
Compatibility new ACHT color.
Configuration:

Compatibility EXT-Lite transmission V1.6.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 7

Vehicles Affected:

Gleaner: S67, S77
General:

Model selection: replaced "2012" with "2012-"

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 8

Vehicles Affected:

Challenger: MT500 D Series
Massey Ferguson: 7600 Series
General:

Vehicle Version 4.2.
Plugin udpate EEM4 Plugin V3.5.
Plugin udpate AG150 V1.17.
Plugin update PVED-CL Plugin V1.13.
Configuration:

Compatibility EXT-Lite transmission V1.6.
Diagnostic Surface:

Fix the air pressure braking surface issue (freezing).
Diagnostic Trouble Code:

The stored codes filter (41Cx) is now active.
Software:

CCD V1.80
Auto5-TECU V1.12.0
Dashboard DCC V1.9.0

--------------------------------------------------------------------------------

Release Notes - 10/19/2012 (Update 0105)

EDT NOTES:

EDT Version: 1.67.12270.967

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 1

Vehicles Affected:

Valtra: T-Series, N-Series
General:

AC14.32 added.
AC15.32 added.
Parameters for steering valve PVED-CL plug-in updated.
Software Packages:

AC14.32 & AC14.33 1.3.0.0
AC15.32 & AC15.33 1.3.0.0
AC16.3 1.4.0.0
AC18.4 1.1.0.0
AC19 1.1.0.0
TwinTrac 1.2.0.0

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 2

Vehicles Affected:

Rogator: RG 900, RG 1100, RG 1300
Challenger: RG 900, RG 1100, RG 1300
General:

Vehicle Version 1.14.
Configuration:

Added "Four Wheel Steer Configuration."
Software:

C1000 Virtual Terminal: Updated software to 1.7.2.120915.2132

--------------------------------------------------------------------------------

Release Notes - 10/5/2012 (Update 0104)

EDT NOTES:

EDT Version: 1.67.12270.967

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 1

Vehicles Affected:

Valtra: T-Series, N-Series, A-Series
General:

Help-anchors for diagnostic pages updated.
Diagnostic Surface:

Cruise pages for N3/T3 added.
Engine Starting test added.
AutoTraction page for AC18.0 removed.
Fronthydraulic page removed.
Picture of hydraulic plate added for A3.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 2

Vehicles Affected:

Challenger: MT700 C, MT800 C, MT900 C
General:

Vehicle Version 3.17.
Husco Plug-in Updated to Version 2.7.
Topcon Systems Plug-in updated to Version 1.17.
Software:

700/800 Transmission Software Updated to Version 0.425.4515.00.
Instrument Cluster Software Updated to Version 2-3-0.
Armrest Software Updated to Version 2.88.0.0.
Lighting Module Software Updated to Version 3.33.0.0.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 3

Vehicles Affected:

Challenger: MT 700D Series
General:

Vehicle Version 1.5.
Husco Hydraulic Plugin updated to Version 2.7.
Topcon Systems Plugin updated to Version 1.17.
EEM4 Plugin updated to Version 3.5.
Software:

Armrest Software Updated to Version 2.88.0.0.
Lighting Module Software Updated to Version 3.33.0.0.

--------------------------------------------------------------------------------

Release Notes - 9/21/2012 (Update 0103)

EDT NOTES:

Software Information:

EDT Version: 1.67.12254.484


Fixed an issue where a memory leak was causing EDT to run out of memory and report GDI+ error message and/or display a white box with a red 'x' on graphical controls.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 1

Vehicles Affected:

Valtra: T-Series, N-Series
General:

AC14.33 added.
AC15.33 added.
AC16.33 added.
Plug-Ins updated:
EEM3 v1.6.
EEM4 v3.5.
Auto-Guide 151 v1.17.
PVED-CL v1.12.
Diagnostic Tests:

HST-test updated.
Software:

New tractor software packages for N3 & T3 models:
AC14.32 & AC14.33 1.2.0.0
AC15.32 & AC15.33 1.2.0.0

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 2

Vehicles Affected:

Challenger: MT600 C Series
Massey Ferguson: 8600 Series
General:

Vehicle Version 4.2.
AG150 update.
Diagnostic Test:

Fix an error code description issue in the error report creation.
Configuration:

VIN reading update for compatibility with TECU V1.12.
Fix the internal error issue in the Specific File configuration.
Fix the protuguese translation issue in EXT label code.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 3

Vehicles Affected:

Gleaner: S67, S77, R66, R76
General:

Removed s77 from Massey Ferguson selection.
Software:

Added fuse panel v2.4.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 4

Vehicles Affected:

Challenger: MT500 D Series
Massey Ferguson: 7600 Series
General:

Vehicle Version 4.0.
Fix the right console type selection issue.
AG150 update (Dimension files).
Configuration:

VIN reading update for compatibility with TECU V1.12.
Fix the DCC code E (Max speed) displaying issue.
Diagnostic Surface:

Fix the slide issue in suspended cab surface.
Fix Joystick value issue in Hydraulic surface connection 2.
Fix the air pressure braking surface issue (freezing).
Diagnostic Trouble Code:

Fix the Air conditionning code error which display error code 0.
Fix the DCC active code displaying issue.

--------------------------------------------------------------------------------

Release Notes - 9/7/2012 (Update 0102)

EDT NOTES:

EDT Version: 1.67.12244.635

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 1

Vehicles Affected:

Gleaner: S77
General:

Removed s77 from Massey Ferguson selection.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 2

Vehicles Affected:

Challenger: TerraGator 8333
General:

Vehicle Version 2.1.
Sisu EEM3 Plug-in updated to Version 1.5.
AGCOMMAND Plug-in updated to Version 1.9.
PVED-CL Plug-in updated to Version 1.10.
Added SGR-1 Plug-in Version 1.4.
Software:

Update DCC3 software (Version 0.1.0.47)
Improved Fuel Level Indication.
Throttle Pedal Error Code D133 removed.
Added Falcon VT Software Package (Version 1.6.9.B).

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 3

Vehicles Affected:

Challenger: WR9770, WR9760, WR9740, WR9735, WR9725 (Tier IV and Tier II)
Massey Ferguson: WR9770, WR9760, WR9740, WR9735, WR9725 (Tier IV and Tier II)
General:

Updated Engine Plug-in to 3.5.
Added Australian/New Zealand/Japan as region for WR9740 (Tier II), WR9760 (Tier II) WR9770 (Tier II).

--------------------------------------------------------------------------------

Release Notes - 8/24/2012 (Update 0101)

EDT NOTES:

EDT Version: 1.67.12226.718

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 1

Vehicles Affected:

Challenger: MT300 B Series
Massey Ferguson: MF3600 Series
Software:

CaSt-Sw for 24/12 Transmission included.
Diagnostic:

Vehicle diagnostic version 3.4.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 2

Vehicles Affected:

Challenger: MT600 C Series
Massey Ferguson: 8600 Series
General:

Vehicle version 4.2.
Portuguese and Turkish translation update.
Configuration:

Fix the regression VIN displaying bug with the version lower than 1.7.0.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 3

Vehicles Affected:

Challenger: 648C, 652C
Fendt: 5275C, 5275CPL, 6335C, 6335CPL
Laverda: M400, M400LC, M400LCI, M410, M400LC
Massey Ferguson: 7360, 7360PL, 7370, 7370PL
Software:

New ENEDC-, FTD1-, FTD2-, LEVEL- Software package version 0004_0010
Sieves reset procedures included.
Diagnostic Surface:

Vehicle diagnostic content version 1.9.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 4

Vehicles Affected:

Gleaner: S67, S77
General:

Added FP2.4 sw for the lateral tilt.
Added sw for tier 2 Engines (Australia/New Zealand).
Changed LTM visibility for Dealers.
Software:

Added FP2.4 software as a back plan for sw FP2.11.
Added Tier 2 engine sw for S67 (234-256-837058069.hex).
Added Tier 2 engine sw for S77 (234-256-837058071.hex).

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 5

Vehicles Affected:

Challenger: WR9770, WR9760, WR9740, WR9735, WR9725 (Tier IV and Tier II)
Massey Ferguson: WR9770, WR9760, WR9740, WR9735, WR9725 (Tier IV and Tier II)
General:

Updated EEM4 and AG 150 plug-ins.
Added Asia as region for Tier II.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 6

Vehicles Affected:

Challenger: MT500 D Series
Massey Ferguson: 7600 Series
General:

Vehicle version 4.0.
Portuguese and Turkish translation update.

--------------------------------------------------------------------------------

Release Notes - 8/15/2012 (Update 0100)

EDT NOTES:

EDT Version: 1.67.12226.718
General:

Fixed a critical error in EDT framework that produced critical error during Network Scan, Software Flash, and Diagnostic Trouble Codes.

--------------------------------------------------------------------------------

Release Notes - 8/10/2012 (Update 0099)

EDT NOTES:

EDT Version: 1.67.12215.668

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 1

Vehicles Affected:

Challenger: MT540, MT560, MT570, MT580
Massey Ferguson: 7350, 7370, 7390, 7415
Valtra: BT150, BT170, BT190, BT210
General:

Vehicle Version 3.6.
Configuration:

Fix the label code G displaying in mode offline.
Software:

Release V2.09.10 - AG150.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 2

Vehicles Affected:

Challenger: CH654B, CH658B
Fendt: 8370, 8400, 9470X
Massey Ferguson: 7280, 7282, 9280
Software:

New AG152 SW Version V2.09.10.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 3

Vehicles Affected:

Challenger: 648C, 652C
Fendt: 5275C, 5275CPL, 6335C, 6335CPL
Laverda: M400, M400LC, M400LCI, M410, M400LC
Massey Ferguson: 7360, 7360PL, 7370, 7370PL
Software:

New ENEDC-, FTD1-, FTD2-, LEVEL- Software package version 0004_0009
Fixed sieves control.
Reduced Drum speed increasing bug.
Modified devices engagement/disengagement priority vs unloading auger.
Header engagement policy modified.
Added header compensation mode (Float).
Diagnostics:

Vehicle diagnostic content version 1.8.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 4

Vehicles Affected:

Rogator: RG 900, RG 1100, RG 1300
Challenger: RG 900, RG 1100, RG 1300
General:

Vehicle Version 1.13.
Diagnostics:

Added "Engine Fan" function to display fan speed and status.
Software:

Rexroth Hydrostatic Control: Updated to version 1.18
Added pressure compensation functionality to improve high torque handling.
For first time update on model year 2012 RG 1300s, follow pump adjustment procedures in AGCO Service Bulletin 12-0143.
Armrest ECU: Updated to version 1.0.0.120629.1500
Added disengagement of Auto Guidance when rear axle angle is greater than 10 degrees to improve path acquisition.

--------------------------------------------------------------------------------

Release Notes - 7/27/2012 (Update 0098)

EDT NOTES:

EDT Version: 1.66.12159.692

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 1

Vehicles Affected:

Laverda: AL4 Evo
Software:

Combine software version 01v04.
Engine Tier3 software.
Diagnostics:

Vehicle diagnostic content version 1.1:
Combine diagnostic surface.
Joystick calibration.
Rear lift sensor calibration.
Set speed parameter.
Set leveling parameter.
Combine software flash.
EEM3 plugin version 1.6.
EEM4 plugin version 3.3.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 2

Vehicles Affected:

Valtra: T-Series, N-Series, A-Series
General:

SUS1 added for Hitech models.
AC16.2 / T151eh and T171h added for South America.
Diagnostic Surface:

HST-icon changed to more understandable.
Gas pedal adjustment page visible for A3.
Drive pedal page for Direct AC14.2 visible.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 3

Vehicles Affected:

Challenger: MT600 C Series
Massey Ferguson: 8600 Series
General:

Vehicle Version 4.1.
Diagnostic Test:

Error report creating.
Software:

Update warning flashing message.
AG152: New software V2.09.10.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 4

Vehicles Affected:

Challenger: 648C, 652C
Fendt: 5275C, 5275CPL, 6335C, 6335CPL
Laverda: M400, M400LC, M400LCI, M410, M400LC
Massey Ferguson: 7360, 7360PL, 7370, 7370PL
Diagnostics:

Vehicle diagnostic content version 1.7.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 5

Vehicles Affected:

Challenger: 520C, 530C, 540C, 550C, 560C
Fendt: 9390R, 9450R, 9480R
Massey Ferguson: 9520, 9530, 9540, 9550, 9560
Software:

SW version 2.1.0.3 to be flashed on:
VMM(1,2,3,4,5,6); EMU; HMM
VMM'S & EMU module:

Added Concave offset operation and display.
Improved Threshing clutch engagement.
Fix s/w bug to disable Tilt in RTC-Tilt mode.
Added Backup lights ON, when Field lights & Thresher ON.
Added system option for AGCO yield monitoring.
Added Portuguese Language.
Updated MVec fuse display.
HMM module:

Fix for the Starter relay, false DTC.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 6

Vehicles Affected:

Valtra: S232-S352
General:

Vehicle Version 3.4.
Networkscan:

Controller version has been updated.
Diagnostic Test:

Error report creating.
Diagnostic Surface:

Take over control view of the Front axle has been updated.
Configuration:

VIN update compatibility.
A5_ISO_V1_10_00.bin.
AG152: New software V2.09.10.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 7

Vehicles Affected:

AGCO: RTA / DTA Series
Challenger: MT500 B / MT500 BSeries
Massey Ferguson: 6400 / 7400 / 8400 Series
General:

Vehicle Version 2.4.
Software:

AG152: New software V2.09.10.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 8

Vehicles Affected:

Challenger: MT500 D Series
Massey Ferguson: 7600 Series
General:

Vehicle Version 3.9.
Configuration:

Fixed the engine hour displaying bug in Dashboard hour setting surface.
Software:

Update warning flashing message.
AG152: New software V2.09.10.

--------------------------------------------------------------------------------

Release Notes - 7/13/2012 (Update 0096)

EDT NOTES:

EDT Version: 1.66.12159.692

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 1

Vehicles Affected:

Challenger: MT300 B Series
Massey Ferguson: MF3600 Series
General:

Solved translation issue.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 2

Vehicles Affected:

Challenger: CH654B, CH658B
Fendt: 8370, 8400, 9470X
Massey Ferguson: 7280, 7282, 9280
Software:

New engine software version 1.3.10.
Diagnostics:

EEM4 diagnostic version 3.3.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 3

Vehicles Affected:

Challenger: 648C, 652C
Fendt: 5275C, 5275CPL, 6335C, 6335CPL
Laverda: M400, M400LC, M400LCI, M410, M400LC
Massey Ferguson: 7360, 7360PL, 7370, 7370PL
Software:

New ENEDC-, FTD1-, FTD2-, LEVEL- Software package version 0004_0007.
Optimized alarm management.
Modified drum speed control.
Changed threshing engage controls.
Diagnostics:

Vehicle diagnostic version 1.6.
Fixed an issue with parameters.
EEM4 diagnostic version 3.3.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 4

Vehicles Affected:

Rogator: RG 900, RG 1100, RG 1300
Challenger: RG 900, RG 1100, RG 1300
General:

Vehicle Version 1.12.
Calibrations:

Steering Valve Spool Calibration: Updated parameters to fix valve chatter when PVED-CL is active.
Configuration:

VIN Setup: Fixed an issue where EDT would save and recall the VIN correctly on Challenger branded RoGators, but did not display it correctly to the user.
Software:

Headlight ECU Software: Updated to version 6.0.
Chassis ECU Software: Updated to version 6.0.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 5

Vehicles Affected:

Challenger: RG600
General:

Vehicle Version 2.2.
Added EEM3 diagnostic version 1.5.
Software:

Update software C1000 Terminal (CONS_01_02.zip).
NOTE: only compatible with BIN_01_02.zip and CHS_01_02.zip.
Update software ECU Chassis (CHS_01_02.zip).
NOTE: only compatible with CONS_01_02.zip and BIN_01_02.zip.
Update software ECU Sprayer (BIN_01_02.zip).
NOTE: only compatible with CONS_01_02.zip and CHS_01_02.zip.
Diagnostic Surface:

Added surface "Electronic Ground Switch" (only for model year 2012-2 machines).
Update surface "Spray Pump/ Pump Mode" (changed RPM values).
Flash Section:

Added by EOL/Update of ECU Chassis software of the RG635/RG635B a selection for the installed version of wheel gear box (Standard or High Torque version).

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 6

Vehicles Affected:

TerraGator: 6303, 8303
General:

Vehicle version 2.7.
Added diagnostics for Guidance and Assisted Steering.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 7

Vehicles Affected:

Challenger: TG 8300
TerraGator: TG 7300, TG 8300, TG 8400
General:

Vehicle Version 1.9.
Added diagnostics for Guidance and Assisted Steering.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 8

Vehicles Affected:

Challenger: WR9770, WR9760, WR9740, WR9735, WR9725 (Tier IV and Tier II)
Massey Ferguson: WR9770, WR9760, WR9740, WR9735, WR9725 (Tier IV and Tier II)
Software:

Main Controller V 1.2.4
Fix for four-way switch and lower floatation set point.
C1000 V 1.2.2
Fix for lower floatation set point.
NOTE: The main controller and C1000 need to be updated to these versions at the same time.

--------------------------------------------------------------------------------

Release Notes - 6/29/2012 (Update 0095)

EDT NOTES:

EDT Version: 1.66.12159.692

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 1

Vehicles Affected:

Valtra: T-Series, N-Series
General:

New AC-system AC19.3 for N3 Hitech5.
Network Scan:

SUS1 added for Versu and Direct.
Diagnostic Surface:

Creeper visible for AC15.
EEM4 hand throttle signal for Cruise pages added.
Front hydraulic pages added.
Solenoid valve plate picture of Rear linkage changed for AC14/15 and AC16/18.
Diagnostic Tests:

Hydrostatic Unit Test: engine rpm display added, pressure limits changed.
Calibrations:

Some error codes added to robot calibrations.
Software:

New software packages:
AC14.2 (1.22.0.0)
AC14.22 (1.5.0.0)
AC14.3 (1.6.0.0)
AC15.2 (1.18.0.0)
AC15.22 (1.5.0.0)
AC15.3 (1.6.0.0)
AC16.0 (1.1.0.0)
AC16.2 (1.3.0.0)
AC16.3 (1.3.0.0)
AC18.0 (1.1.0.0)
AC19 (1.1.0.0)
SUS1 (1.2.0.0)
SECU (1.2.0.0)

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 2

Vehicles Affected:

Challenger: MT600 C Series
Massey Ferguson: 8600 Series
General:

Vehicle Version 4.0.
Software:

Auto5-Armrest V1.10.0.
Flash a specific file is now available in test tab.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 3

Vehicles Affected:

Challenger: MT700 C, MT800 C, MT900 C
General:

Vehicle Version 3.16.
Husco Plug-in Updated to Version 2.4.
AGCOMMAND Plug-in updated to Version 1.9.
Topcon Systems Plug-in updated to Version 1.15.
Software:

C1000 Software Updated to V 1.8.0.20111221.0009.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 4

Vehicles Affected:

Challenger: MT 700D Series
General:

Vehicle Version 1.2.
Husco Hydraulic Plugin updated to Version 2.4.
AGCOMMAND Plugin updated to Version 1.9.
Topcon Systems Plugin updated to Version 1.15.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 5

Vehicles Affected:

Challenger: 520C, 530C, 540C, 550C, 560C
Fendt: 9450R, 9480R
Massey Ferguson: 9520, 9530, 9540, 9550, 9560
Software:

Combine Version 2.1.0.2.
Fix for aggressive hydraulic thresher clutch.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 6

Vehicles Affected:

Rogator: RG 900, RG 1100, RG 1300
Challenger: RG 900, RG 1100, RG 1300
General:

Vehicle Version 1.11.
Engine self-tests available for SCR engines.
Diagnostic Connections:

Added Norac UC5 diagnostics to "Guidance and Third Party Diagnostics" connection.
Software:

Headlight ECU Software: Updated to version 5.0.
Chassis ECU Software: Updated to version 5.0.
Instrument cluster: Updated to version 2.4.1 and updated engine fan parameters.
Armrest ECU: Updated to version 1.0.0.120525.1100.
Engine software: Updated SCR engine software to 1.3.10.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 7

Vehicles Affected:

Challenger: MT500 D Series
Massey Ferguson: 7600 Series
General:

Vehicle Version 3.8.
Diagnostic Surface:

Braking pressure and supply sensor Voltage scale has been corrected in High pressure braking.
Calibration:

Fingertip, Joystick, Hand throttle, Depht knob and T-Handle can be calibrated.
Configuration:

VIN update (Compatibility with TECU V1.11.0).
Software:

A5_TECU V1_11_0.bin
A5_T1_D6_V3_8_0.bin
A5_T2_D6_V3_8_0.bin
DCC3_D4_V1_8_0.hex
DCC3_D6_V1_8_0.hex
DCC3_DCVT_V1_8_0.hex
MultiPad, Armrest and keyboard flashing has been fixed

--------------------------------------------------------------------------------

Release Notes - 6/15/2012 (Update 0094)

EDT NOTES:

EDT Version: 1.66.12159.692

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 1

Vehicles Affected:

Challenger: MT540, MT560, MT570, MT580
Massey Ferguson: 7350, 7370, 7390, 7415
Valtra: BT150, BT170, BT190, BT210
General:

Vehicle Version 3.5.
Configuration:

Fix the Code G description list.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 2

Vehicles Affected:

Challenger: 648C, 652C
Fendt: 5275C, 5275CPL, 6335C, 6335CPL
Laverda: M400, M400LC, M400LCI, M410, M400LC
Massey Ferguson: 7360, 7360PL, 7370, 7370PL
Software:

New TECU language files for:
Estonian
Lithuanian
Polish
Romanian
Slovak
Serbian

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 3

Vehicles Affected:

Challenger: MT700 C, MT800 C, MT900 C
General:

Vehicle Version 3.14.
Husco Plug-in Updated to Version 2.3.
Software:

Armrest Software Updated to V2.81.0.0.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 4

Vehicles Affected:

Challenger: MT 700D Series
General:

Vehicle Version 1.0.
Initial Release.
Software:

Armrest Software V2.81.0.0
Main Machine Module Software V0.398.1944.00
Instrument Cluster V2.4.1
Front Lighting Software V3.32.0.0
Rear Lighting Software V3.32.0.0
Roof Lighting Software V3.32.0.0
Aux Valve Software V0.0.5.01
3-Point Hitch Valve Software 0.0.1.00

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 5

Vehicles Affected:

Challenger: 520C, 530C, 540C, 550C, 560C
Fendt: 9450R, 9480R
Massey Ferguson: 9520, 9530, 9540, 9550, 9560
Diagnostics:

Engine diagnostics version 3.3.
AGCOMMAND diagnostics version 1.9.
Added diagnostic screens for Processor.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 6

Vehicles Affected:

Gleaner: S67, S77, R66, R76
General:

EEM3 Engine diagnostics version 1.5.
EEM4 Engine diagnostics version 3.3.
AGCOMMAND diagnostics version 1.9.
Software:

Fuse Panel version 2.11
Adjustable LTM speed.
Configuration:

Adjust LTM Speed (requires Fuse Panel version 2.11).
Network Scan:

Fuse Panel and EIP status linked to flash download page.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 7

Vehicles Affected:

Challenger: 660B, 670B, 680B
Fendt: 9300R, 9350R, 9460R
Gleaner: A66, A76, A86
Laverda: ML700, ML800
Massey Ferguson: 9695, 9795, 9895
General:

A.H.H.C improvement
Revised header height control.
Revised operator interface for header mode selection.
"Power Flow" header in header selection list.
Automatic accumulator ON/OFF control (VMM6-O4 J1-25/35).
Software:

SW version 1.6.0

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 8

Vehicles Affected:

Challenger: WR9770, WR9760, WR9740, WR9735, WR9725 (Tier IV and Tier II)
Massey Ferguson: WR9770, WR9760, WR9740, WR9735, WR9725 (Tier IV and Tier II)
Software:

1.3.10 Engine Software for Tier II machines
Displays ambient temp on VT.
Diagnostic Surface:

EEM4 Plug-in displays for Tier II.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 9

Vehicles Affected:

AGCO: RTA / DTA Series
Challenger: MT500 B / MT500 BSeries
Massey Ferguson: 6400 / 7400 / 8400 Series
General:

Vehicle Version 1.8.
Configuration:

PVED-CL parameter update matching with Wintest.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 10

Vehicles Affected:

Challenger: MT500 D Series
Massey Ferguson: 7600 Series
General:

Vehicle Version 3.7.
Network:

Fix the Auto5 Silent mode issue.
Network summary: software versionning update.
Software:

A5_T1_D6_V3_7_0.bin
A5_T2_D6_V3_7_0.bin
A5_T1_D4_V1_1_0.bin
A5_T2_D4_V1_1_0.bin
A5_Linkage_V2_8_0.bin
DCC3_D4_V1_7_0.bin
DCC3_D6_V1_7_0.bin
Diagnostic Surface:

Update of braking system surface Dyna6.

--------------------------------------------------------------------------------

Release Notes - 6/1/2012 (Update 0093)

EDT NOTES:

EDT Version: 1.66.12130.1247

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 1

Vehicles Affected:

ATS: System 150 (universal support)
General:

Updated to software version 2.09.10.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 2

Vehicles Affected:

ATS: HiPer AG
General:

Fixed Bug with Launching Modem TPS.
Added HiPer AG Software loading procedure and software.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 3

Vehicles Affected:

Challenger: 648C, 652C
Fendt: 5275C, 5275CPL, 6335C, 6335CPL
Laverda: M400, M400LC, M400LCI, M410, M400LC
Massey Ferguson: 7360, 7360PL, 7370, 7370PL
Software:

New TECU language files for:
Hungarian
Slovak

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 4

Vehicles Affected:

ATS: SGR-1
General:

fixed issue where EDT could not launch TRU.

--------------------------------------------------------------------------------

Release Notes - 5/18/2012 (Update 0092)

EDT NOTES:

EDT Version: 1.66.12130.1247
General:

EDT will now disable the DTC or Network Scan sections, if no functionality is present in either section.
Added the ability to show a text description on Calibrations, Configurations and Diagnostic Tests.
Added a notification on ECUs in the network scan when new software is available.
Changed the unit abbreviation for 'Kilometres per hour' from 'kph' to 'km/h'.
Changed the styling on popup windows to match the overall EDT style.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 1

Vehicles Affected:

Challenger: 648C, 652C
Fendt: 5275C, 5275CPL, 6335C, 6335CPL
Laverda: M400, M400LC, M400LCI, M410, M400LC
Massey Ferguson: 7360, 7360PL, 7370, 7370PL
Software:

New TECU language files for:
Russian, Polish, Czech, Romanian, Serbian.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 2

Vehicles Affected:

Challenger: MT700 C, MT800 C, MT900 C
General:

Vehicle Version 3.14.
Software:

Aux Valves Software Updated to Version 0.0.5.01.
Lighting Controller Software Updated to Version 3.32.0.0.
Aux and Hitch Valve Calibration Surface Updated.
Aux and Hitch Valve Controller Replacement Configuration added:
Designed to replace damaged valve controllers that are still able to respond to EDT. Valve calibration data is backed up, a new controller is flashed, and the calibration data is written to new controller.
Aux and Hitch Valve Configuration Surface Added:
Page to reassign existing valve controllers, assign blank and unassigned valve controllers, and troubleshoot valves.
Advanced Engineering Functions Added:
Authorization required: Allows Engineering to write memory and change memory in Aux and Hitch Valve Controllers.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 3

Vehicles Affected:

Rogator: RG 900, RG 1100, RG 1300
Challenger: RG 900, RG 1100, RG 1300
General:

Vehicle Version 1.10.
Network Scan and Network Summary:

Added detection of out-of-date software and added ability to jump directly to software flash section.
Calibrations:

Hydrostatic Drive Calibration 1: (RG 1300) Expanded range of allowable values on wheel motor currents.
Software:

System Module Software: Updated to version 7.0.
Headlight ECU Software: Updated to version 4.0
Chassis ECU Software: Updated to version 4.0.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 4

Vehicles Affected:

Challenger: RG600
General:

Vehicle Version 2.1.
Bug Fix C1000 software.
Software:

Mandatory:
Update software C1000 Terminal (CONS_01_01.zip). Fix issue Norac does not show up on C1000 after ground switch was switched Off/On. (Note: is only compatible with BIN_01_01.zip and CHS_01_01.zip)

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 5

Vehicles Affected:

Valtra: S232-S352
General:

Vehicle Version 3.3.
Update PVED-CL Plugin 1.9.
Update EEM4 Plugin 3.2.
Configuration:

Check letter is now calculated in VIN.
Diagnostic Trouble Code:

Fix the clear error code issue on the Terminal tractor.
Software:

Tier3: New DCU softwares.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 6

Vehicles Affected:

Challenger: MT500 D Series
Massey Ferguson: 7600 Series
General:

Vehicle Version 3.6.
Update AG150 Plugin 1.14.
Update PVED-CL Plugin 1.9.
Diagnostic Surface:

Fix the Status displaying on the ACC Diag Surface.
Configuration:

Update of linkage label code displayed.
Software:

News Sisu software Version 3 (Fix the urea injection issue).
Armrest, MultiPad and Keyboard are now flashable.
Diagnostic Trouble Code:

EXT clear stored code update.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 7

Vehicles Affected:

Challenger: MT540, MT560, MT570, MT580
Massey Ferguson: 7350, 7370, 7390, 7415
Valtra: BT150, BT170, BT190, BT210
General:

Vehicle Version 3.0.
Update PVED-CL Plugin 1.9.
Configuration:

Table Constants access has been update.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 8

Vehicles Affected:

Challenger: CH654B, SH658B
Fendt: 8370, 8400, 9470X
Massey Ferguson: 7280, 7282, 9280
Software:

DVII - Software (SD-card Terminals) version 5.20.
DVII - Software (PCMCIA-card Terminals) version 4.87.
Language files 1.55.
Steering parameters for MY2012 rear axles.
Diagnostic Surface:

EEM4 diagnostic version 3.2.
EEM3 diagnostic version 1.5.
AGCOMMAND diagnostic version 1.9.
PVED-CL Steering valve diagnostic version 1.8.
Topcon System 150 diagnostic 1.12.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 9

Vehicles Affected:

Challenger: MT600 C Series
Massey Ferguson: 8600 Series
General:

Vehicle Version 3.9.
Software:

Tier3 : New DCU softwares.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 10

Vehicles Affected:

ATS: System 150 (universal support)
General:

Updated to software version 2.09.10.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 11

Vehicles Affected:

ATS: SGR-1
General:

Fixed issue where EDT could not launch TRU.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 12

Vehicles Affected:

ATS: HiPer AG
General:

Fixed Bug with Launching Modem TPS.
Added HiPer AG Software loading procedure and software.

--------------------------------------------------------------------------------

Release Notes - 5/4/2012 (Update 0091)

EDT NOTES:

EDT Version: 1.65.12047.940

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 1

Vehicles Affected:

Challenger: 648C, 652C
Fendt: 5275C, 5275CPL, 6335C, 6335CPL
Laverda: M400, M400LC, M400LCI, M410, M400LC
Massey Ferguson: 7360, 7360PL, 7370, 7370PL
Software:

New TECU language software for Swedish and Bulgarian.
Diagnostics:

Combine diagnostics version 1.3.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 2

Vehicles Affected:

Challenger: MT600 C Series
Massey Ferguson: 8600 Series
General:

Vehicle version 3.8
Update AG150 Plugin 1.14.
Update PVED-CL Plugin 1.9.
Fix the DCC displaying version.
Configuration:

Fix the regression VIN displaying bug with the version lower than 1.7.0.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 3

Vehicles Affected:

Gleaner: S67, S77, R66, R76
General:

EEM4 Engine diagnostics updated to v3.2.
Software:

Release of cooling fan pitch controller software package 1.2.0.0 (software 50757r5) to support SmartCooling option (S-Series only).

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 4

Vehicles Affected:

Challenger: 520C, 530C, 540C, 550C, 560C
Fendt: 9390R, 9450R, 9480R
Massey Ferguson: 9520, 9530, 9540, 9550, 9560
Software:

Combine version 2.1.0.1
RWA bug fix.
Grain loss logic updated.
Diagnostics:

Engine diagnostics version 3.2.
Added diagnostic screens for Processor and Shoe.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 5

Vehicles Affected:

AGCO: RTA / DTA Series
Challenger: MT500 B / MT500 BSeries
Massey Ferguson: 6400 / 7400 / 8400 Series
General:

Vehicle version 2.2.
Update AG150 Plugin 1.14.
Update PVED-CL Plugin 1.9.
Fix the 8400 setting parameter valve issue.

--------------------------------------------------------------------------------

Release Notes - 4/26/2012 (Update 0090)

EDT NOTES:

EDT Version: 1.65.12047.940

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 1

Vehicles Affected:

ATS: SGR-1
General:

New software flash (Process launches TRU and loads SGR-1 firmware files).

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 2

Vehicles Affected:

Valtra: T-Series, N-Series, A-Series
General:

Vehicle version 2.22.
Diagnostic Surface:

Cruise page added for models with EEM3.
Small changes to Difflock, 4WD, Creeper, Hydraulics.
Software:

New EEM3 software for several models.
New EEM4 software for several models.
New tractor software packages for N3 & T3 models:
AC14.3 1.5.0.0
AC15.3 1.5.0.0
AC16.3 1.3.0.0

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 3

Vehicles Affected:

AGCO: 8100, 8200, 8300, 8500, 8700, 8800 Planters
Challenger: 8100, 8200, 8300, 8500, 8700, 8800 Planters
Massey Ferguson: 8100, 8200, 8300, 8500, 8700, 8800 Planters
White: 8100, 8200, 8300, 8500, 8700, 8800 Planters
General:

Fixes area calculation when Implement is greater than 107ft.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 4

Vehicles Affected:

Challenger: TG 8300
TerraGator: TG 7300, TG 8300, TG 8400
General:

Vehicle version 1.8.
Updated EEM4 diagnostics to recognize certain EEM4 controller revisions correctly.
Software Updates:

Updated EEM4 Software to 1.3.10: Fixed a critical issue with DTCs 4360-2 and 4363-2.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 5

Vehicles Affected:

Rogator: RG 900, RG 1100, RG 1300
Challenger: RG 900, RG 1100, RG 1300
General:

Vehicle Version 1.9.
Updated EEM4 diagnostics to recognize certain EEM4 controllers correctly.
Corrected terminology for SGR-1 GPS receiver.

--------------------------------------------------------------------------------

Release Notes - 4/20/2012 (Update 0089)

EDT NOTES:

EDT Version: 1.65.12047.940

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 1

Vehicles Affected:

Challenger: RG600
General:

Vehicle version 2.0.
Added Norac UC5 plug-in (version 1.1).
Added SGR-1 Receiver Support plug-in (version 1.2).
EEM4 plug-in updated to version 3.2.
AGCOMMAND plug-in updated to version 1.9.
PVED-CL plug-in updated to version 1.8.
Diagnostic Surface:

Group "Hydrostatic Drive"; changed surface "Field/Street Modus" (Changed condition for model year 2012 machines).
Configuration:

Added function "Resetting Limit Drive Mode" (in case the mechanical brakes have been applied extremely).
Software:

Mandatory:
Update Chassis ECU (CHS_01_01.zip) (Note: is only compatible with BIN_01_01.zip and CONS_01_01.zip).
Update Sprayer ECU (BIN_01_01.zip) (Note: is only compatible with CHS_01_01.zip and CONS_01_01.zip).
Update C1000 Terminal (CONS_01_01.zip) (Note: is only compatible with CHS_01_01.zip and BIN_01_01.zip).
Update Light ECU (Challenger 0.1.7.0.bin).
Initial software release Norac UC5 (E2UC5-UP1105.fw2).

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 2

Vehicles Affected:

Challenger: WR9770, WR9760, WR9740, WR9735, WR9725
Massey Ferguson: WR9770, WR9760, WR9740, WR9735, WR9725
Software:

Engine Software (V 1.3.10).

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 3

Vehicles Affected:

AGCO
Round Balers: 2846, 2856
Square Balers: 2140, 2150, 2160, 2170, 2190, 2846, 2856
Challenger
Round Balers: RB46C, RB56C
Square Balers: LB23B, LB24B, LB33B, LB34B, LB34BXD, LB44B, RB46C, RB56C
Fendt
Square Balers: 870, 990, 1270, 1290, 1290XD
Massey Ferguson
Round Balers: 2846, 2856
Square Balers: 2140, 2150, 2160, 2170, 2170XD, 2190, 2846, 2856
Software:

Square Baler SBM updated to version 3.00.
Enabled version 1.8.0 and disabled version 1.7.1 in the C1000 plug-in.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 4

Vehicles Affected:

Challenger: TG 8300
TerraGator: TG 7300, TG 8300, TG 8400
General:

Vehicle version 1.7.
Updated EEM4 engine diagnostics. Fixed an issue causing EDT to lock up in "Stored Codes".
Diagnostic Connections:

Transmission and Engine Diagnostic Connection:
When "Select Connection" is pressed, EDT will show a link to "VIN Setup" if it detects that the VIN has not been previously set.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 5

Vehicles Affected:

Challenger: 644
Fendt: 5220E
Laverda: M200
Massey Ferguson: 7244
Software:

EEM4: #837085076.
Diagnostics:

EEM4 diagnostic version 3.2.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 6

Vehicles Affected:

Challenger: 645C, 647C
Fendt: 5255L, 6275L
Laverda: M300, M310, AL4 Techno
Massey Ferguson: 7345S
Software:

EEM4: #837085075, #837085077, #837085078.
Diagnostics:

EEM4 diagnostic version 3.2.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 7

Vehicles Affected:

Laverda: AL4 Evolution
Software:

EEM4: #837085078.
Diagnostics:

EEM4 diagnostic version 3.2.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 8

Vehicles Affected:

Challenger: 648C, 652C
Fendt: 5275C, 5275CPL, 6335C, 6335CPL
Laverda: M400, M400LC, M400LCI, M410, M400LC
Massey Ferguson: 7360, 7360PL, 7370, 7370PL
Software:

Terminal version 1.6.11.
TECU version 110.
Combine version 0004_00006.
EEM4: #837085078, #837085079.
Diagnostics:

Initial release of combine diagnostics version 1.2.
EEM3 diagnostics version 1.5.
EEM4 diagnostics version 3.2.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 9

Vehicles Affected:

Rogator: RG 900, RG 1100, RG 1300
Challenger: RG 900, RG 1100, RG 1300
General:

Vehicle Version 1.8.
Added support for PVED-CL assisted steering system.
Diagnostic Connections:

Added a connection for third party interfaces, such as TopCon SGR-1.
Software:

Updated Armrest software to 1.0.0.120302.1100.
Updated RoGator Management Center (C1000) software to 1.7.2.120405.0823.
Added software for SISU engines with Tier 2 emissions (Lesser Regulated Countries).
Added software for TopCon X30 console in "Third Party Interfaces" connection.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 10

Vehicles Affected:

Challenger: MT500 D Series
Massey Ferguson: 7600 Series
General:

Vehicle Version 3.5.
Diagnostic Surface:

Update Power take off Diagnostic surface.
Update Braking Diagnostic surface.
Configuration:

Parameters files - language update.
Steering Valve Parameter update.
Software:

DCC3_DVT_V1_7_0.hex.
Flash a specific software is now possible.

--------------------------------------------------------------------------------

Release Notes - 4/6/2012 (Update 0088)

EDT NOTES:

EDT Version: 1.65.12047.940

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 1

Vehicles Affected:

Challenger: 520C, 530C, 540C, 550C, 560C
Fendt: 9390R, 9450R, 9480R
Massey Ferguson: 9520, 9530, 9540, 9550, 9560
Diagnostic Trouble Codes:

Fixed an issue preventing Stored DTCs from clearing.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 2

Vehicles Affected:

Challenger: MT500 D Series
Massey Ferguson: 7600 Series
General:

New Models:
MF7614-7615-7616-7618
MT515-525-535-545
Configuration:

Authorization code fixed.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 3

Vehicles Affected:

Challenger: 648C, 652C
Fendt: 5275C, 5275CPL, 6335C, 6335CPL
Laverda: M400, M400LC, M400LCI, M410, M400LC
Massey Ferguson: 7360, 7360PL, 7370, 7370PL
Software:

Terminal version 1.6.11.
TECU version 110.
Combine version 0004_00006.
EEM3 software version 1.5.0.
EEM4 software version 1.1.9.
Diagnostics:

Initial release of combine diagnostics version 1.1.
EEM3 diagnostics version 1.5.
EEM4 diagnostics version 3.2.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 4

Vehicles Affected:

ATS: HiPer AG
General:

Initial Release of HiPer AG Diagnostic Vehicle(Includes Modem TPS and TRU).

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 5

Vehicles Affected:

ATS: SGR-1
General:

Initial Release of Generic SGR-1 Support vehicle(Includes TRU).

--------------------------------------------------------------------------------

Release Notes - 3/23/2012 (Update 0087)

EDT NOTES:

EDT Version: 1.65.12047.940

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 1

Vehicles Affected:

Valtra: T-series, N-series, A-series
General:

Vehicle version v2.18.
EEM3 plug-in updated to 1.5.
EEM4 plug-in updated to 3.1.
AGCOMMAND plug-in updated to 1.9.
PVED-CC plug-in updated to 1.8.
Diagnostic Surface:

Color TT (CACHT) function and diagnostic pages for hydraulics added.
Signals of transmission lever added to CVT page.
TwinTrac signals added to PowerShuttle page.
Creeper page added.
Brake Cooling added for Versu and Direct.
Small changes to Difflock, PTO, Rear Linkage and Cruise.
Configurations:

Added Resetting of Tractor Terminal User Settings.
Tests:

HST-test added.
Software:

New EEM3 software for AC17.2 (837078762_4.hex and 837078760_4.hex).
New ISOAD parameter file 2.8.0.4 (for Versu/Direct with front-PTO).
Separate scripts for ISO adapter software and parameter flash.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 2

Vehicles Affected:

Challenger: 520C, 530C, 540C, 550C, 560C
Fendt: 9390R, 9450R, 9480R
Massey Ferguson: 9520, 9530, 9540, 9550, 9560
Software:

Combine version 2.1.0.0
Additional vehicle DTC functionality.
Added display of active and stored engine DTCs.
Added chaffer & sieve type designation to display correct opening width.
Added drag rod or cutter bar designation for AHHC sensitivity.
Added Alarm for engine compartment fan stopping.
Fixed bug for errant cooling fan reversal when temperature below 0°C/32°F.
Allow Grain Tank and unloader auger closing in transport mod.
Remove restriction for starting Class 6 threshing system only at low idle.
Added Portuguese language.
Engine software version 1.3.10.
Diagnostics:

Engine diagnostics version 3.1.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 3

Vehicles Affected:

AGCO: 8100, 8200, 8300, 8500, 8700, 8800 Planters
Challenger: 8100, 8200, 8300, 8500, 8700, 8800 Planters
Massey Ferguson: 8100, 8200, 8300, 8500, 8700, 8800 Planters
White: 8100, 8200, 8300, 8500, 8700, 8800 Planters
Software:

Added C1000 Console Software (Version 1.8.0).
Added Diagnostics and software flash for C1000 console.
Updated Planter Controller Software (Version 5.51).

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 4

Vehicles Affected:

Challenger: MT500 D Series
Massey Ferguson: 7600 Series
General:

Vehicle version 3.2.
Diagnostic Surface:

Suspended cab sensor are now in the right location.
TOC Bug fixed.
Configuration:

Authorization code bug fixed.
Software:

A5_TECU_V1_10_0.bin.
A5_LINKAGE_V1_10_0.bin.
DCC3_D6_V1_6_0.hex.
DCC3_DVT_V1_6_0.hex.
EXT-Lite_V0_1_5.bios.

--------------------------------------------------------------------------------

Release Notes - 3/14/2012 (Update 0086)

EDT NOTES:

EDT Version: 1.65.12047.940

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 1

Vehicles Affected:

Challenger: WR9770, WR9760, WR9740, WR9735, WR9725
Massey Ferguson: WR9770, WR9760, WR9740, WR9735, WR9725
General:

Updated EEM4 Plug-in (3.1).
Software:

Main Controller (1.2.2)
Updated DWA functionality.
C1000 (1.2.1)
Translations (Fr, Es, Pt, Ru).

--------------------------------------------------------------------------------

Release Notes - 3/9/2012 (Update 0085)

EDT NOTES:

EDT Version: 1.65.12047.940

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 1

Vehicles Affected:

Challenger: 520C, 530C, 540C, 550C, 560C
Fendt: 9390R, 9450R, 9480R
Massey Ferguson: 9520, 9530, 9540, 9550, 9560
General:

Software version display for ECUs in network scan (where supported by the ECU).
Restore Fendt 9390R model.
Software:

C2100 version 1.7.3.20120125
Improved compatibility of data log files for desktop software applications.
Enable GPS Bridge by default.
Improved audio alarm sound.
Audio alarm minimum level set according to regulatory requirements.
Diagnostics:

Cleaning Shoe.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 2

Vehicles Affected:

Gleaner: S67, S77, R66, R76
General:

EEM4 Engine diagnostics updated to v3.1.
Software:

C2100 version 1.7.3.20120125
Improved compatibility of data log files for desktop software applications.
Enable GPS Bridge by default.
Improved audio alarm sound.
Audio alarm minimum level set according to regulatory requirements.

--------------------------------------------------------------------------------

Release Notes - 2/24/2012 (Update 0084)

EDT NOTES:

EDT Version: 1.65.12047.940
General:

New Sontheim lower layers (MDT v1.07.0908).
Added the ability to update the license from Network Settings. When license is out of date, the user is directed to Network Settings from the home screen.
Added support for the FELLA brand.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 1

Vehicles Affected:

Valtra: A-series, N-series, T-series
General:

New AC-systems added, AC14.31, AC15.31 and AC16.31.
AC16.0 / South America: T131h removed, T151h added.
Diagnostic Surface:

Added autotraction.
Added cruise.
Transmission temperature added to Power Shuttle surfaces.
Calibrations:

Throttle calibration added AC16.0.
Tractor speed display added to Clutch Pedal Calibration.
Error codes added to Speed Sensor Calibration.
Software:

New SW AC14.3 (1.4.0.0).
New SW AC15.3 (1.4.0.0).
New SW AC16.3 (1.4.0.0).
Added EEM4 SW for T153V.
Added EEM4 SW for T153D.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 2

Vehicles Affected:

Rogator: RG 900, RG 1100, RG 1300
Challenger: RG 900, RG 1100, RG 1300
General:

Vehicle Version 1.6.
Software:

Updated System ECU software to 6.0.
Updated Armrest software to 1.0.0.120209.1600.
Updated Lighting software to 3.0.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 3

Vehicles Affected:

Challenger: 520C, 530C, 540C, 550C, 560C
Fendt: 9450R, 9480R
Massey Ferguson: 9520, 9530, 9540, 9550, 9560
General:

Software version display for ECUs in network scan (if supported).
Software:

HMM version 7859$B
Disabled open circuit diagnostic on O4 and O6.
Remove legacy software packages 2.0.0.2 and 2.0.0.4.
Software package 2.0.0.8 renamed to "Axial Combine".
Diagnostics:

Reel.
Header Control.
Dynaflex.
Header Clutch.
Vertical Knives.
Shaft Speeds.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 4

Vehicles Affected:

Challenger: MT500 D Series
Massey Ferguson: 7600 Series
General:

Vehicle version 3.0.
Diagnostic Surface:

Fix Air conditioning issue.
Configuration:

Fix Code G description in EXT label code (in German).
VIN update (fix the conflict with code A).
Software:

Dyna 6 Engine software availability bug has been fixed.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 5

Vehicles Affected:

Challenger: MT600 C Series
Massey Ferguson: 8600 Series
General:

Vehicle version 3.4.
Configuration:

VIN update (fix the conflict with code A).

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 6

Vehicles Affected:

AGCO
Round Balers: 2846, 2856
Square Balers: 2140, 2150, 2160, 2170, 2190, 2846, 2856
Challenger
Round Balers: RB46C, RB56C
Square Balers: LB23B, LB24B, LB33B, LB34B, LB34BXD, LB44B, RB46C, RB56C
Fendt
Square Balers: 870, 990, 1270, 1290, 1290XD
Massey Ferguson
Round Balers: 2846, 2856
Square Balers: 2140, 2150, 2160, 2170, 2170XD, 2190, 2846, 2856
General:

Updated round baler software to version 2.60.
Updated to C1000 plugin V1.3.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 7

Vehicles Affected:

ATS: System 150 (universal support)
General:

Added ANZ region.

--------------------------------------------------------------------------------

Release Notes - 2/10/2012 (Update 0083)

EDT NOTES:

EDT Version: 1.64.11350.804

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 1

Vehicles Affected:

Gleaner: S67, S77, R66, R76
General:

EEM4 Engine diagnostics updated to v3.0.
Repaired network scan and flash download for Smart Cooling fan option.
Software:

Tier 4i Engine Software v1.3.10
Update curve to add more low-end torque.
Enable engine diagnostic test functions for compression, run up, cylinder cut-out, and actuator tests.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 2

Vehicles Affected:

Challenger: MT500 D Series
Massey Ferguson: 7600 Series
General:

Vehicle version 2.8.
PVED-CL plugin update.
Calibration:

Finger tips calibration update.
Configuration:

Check letter is now calculated in VIN.
Software:

CCD V1.80

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 3

Vehicles Affected:

Challenger: MT600 C Series
Massey Ferguson: 8600 Series
General:

Vehicle version 3.2.
PVED-CL plugin update.
Calibration:

Finger tips calibration update.
Configuration:

VIN update in mode offline.
Light module label code writing fixed.
Software:

CCD V1.80

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 4

Vehicles Affected:

Valtra: S232-S352
General:

Vehicle version 3.2.
PVED-CL plugin update.
AGCOCOMMAND update.
C1000 plugin.
Configuration:

Check letter is now calculated in VIN.
Light module label code writing fixed.
Software:

CCD V1.80

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 5

Vehicles Affected:

AGCO: RTA / DTA Series
Challenger: MT500 B / MT500 BSeries
Massey Ferguson: 6400 / 7400 / 8400 Series
General:

Vehicle version 1.8.
PVED-CL plugin update.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 6

Vehicles Affected:

Challenger: MT540, MT560, MT570, MT580
Massey Ferguson: 7350, 7370, 7390, 7415
Valtra: BT150, BT170, BT190, BT210
General:

Vehicle version 3.2.
PVED-CL plugin update.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 7

Vehicles Affected:

TerraGator: 6303, 8303
General:

Vehicle version 2.6.
Update AGCOMMAND diagnostics (Version 1.9).
Update EEM3 engine diagnostics (Version 1.5).
General:

Update Auto4 to 0.1.6.0.
Update DCC3 to 0.45.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 8

Vehicles Affected:

Challenger: TG 8300
TerraGator: 7300, 8300, 8400
General:

Vehicle version 1.5.
Updated AGCOMMAND diagnostics (Version 1.9).
Software:

Update DCC3 software to 0.1.6.0.
Update Auto4 to 0.0.1.12.
Update Fan Control software to include options for automatic fan control or full clutch lockup operating modes.

--------------------------------------------------------------------------------

Release Notes - 1/27/2012 (Update 0082)

EDT NOTES:

EDT Version: 1.64.11350.804

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 1

Vehicles Affected:

Rogator: RG 900, RG 1100, RG 1300
Challenger: RG 900, RG 1100, RG 1300
General:

Vehicle Version 1.4.
Software:

Updated System ECU software to 5.0.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 2

Vehicles Affected:

ATS: AGCOMMAND (Universal Kit Support)
General:

AGCOMMAND Serial Number available on EDT Network Summary.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 3

Vehicles Affected:

Challenger: RG600
General:

Vehicle version 1.9.
Update Model Mapping (selection of Model and Model Year).
Added EEM4 (Tier4i) engine diagnostics (version 3.0).
Configuration:

Added Vehicle Identification Number (VIN) configuration:
Requires update of Chassis ECU (CHS_01.00).
Requires authorization code to set the VIN.
Software:

Updated software Chassis ECU (Note: after this update the VIN must be set otherwise the machine can not be operated).
Updated software Sprayer ECU (Note: only compatible with CHS_01.00 and CONS 01.00).
Updated software C1000 Terminal (Note: only compatible with CHS_01.00 and BIN_01.00).
Updated software Light ECU (fixed issue when using Xenon work lights).
Initial software release of Suspension/4Wheel Steering ECU.
Initial software release of C3000 Terminal(Optional) (Note: if AGI-3 receiver is installed, it is required to update the receiver also with the aim of the C3000).
Initial software release of Instrument Cluster (Gen2) (Note: only for model year 2012 machines).
Diagnostic Surface:

Added surface for Low Idle Mode engine (Only for Tier4i engines).
Added surface "Boom Folding Sensor" (Only for model year 2012 machines).
Added surface "Speed Limitations".

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 4

Vehicles Affected:

Challenger: MT500 D Series
Massey Ferguson: 7600 Series
General:

Vehicle version 2.6.
Updated AGCOMMAND plugin.
Gearbox Challenger choice bug has been fixed.
Diagnostic Surface:

Following surfaces have been added:
Dot Matrix.
FNR.
CAN Keyboard.
Overview PLK D6 /DVT.
Software:

New linkage V2.6.0.
New Transmission T1/T2 V3.5.0.
New DCC V1.5.0.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 5

Vehicles Affected:

Challenger: MT600 C Series
Massey Ferguson: 8600 Series
General:

Vehicle version 3.0.
Updated AGCOMMAND plugin.
Software:

DCC C1.9.1 (Tier3) -> Fix the loader shock absorber activation.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 6

Vehicles Affected:

Valtra: S232-S352
General:

Vehicle v3.0.
Updated AGCOMMAND plugin.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 7

Vehicles Affected:

AGCO: RTA / DTA Series
Challenger: MT500 B / MT500 BSeries
Massey Ferguson: 6400 / 7400 / 8400 Series
General:

Vehicle version 1.6.
Updated AGCOMMAND plugin.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 8

Vehicles Affected:

Challenger: MT540, MT560, MT570, MT580
Massey Ferguson: 7350, 7370, 7390, 7415
Valtra: BT150, BT170, BT190, BT210
General:

Vehicle version 3.0.
Updated AGCOMMAND plugin.

--------------------------------------------------------------------------------

Release Notes - 1/13/2012 (Update 0080)

EDT NOTES:

EDT Version: 1.64.11350.804

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 1

Vehicles Affected:

Challenger: WR9770 (Tier IV), WR 9760 (Tier IV), WR 9740 (Tier IV), WR9735 (Tier IV)
Massey Ferguson: WR9770 (Tier IV), WR 9760 (Tier IV), WR 9740 (Tier IV), WR9735 (Tier IV)
General:

Updated EEM4 Plug-in (3.0).

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 2

Vehicles Affected:

Challenger: MT540, MT560, MT570, MT580
Massey Ferguson: 7350, 7370, 7390, 7415
Valtra: BT150, BT170, BT190, BT210
Configuration:

DCC label code fixed.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 3

Vehicles Affected:

Challenger: 660B, 670B, 680B
Fendt: 9300R, 9350R, 9460R
Gleaner: A66, A76, A86
Laverda: ML700, ML800
Massey Ferguson: 9695, 9795, 9895
General:

Update 1.5.7 flash package to read and restore settings during software flash.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 4

Vehicles Affected:

Valtra: T-series
Software:

EEM4 SW for T203D updated.
EEM4 SW for T213V updated.
EEM4 SW for T153h added.

--------------------------------------------------------------------------------

Release Notes - 12/23/2011 (Update 0079)

EDT NOTES:

EDT Version: 1.64.11350.804

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 1

Vehicles Affected:

Laverda: AL4 Evo
General:

Initial release.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 2

Vehicles Affected:

Challenger: 644
Fendt: 5220E
Laverda: M200
Massey Ferguson: 7244
General:

Initial release.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 3

Vehicles Affected:

Challenger: 645C, 647C
Fendt: 5255L, 6275L
Laverda: M300, M310, AL4 Techno
Massey Ferguson: 7345S, 7347S
General:

Initial release.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 4

Vehicles Affected:

Challenger: 648C, 652C
Fendt: 5275C, 6335C
Laverda: M400, M410
Massey Ferguson: 7360, 7370
General:

Initial release.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 5

Vehicles Affected:

Challenger: 654, 658
Fendt: 8370, 8400, 9470X
Massey Ferguson: 7280, 7282, 9280
General:

Update EEM4 Plug-in to 3.00.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 6

Vehicles Affected:

Valtra: N-Series, T-Series
General:

Plug-ins updated:
AG150 v1.12
AGCOMMAND v1.8
EEM3 v1.4
EEM4 v3.0
PVED-CL v1.6
Software:

AC14.2 (1.21.0.0)
AC14.22 (1.4.0.0)
AC14.3 (1.3.0.0)
AC15.2 (1.17.0.0)
AC15.22 (1.4.0.0)
AC15.3 (1.3.0.0)
AC16.2 (1.1.0.0)
AC16.3 (1.1.0.0)
Diagnostic Surface:

Rear hitch added for AC18.0.
Calibrations:

Throttle calibration added AC16.0.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 7

Vehicles Affected:

Challenger: MT700 C, MT800 C, MT900 C
General:

Vehicle Version 3.9.
Software:

Fixed Issue in Instrument cluster flash that would not recognize the software file.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 8

Vehicles Affected:

AGCO
Round Balers: 2846, 2856
Square Balers: 2140, 2150, 2160, 2170, 2190, 2846, 2856
Challenger
Round Balers: RB46C, RB56C
Square Balers: LB23B, LB24B, LB33B, LB34B, LB34BXD, LB44B, RB46C, RB56C
Fendt
Square Balers: 870, 990, 1270, 1290, 1290XD
Massey Ferguson
Round Balers: 2846, 2856
Square Balers: 2140, 2150, 2160, 2170, 2170XD, 2190, 2846, 2856
General:

Added C1000 software support.
Released square baler software version 3.00.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 9

Vehicles Affected:

Challenger: MT600 C Series
Massey Ferguson: 8600 Series
General:

Diagnostic trees are available in Portuguese.
Configuration:

Spain can set max speed to 50km/k.
Software:

Dashboard V1.9.0 (for Tier3).

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 10

Vehicles Affected:

Challenger: MT500 D Series
Massey Ferguson: 7600 Series
Diagnostic Surface:

DVT surface has been updated.
Configuration:

Spain can set max speed to 50km/k.
Software:

Dashboard V1.4.0.
Autotronic5 Transmission 1/2 V3.4.0.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 11

Vehicles Affected:

Challenger: 520C, 530C, 540C, 550C, 560C
Fendt: 9450R, 9480R
Massey Ferguson: 9520, 9530, 9540, 9550, 9560
General:

EEM4 Engine plugin to v3.0
Actuator test.
Software:

Combine version 2.0.0.8
Fix for Reel Lift.
New alarm for engine compartment fan.
Fix for saving auto header height selection on terminal.
One second delay before Header Reverse from Header ON.
No engine speed limitation while engaging Thresher (models 520C, 530C, 9520, and 9530).

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 12

Vehicles Affected:

Gleaner: S67, S77, R66, R76
General:

EEM4 Engine plugin to v3.0
Actuator test.
Software:

C2100 version 1.7.1.110203
Original factory version.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 13

Vehicles Affected:

ATS: System 150 (universal support)
General:

Initial release of Universal System 150 guidance system support.
This vehicle will support systems sold through AGCO Parts, and systems which are installed on machines without a 9 pin EDT connector.
Requires service harness.

--------------------------------------------------------------------------------

Release Notes - 12/13/2011 (Update 0078)

EDT NOTES:

EDT Version: 1.64.11319.703

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 1

Vehicles Affected:

Challenger: WR9770 (Tier IV), WR 9760 (Tier IV), WR 9740 (Tier IV), WR9735 (Tier IV)
Massey Ferguson: WR9770 (Tier IV), WR 9760 (Tier IV), WR 9740 (Tier IV), WR9735 (Tier IV)
Software:

Main Controller (V1.2.1)

--------------------------------------------------------------------------------

Release Notes - 12/9/2011 (Update 0077)

EDT NOTES:

EDT Version: 1.64.11319.703
General:

New Sontheim lower layers (MDT v1.07.0781) corrects licensing issue between EDT and Fendias software.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 1

Vehicles Affected:

Challenger: MT500 D Series
Massey Ferguson: 7600 Series
General:

Vehicle version 1.8.
ECU help available in network scan.
Software:

Fix the file bug of EXT Lite.
Fix the detection bug of Auto5 T1/T2.
Diagnostic Surface:

Update CVT overview.
Configuration:

VIN compatibility with Jackson production site.
Fix the label code issue on DCC Dyna6.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 2

Vehicles Affected:

Challenger: MT600 C Series
Massey Ferguson: 8600 Series
General:

Vehicle version 2.32.
Configuration:

VIN compatibility with Jackson production site.
Software:

Fix the Light module flash downloading issue (after a crash, light module can be reflashed).

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 3

Vehicles Affected:

AGCO: RTA / DTA Series
Challenger: MT500 B / MT500 BSeries
Massey Ferguson: 6400 / 7400 / 8400 Series
General:

Vehicle version 1.2.
AGCOMMAND diagnostic available.
AG150 Topcon system and steering valve diagnostic available.
Link to Wintest available.

--------------------------------------------------------------------------------

Release Notes - 11/29/2011 (Update 0076)

EDT NOTES:

EDT Version: 1.64.11319.703

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 1

Vehicles Affected:

Challenger: WR9770 (Tier IV), WR 9760 (Tier IV), WR 9740 (Tier IV), WR9735 (Tier IV)
Massey Ferguson: WR9770 (Tier IV), WR 9760 (Tier IV), WR 9740 (Tier IV), WR9735 (Tier IV)
Software:

Main Controller (V1.2.0)
C1000 (V1.2.0)

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 2

Vehicles Affected:

TerraGator: 7300, 8300, 8400
General:

Included fault trees for the Tier 4 Engine.
Included fault trees for the Auto4 - Transmission.

--------------------------------------------------------------------------------

Release Notes - 11/25/2011 (Update 0075)

EDT NOTES:

EDT Version: 1.64.11319.703

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 1

Vehicles Affected:

Challenger: 520C, 530C, 540C, 550C, 560C
Fendt: 9450R, 9480R
Massey Ferguson: 9520, 9530, 9540, 9550, 9560
Software:

Axial Combine Pilot 2.0.0.7
New header calibration.
Revised Float (Field pressure) mode.
Max header width to task controller bug fix.
Reduced reel drop on reel up command.
1 sec delay before header reverse.
Remove engine RPM limit for Cl6 thresher engagement.
Refined thresher engagement lockout for CL7/8.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 2

Vehicles Affected:

Massey Ferguson: WR9770 (Tier IV), WR 9760 (Tier IV), WR 9740 (Tier IV), WR9735 (Tier IV)
General:

Change model names.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 3

Vehicles Affected:

Challenger: MT700 C, MT800 C, MT900 C
General:

Vehicle Version 3.8.
Updated AutoGuide System 150 diagnostics (version 1.12).
Updated AGCOMMAND diagnostics (version 1.8).
Software:

Updated Armrest software to 2.70.0.0.
Updated Lighting Module software to 3.30.0.0.
Instrument Cluster flash
Added support for 553223D1 instrument cluster, Software P/N: 561675D1.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 4

Vehicles Affected:

Rogator: RG 900, RG 1100, RG 1300
General:

Vehicle Version 1.2.
Configuration:

Applicator Configuration
Added "Max Speed Limit" parameter.
Requires TECU Armrest software update.
Software:

Updated TECU Armrest to 1.0.0.111109.0800
Requires "Application Configuration" verification after initial update.
Updated System ECU software to 4.0

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 5

Vehicles Affected:

TerraGator: 6303, 8303
General:

Vehicle version 2.4.
Update AGCOMMAND diagnostics (Version 1.8).
Update EEM3 engine diagnostics (Version 1.3).

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 6

Vehicles Affected:

TerraGator: 7300, 8300, 8400
General:

Vehicle version 1.3.
Updated AGCOMMAND diagnostics (Version 1.8).
Updated EEM4 engine diagnostics (Version 3.0).
Diagnostic Trouble Codes:

Suppressed display of erroneous Auto5-Armrest error codes.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 7

Vehicles Affected:

Challenger: MT500 D Series
Massey Ferguson: 7600 Series
General:

Update connection.
AG150 and AGCOMMAND update.
Steering valve update.
Software:

New Sisu engine software 1.1.9 v2
New DCC software V1.1.0
Calibration:

Finger tips calibration update.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 8

Vehicles Affected:

AGCO: DTb Series
Challenger: MT600 C Series
Massey Ferguson: 8600 Series
General:

Update connection.
Portuguese language is now available.
AG150 and AGCOMMAND update.
Steering valve update.
Configuration:

Fixed bug about EXT Lite label code B,F,G which were not writable.
Fixed bug about the authorization code (bad character in VIN read automatically).
Software:

Package 0.1.9.0 has been slipped (unlocked / locked package).

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 9

Vehicles Affected:

Valtra: S232-S352
General:

Update connection.
Portuguese language is now available.
AG150 and AGCOMMAND update.
Steering valve update.
Software:

New Reverse station software due to the new SKF module (back steering wheel).
Steering valve (PVED-CL) parameters have been updated.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 10

Vehicles Affected:

Challenger: MT540, MT560, MT570, MT580
Massey Ferguson: 7350, 7370, 7390, 7415
Valtra: BT150, BT170, BT190, BT210
General:

AG150 and AGCOMMAND update.
Steering valve update.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 11

Vehicles Affected:

ATS: AGCOMMAND Universal Kits (sold through AGCO parts, not on OEM installations)
General:

Initial release.
A special dealer harness is required to use this vehicle and the details can be found in the connection steps of the vehicle.
This vehicle is not intended and will not service OEM installations of AGCOMMAND. These OEM installations should be diagnosed with the specific EDT vehicle.

--------------------------------------------------------------------------------

Release Notes - 11/11/2011 (Update 0074)

EDT NOTES:

EDT Version: 1.64.11306.751
Enhancements:

Implemented a 3D border around PopupForm to increase visibility.
Updated Sontheim DataCollection to v1.07.0708 to support Norac controller flashing.
Fixes:

Fixed an issue where 1366x768 screen resolutions caused some content to be clipped.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 1

Vehicles Affected:

Challenger: 660B, 670B, 680B
Fendt: 9300R, 9350R, 9460R
Gleaner: A66, A76, A86
Laverda: ML700, ML800
Massey Ferguson: 9695, 9795, 9895
Software:

Replace 1.5.6 software package with 1.5.7
Revised Yield measurement table for improved accuracy

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 2

Vehicles Affected:

Challenger: 9735 (Tier IV), 9740 (Tier IV), 9760 (Tier IV), 9770 (Tier IV)
Massey Ferguson: 9735 (Tier IV), 9740 (Tier IV), 9760 (Tier IV), 9770 (Tier IV)
General:

Change model names.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 3

Vehicles Affected:

RoGator: 1396
General:

Vehicle Version 2.5.
Calibration:

Hydrostatic Drive Calilbration: Updated list of factory default parameters.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 4

Vehicles Affected:

Challenger: MT500D
Massey Ferguson: MF7600
General:

Vehicle Version 1.4.
Software:

New DCC V1.1
Diagnostic Surface:

Multiple bugs have been fixed in Command, Suspended cab and Front axle surface.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 5

Vehicles Affected:

Challenger: MT600 C Series
Massey Ferguson: 8600 Series
General:

Vehicle Version 2.28.
Software:

Network scan tab: software versions match to the software version in EDT.

--------------------------------------------------------------------------------

Release Notes - 10/28/2011 (Update 0073)

EDT NOTES:

EDT Version: 1.63.11293.1268
Fixes:

Fixed an issue where EDT would display the application's title bar and cause some UI elements to be hidden on certain resolutions higher than 1024 x 768.
Fixed an issue where the EDT Lite Installer would not removed obsolete content which caused some vehicles to load too many plug-ins or not to open.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 1

Vehicles Affected:

Challenger: MT500D
Massey Ferguson: MF7600
General:

Vehicle Version 1.2.
General update.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 2

Vehicles Affected:

Massey Ferguson: 8600 Series
Challenger: MT600 C Series
General:

Vehicle Version 2.26.
Software:

AG150 SW V2.08.09
PLK V2.18 pour LRT Ti3

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 3

Vehicles Affected:

Challenger: 660B, 670B, 680B
Fendt: 9300R, 9350R, 9460R
Gleaner: A66, A76, A86
Laverda: ML700, ML800
Massey Ferguson: 9695, 9795, 9895
General:

Improved 1.5.6 software package flash performance. All VMMs will go Offline while flashing a single VMM or the complete package.
Removed legacy software flash packages 1.5.0, 1.5.2, and 1.5.3.
Engine Gateway flash only appears in 1.5.6 flash package for Class 8 models.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 4

Vehicles Affected:

Valtra: A-Series, N-Series, T-Series
General:

A-series (AC17.2) and N-hitech (AC16.2) added for North America.
T-series (AC16.0) added for South America.
Software:

Twin Trac (1.0.0.4)
Diagnostic Surface:

4WD updated

--------------------------------------------------------------------------------

Release Notes - 10/14/2011 (Update 0072)

EDT NOTES:

EDT Version: 1.63.11271.746

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 1

Vehicles Affected:

Challenger: 9770, 9760, 9740, 9735, 9725
Massey Ferguson: 9770, 9760, 9740, 9735, 9725
Software:

Main Controller (V1.1.0)
C1000 (V1.1.0)
Software:

Diagnostic fault trees

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 2

Vehicles Affected:

Challenger: MT500D
Massey Ferguson: MF7600
General:

Initial Release.
Vehicle Version 1.0.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 3

Vehicles Affected:

Massey Ferguson: 8600 Series
Challenger: MT600 C Series
General:

New: Steering valve plugin V1.5.
Configuration:

Fix the CodeAA list of the Dashboard DCC3.
Software:

New DCC 2.10 (Fix the AG2 error code displaying on the DCC3).

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 4

Vehicles Affected:

Valtra: S232-S352
General:

Vehicle v2.24.
New: Steering valve plugin V1.5.
Software:

Fix the issue about suspended cab flashing.
New DCC V2.11 (Fix 12V connector and the error D193).

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 5

Vehicles Affected:

Rogator: RG 900, RG 1100, RG 1300
General:

Vehicle Version 1.1.
Software:

Updated Instrument cluster software to version 2.2.0.
Updated System ECU software to 3.0.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 6

Vehicles Affected:

RoGator: 994, 994H, 1194, 1194H
General:

Vehicle Version 2.4.
Calibration:

Added Hydrostatic Drive Calibration to select standard or severe duty split ratios for 2nd gear.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 7

Vehicles Affected:

RoGator: 1396
General:

Vehicle Version 2.4.
Calibration:

Added Hydtrostatic Drive Calibration to change wheel motor values to maintain proper speed adjustments. Requires version 1.04 Hydrostatic Control ECU software.
Software:

Hydrostatic Control ECU
Updated to version 1.04 to enable calibration.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 8

Vehicles Affected:

TerraGator: 7300, 8300, 8400
General:

Vehicle version 1.1.
Update AGCOMMAND diagnostics (Version 1.7).
Update EEM4 engine diagnostics (Version 2.1).

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 9

Vehicles Affected:

Challenger: 520C, 530C, 540C, 550C, 560C
Fendt: 9450R, 9480R
Massey Ferguson: 9520, 9530, 9540, 9550, 9560
General:

Improved Combine flash process to improve system behavior following successful reflashing.
Updated EEM4 diagnostics to v2.1.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 10

Vehicles Affected:

Valtra: A-Series, N-Series, T-Series
General:

Model selection starts directly from AC-system.
Calibration:

Steering middle position calibration added (Versu & Direct).
Software:

ISOAD_ISOBUS (1.0.2.0)
Diagnostic Surface:

Rear linkage updated
Powershuttle updated
PTO updated

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 11

Vehicles Affected:

Valtra: A83h, A93h (AC17.2)
Software:

EEM3 software updated
AC17.2 (1.1.0.0)

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 12

Vehicles Affected:

Valtra: N-Direct, T-Direct (AC14.2 & AC14.22)
Valtra: N-Versu, T-Versu (AC15.2 & AC15.22)
General:

Initial release.
Software:

AC14.2 (1.0.0.0)
AC14.22 (1.0.0.0)
AC15.2 (1.0.0.0)
AC15.22 (1.0.0.0)

--------------------------------------------------------------------------------

Release Notes - 9/30/2011 (Update 0071)

EDT NOTES:

EDT Version: 1.63.11271.746
EDT UPDATES

Added support for Windows 7 Keyboard.
Added the selection of the latest recorded CAN log by default.
Decreased the time it takes to format USB drives.
Added support for enhanced screen resolutions.
Added limited support for PDF file display in the FaultTree browser.
Changed main button behavior so unused EDT sections have buttons that are disabled.
Added a background box and borders to the SkyPlotPlus Satellite display to inprove legibility.
Fixed an issue where the Export button on Network Summary was not enabled.
Fixed an issue where the Software button was disabled when software was available in the plug-in.
Fixed an issue where the vehicle information button did not show at the correct time during vehicle selection.
Fixed an issue where the model selection description was not being displayed during vehicle selection.
Fixed an issue where the model version was not being displayed at the correct time during vehicle selection.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 1

Vehicles Affected:

Challenger: MT700 C, MT800 C, MT900 C
General:

Vehicle Version 3.7.
Renamed models to "MT 700C Series", "MT 800C Series" and "MT 900C Series" for consistency.
Updated AutoGuide System 150 diagnostics (version 1.10).
Updated AGCOMMAND diagnostics (version 1.7).
Improved network scan functionality.
Updated PVED-CL diagnostics.
Calibration:

Aux Valve Calibration:
Fixed an issue that could set an unassigned valve controller to Aux Valve #1 in isolated circumstances.
Steering Valve Spool Calibration:
Improved calibration accuracy.
Configuration:

Tractor Configuration:
Automatically determine certain configuration parameters based on the VIN.
Software:

Transmission (Main Machine Module) Flash:
Updated Transmission (Main Machine Control) software
Version 0.377.8418.0 (MT 700C, MT 800C)
Version 0.382.9703.0 (MT 900C)
Added ability to launch Caterpillar ET WinFlash directly from EDT if it is installed on the computer or save the file for transfer to another computer with Caterpillar ET installed.
Updated AutoGuide System 150 software to 2.08.09
Updated Armrest software to 2.69.0.0
Updated C1000 software to 1.7.2.20110818.1529
Lighting Module flash:
Added ability to detect and re-flash lighting modules with incorrect software part number

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 2

Vehicles Affected:

Massey Ferguson: 8600 Series
General:

Vehicle v2.22.
Software:

New EEM4 software (fix bug about error code 4360).

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 3

Vehicles Affected:

Challenger: MT600 C Series
General:

Vehicle v2.22.
Mapping issue has been fixed (bad label code in Tier3 / bad transmission controller in Tier4i CAN network).
Software:

New EEM4 software (fix bug about error code 4360).

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 4

Vehicles Affected:

Challenger: 520C, 530C, 540C, 550C, 560C
Fendt: 9450R, 9480R
Massey Ferguson: 9520, 9530, 9540, 9550, 9560
General:

Added pop-ups before and after flash to explain that the console will appear inoperable for several minutes following successful flash.
Fixed button operation for clearing stored DTCs.
Software:

Axial Combine Pilot - Dual Piston Clutch 2.0.0.6
Corrected Rotor Speed Control Issues
Added Class 2 alarm for uncommanded Sieve, Chaffer and Concave movement
Added DTC alarm for low alternator voltage

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 5

Vehicles Affected:

Gleaner: S67, S77, R66, R76
General:

EEM4 Engine diagnostics updated to v2.1.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 6

Vehicles Affected:

Challenger: 660B, 670B, 680B
Fendt: 9300R, 9350R, 9460R
Gleaner: A66, A76, A86
Laverda: ML700, ML800
Massey Ferguson: 9695, 9795, 9895
General:

Added EEM3 plug-in with Engine flash support.
Fixed button operation for clearing stored DTCs.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 7

Vehicles Affected:

Valtra: S232-S352
General:

Vehicle v2.22.
Configuration:

Change ID of Valtra controller has been added in Configuration tab.
Software:

New EEM4 software (fix bug about error code 4360).

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 8

Vehicles Affected:

Challenger: CH654B, CH658B
Fendt: 8370, 8400, 9470X
Massey Ferguson: 7280, 7282,9280
General:

Updated Topcon system diagnostics.
Updated EEM4 diagnostics.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 9

Vehicles Affected:

Rogator: RG 900, RG 1100, RG 1300
General:

Initial Release.
Vehicle Version 1.0.

--------------------------------------------------------------------------------

Release Notes - 9/2/2011 (Update 0069)

CONTENT UPDATES - Part 1

Vehicles Affected:

Challenger: 520C, 530C, 540C, 550C, 560C
Fendt: 9450R, 9480R
Massey Ferguson: 9520, 9530, 9540, 9550, 9560
General:

Added pop-up during flash to explain flash process and behavior.
Removed single piston clutch software.
Corrected dual piston clutch software release notes.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 2

Vehicles Affected:

Gleaner: S67, S77, R66, R76
General:

Changed model year selection from 2010 only to 2009 ? 2010.
Software:

Replaced C2000 1.6.9D flash package with 1.6.9E flash package bundled with CIC software v7.20.
Revised defaults for Crop Settings on S67/S77.
Added DTC code support for Smart Cooling option.
Removed flash package 1.0.0.1 for R66/R76 and restored package 1.0.0.0. For R66/R76, flash CIC v7.20 through C2000 package 1.6.9E.
Smart Cooling Software version 50757R2.
compatible with reversible-only fan installations.
EEM3 Engine flash v2.5.0.0

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 3

Vehicles Affected:

AGCO: DTb Series
Challenger: MT600 C Series
Massey Ferguson: 8600 Series
General:

Vehicle v2.20.
Topcon plugin update.
Steering valve plugin update.
Mapping update.
Vehicle help available on each tab.
Displaying condition of the bad vehicle selected has been modified.
ECU Help available by clicking on the controller and information button.
Software:

T2 engine software has been added.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 4

Vehicles Affected:

Valtra: S232-S352
General:

Vehicle v2.20.
Topcon plugin update.
Steering valve plugin update.
Mapping update.
EEM4 plugin update.
Vehicle help available on each tab.
Displaying condition of the bad vehicle selected has been modified.
ECU Help available by clicking on the controller and information button.
Configuration:

Authorization code for changing speed limit has been removed
Software:

T2 engine software has been added.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 5

Vehicles Affected:

Challenger: MT540, MT560, MT570, MT580
Massey Ferguson: 7350, 7370, 7390, 7415
Valtra: BT150, BT170, BT190, BT210
General:

Vehicle v2.20.
Topcon plugin update.
Steering valve plugin update.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 6

Vehicles Affected:

Valtra: A83h, A93h (AC17.2)
General:

EEM3 plugin v 1.2
Calibration:

Powershuttle adjustments added.
Diagnostic Surface:

Rear linkage surface fixed.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 7

Vehicles Affected:

Valtra: N82h, N92h (AC18.0)
Calibration:

Powershuttle adjustments added.
Powershift adjustments added.
Diagnostic Surface:

Rear linkage surface fixed.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 8

Vehicles Affected:

Valtra: T131h, T171h (AC16.0)
General:

Initial release of T131h and T171h, tier 0 (AC16.0).
Software:

AC16.0 (1.0.0.6)

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 9

Vehicles Affected:

Valtra: N101hCR, N111ehCR, N121h, N141h (AC16.2)
Valtra: T121h, T131h, T151eH, T161h, T191h (AC16.2)
General:

EEM3 plugin v 1.2
Calibration:

Powershuttle adjustments added.
Powershift adjustments added.
Diagnostic Surface:

Rear linkage surface fixed.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 10

Vehicles Affected:

Valtra: T183D, T203D (AC14.3)
Valtra: T183V, T213V (AC15.3)
Configuration:

CAN-ID change for auxiliary valves added
Calibration:

Speed sensor calibration added.
Powershuttle adjustments added.
Powershift adjustments added.
Diagnostic Surface:

Rear linkage surface fixed.

--------------------------------------------------------------------------------

Release Notes - 8/19/2011 (Update 0068)

CONTENT UPDATES - Part 1

Vehicles Affected:

Challenger: 520C, 530C, 540C, 550C, 560C
Fendt: 9450R, 9480R
Massey Ferguson: 9520, 9530, 9540, 9550, 9560
General:

System-150 software update v2.08.09.
Software update 2.0.0.3 for single piston clutch units.
Software update 2.0.0.4 for dual piston clutch units:
Fix for rotor speed maxing out.
Improved grain loss monitoring.
Fix for momentary Reel drop with Reel-Up switch.
Auto header mode "Engaged" indication by change in header mode icon back ground color to yellow.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 2

Vehicles Affected:

Challenger: 660B, 670B, 680B
Fendt: 9300R, 9350R, 9460R
Gleaner: A66, A76, A86
Laverda: ML700, ML800
Massey Ferguson: 9695, 9795, 9895
Software:

System 150 (v2.08.09)

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 3

Vehicles Affected:

Gleaner: S67, S77, R66, R76
General:

Added ISOBUS Network scan for S67/S77.
Disable Engine software flash v2.5.4 for R66/R76.
Support for Smart Cooling option.
Native ISOBUS flash support for CIC on S67/S77.
Software:

CIC v7.20
Revised defaults for Crop Settings on S67/S77.
Added DTC code support for Smart Cooling option.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 4

Vehicles Affected:

Valtra: BH145, BH165, BH180, BH185i, BH205
General:

Fixed Invalid PVED-CL Steering controller parameter.
Changed Model Selection.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 5

Vehicles Affected:

AGCO: DTb Series
Challenger: MT600 C Series
Massey Ferguson: 8600 Series
Diagnostic Surface:

Tier 4i: Added SCR Process Page.
Tier 4i: Updates to Engine Status Surface.
Tier 4i: Separated Digital Inputs to different Graphical Surface.
Tier 4i: Added Software Log information to General Info.
Configuration:

Tier 4i: Added Engine Service.
Tier 4i: Added Engine Controller Activation from file.
Tier 4i: Added Engine Controller Deactivation.
Diagnostic Trouble Code:

Tier 4i: Added Error Log support.
Tier 4i: Added Emission Log support.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 6

Vehicles Affected:

Massey Ferguson: WR9770
General:

Additional diagnostics for Tier 4i engine support.
Software:

System 150 (v2.08.09)

--------------------------------------------------------------------------------

Release Notes - 7/29/2011 (Update 0067)

EDT UPDATES

Added a new 'Test' section, similar to the existing 'Calibration' and 'Configuration' sections.
Fixed an issue where reloading a vehicle multiple times during an EDT session caused the application to exit unexpectedly.
Fixed an issue where the DTC grid was sometimes not clearing the display of errors when switching between active and stored codes.
Fixed an issue where EDT Lite was no longer recognizing the 2 Channel CAN USB.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 1

Vehicles Affected:

Challenger: TerraGator 8333
General:

Initial release.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 2

Vehicles Affected:

Challenger: RG600
General:

Update Content.
Configuration:

Added "Axle width for fixed axles."
Added images of options.
Software:

Update ECU Chassis software (Beta 01.08)
Update guidance software (version 2.08.09)
Diagnostic Surface:

Added Steering sensors/Height sensors adjustment information.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 3

Vehicles Affected:

Gleaner: R66, R76
General:

System-150 software update v2.07.05 with improved display brightness/contrast control.
Connections:

Diagnostic Connection - Combine.
Topcon System 150 Diagnostics.
PVED-CL Steering Valve Diagnostics.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 4

Vehicles Affected:

Challenger: 660B, 670B, 680B
Fendt: 9300R, 9350R, 9460R
Gleaner: A66, A76, A86
Laverda: ML700, ML800
Massey Ferguson: 9695, 9795, 9895
General:

System-150 software update v2.07.05 with improved display brightness/contrast control.
Added ML700 model.
Added Fendt and Challenger models to Australia/New Zealand/Japan region.
Connections:

Topcon System 150 Diagnostics.
PVED-CL Steering Valve Diagnostics.
Software:

Axial Combine 1.5.6.0
System 150 (v2.07.05)
PVED-CL v35

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 5

Vehicles Affected:

Gleaner: S67, S77
General:

System-150 software update v2.07.05 with improved display brightness/contrast control.
Connections:

Diagnostic Connection - Combine.
Topcon System 150 Diagnostics.
PVED-CL Steering Valve Diagnostics.
Diagnostic Trouble Code:

Engine

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 6

Vehicles Affected:

Valtra: A83h, A93h (AC17.2)
Software:

AC17.2 (1.1.0.0)

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 7

Vehicles Affected:

Valtra: T183D, T203D (AC14.3)
Calibration:

Robot calibrations (main gear and range gear)
Calibration of hydrostatic unit
Configurations:

Hydraulic configuration
Software:

AC14.3 (1.1.0.0)

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 8

Vehicles Affected:

Valtra: T183V, T213V (AC15.3)
Calibration:

Robot calibrations (main gear and range gear)
Configurations:

Hydraulic configuration
Software:

AC15.3 (1.1.0.0)

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 9

Vehicles Affected:

Valtra: T121h, T161h (AC16.2)
Software:

Engine

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 10

Vehicles Affected:

Massey Ferguson: MF3600 Series
General:

Diagnostic by function added.
Connections:

VSF models added
New model added
Electronic linkage support added
Tier3 engine support for new models

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 11

Vehicles Affected:

Challenger: MT300 B Series
General:

Diagnostic by function added.

--------------------------------------------------------------------------------

Release Notes - 7/1/2011 (Update 0065)

CONTENT UPDATES - Part 1

Vehicles Affected:

Massey Ferguson: 7350, 7370, 7390, 7415
Configuration:

"Clean up an Auto5" has been updated (Boot and Hardware version are now readable in the grid and virgin application has been updated).
Software:

Bug in Auto5 flashing process has been fixed.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 2

Vehicles Affected:

AGCO: STxxA Quadra Series
Challenger: MT 200 B Series Auto Power IV
Massey Ferguson: 1500 Series Dyna Q, 1600 Series Dyna Q
General:

Initial Release.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 3

Vehicles Affected:

Challenger: 660B, 670B, 680B
Fendt: 9300, 9350, 9460
Gleaner: A66, A76, A86
Gleaner: R66, R76
Laverda: ML700, ML800
Massey Ferguson: 9695, 9795, 9895
General:

Fixed bug relating to PVED-CL steering valve parameters.

Note - Update PVED-CL Steering valve parameters to increase System 150 steering performance.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 4

Vehicles Affected:

Challenger: 520C, 530C, 540C, 550C, 560C
Fendt: 9450R, 9480R
Massey Ferguson: 9520, 9530, 9540, 9550, 9560
General:

Resolved issue with PVED-CL diagnostic network scan.
Resolved issue with configuration of Power Fold Bin Extension.
Added flash packages for European Combines.
Added flash package for Tier IVi Engine.
Connections:

Diagnostic Connection - Combine
Topcon System 150 Diagnostics
PVED-CL Steering Valve Diagnostics
Software:

Axial Combine Pilot - U.S. & Canada (v2.0.0.1)
Axial Combine Pilot - European (v2.0.0.2)
System 150 (v2.07.05)
PVED-CL v35
Tier IVi Engine
Diagnostic Trouble Code:

Combine
Engine

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 5

Vehicles Affected:

Valtra: A83h, A93h (AC17.2)
New Diagnostic Surfaces:

Rear Hitch
PTO
Engine

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 6

Vehicles Affected:

Valtra: N82h, N92h
Connection:

New connection images and instructions.
New Diagnostic Surfaces:

Rear Hitch
PTO
Engine
Software:

AC18.0 (1.0.0.6)
TwinTrac (1.0.0.3)

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 7

Vehicles Affected:

Valtra: N101hCR, N111ehCR, N121h, N141h (AC16.2)
Connection:

New connection images and instructions.
New Diagnostic Surfaces:

Rear Hitch
PTO
Engine
Software:

AC16.2 (1.0.0.4)
TwinTrac (1.0.0.3)

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 8

Vehicles Affected:

Valtra: T121h, T131h, T151eH, T161h, T171h, T191h (AC16.2)
General:

Topcon System 150 Auto-Steering support added.
Connection:

New connection images and instructions.
New Diagnostic Surfaces:

Rear Hitch
PTO
Engine
Software:

AC16.2 (1.0.0.4)
TwinTrac (1.0.0.3)

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 9

Vehicles Affected:

Valtra: T183D, T203D (AC14.3)
General:

Initial release.
Software:

AC14.3 (1.0.0.2)
TwinTrac (1.0.0.3)

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 10

Vehicles Affected:

Valtra: T183V, T213V (AC15.3)
General:

Initial release.
Software:

AC15.3 (1.0.0.2)
TwinTrac (1.0.0.3)

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 11

Vehicles Affected:

Valtra: T151eH, T161H, T171H, T191H (AC10.2)
General:

EH Steering Valve support.
OSPE Steering Valve support.
Topcon System 150 Auto-Steering support.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 12

Vehicles Affected:

Valtra: T151eLS, T161LS, T171LS, T191LS (AC11.2)
General:

EH Steering Valve support.
Topcon System 150 Auto-Steering support.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 13

Vehicles Affected:

Massey Ferguson: 7140, 7150, 7170, 7180
General:

Initial release for AGCOMMAND, System 150, and PVED-CL steering valve diagnostics only.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 14

Vehicles Affected:

Valtra: BH145, BH165, BH180, BH185i, BH205
General:

Initial release for AGCOMMAND, System 150, and PVED-CL steering valve diagnostics only.

--------------------------------------------------------------------------------

Release Notes - 6/22/2011 (Update 0064)

EDT UPDATES

Fixed an issue where EDT Lite was not recognizing the 2 Channel CAN USB.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 1

Vehicles Affected:

RoGator: 994, 994H, 1194, 1194H, 1396
General:

Vehicle Version 2.3
Added diagnostics for Auto-Guide ready and Auto-Guide System 150 equipped machines.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 2

Vehicles Affected:

Challenger: 520C, 530C, 540C, 550C, 560C
Fendt: 9450R, 9480R
Massey Ferguson: 9520, 9530, 9540, 9550, 9560
Connection:

Diagnostic Connection - Combine
Topcon System 150 Diagnostics
PVED-CL Steering Valve Diagnostics
Software:

Axial Combine Pilot - U.S. & Canada (v2.0.0.1)
System 150 (v2.07.05)
PVED-CL v35
Diagnostic Trouble Code:

Combine
Engine

--------------------------------------------------------------------------------

Release Notes - 6/13/2011 (Update 0063)

CONTENT UPDATES - Part 1

Vehicles Affected:

Challenger: RG600
General:

Added Telemetry (AGCOMMAND) Diagnostics.
Software Flash:

TopCon GX-45 Terminal (v2.08.05) Fixed pressure drop at start up with automatic section control.
ECU Sprayer (Beta 01.07) Disable possibility recirculation mode.
C1000 Terminal (Beta 01.05) Disable possibility recirculation mode.
Calibration:

All calibrations are now located at the calibration menu.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 2

Vehicles Affected:

Valtra: S232, S352
Configuration:

New: Parameter update of the steering valve.
Flashing:

New: Steering valve V38.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 3

Vehicles Affected:

AGCO: DTb Series
Challenger: MT600 C Series
Massey Ferguson: 8600 Series
Configuration:

New: Parameter update of the steering valve.
Flashing:

New: Steering valve V38.
New: Terminal software (CCD) V1.60.

--------------------------------------------------------------------------------

Release Notes - 6/10/2011 (Update 0062)

CONTENT UPDATES - Part 1

Vehicles Affected:

TerraGator: 7300, 8300, 8400
General:

Initial Release.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 2

Vehicles Affected:

Challenger: CH654B, CH658B
Fendt: 8370, 8400, 9470X
Massey Ferguson: 7280, 7282, 9280
General:

Initial Release.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 3

Vehicles Affected:

Massey Ferguson: MF9030
Valtra: BS3020H
General:

Initial Release.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 4

Vehicles Affected:

TerraGator: 6303, 8303
General:

Vehicle version 2.3.
Verify VIN when loading the diagnostic connection.
Diagnostic Trouble Codes:

Suppressed error notifications when CANUSB is not connected while viewing DTC screens.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 5

Vehicles Affected:

AGCO: DTb Series
Challenger: MT600 C Series
Massey Ferguson: 8600 Series
Connection:

New model mapping.
Configuration:

All label codes can now be exported.
Guidance antenna setting is now available in AG150 configuration.
50 kph access in DCC and transmission controllers label codes is now available.
Changed the timeout parameter from 1000 to 5000 in the steering valve.
Software:

Automatic detection is always activated even if the package is locked but the list of choice is not clickable.
Auto5 PLK V2.17.0.
Autodetection has been implemented to the locked package.
Diagnostic Surface:

Hydraulic direction 4 was not attributed to a CAN signal.
Diagnostic Trouble Code:

Filter code of EXT-Lite.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 6

Vehicles Affected:

Valtra: S232, S352
General:

Vehicle V2.16
Connection:

New model mapping.
Suspended cab detection issue has been fixed.
Configuration:

All label codes can now be exported.
Internal error in Table constant has been fixed.
Authorization code is now required to get the advances function : Speed limit, Decrease DCC hour, Change value in the table constant.
Changed the timeout parameter from 1000 to 5000 in the steering valve.
Software:

Package 1.5.0 has been split to one locked and another one unlocked.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 7

Vehicles Affected:

Challenger: MT540, MT560, MT570, MT580
Massey Ferguson: 7350, 7370, 7390, 7415
Valtra: BT150, BT170, BT190, BT210
Configuration:

Changed the timeout parameter from 1000 to 5000 in the steering valve.

--------------------------------------------------------------------------------

Release Notes - 5/9/2011 (Update 0060)

EDT UPDATES

Updated Sontheim DataCollection to v1.07.0601.
Added warning popup when trying to run the application from within EDT that doesn't exist.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 1

Vehicles Affected:

Fendt: Tractors supported by Fendias
General:

Initial release of EDT/Fendias integration.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 2

Vehicles Affected:

Massey Ferguson: 9770
General:

Initial release of 9770 Windrower.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 3

Vehicles Affected:

Gleaner: R66, R76
General:

Additional model visibility for several regions.

--------------------------------------------------------------------------------

Release Notes - 4/21/2011 (Update 0059)

CONTENT UPDATES - Part 1

Vehicles Affected:

Valtra: A83h/A93h
General:

Support for AC16.2 and AC18.0 added.
Calibrations:

Improved version of multidisc clutch calibration.
Added Clutch pedal calibration.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 2

Vehicles Affected:

Challenger: RG600
Configuration:

Added option 50 km/h for Model RG655 (Authorization Code required).
Diagnostic Trouble Codes:

Fixed function "Clear Stored Codes" of Engine ECU.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 3

Vehicles Affected:

TerraGator: 6303, 8303
Graphical Diagnostics:

Fixed an issue with Engine diagnostics surface display.
Configuration:

Updated "Vehicle Configuration".
Updated "Set Product Identification Number" configuration to "VIN Setup".
Software Flash:

Fixed an issue for large tire machines in the Auto4 software flash.
Diagnostic Trouble Codes:

Updated display of error codes.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 4

Vehicles Affected:

Challenger: 660B-670B-680B
Fendt: 9300-9350-9460
Gleaner: A66-A76-A86
Gleaner: R66, R76
Laverda: ML700-ML800
Massey Ferguson: 9695-9795-9895
General:

Add A66 and A76 visibility for Australia / New Zealand.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 5

Vehicles Affected:

Gleaner: S67, S77 Transverse Combine
Software Flash:

Replaced separate C2000 v1.6.9C (CIC v7.00) and CIC v7.10 packages with C2000 v1.6.9D (CIC 7.10) bundled software package.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 6

Vehicles Affected:

Valtra: S232, S352
General:

Vehicle V2.16
Connection:

ISO connection has been defined where AGCOMMAND controller is accessible.
New steering valve parameters.
Configuration:

Label code and Table constant displaying is now compatible with the Software version in mode offline.
Software:

Valtra ISO terminal (CCD) software is now available on ISO Connection.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 7

Vehicles Affected:

AGCO: DTb Series
Challenger: MT600 C Series
Massey Ferguson: 8600 Series
General:

Vehicle V2.16
Configuration:

Label code and Table constant displaying is now compatible with the Software version in mode offline.
Software:

Update process issue after Auto5 flashing have been fixed.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 8

Vehicles Affected:

Challenger: MT540, MT560, MT570, MT580
Massey Ferguson: 7350, 7370, 7390, 7415
Valtra: BT150, BT170, BT190, BT210
General:

Vehicle V2.16
Diagnostic Trouble Codes:

Active code is now available.

--------------------------------------------------------------------------------

Release Notes - 4/12/2011 (Update 0058)

CONTENT UPDATES - Part 1

Vehicles Affected:

Valtra: A83h/A93h
General:

Initial Release

--------------------------------------------------------------------------------

Release Notes - 4/4/2011 (Update 0057)

CONTENT UPDATES - Part 1

Vehicles Affected:

AGCO: DTb Series
Challenger: MT600 C Series
Massey Ferguson: 8600 Series
Valtra: S232, S352
General:

Vehicle V2.14
Configuration:

Default parameters 729, 737, 738, 747 have been added to the steering valve.
New EXT Lite parameter file.
VIN writing is now possible with A5-Armrest V1.7.0.
Software:

Auto5 Armrest V0.1.7.0.
(T4i Only) EXT-Lite V0.0.1.3.
(T3 Only) Message at the end of the flash package 1.8.0 execution has been updated to force the user to reapply A5-Armrest (ISO for Valtra) and A5-Linkage label codes.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 2

Vehicles Affected:

Challenger: 660B-670B-680B
Fendt: 9300-9350-9460
Gleaner: A66-A76-A86
Gleaner: R66, R76
Laverda: ML700-ML800
Massey Ferguson: 9695-9795-9895
General:

Additional model visibility for several regions.
Added model 9300R.
Software:

Axial software bundle 1.5.6
Yield Sensor lookup table for improved accuracy with longer sensor arm.
Numeric display of Header Height.
Support for both 100 cc and 130 cc ground drive hydrostatic motors.
Improved grain bin cover tether control.
Corrected tail light and license plate light control (CE Models)

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 3

Vehicles Affected:

Gleaner: R66, R76
General:

Additional model visibility for several regions.

--------------------------------------------------------------------------------

Release Notes - 3/25/2011 (Update 0056)

EDT UPDATES

Updated the Brand images in EDT.
Updated the Carraro Agricultural Service Transmissions Tool (CaST) application for Agritalia vehicles.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 1

Vehicles Affected:

Challenger: MT700 C Series, MT800 C Series
General:

Fixed potential integrity issue with Aux Valve calibration.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 2

Vehicles Affected:

Challenger: MT900 C Series
General:

Moved diagnostic content for PVED-CL / SASA to the Cab Diagnostic Connection.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 3

Vehicles Affected:

RoGator: 994, 994H, 1194, 1194H, 1396
General:

Updated Plug-in Content.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 4

Vehicles Affected:

Challenger: RG600
General:

Added model RG635.
Software:

Software update of Chassis ECU and Sprayer ECU.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 5

Vehicles Affected:

Challenger: MT540, MT560, MT570, MT580
Massey Ferguson: 7350, 7370, 7390, 7415
Valtra: BT150, BT170, BT190, BT210
General:

Vehicle V2.12
Connections:

AG150 connection step updated.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 6

Vehicles Affected:

AGCO: DTb Series
Challenger: MT600 C Series
Massey Ferguson: 8600 Series
Valtra: S232, S352
General:

Vehicle V2.12
Connections:

AG150 connection step updated.
New steering valve parameters.
Software:

Auto5 ISO V1.7.0 has been replaced by V1.6.0 due to a VIN bug. No functional impact on tractor.

--------------------------------------------------------------------------------

Release Notes - 3/22/2011 (Update 0055)

EDT UPDATES

Fixed an issue where EDT was losing the voucher code on Windows 7 64-bit installations.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 1

Vehicles Affected:

Challenger: MT700 C Series, MT800 C Series, MT900 C Series
General:

Fixed issue when installing a new steerable hitch or aux valve module that did not allow correct calibration or software update.
Removed irrelevant year selections.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 2

Vehicles Affected:

Challenger: MT540, MT560, MT570, MT580
Massey Ferguson: 7350, 7370, 7390, 7415
Valtra: BT150, BT170, BT190, BT210
General:

Vehicle: V2.10.
Software:

Auto5 flashing issue fixed.
Diagnostic Trouble Codes:

Added two new DCC error codes:
D123 - Engine oil pressure signal too high
D124 - Engine oil pressure signal too low

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 4

Vehicles Affected:

AGCO: DTb Series
Challenger: MT600 C Series
Massey Ferguson: 8600 Series
General:

Vehicle V2.10
Connections:

AGCOMAND diagnostic has been moved into the first tractor connection.
Calibrations:

Fixed the help button link.
Configurations:

Fixed the reading & writing steering valve parameters in Tier3.
Fixed the help button link.
Diagnostic Surfaces:

Empty window in Light and Air conditioning has been fixed.
Software:

Auto5 flashing issue fixed.
No choice window for CCD V1.40.
Extraction failed message in Valve package have been removed.
Armrest software V1.7.0.
Diagnostic Trouble Code:

Broken internal link in Diagnostic tree index file has been fixed.
Valves ID displaying.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 5

Vehicles Affected:

Valtra: S232, S352
General:

Vehicle V2.10
Network Scan:

Active suspended cab detection fixed.
Calibrations:

Fixed the help button link.
Configurations:

Fixed the reading & writing steering valve parameters in Tier3.
Fixed the help button link.
Software:

Auto5 flashing issue fixed.
Extraction failed message in Valve package have been removed.
ISO software V1.7.0.
Diagnostic Trouble Code:

Broken internal link in Diagnostic tree index file has been fixed.
Valves ID displaying.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 6

Vehicles Affected:

Challenger: 660B-670B-680B
Fendt: 9300-9350-9460
Gleaner: A66-A76-A86
Gleaner: R66, R76
Laverda: ML700-ML800
Massey Ferguson: 9695-9795-9895
Software:

Added VMM2 and VMM3 BB flash to 1.5.4.1 package.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 7

Vehicles Affected:

Gleaner: R66, R76
General:

Changed sub-category for both models from Conventional to Rotary.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 8

Vehicles Affected:

RoGator: 994, 994H, 1194, 1194H, 1396
General:

Added diagnostics for AutoGuide System 150.

--------------------------------------------------------------------------------

Release Notes - 3/9/2011 (Update 0054)

EDT UPDATES

Fixed an issue where a warning shows when there are no functions and the SD add-on is enabled.
Removed the MessageBox for "No Functions" and placed the text in the panel instead.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 1

Vehicles Affected:

Challenger: MT700 C Series, MT800 C Series, MT900 C Series
General:

Minor compatibility updates.
Improved function of the network scan to display software and hardware information in network summary tab.
Enhanced selection of options to show applicable functions, ECUs and software files.
Software Updates:

Updated armrest software to version 2.60.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 2

Vehicles Affected:

RoGator: 2007-2010 Airmax 180, Liquid, Spinner Aux bus
TerraGator: 2004-2010 Airmax, AirSpread/Twin Bin/4-Bin, Liquid, Spinner
General:

Enhanced selection of system types to show applicable ECUs in the network scan.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 3

Vehicles Affected:

Challenger: RG600
General:

new Diagnostic Trouble Code display.
Added languages for French/German/Dutch/Danish.
Added model mapping support.
Added System 151 plug-in (includes TopCon Software + profiles for Autosteer and Sprayer Control).
Software:

Added pre-installation Software for blank (new) C1000 terminal.
Software update for ECU Chassis and ECU Sprayer.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 4

Vehicles Affected:

AGCO: DTb Series
Challenger: MT600 C Series
Massey Ferguson: 8600 Series
General:

Valves update:
Change ID
Read parameter
Write parameter
Check Status
Check mode

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 5

Vehicles Affected:

Valtra: S232, S352
General:

Valves update:
Change ID
Read parameter
Write parameter
Check Status
Check mode
Software:

Fixed DCU flashing issue: not possible to flash DCU due to an internal error.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 6

Vehicles Affected:

Gleaner: S67, S77, Transverse Combine
General:

Updated System 150 diagnostics.
Software:

Additional Tier 4i Engine diagnostics.
SISU Engine Software v1.1.9.
Added CIC v7.10 software with added diagnostics for Engine software v1.1.9.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 7

Vehicles Affected:

Challenger: 660B-670B-680B
Fendt: 9300-9350-9460
Gleaner: A66-A76-A86
Gleaner: R66, R76
Laverda: ML700-ML800
Massey Ferguson: 9695-9795-9895
General:

Updated System 150 diagnostics.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 8

Vehicles Affected:

AGCO
Legacy Steering SubSystem Support
Round Balers: 2846, 2856
Square Balers: 2140, 2150, 2160, 2170, 2190
ATS
Legacy Steering SubSystem Support
Challenger
8100, 8200, 8300, 8500, 8700, 8800 Planters
Legacy Steering SubSystem Support
MT300B
MT500
Round Balers: RB46C, RB56C
Square Balers: LB23B, LB24B, LB33B, LB34B, LB44B
Fendt
Square Balers: 870, 990, 1270, 1290, 12130
Gleaner
Legacy Steering SubSystem Support
Massey Ferguson
3625-3635-3645
7350,7370,7390,7415
8100, 8200, 8300, 8500, 8700, 8800 Planters
Legacy Steering SubSystem Support
Round Balers: 2846, 2856
Square Balers: 2140, 2150, 2160, 2170, 2190
RoGator
994, 994H, 1194, 1194H
1396
SpraCoupe
7000 Series
TerraGator
6303, 8303
White
8100, 8200, 8300, 8500, 8700, 8800 Planters
Valtra
BT150, BT170, BT190, BT210
General:

Minor compatibility updates.

--------------------------------------------------------------------------------

Release Notes - 2/21/2011 (Update 0053)

EDT UPDATES

Updated EDTWinEEM3s to v1.2.1.1.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 1

Vehicles Affected:

AGCO: DTb Series
Challenger: MT600 C Series
Massey Ferguson: 8600 Series
Calibrations:

Corrected an issue with PVED steering valve parameters.
Configurations:

Corrected an issue with PVED steering valve parameters.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 2

Vehicles Affected:

Challenger: RG600
Fault Trees:

Fixed an inconsistency with non-english fault tree vehicle indexes.

--------------------------------------------------------------------------------

Release Notes - 2/14/2011 (Update 0052)

EDT UPDATES

Updated Sontheim DataCollection to v1.07.0506.
Regional selection has been implemented to filter out vehicles by the regions they are sold in.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 1

Vehicles Affected:

Challenger: RG600
General:

Initial EDT release.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 2

Vehicles Affected:

Square Balers:
AGCO: 2140, 2150, 2160, 2170, 2190
Challenger: LB23B, LB24B, LB33B, LB34B, LB44B
Fendt: 870, 990, 1270, 1290, 12130
Massey Ferguson: 2140, 2150, 2160, 2170, 2190
Round Balers:
AGCO: 2846, 2856
Challenger: RB46C, RB56C
Massey Ferguson: 2846, 2856
General:

Initial EDT release.
Software:

Added the ability to flash the baler software.
Configurations:

Added the ability to set the VIN for model year 2010 and above balers.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 3

Vehicles Affected:

Challenger: MT700 C Series, MT800 C Series, MT900 C Series
System 150:

Clarified connection steps.
Calibrations:

Enhanced functionality of Steerable Hitch calibration.
Enhanced functionality of Aux Valve calibration.
Configurations:

Added validation of VIN security code to improve accuracy of stored VIN.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 4

Vehicles Affected:

TerraGator: 6303, 8303
General:

Minor compatibility changes.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 5

Vehicles Affected:

AGCO: DTb Series
Challenger: MT600 C Series
Massey Ferguson: 8600 Series
General:

Vehicle version 2.4.
Added AGCOMAND diagnostic connection.
Calibrations:

Steering valve calibration has to be started through the System 150 appropriated connection.
Configurations:

Offline mode is now available in all configurations.
Steering valve configuration has to be started through the System 150 appropriated connection.
Software:

Auto detection update is now available using package flashing.
DCU module can be flashed through WinEEM3 (V19).
A5-Armrest software V0.1.6.0.
A5-Linkage software V0.2.3.0.
A5-Parlock software V0.2.15.0.
DCC software V0.1.8.0.
Light Module V0.1.7.0.
A5-Suspended cab software V0.1.4.0.
Spool Valve software V2.90.
Compatibility with old CCD.
Diagnostic Trouble Code:

Error report can be generated on the desktop.
Auto4 error list has been updated.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 6

Vehicles Affected:

Valtra: S232, S352
General:

Vehicle version 2.6.
Added AGCOMAND diagnostic connection.
Calibrations:

Steering valve calibration has to be started through the System 150 appropriated connection.
Configurations:

Offline mode is now available in all configurations.
Steering valve configuration has to be started through the System 150 appropriated connection.
Software:

DCU module can be flashed through WinEEM3 (V19).
A5-Armrest software V0.1.7.0.
A5-Twin Trac software V2.3.0.0.
A5-ISO software V0.1.6.0.
A5-Linkage software V0.2.3.0.
Spool Valve software V2.90.
Diagnostic Trouble Code:

Auto4 error list has been updated.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 7

Vehicles Affected:

Challenger: MT540, MT560, MT570, MT580
Massey Ferguson: 7350, 7370, 7390, 7415
Valtra: BT150, BT170, BT190, BT210
General:

Switch picture update for System 150.
Software:

Auto detection update is now available using package flashing.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 8

Vehicles Affected:

Gleaner: S67, S77, Transverse Combine
General:

Initial EDT release.

--------------------------------------------------------------------------------

Release Notes - 12/23/2010 (Update 0049)

EDT UPDATES

Fixed an issue where EDT would not load the Gleaner Tranverse Combine R66& R76 content.

--------------------------------------------------------------------------------

Release Notes - 11/24/2010 (Update 0048)

CONTENT UPDATES - Part 1

Vehicles Affected:

Challenger: MT700 C Series, MT800 C Series, MT900 C Series
General:

Vehicle version 2.8.
Integrated AGCOMMAND content.
Integrated TopCon System 150 content.
Software:

Updated Lighting Modules.
Updated Armrest Controller.
Updated C1000 Terminal.
Updated Transmission (MT700C and MT800C only).

--------------------------------------------------------------------------------

Release Notes - 9/30/2010 (Update 0046)

EDT UPDATES

Updated Sontheim DataCollection to v1.07.0401 to fix an installer conflict with Canon software.
Added a feature that if the IOGear Serial to USB adapter is present, EDT will not require a COM port selection.
Fixed an issue where the 'Start' button during the flash process showed up as enabled when it should be disabled during the flash process.
Fixed an issue where there were no separator lines in the Software Flash display during the flash process.
Fixed an issue where there was a duplicate 'English' option in the Language selection menu under certain conditions.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 1

Vehicles Affected:

RoGator: 994, 994H, 1194, 1194H
RoGator: 1396
General:

Vehicle version 1.0.
Initial release of 994, 994H, 1194, 1194H, 1396 content.
Software:

Initial release with AGCOMMAND v1.6.
Diagnostic Trouble Codes:

Initial release of English fault trees.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 2

Vehicles Affected:

TerraGator: 6303, 8303
General:

Vehicle version 1.7.
Removed duplicate diagnostic connection to AGCOMMAND plugin.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 3

Vehicles Affected:

Challenger: 660B-670B-680B
Fendt: 9300-9350-9460
Gleaner: A66-A76-A86
Massey Ferguson: 9695-9795-9895
General:

Vehicle version 0.13.
Software:

Software Package 1.5.4.1
EMU - 3.03 b33
LL - 2.01 b46
BB - 1.01 b7 (same as 1.5.3)
Engine Gateway - no software packaged in 1.5.4.1 Use package 1.5.0 if Engine gateway software is required for CL8.


Vehicle Functionality Changes
Add control of Dynaflex header pitch.
Grain header reset to 100% after header is raised above working height.
Language pack 1 included with EMU v3.03 b33 by default.
Diagnostic Trouble Codes:

Initial release of German, Spanish, French, Polish, and Russian fault trees.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 4

Vehicles Affected:

Gleaner: R66, R76
General:

Vehicle version 0.14.
Known Issues:

System-150 v2.04.19 software flash does not write R66/R76 steering profile into GX-45 terminal. Steering profile is written to USB by EDT, but must be manually retrieved from USB stick following System-150 flash.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 5

Vehicles Affected:

Challenger: MT540, MT560, MT570, MT580
Massey Ferguson: 7350, 7370, 7390, 7415
Valtra: BT150, BT170, BT190, BT210
General:

Vehicle version 2.4.
Configuration:

Internal: Transmission Label code B is equal to 3 by default.
Diagnostic Trouble Codes:

Partial help files in Portuguese language.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 6

Vehicles Affected:

Valtra: S232, S352
General:

Vehicle version 2.4.
Configuration:

Added Access to the Change DCC hour for distributors.
Fixed change ID valve error.
Added Steering valve parameter update.
AG 150 plug-in:

New: Update 1.4.

--------------------------------------------------------------------------------

Release Notes - 9/2/2010 (Update 0044)

CONTENT UPDATES - Part 1

Vehicles Affected:

Gleaner: R66, R76
General:

Combine vehicle version 0.13
Initial release of R66/R76 vehicle with diagnostic surfaces
Initial Release of System-150 v2.04.19
Initial Release of AGCOMMAND
Software:

V1.0.0.0 vehicle software bundle:
EIP - v2.8
Fuse Panel - v2.4
Sisu Engine v2.5.0.4
C2000 Terminal v1.6.9 (includes CIC v6.00)
Known Issues:

System 150 software flash bundle does not include R66/R76 steering profile. Steering profile is written to USB by EDT but must be manually imported into GX-45.

--------------------------------------------------------------------------------

Release Notes - 8/14/2010 (Update 0043)

EDT UPDATES

Updated Sontheim DataCollection to v1.07.0204.
Updated WinEEM3 to v1.2.1.0.
Fixed an issue where a bad stored proxy setting could not be reset.
Fixed an issue when two instances of EDT are started the "EDT Already Running" warning dialog did not have any text.
CONTENT UPDATES - Part 1

Vehicles Affected:

Challenger: MT700 C Series, MT800 C Series, MT900 C Series
Diagnostic Trouble Codes:

Added Translated Fault Trees in other languages.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 2

Vehicles Affected:

TerraGator: 6303, 8303
General:

Updated AGCOMMAND content to v1.6.
Configuration:

Added a link to transmission calibration instructions after Vehicle Configuration.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 3

Vehicles Affected:

Challenger: MT540, MT560, MT570, MT580
Massey Ferguson: 7350, 7370, 7390, 7415
Valtra: BT150, BT170, BT190, BT210
General:

Vehicle version: 2.2
Added Valtra and Challenger brand vehicles
Diagnostic Surface:

Crown wheel speed value in the graphical element fixed.
Configuration:

New label code filter.
Flash:

DCC V1.50
Diagnostic Trouble Codes:

Clear error code of Auto5 fixed.
Transmission code description fixed.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 4

Vehicles Affected:

AGCO: DTb Series
Challenger: MT600 C Series
Massey Ferguson: 8600 Series
General:

Vehicle version: 2.2
Added a new connection to allow you to diagnose and set your AG150 system.
Configuration:

Parameters files path fixed.
AGCO and dealer access fixed in configuration script.
Added the reading of Auxiliary valve parameters.
Flash:

Regression on the CCD zip file in update#40 fixed.
Standardized the Status and Error description messages.
Displaying software version available in Sisu package according to the model selected.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 5

Vehicles Affected:

Valtra: S232, S352
General:

Vehicle version: 2.2
Added a new connection to allow you to diagnose and set your AG150 system.
Diagnostic Surface:

Added Twin Trac - Controller View.
Configuration:

Parameters files path fixed.
AGCO and dealer access fixed in configuration script.
Added the reading of Auxiliary valve parameters.
Flash:

Standardized the Status and Error description messages.
Displaying software version available in Sisu package according to the model selected.
Diagnostic Trouble Codes:

Twin Trac
Added the reading of Active and Stored codes.
Added the clearing of auxiliary spool valve stored codes.
TT and Armrest
Added diagnostic tree.

--------------------------------------------------------------------------------

Release Notes - 6/23/2010 (Update 0041)

CONTENT UPDATES - Part 1

Vehicles Affected:

TerraGator: 6303, 8303
Diagnostic Trouble Codes:

Added DCC3 Fault Trees
Added Auto4 - Transmission Fault Trees
Added Sisu EEM3 Fault Trees

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 2

Vehicles Affected:

Challenger: 660B-670B-680B
Fendt: 9300-9350-9460
Gleaner: A66-A76-A86
Massey Ferguson: 9695-9795-9895
General:

Vehicle version 0.10
Vehicle Functionality Changes:

Add control of Dynaflex header pitch
Grain header reset to 100% after header is raised above working height.
Software: Flash package 1.5.4.0

EMU - 3.03 b33
LL - 2.01 b46
BB - 1.01 b7 (same as 1.5.3)
Engine Gateway - no software packaged in 1.5.4. Use package 1.5.0 if Engine gateway software is required for CL8

--------------------------------------------------------------------------------

Release Notes - 6/11/2010 (Update 0040)

CONTENT UPDATES

Vehicles Affected:

AGCO: DTb Series
Challenger: MT600 C Series
Massey Ferguson: 8600 Series
Software:

Added missing steering valve software.

--------------------------------------------------------------------------------

Release Notes - 6/3/2010 (Update 0039)

EDT UPDATES

Removed the scrollbar on the Network Summary grid.
CONTENT UPDATES - Part 1

Vehicles Affected:

TerraGator: 6303, 8303
Initial Release


--------------------------------------------------------------------------------

CONTENT UPDATES - Part 2

Vehicles Affected:

AGCO: DTb Series
Challenger: MT600 C Series
Massey Ferguson: 8600 Series
Valtra: S232, S352
Network:

Reading version of EEM3 (Engine) and DCU (urea module) controllers are available.
Diagnostic Surfaces:

Air pressure scale value fixed.
Configurations:

Change DCC hour
Reset service maintenance hour
Label code / Constant table layout
Mode offline
Parameters V4 of the steering valve PVED-CL
Software:

Parklock V2.14.0
Double checking to unlock the parklock
Reversed post compatibility
Italia brake corrective
DCC V0.1.7.0
Double checking to unlock the parklock
Float state condition of valve 1 and 2 - corrective
EEM3 controller is now flashable through EDT
Diagnostic Trouble Codes:

Description of auxiliary spool valves
Active and passive reading of auxiliary spool valves
Clear codes of auxiliary spool valves

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 3

Vehicles Affected:

Valtra: S232, S352
Network:

Suspended cabin controller (detection and reading version)
Reading version of EEM3 (Engine) and DCU (urea module) controllers are available.
Diagnostic Surfaces:

Air pressure scale value fixed.
2 Suspended cab surface
Configurations:

Change DCC hour
Reset service maintenance hour
Table constant os Suspended cab
Label code / Constant table layout
Mode offline
Parameters V4 of the steering valve PVED-CL
Software:

Parklock V2.14.0
Double checking to unlock the parklock
Reversed post compatibility
Italia brake corrective
EEM3 controller is now flashable through EDT
Terminal Tractor (Sw: V2.2.9.0 Par: V5.3.0.6)
Suspended cab V0.1.0
Diagnostic Trouble Codes:

New Suspended cab controller
Active and passive codes reading
Clear codes of auxiliary spool valves

--------------------------------------------------------------------------------

Release Notes - 5/15/2010 (Update 0038)

EDT UPDATES

Windows 7 64-bit is now supported.
Fixed EDT Lite installer top progress bar to display progress correctly after first cab extraction.
Added an option on EDT Utilities to create an EDT Lite Installer
Added an option on EDT Utilities to reinstall hardware drivers.
Fixed some minor UI issues with EDT Lite Creator.
Fixed Network Summary grid so it is not editable and removed row selectors.
Fixed FaultTree search to fall-over to English, if specified language is not found.
Added a popup to tell user that EDT is waiting on another application when using an external application for flashing or diagnostics.
CONTENT UPDATES - Part 1

Vehicles Affected:

Massey Ferguson: 7350-7370-7390-7415
Fault Trees:

Fixed bad image links on two fault tree files.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 2

Vehicles Affected:

Challenger: MT300B
Massey Ferguson: 3625-3635-3645
General:

Initial Release

--------------------------------------------------------------------------------

Release Notes - 4/26/2010 (Update 0037)

CONTENT UPDATES - Part 1

Vehicles Affected:

Massey Ferguson: 7350-7370-7390-7415
Diagnostic Surface:

Bug: PTO - controller view in diagnostic surface fixed
Bug: Voltage surface bug fixed
Configuration:

New: Help files (Calibration / Configuration)
New: DCC hour
Bug: Auto5 detection loop fixed
Calibration:

New: Help files
Flash:

New: DCC V1.40
Diagnostic trouble codes:

New: Displaying Filter
Bug: Auto5 detection loop fixed

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 2

Vehicles Affected:

Challenger: 660B-670B-680B
Fendt: 9300-9350-9460
Gleaner: A66-A76-A86
Massey Ferguson: 9695-9795-9895
Software:

Language Package Flash correction

--------------------------------------------------------------------------------

Release Notes - 3/18/2010 (Update 0036)

EDT UPDATES

Fixed an issue with the EDT Lite Creator not working with internal voucher codes.
Fixed an issue with the EDT Lite installation reporting an failure during the installation.
CONTENT UPDATES - Part 1

Vehicles Affected:

AGCO: DTb Series
Challenger: MT600 C Series
Massey Ferguson: 8600 Series
Valtra: S232, S352
Calibrations:

Auto calibration of steering valve available
Throttle pedal and right lever calibration values were lost after writing DCC lable codes have been fixed

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 2

Vehicles Affected:

AGCO: 8100, 8200, 8300, 8500, 8700, 8800 Planters
Challenger: 8100, 8200, 8300, 8500, 8700, 8800 Planters
Massey Ferguson: 8100, 8200, 8300, 8500, 8700, 8800 Planters
White: 8100, 8200, 8300, 8500, 8700, 8800 Planters
General:

Initial EDT Release

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 3

Vehicles Affected:

RoGator: 2007-2010 Airmax 180, 2007-2010 Liquid System, 2007-2010 Spinner
SpraCoupe: SpraCoupe 7000 Series
TerraGator: 2004-2010 Airmax, 2004-2010 AirSpread Twin Bin 4-Bin Soilection, 2004-2010 Liquid System, 2004-2010 Spinner
General:

Initial EDT Release

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 4

Vehicles Affected:

Challenger: 660B-670B-680B
Fendt: 9300-9350-9460
Gleaner: A66-A76-A86
Massey Ferguson: 9695-9795-9895
Telephone Based Authorizations

VIN Surface - Used to change region code and VIN number as necessary. Requires call into AGCO service personnel for authorization code.
Threshing Hours, harvest area and volume - New surface to display current values. Can also use to reset the values if necessary. Requires call into AGCO service personnel for authorization code.
AGCOMMAND Integration

AGCOMMAND ECU integrated into Combine vehicles on own diagnostic channel and includes two surfaces.
Combine network scan includes AGCOMMAND Ecu at address 74 and EDT diagnostic tool at address 249.
Software: Flash package 1.5.3.0

Software versions as follows:
EMU - 3.03 b29
LL - 2.01 b45
BB - 1.01 b7
Engine Gateway - no software packaged in 1.5.3. Use package 1.5.0 if Engine gateway software is required for CL8
Vehicle Functionality Changes
Region codes are now NA, EU - 20, EU - 25
For EU - 20 and EU - 25 region codes, the rear work lights will not operate when in transport mode
mVEC offline errors moderated
Speed alarm corrections for variable header speed and Chopper
Fuel Level sender software changed to improve response and range. The fuel sender reports 0% fuel remaining when sensor voltage is 0.5V. Previous versions used 0.25V as 0%. Also, 100% is reported when the fuel sender is at 4.5V, versus 4.75V for previous software versions.
mVEC diagnostic view descriptions corrected
Grain Tank Cover button only visible if covers installed
DTC codes for header height, speed sensor and VMM power turned ON
Harvest Data
Task Controller data improvements
Field Average moisture added and calculation changed
Moisture alarm value increased to 40%
Moisture offset valid range is -40% to 40%
Better data synchronization between harvest data and task controller
"Lag Time" variable improved to capture grain "in process" at end of rows
Known Issues
DTC codes - if a header calibration is performed on a combine without the lateral tilt option, the DTC code of 520266 FMI 5 (Tilt Right valve OPEN) or DTC code of 520264 FMI 5 (Tilt Left valve OPEN). The codes are momentary and will not be stored.
Fuel Level sensor will report 0% with a larger fuel reserve available owing to increasing the lower voltage from 0.25V to 0.5V. Slightly longer run time will be available at 0% as a result. Fuel warnings still begin at below 10% remaining.

--------------------------------------------------------------------------------

Release Notes - 2/26/2010 (Update 0033)

CONTENT UPDATES

Vehicles Affected:

AGCO: DTb Series
Challenger: MT600 C Series
Massey Ferguson: 8600 Series
Valtra: S232, S352
Calibrations:

Auto calibration of steering valve available

--------------------------------------------------------------------------------

Release Notes - 2/11/2010 (Update 0032)

EDT UPDATES

Implemented AGCO Authorization Center
Implemented translated EDT Release Notes
Updated Sontheim DataCollection to v1.06.0407.
Added additional brand buttons:
ATS
RoGator
SpraCoupe
TerraGator
White Planter
CONTENT UPDATES - Part 1

Vehicles Affected:

Massey Ferguson: 7350-7370-7390-7415
General:

Initial EDT Release

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 2

Vehicles Affected:

AGCO: DTb Series
Challenger: MT600 C Series
Massey Ferguson: 8600 Series
Files:

ODX Files : J1939_DM1-DM3_Multi_RQ_8b.odx / J1939_DM1-DM3_RQ_8b.odx
Parameter files : ParAuto5_011_Table_3.par / CodeAuto5_024_Table_1.par / New file for BX181 project
Dll files : MF_Activity.dll V2.5.3.0 / MF_FonctionDcc.dll V1.0.0.0 / MF_FonctionLM.dll V1.1.0.0
Diagnostic Surface:

Passive suspended cab icon update
Light module update page (light location)
Network Summary:

Auxiliary spool valve version reading (Hardware and Software)
Configuration:

VIN update (Current VIN = New VIN by default)
Flash:

Auxiliary spool valve package V2.60
DCC V1.6.0
Light module V1.6.0
CCD V1.40
Diagnostic trouble codes:

Description of auxiliary spool valves
Active and passive reading of auxiliary spool valves
Clear codes of auxiliary spool valves

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 3

Vehicles Affected:

Valtra: S232, S352
Files:

ODX Files : J1939_DM1-DM3_Multi_RQ_8b.odx / J1939_DM1-DM3_RQ_8b.odx
Parameter files : ParAuto5_011_Table_3.par / CodeAuto5_024_Table_1.par / New file for BX181 project
Dll files : MF_Activity.dll V2.5.3.0 / MF_FonctionDcc.dll V1.0.0.0 / MF_FonctionLM.dll V1.1.0.0
Diagnostic Surface:

Light module update page (light location)
Network Summary:

Auxiliary spool valve version reading (Hardware and Software)
Configuration:

VIN update (Current VIN = New VIN by default)
Flash:

Auxiliary spool valve package V2.60
Light module V1.6.0
Diagnostic trouble codes:

Description of auxiliary spool valves
Active and passive reading of auxiliary spool valves
Clear codes of auxiliary spool valves

--------------------------------------------------------------------------------

Release Notes - 1/21/2010 (Update 0030)

EDT UPDATES

Minor Fault tree changes to support Unicode languages.
Network Summary grid column label changed from "Current Version" to "Latest Version".
Updated Sontheim DataCollection to v1.06.0405.
CONTENT UPDATES

Vehicles Affected:

Challenger: MT700 C Series, MT800 C Series, MT900 C Series
Software Update:

Lighting
Transmission
Slip control fixed added filtering when is no slip condition
SCGS fixed
Increased deadband for hitch

--------------------------------------------------------------------------------

Release Notes - 11/17/2009 (Update 0027)

EDT UPDATES

Sisu Diesel WinTestWinEEM3s has been updated and renamed to EDTWinEEM3s (1.2.0.2)
Picture Control CheckBox button fixes
Convert Units abbreviation bug fixed
Fixes and Enhancements for SystemCheck
Fixed issue with image aspect ratio on function selection page
Digital Display precision fix
Analog Graph scale fix
CONTENT UPDATES - Part 1

Vehicles Affected:

AGCO: DTb Series
Challenger: MT600 C Series
Massey Ferguson: 8600 Series
Software:

Armrest Software V0.1.3.0
Parklock Software V0.2.13.0
Load Battery Management
Configuration:

PVED-CL Parameter script update.
New parameter without Dead Band
New parameter file for Armrest
New parameter file for Park lock
Diagnostic Trouble Codes:

DCC Active codes have been removed. Please use stored codes list.
Description of Auto4 trouble codes have been updated
Code 246 & 247 - added (Calibration failed)
Light Module trouble codes are available in Diagnostic surface and DTC tab
Updated Fault Tree Images - Higher Resolution
Diagnostic Surface:

Active suspended cab position was changed.
Passive suspended cab, wrong sensor value corrected
Evaporator sensor / Evaporator Units changes
Added Offline mode in Linkage, Hydraulic and suspended cab Diagnostic surface
Engine Values changes

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 2

Vehicles Affected:

Valtra: S232, S352
Software:

Armrest Software V0.1.3.0
Parklock Software V0.2.13.0
Load Battery Management
Configuration:

PVED-CL Parameter script update.
New parameter without Dead Band
New parameter file for Armrest
New parameter file for Park lock
Updated "Get an Auto5 spare part" script to fix "Invalid file " message
Moved Label code / Table constant setting Linkage From Connection 2 to Connection
Diagnostic Trouble Codes:

DCC Active codes have been removed. Please use stored codes list.
Description of Auto4 trouble codes have been updated
Light Module trouble codes are available in Diagnostic surface and DTC tab
Diagnostic Surface:

Evaporator sensor / Evaporator Units changes
Added Offline mode in Linkage, Hydraulic and suspended cab Diagnostic surface
Engine Values changes

--------------------------------------------------------------------------------

Release Notes - 9/30/2009 (Update 0025)

CONTENT UPDATES - Part 1

Vehicles Affected:

AGCO: DTb Series
Challenger: MT600 C Series
Massey Ferguson: 8600 Series
Valtra: S232, S352
Software:

Parklock Software V0.2.12.0
Suspended Cab Software V0.1.4.0
Light Module Software V0.1.5.0

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 2

Vehicles Affected:

Challenger: MT700 C Series
Software:

Fixed bad terminal software flash file with correct file

--------------------------------------------------------------------------------

Release Notes - 9/18/2009 (Update 0024)

EDT UPDATES

Fix for updates that fail on localized XP installation other than English
CONTENT UPDATES

Vehicles Affected:

Challenger: 660B-670B-680B
Fendt: 9300-9350-9460
Gleaner: A66-A76-A86
Massey Ferguson: 9695-9795-9895
Software: Flash package 1.5.2.0

Shaft alarms issues resolved
Tire perimeter was not saving
Max header width allowed is 120 ft
Address claim responds with AGCO as manufacturer
Average moisture change
Task total time is sent
Counter 3 renamed as "Field"
Yield average displayed on work screen as average from "Field" counter
Yield calibration uses calibration value in "measured" value to allow calibration refinements
New yield calibration reject/accept screen
Task totals sent at 2 second intervals to allow task data to be current
Engine Gateway - no changes. If engine gateway software is required, please use earlier package and flash Engine Gateway only

--------------------------------------------------------------------------------

Release Notes - 9/9/2009 (Update 0023)

EDT UPDATES

Added translated strings for EDT Utilities
Screenshots and SystemCheck only upload to AGCO servers when specified
Domain was added as an option to the proxy request for license update server.
CONTENT UPDATES - Part 1

Vehicles Affected:

AGCO: DTb Series
Challenger: MT600 C Series
Massey Ferguson: 8600 Series
Valtra: S232, S352
DLL:

New Activity.dll V1.27.0.1
Diagnostic Surface:

Gearbox overview update
Engine surface (Toll tip throttle pedal)
Electronic View : Gearbox & Linkage drawing update
Linkage surface : Add signal Hydraulic Temperature sensor
Gearbox surface: Add Speed increment signal
Calibration:

Add Wheel Angle Sensor (WAS) script
Add Steering Valve (PVED-CL) script
Configuration:

Change VIN script (Minor bug)
Change PVED-CC script? (Minor bug)
Add PVED-CL script to set parameter
Change Auto4 script to detect Auto4 update from V0.1.0.0 to V0.1.10.0
Parameter Files:

New ParAuto4_DTM.par
Flash:

Sisu package V2.5.2.2: wrong hex file with biggest model
Add message to select the CAN3 when EEM3 opens
Add PVED-CL script to flash steering valve V1.35
Update Auto4 script to detect update from V0.1.0.0 to V0.1.10.0
DTC:

Change active and stored code condition of the A4 + add Code Actif / code Stored Check Box
Update PVED-CC & CL script
Connector Column? (Minor bug)
A4 reading compatibility with 1.52
Auto4 : minor bug about displaying information icon
Air conditionning : minor bug about the description
Add Code 4101 in the table

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 2

Vehicles Affected:

Challenger: 660B-670B-680B
Fendt: 9300-9350-9460
Gleaner: A66-A76-A86
Massey Ferguson: 9695-9795-9895
Software:

Flash package 1.5.0.1 is added as a Ladder logic flash only to correct the display of the Dynaflex Cutterbar pressure. This package requires flash package 1.5.0 to be installed.

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 3

Vehicles Affected:

AGCO: Legacy Steering SubSystem Support
Challenger: Legacy Steering SubSystem Support
Gleaner: Legacy Steering SubSystem Support
Massey Ferguson: Legacy Steering SubSystem Support
General:

Initial EDT Release

--------------------------------------------------------------------------------

Release Notes - 8/26/2009 (Update 0022)

EDT UPDATES

Keyboard button functions correctly on the EDT Utility forms
Clicking View Uploads with no previous uploads now correctly displays the upload log
Network Settings save correctly.
CONTENT UPDATES - Part 1

Vehicles Affected:

Challenger: MT700 C Series, MT800 C Series, MT900 C Series
Software:

New Aux Value software

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 2

Vehicles Affected:

Challenger: 660B-670B-680B
Fendt: 9300-9350-9460
Gleaner: A66-A76-A86
Massey Ferguson: 9695-9795-9895
General:

Brand photos have been corrected

--------------------------------------------------------------------------------

Release Notes - 8/21/2009 (Update 0021)

CONTENT UPDATES

Vehicles Affected:

AGCO: DTb Series
Challenger: MT600 C Series
Massey Ferguson: 8600 Series
Parameter Files:

Updated Parameter files

--------------------------------------------------------------------------------

Release Notes - 8/20/2009 (Update 0020)

EDT UPDATES

EDT 1.52 Release
Release Notes and Fault Tree Viewer now support page zoom and vertical/horizontal scrolling
Increased stability during the flashing of certain controllers
Vehicles can have version numbers displayed
Voucher renewals now support proxy internet connections
An EDT utilities screen has been added with the following utilities:
Screenshots
Send System Information
Release Notes
Task Manager
Send Feedback
Hide EDT
Network Settings (Proxy Configuration)
Shut down PC
CONTENT UPDATES - Part 1

Vehicles Affected:

Valtra: S232, S352
General:

Initial EDT Release

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 2

Vehicles Affected:

Challenger: MT700 C Series, MT800 C Series, MT900 C Series
Network Scan:

Reports only physically connected controllers
Increased responsiveness when querying for hardware and software
Configuration:

Writes only parameters that have been changed
Software:

Aux Values restores parameters after flashing
PVED-CL writes factory parameters after flashing
New software updates for most controllers

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 3

Vehicles Affected:

Challenger: 660B-670B-680B

Fendt: 9300-9350-9460

Gleaner: A66-A76-A86

Massey Ferguson: 9695-9795-9895
Diagnostic Surface:

Engine
Rigid/Flex Header
Dynaflex Header
Powerflow Header
Pickup Header
Rotor
Cleaning Shoe
Grain Bin
Lighting
Software Update:

Combine Package 1.5.0 (requires version 1.4.1 or later to be installed)
Corrections to Task Controller Data
Task Controller includes Sieve and Chaffer Settings
Reel Speed manual mode no longer requires reel calibration.?
Automatic mode continues to require calibration.
Yield accuracy improved
Alarms added for? movement of concave, sieve and chaffer
MVEC Offline alarms corrected
Unloader engage implements engine boost curve
Flash process improved
Sisu Engine
Sisu Engine Flash package version 2.5 for improved engine performance

--------------------------------------------------------------------------------

Release Notes - 7/8/2009 (Update 0018)

CONTENT UPDATES

Vehicles Affected:

AGCO: DTb Series
Challenger: MT600 C Series
Massey Ferguson: 8600 Series
Software:

DCC software V1.5.0 (dependency with A4 V1.1.0)
Auto4 software V1.1.0 (dependency with DCC V1.5.0)
Sisu software V2.5.2.2
DLL:

New Activity.dll V1.24.1.1 with new choice (Gearbox HA260F)
Parameter Files:

New CodeAuto5_011_Table_3.par Code AA renamed in Parklock
All parameter files of Auto4
New Codedcc3.par

--------------------------------------------------------------------------------

Release Notes - 6/12/2009 (Update 0016)

EDT UPDATES

Fixed the scrolling in fault tree pages
Vehicles Affected:

AGCO: DTb Series
Challenger: MT600 C Series
Massey Ferguson: 8600 Series

--------------------------------------------------------------------------------

Release Notes - 6/9/2009 (Update 0015)

EDT UPDATES

Added an initial fix for proxy authentication during the vouchering process
Enhanced fault tree index lookups
CONTENT UPDATES - Part 1

Vehicles Affected:

AGCO: DTb Series
Challenger: MT600 C Series

Massey Ferguson: 8600 Series
Diagnostic Surface:

Passive Suspended Cab update
Add script in Linkage - ECU view
Configuration:

Export Grid button functionality in Table Constant
Displaying Progress and Status in A5 Spare part script
Code AA renamed in Parklock
Software:

Add new condition in the script to display list of choice
New DCC software V1.30
New Data 4 (A5 Terminal) Software V1.30
DTC:

Export Grid button functionality to the DTC surface
Reset A5 bug fixed
DLL:

New Activity.dll V1.20.0.1 to fix PTO bug
Parameter Files:

New CodeAuto5_011_Table_3.par & ParAu_to5_011_Table_3.par for the Parklock
5 new parameter files of the Armrest
Fault Trees:

New Fault Trees in multiple Target Languages

--------------------------------------------------------------------------------

CONTENT UPDATES - Part 2

Vehicles Affected:

Challenger: 660B-670B-680B

Fendt: 9300-9350-9460

Gleaner: A66-A76-A86

Massey Ferguson: 9695-9795-9895
Configuration:

Fixed a background color rendering issue on some surfaces

--------------------------------------------------------------------------------

Release Notes - 6/3/2009 (Update 0014)

CONTENT UPDATES

Vehicles Affected:

Challenger: 660B-670B-680B

Fendt: 9300-9350-9460

Gleaner: A66-A76-A86

Massey Ferguson: 9695-9795-9895
Network Scan:

MVEC 3 now shows on all vehicles and EMU queried to determine if this is an optional module or required if power bin covers is installed
Configuration:

VIN Configurations
Combine Setup
Software:

Added Software Flash package 1.4.1
Includes vehicle language packages
Support for CE Lighting homologation requirements
Cab EMU supports flash of existing cab module, new blank module, or Engine gateway used in cab location.
Engine Gateway Module supports flash of existing gateway module, new blank module, or cab module used in engine location

--------------------------------------------------------------------------------

Release Notes - 5/6/2009 (Update 0012)

CONTENT UPDATES

Vehicles Affected:

AGCO: DTb Series
Challenger: MT600 C Series

Massey Ferguson: 8600 Series
Diagnostic Surface:

Activation of Diagnostic mode of Suspension Cab upon opening surface: ECU and Overview
Modification in Voltage Diagnostic Surface (Engine running message and Auto5 reset without save on closing surface)
Lighting Module Modification (Diagnostic Surface)
Configuration:

Level access (based on the dealer code) implemented in Table Constant and DCC vehicle hour configuration
Fast steering script (modified to make calibration with release version 1.25)
Software:

Light Module V1.4.0
A5 Armrest V1.1.0
Sisu Tiers 2 software (V2.5.0.0.zip)
Added new message box in flash script
Proper Success or Failed result were not set in all flash scripts
DTC:

A4 & DCC Modifications
DLL:

MF_Activity.dll / FonctionAuto5.dll updated
Parameter Files:

A5-Armrest (3 files updated)
ParAuto4_DTM.par

--------------------------------------------------------------------------------

Release Notes - 4/20/2009 (Update 0010)

CONTENT UPDATES

Vehicles Affected:

Challenger: MT700 C Series, MT800 C Series, MT900 C Series
Software:

Updated C1000 Software

--------------------------------------------------------------------------------

Release Notes - 4/7/2009 (Update 0009)

EDT UPDATES

EDT Lite Licensing Issue Corrected
CONTENT UPDATES

Vehicles Affected:

AGCO: DTb Series
Challenger: MT600 C Series
Massey Ferguson: 8600 Series
General:


Updated content in various places

--------------------------------------------------------------------------------

Release Notes - 3/25/2009 (Update 0007)

EDT UPDATES

New translated strings
CONTENT UPDATES - Part 1

Vehicles Affected:

Challenger: 660B-670B-680B

Fendt: 9300-9350-9460

Gleaner: A66-A76-A86

Massey Ferguson: 9695-9795-9895
General:

Software Updates
CONTENT UPDATES - Part 2

Vehicles Affected:

AGCO: DTb Series
Challenger: MT600 C Series

Massey Ferguson: 8600 Series
General:


Initial Release
CONTENT UPDATES - Part 3

Vehicles Affected:

Challenger: MT700 C Series, MT800 C Series, MT900 C Series
General:

Software Updates
Updated Configurations

--------------------------------------------------------------------------------

Release Notes - 2/11/2009 (Update 0006)

CONTENT UPDATES

Vehicles Affected:

Challenger: MT700 C Series, MT800 C Series, MT900 C Series
General:

Software Updates
Updated Configurations

--------------------------------------------------------------------------------

Release Notes - 2/9/2009 (Update 0004)

CONTENT UPDATES

Vehicles Affected:

Challenger: MT700 C Series, MT800 C Series, MT900 C Series
General:

Fault Tree Updates

--------------------------------------------------------------------------------

Release Notes - 1/12/2009 (Update 0001)

CONTENT UPDATES

Vehicles Affected:

Challenger: MT700 C Series, MT800 C Series, MT900 C Series
General:

Software Updates
Updated Configurations

--------------------------------------------------------------------------------
 
Last edited by a moderator:
Top