Garage

Joined
Likes
88
Gallons
0

VCDS lite v.1.2 Full Activated

#1
Download this document, you need 300 Gallons
Download Now
VCDS lite v.1.2 Full Activated

VCDS-Lite is a Windows-based Diagnostic tool for VW/Audi/Seat/Skoda for non-dongle interfaces. With VCDS-Lite you can do an automatic scan of all controllers for Fault Codes. Also, you can select an individual Control Module such as Engine, ABS or Airbag.

Works with simple K-Line/KL line/KKL-Line/VAG-COM 311/VAG-COM 409 interfaces (ISO 9141-2 protocol)

Instruction Installation:

Works with simple K-Line/KL line/KKL-Line/VAG-COM 311/VAG-COM 409 interfaces (ISO 9141-2 protocol)

Important!
Disable antivirus software (false positive) before start install !

"For activation need to make full Auto-Scan in a car and then it will be fully registered/activated"

VCDS-LiteWindows-based Diagnostic Software
for VW / Audi / Seat / Skoda
for generic 3rd-party interfaces


VCDS-Lite is our low cost solution for older (pre-2006) VW-Audi Group cars that do not require a direct CAN diagnostic connection.

The free shareware version does quite a lot and it's, well, free.

The fully registered version does pretty much everything the older dealers' tools could do on those cars, but even when fully registered, it will not have quite all of the functions that the full (non-lite) version of VCDS would provide.

Some of the differences between versions and between the free VCDS-Lite Shareware and the Fully Registered version:

Free Shareware:

Cannot do AutoScan
Won't display text for all fault codes
No Basic Settings (so no TBA, Xenon leveling, etc or checking timing on TDI's)
No Adaptation Saving (so no changing of locking/lights/horn behavior)
No Output Tests
No tech support from Ross-Tech Limitations of VCDS-Lite compared to VCDS even if Fully Registered:
No Generic OBD-II
Won't work with CAN-Bus vehicles
Fewer fault code definitions and label files
No built-in Activation (you'll be limited to a single PC)
No Advanced Measuring Blocks
No Acceleration Measurement

 

ondia69

New Member
Joined
Likes
0
Gallons
0
#6
VCDS lite v.1.2 Full Activated

VCDS-Lite is a Windows-based Diagnostic tool for VW/Audi/Seat/Skoda for non-dongle interfaces. With VCDS-Lite you can do an automatic scan of all controllers for Fault Codes. Also, you can select an individual Control Module such as Engine, ABS or Airbag.

Works with simple K-Line/KL line/KKL-Line/VAG-COM 311/VAG-COM 409 interfaces (ISO 9141-2 protocol)

Instruction Installation:

Works with simple K-Line/KL line/KKL-Line/VAG-COM 311/VAG-COM 409 interfaces (ISO 9141-2 protocol)

Important!
Disable antivirus software (false positive) before start install !

"For activation need to make full Auto-Scan in a car and then it will be fully registered/activated"

VCDS-LiteWindows-based Diagnostic Software
for VW / Audi / Seat / Skoda
for generic 3rd-party interfaces


VCDS-Lite is our low cost solution for older (pre-2006) VW-Audi Group cars that do not require a direct CAN diagnostic connection.

The free shareware version does quite a lot and it's, well, free.

The fully registered version does pretty much everything the older dealers' tools could do on those cars, but even when fully registered, it will not have quite all of the functions that the full (non-lite) version of VCDS would provide.

Some of the differences between versions and between the free VCDS-Lite Shareware and the Fully Registered version:

Free Shareware:

Cannot do AutoScan
Won't display text for all fault codes
No Basic Settings (so no TBA, Xenon leveling, etc or checking timing on TDI's)
No Adaptation Saving (so no changing of locking/lights/horn behavior)
No Output Tests
No tech support from Ross-Tech Limitations of VCDS-Lite compared to VCDS even if Fully Registered:
No Generic OBD-II
Won't work with CAN-Bus vehicles
Fewer fault code definitions and label files
No built-in Activation (you'll be limited to a single PC)
No Advanced Measuring Blocks
No Acceleration Measurement

Thanks!
 
Top